聚合物的表面光接枝改性

本文总结了利用紫外光接枝改性聚合物表面的研究进展，对接枝方法，接枝证明。接枝结构、实验条件对接枝的影响以及其广泛的应用几个方面进行了介绍。     

聚合物表面的环境响应性

文中讨论了聚合物环境响应的多样性，此响应性可借表面改性和形成多组分聚合物以结构参数而有效地控制。响应性与生物医学材料的血液相容性及既适合极性又可用于非极性基材的粘合剂的智能特性相关。     

端基功能化聚合物的表面性能

综述了端基功能化聚合物表面结构与性能的最新研究进展.聚合物端基功能化是实现聚合物表面改性的一种有效技术.通过端基功能化可以精确控制聚合物表面功能基团的种类和数量,从而影响聚合物表面的化学结构与性能.重点论述了功能化端基在聚合物表面的离析现象和产生这一现象的原因,以及功能化端基对聚合物表面分子运动能力的影响.本文还介绍了近年来用于研究端基功能化聚合物表面的表征新技术,如SFG、NR、SSIMS等.对端基功能化聚合物表面的环境响应性也进行了阐述.指出了利用不同功能化端基可以有效地控制聚合物表面的亲疏水性.并对端基功能化聚合物的应用进行了展望.     

高分子的表面化学组成与生物相容性

生物相容性是高分子材料在临床上用作医用装置的基本要求，改变高分子材料的表面化学组成是提高其生物相容性的重要途径。综述了构建表面化学组成改性高分子材料生物相容性的最新研究进展，并对改善高分子材料生物相容性的研究方法提出了一些看法。     

Recent Developments in the Surface Modification of Polymers

Summary. Selected trends and scientific achievements in the surface modification of polymers are reported. In this context, both UV-light triggered free radical polymerization-based techniques relevant to industrial processes and ring-opening metathesis polymerization-based chemistry, relevant for the manufacture of specialty materials, are addressed.     

Spatial and Surface Design of Porous Coordination Polymers

A significant challenge in the development of porous coordination polymers (PCP's), beyond control of pore size, is control of the shape and chemical nature of the pores. This short review presents some compounds that illustrate these features and general approaches to their preparation.     

Polymers as Hydrophobic Adsorbent Surface for Some Surfactants

Polyvinyl alcohol (PVA) and polyacrilic acid (PAA) were used as hydrophobic adsorbent surfaces at 25°C for two nonionic surfactants, namely, tetradecyl polyoxyethylenated monolaurate [La(EO)₁₄] and tetradecyl polyoxyethylenated monooleate [Ol(EO)₁₄], and two anionic surfactants, namely, sodium oleic sulfonate [OlSO₃Na] and sodium dodecyl benzene sulfonate [SDBS]. Surface tension measurements were performed to determine the critical micelle concentration (CMC) and the adsorption isotherms of the tested surfactants. All the tested surfactants display L-shape isotherms except that of OlSO₃Na onto PVA. No adsorption behavior has been shown for the anionic SDBS onto both PVA and PAA. The adsorption data show higher adsorption affinity for all the tested nonionic surfactants onto PAA than onto PVA while the investigated anionic surfactant OlSO₃Na possesses close values of Γ_max. The study reveals that the nature of the polymer surface as adsorbent besides the molecular structure of the surfactant defined the types and mechanisms of adsorption.     

含氟丙烯酸酯聚合物乳胶膜表面性质

采用XPS和界面张力仪分别测定了含氟丙烯酸酯聚合物乳胶膜表面的组成及水在其表面的动态接触角, 并用状态逼近方程模型计算了含氟聚合物乳胶膜的表面张力, 考察了温度对乳胶膜润湿性的影响. 结果表明, 含氟聚合物乳胶膜表层较深处的F 1s信号强度比近表面要弱, 乳胶膜表面张力随表面氟原子浓度增加在一定程度上呈现线性下降；含氟侧链(Rf)较长(碳原子数n＞6)的含氟聚合物, 其表面张力随Rf单元含量增加而下降的趋势显著高于Rf较短(n≤6)的含氟聚合物, 而水在含氟聚合物乳胶膜表面上的后退接触角θr随n增大出现急剧上升, n≥10 时, θr值几乎恒定不再随n增大而改变. 此外, 参与共聚的非氟丙烯酸酯酯基碳链较短时, 水在共聚物乳胶膜表面的θr随氟单元含量增加而增加的趋势更显著；温度超过40 ℃后, 水对聚合物乳胶膜的润湿性随温度上升略有改善.     

Surface Interactions of Radicals During Plasma Processing of Polymers

Surface interactions of radical species were investigated using the imaging of radicals interacting with surfaces (IRIS) technique during plasma surface modification of polymers. Three plasma systems were investigated by spatially probing the laser induced fluorescence of individual radical species and determining their surface scattering coefficients, S. The behavior of CF₂ moieties on polymer surfaces was studied using the fluorocarbon plasmas C₂F₆ and hexafluoropropylene oxide (HFPO). Three types of surface interactions were observed, surface generation of CF₂ (S > 1), surface loss of CF₂ (S < 1), and unit scattering (S = 1). Surface loss of CF₂ was seen in HFPO plasmas, while CF₂ was generated in C₂F₆ systems. The differences between these systems is believed to be the result of different overall surface interactions, specifically film deposition in the HFPO system and etching in the C₂F₆ system. Using NH₃ plasmas, the surface interactions of NH₂ radicals with polymers was also investigated. Here, NH₂ is generated at the surface of polyethylene and polytetrafluoroethylene substrates, but is consumed on polyimide substrates. Ion effects were also investigated by placing a grounded mesh in the path of the molecular beam to remove charged species.     

Functional Zwitterionic Polymers on Surface: Structures and Applications

Zwitterionic polymers are important in a wide range of industrial, biological and medical fields. Their chemical structures include an equal amount of anion and cation groups, and such structures give rise to many unique functionalities, such as temperature response, anti‐polyelectrolyte effect, and strong hydration properties. In this review, we focus on the structures and applications of functional zwitterionic polymers on surfaces. We review three areas of applications according to the architecture of the polymeric systems: surface coating, complex solutions, and hydrogel. We review the simulation and theory work and highlight some outlooks for further development.     

Diradical Organic One-Dimensional Polymers Synthesized on a Metallic Surface

We report on the synthesis and characterization of atomically precise one-dimensional diradical peripentacene polymers on a Au(111) surface. By means of high-resolution scanning probe microscopy complemented by theoretical simulations, we provide evidence of their magnetic properties, which arise from the presence of two unpaired spins at their termini. Additionally, we probe a transition of their magnetic properties related to the length of the polymer. Peripentacene dimers exhibit an antiferromagnetic (S=0) singlet ground state. They are characterized by singlet–triplet spin-flip inelastic excitations with an effective exchange coupling (J_eff) of 2.5 meV, whereas trimers and longer peripentacene polymers reveal a paramagnetic nature and feature Kondo fingerprints at each terminus due to the unpaired spin. Our work provides access to the precise fabrication of polymers featuring diradical character which are potentially useful in carbon-based optoelectronics and spintronics.     

量子点的聚合物表面修饰及其应用

量子点作为新型纳米发光材料备受关注,但由于光学稳定性和生物相容性的问题而在实际应用上受限。聚合物对量子点的修饰能够提供量子点合成的有效支撑基质,而且还可以改善量子点的稳定性和单分散性,进而可以拓展量子点应用于化学、物理以及生物学领域。基于聚合物修饰量子点的优势,本文简述了聚合物表面修饰量子点的方法、合成路线、步骤、特点以及发展现状。其中,双亲分子涂敷的量子点可以改善量子点的水溶性;多基配体包裹的量子点更具有稳定性和功能性;末端功能化聚合物表面修饰的量子点则可以合成更为先进功能的材料;胶封树枝状定域量子点具有单分散和优越发光特性。同时,还综述了各种表面修饰方法的最新研究进展,存在问题以及应用发展趋势。     

Energy Characteristics of the Surface of Modified Phosphorus-Containing Epoxy Polymers

The Fowkes and van Oss-Good approaches were used for assessing the energy characteristics of the surface of the epoxy-amine systems modified with triglycidyl phosphate. Variation of these characteristics with the modifier content and polymer curing conditions was studied.     

加替沙星磁性表面分子印迹材料的制备及其识别特性的研究

以γ-(甲基丙烯酰氧)丙基三甲氧基硅烷( MPS)修饰的磁性二氧化硅( Fe3 O4@SuO2)为载体,加替沙星( GTFX)为模板分子,采用表面印迹法制备磁性表面分子印迹聚合物( M-MIPs)。用透射电镜( TEM)及磁化强度分析( VSM)对此聚合物进行了表征。吸附实验和Scatchard分析结果表明,M-MIPs中存在特异性和非特异性两类结合位点。 M-MIPs 和磁性非印迹聚合物( M-NIPs)对 GTFX 的最大吸附容量分别为35.1和23.13 mg/g。 M-MIPs对于环丙沙星(CPFX)、诺氟沙星(NFLX)、三聚氰胺(MEL)以及四环素(TC)的选择性系数k分别为2.43,5.18,6.61和12.99;M-MIPs相对M-NIPs的相对选择性系数k＇分别为2.09,1.95,3.15和2.43,表明M-MIPs对GTFX具有良好的特异性识别能力。将此表面印迹材料用于牛奶中GTFX的分离富集,采用高效液相色谱法检测,回收率大于91.5%。     

Tuning the Surface Properties of Oxygen-Rich and Nitrogen-Rich Plasma Polymers: Functional Groups and Surface Charge

Controlling the concentration and nature of functional groups in plasma polymer films by adjusting the flow ratio of constituent precursor gases can be exploited to tune the surface charge of the resulting coating. Plasma polymer films containing various concentrations of nitrogen and oxygen functional groups were deposited in a low-pressure capacitively-coupled glow discharge reactor by plasma polymerization of binary gas mixtures of a hydrocarbon (ethylene or butadiene) and a heteroatom source gas (ammonia and/or carbon dioxide). Increasing the flow ratio of heteroatom to hydrocarbon gases increased the concentration of bonded nitrogen or oxygen, including that of primary amine or carboxylic groups as determined by X-ray photoelectron spectroscopy and chemical derivatization procedures. The zeta potential of samples was measured using an electro-kinetic analyser in a diluted sodium chloride solution. The deposition parameters controlled the composition of the coatings, allowing to tune the surface charge to either positive (ammonia based films)—or negatively (carbon dioxide base films) values at physiological pH.     

Plasma Surface Modification of Biomedical Polymers: Influence on Cell-Material Interaction

Polymers are commonly used in industry because of their excellent bulk properties, such as strength and good resistance to chemicals. Their surface properties are for most application inadequate due to their low surface energy. A surface modification is often needed, and plasma surface modification is used with success the past decades. In the past few years, also plasma surface modification for biomedical polymers has been investigated. For biomedical polymers, the surface properties need to be altered to promote a good cell adhesion, growth and proliferation and to make them suitable for implants and tissue engineering scaffolds. This review gives an overview of the use of plasma surface modification of biomedical polymers and the influence on cell-material interactions. First, an introduction on cell-material interaction and on antibacterial and antifouling surfaces will be given. Also, different plasma modifying techniques used for polymer surface modification will be discussed. Then, an overview of literature on plasma surface modification of biopolymers and the resulting influence on cell-material interaction will be given. After an overview of plasma treatment for improved cell-material interaction, plasma polymerization and plasma grafting techniques will be discussed. Some more specialized applications will be also presented: the treatment of 3D scaffolds for tissue engineering and the spatial control of cell adhesion. Antibacterial and antifouling properties, obtained by plasma techniques, will be discussed. An overview of research dealing with antibacterial surfaces created by plasma techniques will be given, antifouling surfaces will be discussed, and how blood compatibility can be improved by preventing protein adhesion.     

Atmospheric Pressure Plasma Surface Treatment of Polymers and Influence on Cell Cultivation

Atmospheric plasma treatment is an effective and economical surface treatment technique. The main advantage of this technique is that the bulk properties of the material remain unchanged while the surface properties and biocompatibility are enhanced. Polymers are used in many biomedical applications; such as implants, because of their variable bulk properties. On the other hand, their surface properties are inadequate which demands certain surface treatments including atmospheric pressure plasma treatment. In biomedical applications, surface treatment is important to promote good cell adhesion, proliferation, and growth. This article aim is to give an overview of different atmospheric pressure plasma treatments of polymer surface, and their influence on cell-material interaction with different cell lines.     

Tunable Surface Area,Porosity, and Function in Conjugated Microporous Polymers

Simple inorganic salts are used to tune N‐containing conjugated microporous polymers (CMPs) synthesized by Buchwald–Hartwig (BH) cross‐coupling reactions. Poly(triphenylamine), PTPA, initially shows a broad distribution of micropores, mesopores, and macropores. However, the addition of inorganic salts affects all porous network properties significantly: the pore size distribution is narrowed to the microporous range only, mimicking COFs and MOFs; the BET surface area is radically improved from 58 m² g^?1 to 1152 m² g^?1; and variations of the anion and cation sizes are used to fine‐tune the surface area of PTPA, with the surface area showing a gradual decrease with an increase in the ionic radius of salts. The effect of the salt on the physical properties of the polymer is attributed to adjusting and optimizing the Hansen solubility parameters (HSPs) of solvents for the growing polymer, and named the Beijing–Xi'an Jiaotong (BXJ) method.     

Surface Chemistry of Polymers the Influence of Thermal and Chemical Treatments on the Surface Properties of Polyvinylchloride

The influence of thermal and chemical treatments (tetrahydrofuran and dioxane) on the adsorption properties of polyvinylchloride is investigated by gas chromatographic methods. It is shown, that heating to the glass-transition temperature has an erasing effect. Methanol was used as the main molecular probe.     

On‐Surface Synthesis of Ethynylene‐Bridged Anthracene Polymers

Engineering low‐band‐gap π‐conjugated polymers is a growing area in basic and applied research. The main synthetic challenge lies in the solubility of the starting materials, which precludes advancements in the field. Here, we report an on‐surface synthesis protocol to overcome such difficulties and produce poly(p‐anthracene ethynylene) molecular wires on Au(111). To this aim, a quinoid anthracene precursor with =CBr₂ moieties is deposited and annealed to 400 K, resulting in anthracene‐based polymers. High‐resolution nc‐AFM measurements confirm the nature of the ethynylene‐bridge bond between the anthracene moieties. Theoretical simulations illustrate the mechanism of the chemical reaction, highlighting three major steps: dehalogenation, diffusion of surface‐stabilized carbenes, and homocoupling, which enables the formation of an ethynylene bridge. Our results introduce a novel chemical protocol to design π‐conjugated polymers based on oligoacene precursors and pave new avenues for advancing the emerging field of on‐surface synthesis.