An LC method for monitoring medium-chain fatty acid permeation through CaCo-2 cell monolayers

A simple method was developed for monitoring the permeation of medium-chain fatty acids of C8 (octanoic acid) and C10 (decanoic acid) through CaCo-2 cell monolayers by high-performance liquid chromatography with electrochemical detection (HPLC-ECD). The detection was made based on the electrochemical reduction prepeak of quinone caused by acids, requiring the fabrication of a two-channel HPLC-ECD system. In one channel, acetonitrile–water (7:3, v/v) was used as a mobile phase to separate acids by a C30 column. In the other channel, acetonitrile–water (7:3, v/v) containing 6 mmol/L 3,5-di-t-butyl-1,2-benzoquinone and 20 mmol/L LiClO₄ was used as a quinone solution to detect acids by an electrochemical cell with a glassy carbon working electrode. In this HPLC-ECD system, eluted acids were mixed with the quinone solution in a post column fashion to obtain current signals caused by acids. The peak area was found to be linearly related to the acid amount ranging from 25 to 1,000 pmol (r > 0.992). The detection limits of octanoic acid and decanoic acid were 7.5 and 8.8 pmol, respectively. Octanoic acid and decanoic acid spiked into cell culture media samples were extracted with acetonitrile and their recoveries were more than 89.5% with an RSD of less than 8.2%. This method was applied to the permeation experiment of octanoic acid and decanoic acid with CaCo-2 cell monolayers formed on the Transwell? system. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. This work was partly presented at The Physical Pharma Forum 2008 on March 24, 2008 in Tokyo, Japan.     

Predicting Caco-2 cell permeation coefficients of organic molecules using membrane-interaction QSAR analysis

A methodology termed membrane-interaction QSAR (MI-QSAR) analysis has been developed in order to predict the behavior of organic compounds interacting with the phospholipid-rich regions of biological membranes. One important application of MI-QSAR analysis is to estimate ADME properties including the transport of organic solutes through biological membranes as a computational approach to forecasting drug intestinal absorption. A training set of 30 structurally diverse drugs, whose permeability coefficients across the cellular membranes of Caco-2 cells were measured, was used to construct significant MI-QSAR models of Caco-2 cell permeation. Cellular permeation is found to depend primarily upon aqueous solvation free energy (solubility) of the drug, the extent of drug interaction with a model phospholipid (DMPC) monolayer, and the conformational flexibility of the solute within the model membrane. A test set of eight drugs was used to evaluate the predictivity of the MI-QSAR models. The permeation coefficients of the test set compounds were predicted with the same accuracy as the compounds of the training set.     

Expanded capsules with reversibly added spacers

Glycolurils insert as spacer elements in a capsule to create a new space with enhanced dimensions.     

Determination of in vitro permeability of drug candidates through a caco-2 cell monolayer by liquid chromatography/tandem mass spectrometry

Studying the permeability of compounds across a Caco-2 cell monolayer is an established in vitro model to screen for oral absorption and to evaluate the mechanism of transport. This assay can also be used to evaluate compounds as potential P-glycoprotein substrates and/or inhibitors. The traditional methods of sample analysis (high-performance liquid chromatography (HPLC) with a UV or fluorescence detector) limit the throughput and sensitivity of this assay. Data are presented here describing the use of liquid chromatography/tandem mass spectrometry (LC/MS/MS) for the analysis of samples derived from the Caco-2 cell studies. During the analysis an automatic switching valve was used to divert the flow from the HPLC column to waste for the first minute, preventing the early eluting salts from entering and contaminating the LC/MS interface. This approach allows the rapid and accurate determination of drug transport across the Caco-2 cell monolayer. The high sensitivity and specificity of LC/MS/MS make this technique an ideal candidate for the low concentration and high throughput routine analysis of Caco-2 cell solutions, especially if multiple compounds are administered and analyzed simultaneously. Thus, the use of LC/MS/MS will increase the value of the Caco-2 cell assay as an in vitro screening tool.     

Degenerate molecular shuttles with flexible and rigid spacers

The preparation and dynamic behavior of degenerate rotaxane molecular shuttles are described in which a benzylic amide macrocycle moves back and forth between two naphthalimide-glycine units along a diphenylethyne spacer or an aliphatic spacer consisting of a C(9), C(12), or C(26) alkyl chain. Subtle differences in the (1)H NMR spectra of the rotaxanes can be related to the presence of conformers in which the macrocycle interacts simultaneously with both glycines, especially in the case of the C(9) spacer. The kinetic data of the shuttling behavior in the C(26) rotaxane were obtained from dynamic NMR spectroscopy. The Eyring activation parameters were found to be ΔH(?) = 10 ± 1 kcal mol(-1), ΔS(?) = -6.5 ± 2.0 cal mol(-1) K(-1), ΔG(?)(298) = 11.9 ± 0.2 kcal mol(-1). For the systems with the shorter spacers, the shuttling rates were higher. Also in the diphenylethyne, rotaxane shuttling is rapid on the NMR time scale, indicating that the rigid unit does not impose a large barrier to the translocation of the macrocycle.     

Acid-sensitive PEGylated cabazitaxel prodrugs for antitumor therapy

Although the antitumor drug cabazitaxel shows great therapeutic potential, its high toxicity and poor water solubility limit its utility. However, the use of stimuli-responsive prodrugs is a promising strategy for overcoming these limitations. Herein, we report the synthesis of two highly water soluble, acid-sensitive PEGylated acyclic-ketal-linked cabazitaxel prodrugs (PKCs) with improved antitumor efficacy. In an acidic tumor microenvironment, the PKCs hydrolyzed rapidly to release the native drug, whereas they were stable in the normal physiological environment. Compared with cabazitaxel injection, the PKCs had much higher maximum tolerated doses; and in an MDA-MB-231 subcutaneous xenograft nude mouse model, the PKCs showed better antitumor efficacy and safety than cabazitaxel injection. The prodrug strategy reported herein could be useful for the development of other water soluble, acid-sensitive prodrugs with improved efficacy.     

Synthesis and biotesting of new carrier prodrugs of 2-methoxyestradiol

1. Download : Download high-res image (94KB)
2. Download : Download full-size image

     

Fabrication of multisegmented magnetic wires with micron-length copper spacers

Segmented magnetic nanowires have a distinctive magnetic signature which can be exploited in magnetic biosensors. We report on the fabrication of magnetic segmented nanowires with copper spacers a few microns long. The key to avoid dissolution of the magnetic segment by an electroless reaction with the Cu bath is to include an interlayer, which protects the magnetic segments from dissolution with concentrated Cu^2 + electrolytes. Ni alloyed with Co makes it magnetically soft and for a Co₈₀Ni₂₀ composition, the specific magnetization is reduced by only 15%, compared to pure Co.     

Potent divalent inhibitors with rigid glucose click spacers for Pseudomonas aeruginosa lectin LecA

The synthesis of a new rigid spacer based on carbohydrate-triazole repeating units and their incorporation into divalent systems is described. Inhibition studies showed that a well-matched system with a rigid spacer with flexible ends leads to the most potent inhibition of Pseudomonas aeruginosa lectin LecA.     

The polyurethane membranes with temperature sensitivity for water vapor permeation

The size and shape of free-volume holes available in membrane materials control the rate of gas diffusion and its permeability. Based on this principle, two segmented thermo-sensitive polyurethane (TSPU) membranes with functional gates, i.e. the ability to sense and respond to external thermo-stimuli, were synthesized and used for water vapor controllable permeation. Differential scanning calorimetry (DSC), positron annihilation lifetimes (PAL), water swelling and water vapor permeability (WVP) were used to evaluate how the structure of the polyurethane (PU) and the temperature influence the free-volume holes size and the water vapor permeability (WVP) of the PU membranes. DSC study reveals that TSPU with a glass transition or a crystalline transition reversible phase shows an obvious phase-separated structure and a phase transition temperature (defined as switch temperature, T_s). PAL study indicates that the free-volume holes size of TSPU is closely related to the T_s. When the temperature is higher than the T_s, the ortho-positronium (o-Ps) lifetime (τ₃) and the average radius (R) of free-volume holes of TSPU membrane increase dramatically. As a result, the WVP of TSPU membrane shows a dramatic increase. Additionally, the water swelling and the WVP of TSPU membrane are found to depend on the inner structure of the polymer, and they also give different responses to temperature variation. When the temperature is higher than the T_s, there is a significant increase of WVP from 3.80 kg/m² day to 7.63 kg/m² day for TSPU(a) and from 4.30 kg/m² day to 8.58 kg/m² day for TSPU(b), respectively. Phase transition accompanying significant changes in free-volume holes size and WVP can be used to develop “smart membranes” with functional gates and controllable gas permeation.     

Polymerization of bisdithiafulvenes with conjugated spacers using oxidative dimerization

Novel vinylogous tetrathiafulvalene (TTF) containing polymers ( 13 and 14 ) were prepared by the oxidative dimerization polymerization of bisdithiafulvenes. The obtained polymers were soluble in common organic solvents such as CHCl₃. The structures of the polymers were confirmed by ¹H NMR and cyclic voltammetry analysis. The number‐average molecular weights of 13 and 14 were estimated from gel permeation chromatography to be 3600 and 3800, respectively. Through the introduction of phenylene or phenylene–vinylene spacers, distortion between dialkoxybenzene and vinylogous TTF units was effectively prevented according to ultraviolet–visible analysis. The polymers exhibited a strong electron‐donating property investigated by cyclic voltammetry analysis. Chemical doping by CF₃SO₃H gave doped polymers having a cationic radical and a dication of a vinylogous TTF unit. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2027–2033, 2006     

High-throughput caco-2 cell permeability screening by cassette dosing and sample pooling approaches using direct injection/on-line guard cartridge extraction/tandem mass spectrometry

A method for high-throughput Caco-2 permeability screening of drug candidates has been developed using thirteen generic drugs as test compounds. The high throughput was achieved by either a sample pooling or a cassette dosing approach, along with the use of a rapid, simple and sensitive direct injection/on-line guard cartridge extraction/tandem mass spectrometric assay that was also developed in this study. It was of concern that possible drug-drug interactions (e.g., inhibition of P-glycoprotein-mediated transport of a drug by another, and/or competition of the drugs for transport pathways), when the cassette dosing regimen was implemented, may give rise to inconsistent results compared with those attained by a traditional single-drug dosing approach. However, the apparent permeability coefficients of the test drugs across Caco-2 monolayers measured by the sample pooling or cassette dosing (up to five drugs co-administered in this study) strategy were in good conformity with the data obtained by single-drug dosing followed by discrete sample analysis.     

Bioactivation of self-immolative dendritic prodrugs by catalytic antibody 38C2

Self-immolative dendrimers have recently been developed and introduced as a potential platform for a multi-prodrug. These unique structural dendrimers can release all of their tail units, through a self-immolative chain fragmentation, which is initiated by a single cleavage at the dendrimer's core. Incorporation of drug molecules as the tail units and an enzyme substrate as the trigger can generate a multi-prodrug unit that will be activated with a single enzymatic cleavage. We have synthesized the first generation of dendritic prodrugs with doxorubicin and camptothecin as tail units and a retro-aldol retro-Michael focal trigger, which can be cleaved by catalytic antibody 38C2. The bioactivation of the dendritic prodrugs was evaluated in cell-growth inhibition assay with the Molt-3 leukemia cell line in the presence and the absence of antibody 38C2. The dendritic unit was applied as a platform for a heterodimeric prodrug, which achieved a remarkable increase in toxicity with its bioactivation.     

Computer-assisted choice of discrete spacers for anionic isotachophoresis separations

In isotachophoresis (ITP), the sample constituents migrate, depending on their concentrations in the loaded sample, either in fully developed zones or in the boundary layers between the zones of constituents of the corresponding effective mobilities. The latter (spike) migration mode is analytically beneficial in selective detections of trace analytes, especially, when appropriately chosen discrete spacers minimize detection interferences due to matrix constituents. To facilitate a search for suitable mixtures of discrete spacers, a two-step calculation procedure was developed in this work. Using a pool of discrete spacers consisting of 42 anionic and zwitterionic constituents, this procedure was shown effective in the anionic ITP separations performed at pH = 6.5-10.0. Besides the predictions of the migration orders, it was helpful in identifying the spacing constituents that could cause resolution problems due to an uncertainty with which pH of the leading electrolyte solution is known. The ionic mobility and pKa data, taken for the spacing constituents from the literature and the ones obtained from the ITP experiments carried out in this work, were used in the calculations performed in a context with the choice of spacers. Although the data obtained from the ITP experiments provided better results, small uncertainties with which they were acquired (attributable to fluctuations in the experimental conditions) set practical limits in the calculation based choice of multi-component mixtures of the spacing constituents.     

Synthesis of nucleoside boranophosphoramidate prodrugs conjugated with amino acids

[structure: see text] Nucleoside boranophosphates and nucleoside amino acid phosphoramidates have been shown to be potent antiviral and anticancer agents with the potential to act as nucleoside prodrugs. A combination of these two types of compounds results in a boranophosphoramidate linkage between the nucleoside and amino acid. This new class of potential prodrugs is expected to possess advantages conferred by both types of parent compounds. Two approaches, specifically the H-phosphonate and oxathiaphospholane approaches, are described here to synthesize nucleoside boranophosphoramidate prodrugs conjugated with amino acids. The H-phosphonate approach involves a key intermediate, silylated nucleoside amino acid phosphoramidite 6, prepared from a series of reactions starting from nucleoside H-phosphonate in the presence of condensing reagent DPCP. Due to the lengthy procedure and the difficulties in removing DPCP from the final products, we switched to the oxathiaphospholane approach in which the DBU-assisted oxathiaphospholane ring-opening process constituted a key step for the generation of nucleoside amino acid boranophosphoramidates 24. We demonstrate that this key step did not cause any measurable C-racemization of boranophosphorylated amino acids 22. Diastereomers of compounds 24a-f were separated by RP-HPLC. An "adjacent"-type mechanism is proposed to explain the diastereomer ratio in the final products obtained via the oxathiaphospholane approach. A tentative assignment of configuration for the diastereomers was carried out based on the mechanism, molecular modeling, and (1)H NMR. Conclusively, the oxathiaphospholane methodology proved to be more facile and efficient than H-phosphonate chemistry in the preparation of the nucleoside amino acid boranophosphoramidate analogues that are promising as a new type of antiviral prodrugs.     

Calibration procedure for gel permeation chromatography

A novel procedure is presented for calibrating a gel permeation chromatograph by using broad polymer fractions. The limit in accuracy is set by the accuracy of number-average and weight-average molecular weight measurements and the reproducibility of the chromatograph. In the particular calibration for linear polyethylene described here, low molecular weight fractions were prepared by nitric acid oxidation of annealed single crystals. The calibration is then of particular value in morphological studies of polyethylene. The influence in the calibration of polar endgroups on the polymer, as produced in these oxidized samples is discussed.     

Interfacial dilational properties of anionic gemini surfactants with polymethylene spacers

The dilational properties of anionic gemini surfactants alkanediyl-α,ω-bis(m-octylphenoxy sulfonate) (C₈C_mC₈) with polymethylene spacers at the water–air and water–decane interfaces were investigated by oscillating barriers and interfacial tension relaxation methods. The influences of oscillating frequency and bulk concentration on the dilational properties were explored. The experimental results show that the linking spacer plays an important role in the interfacial dilational properties. The moduli pass through one maximum for all three gemini surfactants at both water–air and water–decane interfaces. However, the values of moduli at the water–air interface are obviously higher than those at the water–decane interface because the sublayer formed by spacer chains will be destroyed by the insertion of oil molecules. Moreover, with the increase of spacer length, the surface adsorption film becomes more viscous at high concentration, which can be attributed to the process involving the formation of the sublayer. On the other hand, the spacers of the adsorbed C₈C₆C₈ molecules will extend into the oil phase when the interface is compressed. As a result, the interfacial film becomes more elastic with the increase of spacer length at high concentration. The experimental results obtained by the interfacial tension relaxation measurements are in accord with those obtained by the oscillating barriers method.     

Mathematical model of electrodialysis with ion-exchange membranes and inert spacers

A mathematical model describing the two-dimensional concentration field of an electrodialysis device with inert spacers is proposed. The boundary-value problem includes the Navier-Stokes, continuity, and steady-state convective diffusion equations and well-defined conditions and is solved by the control-volume numerical method. Results are expressed in the form of functional relationships of generalized variables. It is shown that when channels of the electrodialysis device are filled with spacers that do not conduct electric current, mass transport increases by several times in comparison to devices with open channels. The possibility is discussed for replacing the inert spacers with ones that conduct ion, not only in the complete demineralization of natural waters, but also in the desalination of brackish ground waters.     

Basic properties of porphyrins with polyethylenoxide spacers of various length

Basic properties of bis[5-(3-oxyphenyl)-2,8,12,18-tetrabutyl-3,7,13,17-tetramethylporphyrinyl]-3,6,9-trioxyundecane-1,11 and bis[5-(3-oxyphenyl)-2,8,12,18-tetrabutyl-3,7,13,17-tetramethylporphyrinyl]-3,6,9,12-tetraoxytetradecane-1,14 were studied by the spectrophotometric titration in ethanol-sulfuric acid system at 298 K. It was established that protonation of nitrogen atoms in tetrapyrrole fragments of dimeric porphyrins proceeds in two steps. The corresponding ionization constants and the concentration limits of existence of di- and tetracationic forms of the compounds under study were evaluated.