Potassium‐, Ammonium‐, Hydrazinium‐, Guanidinium‐, Aminoguanidinium‐, Diaminoguanidinium‐, Triaminoguanidinium‐ and Melaminiumnitroformate – Synthesis,Characterization and Energetic Properties

Energetic salts containing the nitroformate (trinitromethanide) anion with several nitrogen‐rich cations were investigated, including ammonium nitroformate (ANF), melaminium nitroformate (MNF), guanidinium nitroformate monohydrate (GNFH), aminoguanidinium nitroformate (AGNF), diaminoguanidinium nitroformate (DAGNF) as well as triaminoguanidinium nitroformate (TAGNF). All salts were characterized using vibrational spectroscopy (IR, Raman), mass spectrometry, multinuclear NMR spectroscopy and elemental analysis. The thermal decomposition of the salts was monitored using differential scanning calorimetry. In addition, the impact, friction and electrostatic sensitivity data were determined. Theoretical calculations were carried out in order to predict performance data such as detonation velocities and detonation pressures. The crystal structures of ANF, MNF, GNFH, AGNF, DAGNF and TAGNF were determined using single crystal X‐ray diffraction. In addition, a second polymorph of MNF was determined crystallographically as well as the crystal structures of MNF with methanol and MNF with dimethylsulfoxide. Finally, new polymorphs of potassium nitroformate (KNF) and hydrazinium nitroformate (HNF) were characterized using single crystal X‐ray diffraction.     

Ammine Complexes of Na‐, Ag‐, Mn‐, and Zn‐Azides

The synthesis of ammine metal azides is achieved through a simple route in liquid ammonia solution. Azides of silver, sodium, manganese, and zinc were obtained as ammine complexes from liquid ammonia and the solid compounds were characterized. The NH₃ solutions were investigated by means of NMR spectroscopy as well. The triamminesilver(I) azide as well as the unusual tetraamminesilver(I) and pentaamminesodium(I) azides are presented. The structures of the hexaamminemanganese(II) and hexaamminezinc(II) azides, which crystallize with four ammonia molecules of solvation, are elucidated. From these compounds the binary azides Mn(N₃)₂ and Zn(N₃)₂ were obtained by (careful) heating.     

Syntheses and properties of tetraaza‐, diaza‐, tetraoxa‐, and dioxa‐metacyclophanes

Metacyclophanes were prepared by cyclization reactions between bis(chloromethyl) compounds and piperazine, primary amines, or ethylene glycol. The ¹H nmr relaxation time (T₁) measurements indicated that the macrocycles feature the up and down motion of the aromatic units around the XCH₂Ar (X = N, O) methylene moieties as the axes. Metacyclophanes incorporating piperazine units showed high complexation ability for alkaline metal cations.     

Enantio‐, Regio‐, and Chemoselective Lipase‐Catalyzed Polymer Synthesis

In contrast to chemical routes, enzymatic polymerization possesses favorable characteristics of mild reaction conditions, few by‐products, and high activity toward cyclic lactones which make it a promising technique for constructing polymeric materials. Meanwhile, it can avoid the trace residue of metallic catalysts and potential toxicity, and thus exhibits great potential in the biomedical fields. More importantly, lipase‐catalyzed polymer synthesis usually shows favorable enantio‐, regio‐, and chemoselectivity. Here, the history and recent developments in lipase‐catalyzed selective polymerization for constructing polymers with unique structures and properties are highlighted. In particular, the synthesis of polymeric materials which are difficult to prepare in a chemical route and the construction of polymers through the combination of selective enzymatic and chemical methods are focused. In addition, the future direction is proposed especially based on the rapid developments in computational chemistry and protein engineering techniques.     

Synthesis and Reactivity of 2‐Pyrrolidino‐, 2‐N‐Methylpiperazino‐, 2‐Piperidino‐, and 2‐Morpholino‐1,3,4‐thiadiazines

A variety of 2‐pyrrolidino‐, 2‐N‐methylpiperazino‐, 2‐piperidino‐, and 2‐morpholino‐1,3,4‐thiadiazines were prepared by cyclocondensation of phenacyl halides with thiosemicarbazides. Heating of the products resulted in desulfurization and formation of pyrazoles. The rate of this process strongly depends on the substitution pattern of the 1,3,4‐thiadiazines.     

Anion‐, Solvent‐, Temperature‐, and Mechano‐Responsive Photoluminescence in Gold(I) Diphosphine‐Based Dimers

A series of [Au₂(nixantphos)₂](X)₂ (nixantphos=4,6‐bis(diphenylphosphino)‐phenoxazine; X=NO₃, 1 ; CF₃COO, 2 ; CF₃SO₃, 3 ; [Au(CN)₂], 4 ; and BF₄, 5 ) complexes that exhibit intriguing anion‐switchable and stimuli‐responsive luminescent photophysical properties have been synthesized and characterized. Depending on their anions, these complexes display yellow ( 3 ), orange ( 4 and 5 ), and red ( 1 and 2 ) emission colors. They exhibit reversible thermo‐, mechano‐, and vapochromic luminescence changes readily perceivable by the naked eye. Single‐crystal X‐ray studies show that the [Au₂(nixantphos)₂]²⁺ cations with short intramolecular Au ??? Au interactions are involved as donors in an infinite N?H ??? X (X=O and N) hydrogen‐bonded chain formation with CF₃COO^? ( 2 C ) and aurophilically linked [Au(CN)₂]^? counterions ( 4 C ). Both crystals show thermochromic luminescence; their room temperature red ( 2 C ) and orange ( 4 C ) emission turns into yellow upon cooling to 77 K. They also exhibit reversible mechanochromic luminescence by changing their emission color from red to dark ( 2 C ), and orange to red ( 4 C ). Compounds 1 – 5 also display reversible mechanochromic luminescence, altering their emission colors between orange ( 1 ) or red ( 2 ) to dark, as well as between yellow ( 3 ) or orange ( 4 and 5 ) to red. Detailed photophysical investigations and correlation with solid‐state structural data established the significant role of N?H ??? X interactions in the stimuli‐responsive luminescent behavior.     

The Photophysics of Pyridine‐Derivatized ortho‐, meta‐, and para‐Dibutylamino Cruciforms

The photophysical properties of a series of para‐substituted donor–acceptor cruciform fluorophores ( p 1 – 4 ) were investigated and compared with their meta and ortho isomers ( m 1 – 4 and o 1 – 4 ). The structural variations were found to have a significant effect on the solvatochromism, fluorescence quantum yields (Φ_fl), fluorescence lifetimes (τ_fl), and response upon addition of trifluoroacetic acid. The observed spectral shifts in absorption and emission caused by protonation of the cruciforms make them promising candidates as chemosensors. Additional computational studies provided more insight into the electronic structure of the systems.     

Preparation of 2‐, 4‐, 5‐, and 6‐aminonicotinic acid tert‐butyl esters

Procedures are reported to prepare the tert‐butyl esters of 2‐aminonicotinic acid, 4‐aminonicotinic acid, 5‐aminonicotinic acid, and 6‐aminonicotinic acid from 2‐chloronicotinic acid, 4‐chloronicotinic acid, 5‐bromonicotinic acid, and 6‐chloronicotinic acid, respectively, without need for purification of intermediates. J. Heterocyclic Chem., (2012).     

Ring‐Opening Regio‐, Diastereo‐, and Enantioselective 1,3‐Chlorochalcogenation of Cyclopropyl Carbaldehydes

meso‐Cyclopropyl carbaldehydes are treated in the presence of an organocatalyst with sulfenyl and selenyl chlorides to afford 1,3‐chlorochalcogenated products. The transformation is achieved by a merged iminium–enamine activation. The enantioselective desymmetrization reaction, leading to three adjacent stereocenters, furnished the target products in complete regioselectivity and moderate to high diastereo‐ and enantioselectivities (d.r. up to 15:1 and e.r. up to 93:7).     

Thermochemistry of N‐heterocyclic carbenes with 5‐, 4‐, 3‐, and 2‐membered rings

N‐heterocyclic carbenes (NHCs) based on imidazole‐2‐ylidene ( 1 ) or the saturated imidazolidine‐2‐ylidene ( 2 ) scaffolds are long‐lived singlet carbenes. Both benefit from inductive stabilization of the sigma lone pair on carbon by neighboring N atoms and delocalization of the N pi lone pairs into the nominally vacant p‐pi atomic orbital at the carbene carbon. With thermochemical schemes G4 and CBS‐QB3, we estimate the relative thermodynamic stabilization of smaller ring carbenes and acyclic species which may share the keys to NHC stability. These include four‐membered ring systems incorporating the carbene center, two trivalent N centers, and either a boron or a phosphorus atom to complete the ring. Amino‐substituted cyclopropenylidenes have been reported but three‐membered rings containing the carbene center and two N atoms are not known. Our calculations suggest that amino‐substituted cyclopropenylidenes are comparable in stability to the four‐membered NHCs but that diazacyclopropanylidenes would be substantially less effectively stabilized. Concluding the series are acyclic carbenes with and without neighboring N atoms and a series of “two‐membered ring” azapropadienenylidene cations of form :C?N?W with W = an electron‐withdrawing agent. We have studied W = NO₂, CH₂(+), CF₂(+), and (CN)₂C(+). Although these systems display a degree of stabilization and carbene‐like electronic structure, the stability of the NHCs is unsurpassed. © 2014 Wiley Periodicals, Inc.     

X‐ray photoelectron and carbon Kα emission measurements and calculations of O‐, CO‐, N‐, and S‐containing substances

X‐ray fluorescence measurements for O‐containing [polyethylene oxide, polyvinyl alcohol, polyvinyl methyl ether], CO‐containing [polyvinyl methyl ketone, polyethylene terephthalate], N‐containing [poly‐4‐vinylpyridine (P4VP), polyaniline oligomer (PAO)], and S‐containing [polyphenylene sulfide] substances are presented. Carbon Kα X‐ray emission spectra (XES) and X‐ray photoelectron spectra (XPS) are compared with our DFT calculations performed with the Amsterdam density functional (ADF) program. The combined analysis of valence XPS and carbon Kα XES allows us to determine the individual contributions from pσ‐ and pπ‐bonding molecular orbitals of the polymers. The ΔSCF calculations yield the accurate C1s core‐electron binding energies (CEBEs) for all carbon sites of the organic compound. We calculate all CEBEs of the model molecules using the ΔE _KS approach. Our simulated C1s photoelectron and C Kα emission spectra are in good agreement with our measurements. We also obtain WD (work function and the other energies) values for the polymers and PAO from the difference between calculated (gas‐phase) and measured (solid) CEBE values. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 162–172, 2007     

2,3,3′,6‐Tetra‐O‐acetyl‐4,1′,6′‐trichloro‐4,1′,4′,6′‐tetradeoxygalactosucrose

At 160 K, one of the Cl atoms in the furanoid moiety of 3‐O‐acetyl‐1,6‐di­chloro‐1,4,6‐tri­deoxy‐β‐d ‐fructo­furan­osyl 2,3,6‐tri‐O‐acetyl‐4‐chloro‐4‐deoxy‐α‐d ‐galacto­pyran­oside, C₂₀H₂₇­Cl₃O₁₁, is disordered over two orientations, which differ by a rotation of about 107° about the parent C—C bond. The conformation of the core of the mol­ecule is very similar to that of 3‐O‐acetyl‐1,4,6‐tri­chloro‐1,4,6‐tri­deoxy‐β‐d ‐tagato­furanos­yl 2,3,6‐tri‐O‐acetyl‐4‐chloro‐4‐deoxy‐α‐d ‐galacto­pyran­oside, particularly with regard to the conformation about the glycosidic linkage.     

Novel Synthesis of Some Imidazolyl‐, Benzoxazinyl‐, and Quinazolinyl‐2,4‐dioxothiazolidine Derivatives

2‐(2,4‐Dioxothiazolidin‐5‐yl)acetic acid 1 and its chloride derivative 2 were allowed to react with different aromatic amines such as o‐phenylenediamine, o‐aminothiophenol, p‐aminoacetophenone, and anthranilic acid to give the biologically active nuclei such as imidazoles, thiazoles, benzoxazines, and quinazolines incorporated with the thiazolidindione nucleus. The antimicrobial activity of five of the synthesized compounds was examined against one gram positive bacteria (Staphylococcus aureus), one gram negative bacteria (Escherichia coli), and two fungi (Aspergillus flavus and Candida albicans). Four compounds showed moderate antibacterial and antifungal activities.     

Interactions between temozolomide and guanine and its S and Se‐substituted analogues

Temozolomide was paired with guanine, 6‐selenoguanine, and 6‐thioguanine, as well as the SH tautomer of the latter. The potential energy surface of each heterodimer was searched for all minima, using Dispersion‐Corrected Density Functional Theory and MP2 methods. Among the dozens of minima, three categories were observed. Stacked geometries place the aromatic systems of the two molecules parallel to one another, while the two systems are roughly perpendicular to one another in a second category. Also found are coplanar structures held together by H‐bonds. Dispersion proves to be a dominating attractive force for the stacked structures, less so for perpendicular, and smallest for the coplanar dimers. Geometries and energetics are relatively insensitive to S and Se substitution, but tautomerization reverses relative stabilities of different geometries.     

Benign‐by‐Design Solventless Mechanochemical Synthesis of Three‐, Two‐, and One‐Dimensional Hybrid Perovskites

Organic–inorganic hybrid perovskites have attracted significant attention owing to their extraordinary optoelectronic properties with applications in the fields of solar energy, lighting, photodetectors, and lasers. The rational design of these hybrid materials is a key factor in the optimization of their performance in perovskite‐based devices. Herein, a mechanochemical approach is proposed as a highly efficient, simple, and reproducible method for the preparation of four types of hybrid perovskites, which were obtained in large amounts as polycrystalline powders with high purity and excellent optoelectronics properties. Two archetypal three‐dimensional (3D) perovskites (MAPbI₃ and FAPbI₃) were synthesized, together with a bidimensional (2D) perovskite (Gua₂PbI₄) and a “double‐chain” one‐dimensional (1D) perovskite (GuaPbI₃), whose structure was elucidated by X‐ray diffraction.     

Mechanistic Studies of Hoveyda–Grubbs Metathesis Catalysts Bearing S‐, Br‐, I‐, and N‐coordinating Naphthalene Ligands

Derivatives of the Hoveyda–Grubbs complex bearing S‐, Br‐, I‐, and N‐coordinating naphthalene ligands were synthesized and characterized with NMR and X‐ray studies. Depending on the arrangement of the coordinating sites on the naphthalene core, the isomeric catalysts differ in activity in model metathesis reactions. In particular, complexes with the Ru?CH bond adjacent to the second aromatic ring of the ligand suffer from difficulties experienced on their preparation and initiation. The behavior most probably derives from steric hindrance around the double bond and repulsive intraligand interactions, which result in abnormal chemical shifts of benzylidene protons observed with ¹H NMR. Furthermore EXSY studies revealed that the halogen‐chelated ruthenium complexes display an equilibrium, in which major cis‐Cl₂ structures are accompanied with small amounts of isomeric forms. In general, contents of the minor forms, measured at 80 °C, correlate with the observed activity trends of the catalysts, although some exceptions complicate the mechanistic picture. We assume that for the family of halogen‐chelated metathesis catalysts the initiation mechanism starts with the cis‐Cl₂?trans‐Cl₂ isomerization, although further steps may become rate‐limiting for selected systems.     

Synthesis and Antimicrobial Evaluations of Some Novel Mono‐, Bis‐, and Tris‐Nitro‐1,2,4‐Triazines

Substituted‐1,2,4‐triazines were conveniently synthesized in one pot by the cyclization of arylnitroformaldehyde hydrazone derivatives 1 and 5 with different primary amines in ~37% formaldehyde solution. The synthesized compounds were arranged into novel mono‐, bis‐, and tris‐nitro‐1,2,4‐triazine derivatives 2 , 3 , 4 , 6 , and 7 . The antibacterial and antifungal activity of the synthesized compounds were screened against bacterial strains Escherichia coli (as Gram − ve) and Staphylococcus aureus (as Gram + ve), and fungal strains Aspergillus flavus and Candida albicans . All the synthesized compounds exhibit various patterns of inhibitory activity on the two pathogenic bacterial strains. However, the same compounds showed no activity against the tested fungal strains.