Mass spectrometric studies of cis‐ and trans‐1a,3‐disubstituted‐1,1‐dichloro‐4‐formyl‐1a, 2,3,4‐tetrahydro‐lH‐azirino[1,2‐a]1,5]benzodiazepines

The mass spectrometric behaviour of four cis‐ and trans‐1a,3‐disubstituted‐1,1‐dichloro‐4‐formyl‐1a,2,3,4‐tetrahydro‐1H‐azirino [1, 2‐a][1,5]benzodiazepines has been studied with the aid of mass‐analysed ion kinetic energy spectrometry and exact mass measurements under electron impact ionization. All compounds show a tendency to eliminate a chlorine atom from the aziridine ring, and then eliminate a neutral propene or styrene from the diazepine ring to yield azirino [1,2‐b][1,3] benzimidazole ions. These azirino [1,2‐a][1,5]‐benzodiazepimes can also eliminate HCl, or Cl plus HCl simultaneously to undergo a ring enlargement rearrangement to yield 1,6‐benzodiazocine ions, which further lose small molecular fragments, propyne or phenylacetylene, with rearrangement to give quinoxaline ions.     

Synthesis of [1,2‐a] benzimidazolo‐1,3,5‐triazin‐2‐thione, [1,2‐a] benzimidazolo‐1,3,5‐thiadiazin‐2‐thione, [1,2‐a] benzimidazolo‐1,3,5‐triazin‐2‐amine,and [1,2‐a] benzimidazol‐2‐yl amidrazone

N‐benzimidazol‐2‐yl imidate type 1 reacts with thiourea, carbon disulfide, cyanamide, and hydrazide to give, respectively, [1,2‐a] benzimidazolo‐1,3,5‐triazin‐2‐thione 2 , [1,2‐a] benzimidazolo‐1,3,5‐thiadiazin‐2‐thione 3 , [1,2‐a] benzimidazolo‐1,3,5‐triazin‐2‐amine 4 , and [1,2‐a] benzimidazol‐2‐yl amidrazone 5 with good yields. Structures elucidation of all newly synthesized heterocyclic compounds was based on the data of IR, ¹H NMR, ¹³C NMR, elemental analysis, and MS of some products. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:279–283, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20618     

11‐Hydro­xy‐3,3‐di­methyl‐7,12‐dioxo‐3,4,6,6a,7,12,12a,12b‐octa­hydro­benz­[a]­anthracen‐1‐yl acetate

The Diels–Alder reaction between 5‐hydroxy‐1,4‐naphtho­quinone and 5,5‐di­methyl‐3‐vinyl‐1,2‐cyclo­hexa­dienyl acetate by endo addition gives the title compound, C₂₂H₂₂O₅, in 68% yield. This racemic diastereoisomer has the opposite regiochemistry to ochromycinone analogues produced previously and may allow access to a new type of anticancer‐active saqua­yamycin analogue.     

Toughening of a propylene‐b‐(ethylene‐co‐propylene) copolymer by a plastomer

Several blends, covering the entire range of compositions, of a metallocenic ethylene‐1‐octene copolymer (CEO) with a multiphasic block copolymer, propylene‐b‐(ethylene‐co‐propylene) (CPE) [composed of semicrystalline isotactic polypropylene (iPP) and amorphous ethylene‐co‐propylene segments], have been prepared and analyzed by differential scanning calorimetry, X‐ray diffraction, optical microscopy, stress‐strain and microhardness measurements, and dynamic mechanical thermal analysis. The results show that for high CEO contents, the crystallization of the iPP component is inhibited and slowed down in such a way that it crystallizes at much lower temperatures, simultaneously with the crystallization of the CEO crystals. The mechanical results suggest very clearly the toughening effect of CEO as its content increases in the blends, although it is accompanied by a decrease in stiffness. The analysis of the viscoelastic relaxations displays, first, the glass transition of the amorphous blocks of CPE appearing at around 223 K, which is responsible for the initial toughening of the plain CPE copolymer in relation to iPP homopolymer. Moreover, the additional toughening due to the addition of CEO in the blends is explained by the presence of the β relaxation of CEO that appears at about 223 K. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1869–1880, 2002     

Solvent‐Vapor‐Induced Reversible Single‐Crystal‐to‐Single‐Crystal Transformation of a Triphosphaazatriangulene‐Based Metal–Organic Framework

A triphosphaazatriangulene (H₃L) was synthesized through an intramolecular triple phospha‐Friedel–Crafts reaction. The H₃L triangulene contains three phosphinate groups and an extended π‐conjugated framework, which enables the stimuli‐responsive reversible transformation of [Cu(HL)(DMSO)?(MeOH)]_n, a 3D‐MOF that exhibits reversible sorption characteristics, into (H₃L?0.5 [Cu₂(OH)₄?6 H₂O] ?4 H₂O), a 1D‐columnar assembled proton‐conducting material. The hydrophilic nature of the latter resulted in a proton conductivity of 5.5×10^?3 S cm^?1 at 95 % relative humidity and 60 °C.     

Proton‐Coupled Self‐Assembly of a Porphyrin‐Naphthalenediimide Dyad

The construction of an n–p heterojunction through the self‐assembly of a dyad based on tetraphenylporphyrin (TPP) and 1,4,5,8‐naphthalenedimide (NDI) ( 1 ) is described. Proton transfer from the lysine head group of 1 to the porphyrin ring occurs concomitantly with self‐assembly into 1D nanorods in CHCl₃. TEM and AFM studies showed that the nanorods are formed by the lateral and vertical fusion of multilameller vesicles into networks and hollow ribbons, respectively. These intermediate structures transitioned to nanorods over the course of 4–6 days. Time‐resolved spectroscopy revealed that photoinduced charge separation occurs with rate constants that depend on the nature of the aggregation.     

Construction of a High‐Mannose‐Type Glycan Library by a Renewed Top‐Down Chemo‐Enzymatic Approach

A comprehensive method for the construction of a high‐mannose‐type glycan library by systematic chemo‐enzymatic trimming of a single Man9‐based precursor was developed. It consists of the chemical synthesis of a non‐natural tridecasaccharide precursor, the orthogonal demasking of the non‐reducing ends, and trimming by glycosidases, which enabled a comprehensive synthesis of high‐mannose‐type glycans in their mono‐ or non‐glucosylated forms. It employed glucose, isopropylidene, and N‐acetylglucosamine groups for blocking the A‐, B‐, and C‐arms, respectively. After systematic trimming of the precursor, thirty‐seven high‐mannose‐type glycans were obtained. The power of the methodology was demonstrated by the enzymatic activity of human recombinant N‐acetylglucosaminyltransferase‐I toward M7–M3 glycans, clarifying the substrate specificity in the context of high‐mannose‐type glycans.     

Grain‐Boundary‐Free Super‐Proton Conduction of a Solution‐Processed Prussian‐Blue Nanoparticle Film

A porous crystal family has been explored as alternatives of Nafion films exhibiting super‐proton conductivities of ≥10⁻² S cm⁻¹. Here, the proton‐conduction natures of a solution‐processed film of nanoparticles (NPs) have been studied and compared to those of a Nafion film. A mono‐particle film of Prussian‐blue NPs is spontaneously formed on a self‐assembled monolayer substrate by a one‐step solution process. A low‐temperature heating process of the densely packed, pinhole‐free mono‐particle NP film enables a maximum 10⁵‐fold enhancement of proton conductivity, reaching ca. 10⁻¹ S cm⁻¹. The apparent highest conductivity, compared to previously reported data of the porous crystal family, remains constant against humidity changes by an improved water‐retention ability of the film. In our proposed mechanism, the high‐performing solution‐processed NP film suggests that heating leads to the self‐restoration of hydrogen‐bonding networks throughout their innumerable grain boundaries.     

3a‐Phenyl‐2,3,3a,4‐tetrahydro‐1H‐benzo[d]pyrrolo[1,2‐a]imidazol‐1‐one,a potential plant‐growth regulator

Molecules of the title compound, C₁₆H₁₄N₂O, a potential plant‐growth regulator, are linked into chains by intermolecular C=O...H—N hydrogen bonds. These chains are weakly interconnected by π–π stacking interactions to form a three‐dimensional framework. A comparison of the geometric parameters of the title molecule and several related benzimidazoles and pyrrolidones is presented.<!?tpb=22pt>     

An efficient synthesis of a class of novel N‐Alkyl‐N‐aryl‐4‐hydroxy‐1‐methyl‐2‐oxo‐1,2‐dihydro‐3‐quinolinecarbothioamides

The novel title compounds have been prepared in high yield by an optimized amide coupling followed by a Dieckmann cyclization. Additionally, this new route is amenable to preparative scale synthesis.     

Synthesis of 1,3,3a,5‐tetraaryl‐3a,4,5,6‐tetrahydro‐3H‐1,2,4‐triazolo[4,3‐a] [1,5]benzodiazepines

A series of 3a,5‐diaryl‐1,3‐diphenyl‐3a,4,5,6‐tetrahydro‐3H‐1,2,4‐triazolo[4,3‐a][1,5]benzo‐diazepines was synthesized by the cycloaddition reactions of 2,4‐diaryl‐2,3‐dihydro‐1H‐1,5‐benzo‐diazepines and N‐phenylbenzonitrileimine generated from N‐phenylbenzenecarbohydrazonic chloride in the presence of triethylamine in anhydrous tetrahydrofuran. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:557–559, 2001     

Hydrogen‐Bond‐Guided Self‐Assembly of Nucleotides on a Receptor‐Array Surface

The hydrogen‐bond‐guided self‐assembly of 5′‐ribonucleotides bearing adenine(A), cytosine (C), uracil (U), or guanine (G) bases from aqueous solution on a lipid‐like surface decorated with synthetic bis(Zn^II–cyclen) (cyclen=1,4,7,10‐tetraazacyclodododecane) metal–complex receptor sites is described. The process was studied by using surface plasmon resonance spectroscopy. The data show that the mechanism of nucleotide binding to the 2D template is influenced by the chemistry of the bases and the pH value of the solution. In a neutral solution of pH 7.5, the process is cooperative and selective with respect to Watson–Crick pairs (A–U and C–G), which form stable double planes in accordance with the Chargaff rule. In a more acidic solution at pH 6.0, the interactions between complementary partners become non‐cooperative and the surface also stabilizes mismatched and wobble pairs due to the pH‐induced changes in the receptor coordination state. The results suggest that hydrogen bonding plays a key role in the self‐assembly of complementary nucleotides at the lipid‐like interface, and the cooperative character of the process stems from the ideal matching of the orientation and chemistry of all the interacting components with respect to each other in neutral solution.     

Synthesis of a Stable N‐Hetero‐RhI‐Metallacyclic Silanone

A novel N‐hetero‐Rh^I‐metallacyclic silanone 2 has been synthesized. The silanone 2 , showing an extremely large dimerization energy (ΔG=+86.2 kcal mol^?1), displays considerable stability and persists in solution up to 60 °C. Above 120 °C, an intramolecular C_sp3?H insertion occurs slowly over a period of two weeks leading to the bicyclic silanol 5 . The exceptional stability of 2 , related to the unusual electronic and steric effects of Rh^I‐substituent, should allow for a more profound study and understanding of these new species. Furthermore, the metallacyclic silanone 2 presents two reactive centers (Si=O and Rh), which can be involved depending upon the nature of reagents. Of particular interest, the reaction with H₂ starts with the hydrogenation of Rh^I center leading to the corresponding Rh^III‐dihydride complex 7 and it undergoes a cis/trans‐isomerization via a particular mechanism, demonstrating that addition‐elimination processes can also happen for silanones just like for their carbon analogues!     

Synthesis of N‐methyl‐4‐pyridyl‐1,2,3,4‐tetrahydroisoquinolines via a pictet‐spengler cyclisation

The synthesis of N‐methyl‐4‐pyridyl‐1,2,3,4‐tetrahydroisoquinolines (6a,b,c) was achieved via a Pictet‐Spengler cyclization of an activated amino group derivatized in a carbamate form. The obtained compounds have been designed as potential serotonin analogs.