Improvement of properties of silica‐filled styrene‐butadiene rubber composites through plasma surface modification of silica

The performance of plasma surface modified silica filler in styrene‐butadiene rubber (SBR) matrix has been analyzed. The conditions of plasma modification have been optimized by taking secant modulus as a standard parameter and the occurrence of the modification has been confirmed by surface area determination and Fourier transform infrared spectroscopy. The plasma‐modified surface of silica has been found to be composed of carbon–carbon double bonds and carbon–hydrogen bonds. Silane treatment also has been carried out on silica filler surface for a comparative assessment of its influence in the curing behavior and filler–rubber interaction. The cure reactions of all the rubber compounds have been found to be proceeded according to first‐order kinetics. A reduction in the cure reaction rate constant has been observed with the loading of unmodified and surface modified silica, emphasizing the cure deactivation of the matrix rubber by the silica filler. The filler dispersion, as revealed by scanning electron microscopy, has been found to be greatly improved by the plasma as well as silane treatment. The filler–rubber interaction has been found to be greatly improved by both surface treatments, but the best balance of mechanical properties has been observed with plasma surface modification only. Copyright © 2004 John Wiley & Sons, Ltd.     

Interaction of azide ion with hemin and cytochrome c immobilized on Au and Ag nanoparticles

This paper presents a set of investigations on the binding of a metabolic inhibitor, azide with prosthetic heme group of biomolecules, hemin chloride (Hem) and cytochrome c (Cyt c) immobilized on Au and Ag nanoparticles. A variety of spectroscopic tools have been used to understand the chemistry occurring on the nanoparticle surface. While the nature of binding of the model system, hemin has been investigated by UV-visible, fluorescence, FTIR, and Raman spectroscopies, the azide binding has been studied in detail by MALDI-TOF MS. Hemin binding on the nanoparticle surface occurs through the carboxylic acid groups. The hemin-N(3) adduct on the nanoparticle surface has been detected by mass spectrometry and its fragments have been studied by post source decay analysis. The chemistry of hemin on the nanoparticle surface has been compared with that of the protein, Cyt c. Azide binding of Cyt c requires thermal activation due to reduced accessibility of the heme center, unlike in the case of hemin. The binding chemistry is similar for free Cyt c and Cyt c bound to the nanoparticles.     

In-situ infrared spectroscopic studies of adsorption processes on boehmite particle films: exchange of surface hydroxyl groups observed upon chelation by acetylacetone

Adsorption processes on poorly crystalline boehmite (PCB) particle films have been studied using attenuated total reflection infrared spectroscopy. This method allows the in-situ investigation of wet surface chemical processes. Thin films of aggregated particles of PCB that are stable between pH 4 and 11 have been prepared by drying aqueous PCB dispersions. Carbonate adsorbs to the PCB films during the film formation process but can be removed without impact on the film by washing with alkali at pH 10. The adsorption of acetylacetone (acac) to the surface of PCB has been studied at the solid/liquid and solid/gas interfaces. The concomitant changes in the OH deformations of hydroxyl groups present on the surface has been observed. The IR absorption of surface hydroxyl groups involved in adsorption of a bidentate chelating ligand have been spectroscopically isolated through their interaction with acac.     

A Plasma Surface Treatment of Polyester Textile Fabrics Used for Reinforcement of Car Tires

Polyester tire cord surfaces have been modified by plasma at low temperature and atmospheric pressure. The surface treatment has been executed by various nonequilibrium discharges, namely by barrier discharge, atmospheric pressure glow discharge and gliding arc. The polymeric multicord sewing threads treated by this procedure have been used in the same form as in industry, i.e., with the protecting oil films on their surface. The surface properties have been investigated by electron spin resonance spectroscopy and by measuring their contact angle with various liquids; partially the zeta potential measurements have been used, too. Further tests have been done at an industrial testing impregnation line using the common technology and conditions, on both plasma treated and untreated fibers. Finally, the standard H-tests and peel-tests have been used to characterize the fiber adhesion to usual testing rubbers.     

Solvatochromism as an alternative for contact angle measurements in the characterisation of modified polymer surfaces

Polyolefine surfaces have been pre-treated by UV/ozone and UV/water methods. The increase in polar groups on a polymer surface and the contribution of these polar groups to the adhesion of the polymer has been investigated by using contact angles and tensile strength tests. Because contact angle measurements do not give information about the specific polar groups on the surface we have used solvatochromic analyses to identify specific polar groups. The results showed that solvatochromic analyses is a promising method to discriminate between different kinds of polar groups and therefore solvatochromic surface characterisation may become an important surface analytical tool in adhesive technology.     

Ordered honeycomb-structured gold nanoparticle films with changeable pore morphology: from circle to ellipse

Two-dimensionally ordered honeycomb structures have been prepared on dodecanethiol-capped gold nanoparticle films by blowing moist air across the surface of the nanoparticle solution. The pore morphology can be altered from circle to ellipse with tunable aspect ratios by carefully controlling the direction and velocity of airflow. The formation mechanisms of different surface morphologies have been discussed in terms of the surface and interfacial tension.     

功函数测量研究氧与银和银-钯合金表面的相互作用

在超高真空条件下, 采用电子束阻挡势技术测量固体表面功函数连续变化, 并与AES, TDS等手段相配合, 研究了氧在Ag和Ag-Pd合金表面的吸附和脱附动力学。结果表明, 在Ag和Ag-Pd合金表面的两种不同的氧吸附态, 具有相反的电荷转移效应, 未解离的分子态吸附降低了表面功函数, 而解离的原子态氧吸附使表面功函数明显升高。与纯银相比, 氧在银钯合金表面吸附具有较小的粘附系数和较大的偶极矩。银钯合金组成变化时功函数和AES的连续测量表明, 表面结构从无序向有序转变和表面银偏析均为功函数降低过程。     

Influence of surface structure on surface analytical statements

The influence of surface structure of technical materials on results and statements of surface analytical methods has been investigated. Especially surface roughness as a typical property of rolled products has been observed. For this purpose samples of steel (technical surface, roughness up to 5 m) and silicon wafers (polished surface) have been analyzed by SNMS and GDOS in order to get information about changes of the surface roughness as function of the sputtering time and their influence on the statements about the depth profiles obtained.     

Surface morphology of poly(cyano-p-xylylene) thin films

The surface morphology of poly(cyano-p-xylylene) thin films of different thicknesses (25–1500 nm or more than 5 μm) that were synthesized by vapor-deposition polymerization on the substrate surface in the temperature range from −22 to +35°C has been studied by atomic force microscopy. The surface topography is quantified through analysis of the height-height correlation function. The surface of all films is characterized by a similar granular morphology with a transverse size of granules of 50–500 nm. The surface morphology changes with the polymerization temperature (the substrate temperature) and the film thickness. The effect of film annealing on its surface morphology is considered. It has been established that annealing at 200°C leads to a change in the surface morphology of the films. Original Russian Text ? A.I. Buzin, D.S. Bartolome, K.A. Mailyan, A.V. Pebalk, S.N. Chvalun, 2006, published in Vysokomolekulyamye Soedineniya, Ser. A, 2006, Vol. 48, No. 9, pp. 1640–1646. This work was supported by the Russian Foundation for Basic Research (project nos. 03-03-32665 and 03-03-32634) and the Russian Science Support Foundation.     

Radiation-induced polymerization and grafting of β(−)pinene on silica surface

Poly-β-pinene (pBp) was obtained on silica surface by γ radiation-induced polymerization of β(−)pinene in presence of silica gel with a specific surface area of 300 m²/g. Different radiation doses were employed in the range 50–332 kGy. The pBp–silica hybrid samples obtained have been characterized by FT-IR spectroscopy and the amount of pBp on silica surface has been determined both by gravimetric and TGA measurements. The fraction of pBp chemically grafted on silica surface has been determined by the extraction of the pBp–silica hybrid with boiling toluene and was found to be 10–20% of the total pBp formed on silica surface. The optical activity of pBp extracted from the hybrid was studied by polarimetric measurements and found slightly lower than the typical specific optical rotation of pBp polymerized in bulk with radiation. The thermal stability of the pBp–silica hybrid materials was studied by thermogravimetric and differential thermal analysis. The results show lower thermal stability for the pBp–silica hybrid in comparison to pure pBp. Evidently, silica catalyzes the thermal decomposition of pBp at lower temperatures. Use of the pBp–silica hybrid as stationary phase for liquid chromatography for chiral separations has been proposed.     

Quantitative aspects of the desorption of copper from the silicon (100) surface

The desorption of copper from copper contaminated Si(100) samples has been investigated by thermal desorption spectroscopy (TDS). The samples have been contaminated with aqueous CuSO(4)/EDTA solutions. The amount of copper deposited on the Si surface was in the monolayer region as determined by means of ratio-tracer experiments. The copper is adsorbed on the sample surface in two different states, which could be resolved by TDS. By means of STM and XPS measurements it was possible to assign these two desorption peaks to the desorption of copper from carbon deposits, which had already been present before the contamination process, and to the desorption of copper from the bare Si surface.     

Exciplexes photonics on the silica surface

Processes of photoinduced electron transfer and formation of bimolecular complexes on the surface of nonporous dispersed silica and aerosil have been explored. Complexes of the two types, with a dissociative (acene + electron donor) and a stable (acene + acceptor) ground state have been obtained. Formation of the anthracene-N,N-diethylaniline exciplex on the surface proceeds in a diffusion mode. Increasing the quencher concentration to σ = 1% is accompanied by exciplex formation. Formation and stabilization of Mullican’s (dark) complexes has been noted with σ = 10%. The reaction of complexation on the surface is stimulated by heating. A suggestion of CTC localization in places of the highest energetic uniformity of the surface has been made.     

Surface amination of poly(acrylonitrile)

The surface amination of poly (acrylonitrile) by ammonia plasma treatment has been studied. Furthermore, two other surface modification techniques have been investigated, the plasma chemical decomposition of an amino group containing chemical (tris-(2-aminoethyl)amine) onto the polymer surface and the surface reduction by lithium aluminium hydride. The three different methods are compared with respect to the adhesion improvement of the coatings onto the modified surfaces.The number of groups introduced on the surfaces has been determined by a wet chemical method.     

Stochastic simulation of physicochemical processes performance over supported metal nanoparticles

The statistical lattice model has been proposed which permits one to take into account the change in the shape and surface morphology of the nanoparticle under the influence of the reaction media. The influence of monomolecular and dissociative adsorption on the particles equilibrium shape and surface morphology has been studied. It has been shown that by taking into account of attraction "adsorbate-metal" the reshaping of the initial hemispheric particle into cone-shaped one occurs induced by adsorption, similar to the experimentally observed reversible reshaping of active nanoparticles. The model reaction A+B(2) has been studied taking into account the roughening of the active particle surface and the spillover phenomena of the adsorbed A(ads) species over the support surface.     

Stable superhydrophobic and lipophobic conjugated polymers films

With a view to developing repellent materials combining both low surface energy and rough structure, original semi-fluorinated polythiophenes have been chemically and electrochemically synthesized and characterized by cyclic voltammetry, GPC, and UV-visible measurements. Polymer films have been deposited onto different substrates by drop casting a soluble polymer fraction on glass plate or by electrodeposition on ITO plate. Surface properties and particularly water and oil repellencies have been investigated by goniometry and correlated with the surface morphology and structure observed by SEM. The incorporation of fluorocarbon chains in the rigid polythiophene backbone yields very low surface free energy materials. Moreover, the way of deposition has a huge influence on the quality and performance of the film surface properties. Electroformed polymers, due to rough surfaces, exhibit great super-hydrophobic and lipophobic properties together with exceptional time stability.     

Kinetics of americium(VI) mass transfer through solid supported liquid membrane with HDEHP

The main regularities of membrane extraction of americium under conditions of different redox potentials in aqueous phases have been studied. The physico-chemical model of the process including steps of americium oxidation in feed solution, extraction by membrane, partial reduction on membrane surface, trans-membrane diffusion and reextraction to strip solution has been developed. The calculation of reduction rate constant on membrane surface has been carried out.     

Nanoparticle-wall collision in a laminar cylindrical liquid jet

Although nanoparticle impacts on a solid surface always occur in natural or engineering processes and cause extensive investigations, less works have been reported on the nanoparticle-wall collisions in a liquid. In present paper, by considering the inertial effect and the Brownian motion of nanoparticles, a theoretical model was established for calculating the collision frequency between the nanoparticles and the solid surface in a laminar cylindrical liquid jet impacting normally on the solid surface. The analysis showed that the collision frequency grows as the square root of the impacting speed for low impacting speed regime in which the Brownian motion is predominant, whereas increases as the second power of the impacting speed for high impacting speed regime in which the inertial effect is predominant. Meanwhile, an observation system for nanoparticle-wall collisions in a laminar cylindrical liquid jet has been developed. The adsorption of the nanoparticles on the solid surface after collision has also been observed. Because of their lower attractive energy with the solid surface, these adsorbed nanoparticles are easier to be removed by the hydrodynamic force of the impacting liquid than that deposited on a dry surface.     

Methanol adsorption on the beta-Ga2O3 surface with oxygen vacancies: theoretical and experimental approach

Methanol adsorption on beta-Ga2O3 surface has been studied by Fourier transform infrared spectroscopy (FTIR) and by means of density functional theory (DFT) cluster model calculations. Adsorption sites of tetrahedral and octahedral gallium ions with different numbers of oxygen vacancies have been compared. The electronic properties of the adsorbed molecules have been monitored by computing adsorption energies, optimized geometry parameters, overlap populations, atomic charges, and vibrational frequencies. The gallia-methanol interaction has different behaviors according to the local surface chemical composition. The calculations show that methanol can react in three different ways with the gallia surface giving rise to a nondissociative adsorption, a dissociative adsorption, and an oxidative decomposition. The surface without oxygen vacancies is very reactive and produces the methanol molecule decomposition. The molecule is nondissociatively adsorbed by means of a hydrogen bond between the alcoholic hydrogen atom and a surface oxygen atom and a bond between the alcoholic oxygen atom and a surface gallium atom. Two neighbor oxygen vacancies on tetrahedral gallium sites produce the dissociation of the methanol molecule and the formation of a bridge bond between two surface gallium atoms and the methoxy group.     

Quantitative aspects of the desorption of copper from the silicon (100) surface

The desorption of copper from copper contaminated Si(100) samples has been investigated by thermal desorption spectroscopy (TDS). The samples have been contaminated with aqueous CuSO₄/EDTA solutions. The amount of copper deposited on the Si surface was in the monolayer region as determined by means of ratio-tracer experiments. The copper is adsorbed on the sample surface in two different states, which could be resolved by TDS. By means of STM and XPS measurements it was possible to assign these two desorption peaks to the desorption of copper from carbon deposits, which had already been present before the contamination process, and to the desorption of copper from the bare Si surface.