多环芳烃指纹用于渤海采油平台原油的鉴别

采用气相色谱/质谱方法,对渤海海上4个不同区块、5个平台的6口油井原油进行了烷基化多环芳烃系列化合物和美国环保署（EPA）优先控制多环芳烃系列化合物的准确定性定量分析。通过多环芳烃原始指纹谱图、多环芳烃组分分布模式和特征比值的比较对上述原油进行鉴别。结果证明不同区块的原油中多环芳烃指纹信息不尽相同,即使在同一平台不同油井中所产的原油其指纹也存在一定差异。为确保原油鉴别的准确性,分析过程中必须在仪器的稳定性和样品前处理方面实施严格的质量控制措施。     

Analysis of polycyclic aromatic hydrocarbons (PAHs) in environmental samples: a critical review of gas chromatographic (GC) methods

Polycyclic aromatic hydrocarbons (PAHs) are frequently measured in the atmosphere for air quality assessment, in biological tissues for health-effects monitoring, in sediments and mollusks for environmental monitoring, and in foodstuffs for safety reasons. In contemporary analysis of these complex matrices, gas chromatography (GC), rather than liquid chromatography (LC), is often the preferred approach for separation, identification, and quantification of PAHs, largely because GC generally affords greater selectivity, resolution, and sensitivity than LC. This article reviews modern-day GC and state-of-the-art GC techniques used for the determination of PAHs in environmental samples. Standard test methods are discussed. GC separations of PAHs on a variety of capillary columns are examined, and the properties and uses of selected mass spectrometric (MS) techniques are presented. PAH literature on GC with MS techniques, including chemical ionization, ion-trap MS, time-of-flight MS (TOF-MS), and isotope-ratio mass spectrometry (IRMS), is reviewed. Enhancements to GC, for example large-volume injection, thermal desorption, fast GC, and coupling of GC to LC, are also discussed with regard to the determination of PAHs in an effort to demonstrate the vigor and robustness GC continues to achieve in the analytical sciences.     

Application of headspace GC/MS screening and general parameters for the analysis of polycyclic aromatic hydrocarbons in groundwater samples

Groundwater samples from a former gas plant site were investigated by headspace GC/MS and general parameters with regard to organic pollution. The contamination plume was distinguished from background with GC/MS headspace and dissolved organic carbon analyses. Headspace GC/MS analyses of these samples revealed the presence of several aromatic and heterocyclic compounds typical to coal tar leachates. Selected ion monitoring GC/MS was used to establish the relative contamination level of seven selected polycyclic aromatic hydrocarbons (PAH) from 9 sampling wells. Three wells showed a high contamination level and therefore, they could be attributed to the vicinity of contamination sources. Well samples downgradient from the pollution source showed decreasing contamination levels for all compounds except acenaphthene.     

Determination of polycyclic aromatic hydrocarbons in water by gas chromatography/mass spectrometry with accelerated sample preparation

A novel simplified sample preparation method for quantitative analysis of polycyclic aromatic hydrocarbons (PAH) in water samples by gas chromatography/mass spectrometry (GC/MS) was proposed. The method requires just 1 mL of water and 1 mL of dichloromethane. The detection limits of PAH with the use of high resolution GC/MS are about 1 μg/Λ, while the limits of quantification—10 μg/L. These limits correspond to those for the standard 8270 method of the United States Environmental Protection Agency.     

Analysis of alkyl and 2-6-ringed polycyclic aromatic hydrocarbons by isotope dilution gas chromatography/mass spectrometry. Quality assurance and determination in Spanish river sediments

An accurate, precise and sensitive method is described for the analysis of 29 polycyclic aromatic hydrocarbons (PAHs), including 19 2-6-ringed PAHs and 10 alkyl-PAHs. The method is based on an isotope dilution technique using gas chromatography/mass spectrometry (GC/MS) and available labeled PAHs as internal standards. Quality parameters were calculated with satisfactory results and 36 Spanish river sediments were analysed. Results were evaluated regarding to the sediment quality guidelines (SQGs) based on the effects range-low (ERL) and the effects range-median (ERM) values. Most analysed sediments showed a good quality, since only 7 of them exceeded ERL values, including one sample surpassing ERM values. PAH profiles were studied in order to identify PAH sources as mainly petrogenic or pyrogenic. Most samples showed petrogenic-type fingerprints, although 6 of the 11 sediments with the highest PAH concentrations (> 1000 ng/g) were classified as pyrogenic, including 4 of the 7 samples exceeding ERL values. Quality assurance was carried out by the triplicate analysis of one preanalysed river sediment without PAHs subsequently spiked at a medium (500 ng/g) and a low concentration level (10 ng/g) of each analyte. Main quality requirements for methods based on isotope dilution were accomplished. Method accuracy was 80-120% for most PAHs, method precision was <15% for all the analysed compounds and method detection limits (MDLs) were 1-3 ng/g.     

Optimisation of pre-treatment and ionisation for GC/MS analysis for the determination of chlorinated PAHs in atmospheric particulate samples

Chlorinated polycyclic aromatic hydrocarbons (ClPAHs) have been discovered to represent ubiquitous environmental pollutants in the last decade. In the present study, sample pre-treatment and ionisation conditions associated with the gas chromatography/mass spectrometry (GC/MS) analysis of ClPAHs were evaluated. The optimal pre-treatment of ambient air particulate samples was achieved using fractionation over silica gel with 10% dichloromethane in n-hexane as the eluent. The optimised condition of GC/MS with electron impact ionisation permitted analysis of all target ClPAHs. Not all target ClPAHs were detected using GC/MS with negative chemical ionisation, although this technique exhibited greater sensitivity for several of the compounds compared to electron impact ionisation. The analytical method was applied to the survey of ClPAHs in atmospheric particulate matter obtained close to an industrial site and in a standard sample of tunnel dust. Fourteen and eighteen species of ClPAHs were detected in the industrial air samples and tunnel dust, respectively, confirming the capability of the method. The compositions of ClPAHs were significantly different between air samples and tunnel dust. It suggests that alternative emission sources rather than vehicle exhaust could play a significant role in the air.     

Comparison of microprobe two-step laser desorption/laser ionization mass spectrometry and gas chromatography/ mass spectrometry studies of polycyclic aromatic hydrocarbons in ancient terrestrial rocks

Microprobe two-step laser desorption/laser ionization mass spectrometry (μL²MS) and gas chromatography/mass spectrometry (GC/MS) were used to analyze polycyclic aromatic hydrocarbons (PAHs) in ancient terrestrial rocks. μL²MS provides an in situ analysis of very small samples, records the PAHs with no isomer information, and gives quantitative data on the degree of alkylation of a given PAH series over the complete mass range. GC/MS provides isomer separation and quantitation of PAHs in bitumen but not kerogen, and is limited by sample size. Combination of these techniques allows analysis of very small samples by μL²MS with GC/MS confirmation of isomer distributions of the solvent extractable components (bitumen). It was found that the concentration of bitumen within the rock samples affects the PAH alkylation signal for μL²MS. At low bitumen concentrations μL²MS can produce pyrolysis products from kerogen that is present; however, as bitumen concentrations increase, the PAH distribution from bitumen dominates the signal.     

Novel approach to microwave-assisted extraction and micro-solid-phase extraction from soil using graphite fibers as sorbent

A single-step extraction-cleanup procedure involving microwave-assisted extraction (MAE) and micro-solid-phase extraction (micro-SPE) has been developed for the analysis of polycyclic aromatic hydrocarbons (PAHs) from soil samples. Micro-SPE is a relatively new extraction procedure that makes use of a sorbent enclosed within a sealed polypropylene membrane envelope. In the present work, for the first time, graphite fiber was used as a sorbent material for extraction. MAE-micro-SPE was used to cleanup sediment samples and to extract and preconcentrate five PAHs in sediment samples prepared as slurries with addition of water. The best extraction conditions comprised of microwave heating at 50 degrees C for a duration of 20 min, and an elution (desorption) time of 5 min using acetonitrile with sonication. Using gas chromatography (GC)-flame ionization detection (FID), the limits of detection (LODs) of the PAHs ranged between 2.2 and 3.6 ng/g. With GC-mass spectrometry (MS), LODs were between 0.0017 and 0.0057 ng/g. The linear ranges were between 0.1 and 50 or 100 microg/g for GC-FID analysis, and 1 and 500 or 1000 ng/g for GC-MS analysis. Granular activated carbon was also used for the micro-SPE device but was found to be not as efficient in the PAH extraction. The MAE-micro-SPE method was successfully used for the extraction of PAHs in river and marine sediments, demonstrating its applicability to real environmental solid matrixes.     

Evaluation of an in-injection port thermal desorption-gas chromatography/mass spectrometry method for analysis of non-polar organic compounds in ambient aerosol samples

Thermal desorption coupled with gas chromatography/mass spectrometry (TD-GC/MS) is an alternative to solvent extraction (SE)-based GC/MS (SE-GC/MS) for the analysis of non-polar organic compounds in filter or impactor-collected aerosols. TD-GC/MS has no sample pretreatment and requires a small filter aliquot for detecting individual organic compounds. The performance of an in-injection port TD-GC/MS is evaluated for polycyclic aromatic hydrocarbons (PAHs), n-alkanes, iso-/anteiso-alkanes, hopanes, steranes, branched alkanes, cyclohexanes, alkenes, and phthalates in standards and ambient air samples. Replicate analysis for 132 organic compounds showed relative standard deviations <10%, with the majority <5%. Accuracy for 15 PAHs, determined with NIST standard reference material (SRM) 1649a urban dust, was within +/-5% of the certified values. TD-GC/MS and SE-GC/MS method comparisons for 14 Hong Kong ambient samples agreed within 11% for 106 non-polar compounds. For 19 Tong Liang, China samples, agreement was within 13% for 23 PAHs.     

Detection of PAH of molecular weight between 300 and 402 in airborne particulate matter by fused silica capillary GC and GC/MS

Gas chromatography (GC), low-voltage mass spectrometry (LV MS), and gas chromatography/mass spectrometry (GC/MS) have been used for detecting polycyclic aromatic hydrocarbons (PAH) of molecular weight between 300 and 402 in airborne particulate matter. Nearly 200 high molecular PAH separated by fused silica capillary columns could be characterized by their El mass spectra. The lack of reference substances precluded further structure elucidation.     

Rapid analysis of PAHs in fly ash using thermal desorption and fast GC-TOF-MS

Polycyclic aromatic hydrocarbons (PAHs) are semivolatile organic compounds that may form as a result of incomplete combustion of organic materials. After they are produced in combustion systems, this class of chemicals can be emitted with flue gas or adsorbed in combustion residues such as fly ash and bed ash. The purpose of this study is to develop a thermal extraction (TE) method for the determination of the 16 U.S. Environmental Protection Agency specified priority PAH pollutants in fly ash. The commonly used method for determining PAHs in solid wastes is solvent extraction followed by gas chromatography (GC) or GC-mass spectrometry (MS) analysis. This method is work- and time-intensive and produces solvent waste. In this study, the samples are analyzed using TE and fast GC-time-of-flight (TOF)-MS. The complete process from extraction to analysis can be achieved in less than one hour. The results indicate that the TE-GC-TOF-MS method has good linear range from 1.5 to 60 micro g/g for all 16 PAHs. The recoveries for the 16 target PAHs vary between 83% and 94%.     

Polycyclic aromatic hydrocarbon analysis in different matrices of the marine environment

Polycyclic aromatic hydrocarbons (PAHs) were determined in marine samples of various types, i.e. seawater, sediment and mussel homogenate samples. The samples were spiked with standard PAH mixtures in both polar (acetonitrile) and non-polar (i-octane) solvents, then extracted. Extraction from seawater was performed by liquid/liquid extraction to hexane (LLE) and with solid phase extraction (SPE) discs. The water samples were filtered and unfiltered seawater, and redistilled water for comparison. The discs with PAHs adsorbed from water samples, and also the sediment and mussel homogenate samples, were extracted with acetonitrile by sonication. PAHs in the disc extracts and from the LLE were cleaned-up using TLC and next determined by GC/MS/IT (with ion-trap) and HPLC-DAD/UV. The analytical procedures were verified with deuterated PAH standard mixtures. The large differences in PAH recoveries (from 12 to 86% for sum, and from 3 to 135% for particular PAHs) do not depend solely on the type of matrix and analytical procedure applied (e.g. standard solvent, volume of evaporated sample), but also on the concentration and molecular structure of the analyte. Usually, only a fraction of each PAH content in the matrix is determined, depending on the particulate matter in seawater and the sorption properties of the solid matrix. The recoveries of deuterated PAHs are higher than those of non-deuterated compounds.     

A reliable analytical approach based on gas chromatography coupled to triple quadrupole and time‐of‐flight mass analyzers for the determination and confirmation of polycyclic aromatic hydrocarbons in complex matrices from aquaculture activities

The potential of gas chromatography coupled to tandem mass spectrometry (GC/MS/MS) with a triple quadrupole analyzer (QqQ) has been investigated for the quantification and reliable identification of sixteen polycyclic aromatic hydrocarbons (PAHs) from the EPA priority list in animal and vegetable samples from aquaculture activities, whose fat content ranged from 5 to 100%. Matrices analyzed included fish fillet, fish feed, fish oil and linseed oil. Combining optimized saponification and solid‐phase extraction led to high efficiency in the elimination of interfering compounds, mainly fat, from the extracts. The developed procedure minimized the presence of these interfering compounds in the extracts and provided satisfactory recoveries of PAHs. The excellent sensitivity and selectivity of GC/(QqQ)MS/MS in selected reaction monitoring (SRM) allowed to reach limits of detection at pg/g levels. Two SRM transitions were acquired for each analyte to ensure reliable identification of compounds detected in samples. Confirmation of positive findings was performed by GC coupled to high‐resolution time‐of‐flight mass spectrometry (GC/TOFMS). The accurate mass information provided by GC/TOFMS in full acquisition mode together with its high mass resolution makes it a powerful analytical tool for the unequivocal confirmation of PAHs in the matrices tested. The method developed was applied to the analysis of real‐world samples of each matrix studied with the result of detecting and confirming the majority of analytes at the µg/kg level by both QqQ and TOF mass spectrometers. Copyright © 2009 John Wiley & Sons, Ltd.     

Evaluation of chromatographic and spectroscopic methods for the analysis of petroleum-derived compounds in the environment

Summary Analytical protocols have been adapted for the study of hydrocarbons at the trace level in the environment. Various samples, including sediments and biota, were collected from the Kuwaiti environment, treated according to the protocol and analyzed by chromatographic and spectroscopic methods. The methods used were synchronous scanning fluorescence spectroscopy (SSFS); high-performance liquid chromatography (HPLC) on C18 reversed-phase and NH2 normal-phase columns with UV and fluorescence detectors; gas chromatography on fused-silica capillary columns (GC) with flame ionization detector (FID), mass spectrometer (MS) and flame photometric detector (FPD); and high-resolution molecular spectrofluorimetry in Shpol'skii matrix at 10 K (HRSS). The different methods were found to give complementary information. SSFS was useful for fast evaluation and preliminary assessment of oil pollution during extended programs; it permitted sample selection for deeper analyses but, when applied to biota, needed special care in the clean-up procedure. GC/FID, was used to analyze saturated and ethylenic compounds and was useful for obtaining information on the origin of hydrocarbons but inconvenient for analyzing the aromatic fraction. GC/FPD was difficult to use with sediment samples and yielded little information on biota samples, although it did permit confirmation of high oil contamination in some examples. HPLC on a normal-phase column with UV and fluorescence detectors was useful for the fractionation of samples and for the separation of different families of aromatic compounds according to aromatic carbon number. GC/MS was used to quantify polycyclic aromatic hydrocarbons (PAHs) of less than four cycles but was not sensitive enough for PAHs of higher molecular weight. HRSS, however, was useful for the quantification of heavy PAHs and was also faster, could be automated, and gave accurate results. However, in an oil-pollution study, it must be backed up by the other techniques. In fact, no single analytical technique was found to be sufficient, and only judicious combinations of the tested techniques yielded adequate information on the origin of hydrocarbons in the environment.     

Application of direct thermal desorption gas chromatography and comprehensive two-dimensional gas chromatography coupled to time of flight mass spectrometry for analysis of organic compounds in ambient aerosol particles

Semivolatile organic compounds (SVOC) associated with ambient particles smaller than 2.5 microm (PM2.5) were determined in the city of Augsburg, Germany. Daily samples were collected at a central monitoring station from late summer 2002 to spring 2005. SVOC were analysed by direct thermal desorption (DTD)-GC and comprehensive 2-D GC coupled to TOF MS (DTD-GC-TOF MS and DTD-GC x GC-TOF MS). Two hundred compounds were quantified and 'semi-quantified' on a daily basis by DTD-GC-TOF MS. n-Alkanes, n-alkan-2-ones, n-alkanoic acid methyl esters, acetic acid esters, n-alkanoic acid amides, nitriles, linear alkylbenzenes and 2-alkyl-toluenes, hopanes, PAH, alkylated PAH and oxidised PAH, and several compounds that are not-grouped in homologous rows or compound classes were determined. Changes in concentration and pattern of several target compounds as well as methodological advantages and restrictions of DTD-GC-TOF MS are briefly discussed. DTD-GC-TOF MS analysis provided data particularly suited for source receptor modelling and epidemiological time series studies on the health effects of ambient PM. GC x GC enhances chromatographic resolution of PM samples and therefore amplifies the peak identification capabilities of the TOF MS.     

Evaluation of surface sediment contamination by polycyclic aromatic hydrocarbons in colony Z3—(Patos Lagoon, Brazil)

This paper describes the extraction and analysis of Polyaromatic Hydrocarbons (PAHs) in five points of the Patos Lagoon Estuary. These points were in the area named “colony Z3”, which is a craft fishermen community in Pelotas City (southern Brazil). Samples were collected in July of 2007, and the concentrations of 16 USEPA priority polycyclic aromatic hydrocarbons (PAHs) were determined by gas chromatography coupled to a mass spectrometry detector (GC/MS). The PAH concentrations ranged from 4.7 to 112.5 µg kg^− 1 dry weight. Sediment samples with the highest PAH concentrations appeared at point 2, which is a pier. The correlation between the total organic material (TOM) and the total PAH concentration suggests that TOM plays an important role in controlling the PAH levels in sediments. According to the observed ratios of individual PAHs, the contamination in the studied areas originated both from high-temperature pyrolytic processes and petrogenic sources. The levels of PAHs at the studied sites in the Z3 colony (Patos Lagoon) were low enough that they should not exert adverse biological effects.     

Evaluation of matrix solid‐phase dispersion extraction for the determination of polycyclic aromatic hydrocarbons in household dust with the aid of experimental design and response surface methodology

A simple, fast, and inexpensive procedure for sample preparation based on matrix solid‐phase dispersion was developed for the determination of Environmental Protection Agency 16 priority polycyclic aromatic hydrocarbons in indoor dust samples. Parameters that affect the extraction efficiency such as type of dispersant, elution solvent, and solvent volume were evaluated and optimized with the aid of experimental design and response surface methodology. Analysis was performed by HPLC coupled with UV‐Vis diode array detector (UV‐DAD). For verification, a GC coupled with a mass spectrometer in SIM mode was also applied. Recoveries obtained were from 53 to 120% for all target analytes with detection limits ranging from 0.2 to 10 ng/g and 0.2 to 2 ng/g for LC‐UV‐DAD and GC‐MS, respectively. The optimized method was used for the analysis of 11 household dust samples collected from private houses.     

成都地区雨水中有机污染物成份的研究

本文采用自行研制的雨水富集提取器吸附富集雨样中复杂有机物，不需预分离，直接用于ＧＣ和ＧＣ／ＭＳ分析。鉴定出１０２种有机物，并对ＢａＰ等２８种主要污染物作了定量测定。     

Clean-up methods for polycyclic aromatic hydrocarbons analyses by capillary gas chromatography

Summary Comparative results of pre-treatment methods for the extracts of polycyclic aromatic hydrocarbons (PAHs) from airborne particulate matter for quantitative determination by gas chromatography (GC) are presented. The first method included liquid-liquid extraction and column liquid adsorption chromatography. In the second procedure the extract was fractionated by liquid-liquid chromatography and liquid adsorption chromatography. In the last procedure two different solid phase extraction (SPE) cartridges examined makes it possible to separate PAHs and remove paraffinic compounds which is very important for the quantitative GC analysis of the PAHs. Recoveries of PAH standards and some their derivatives were determined and the contents of 15 of the most important PAHs, were compared. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Quantitative immunoassay for determining polyaromatic hydrocarbons in electrical insulating oils

The development and application of a combined sample extraction and immunoassay protocol for the quantification of polyaromatic hydrocarbons (PAHs) in transformer oils is reported. Tests were performed on 12 different used transformer oils from three major manufacturers. The removal of matrix interferents was achieved by loading oil fractions onto silica solid phase extraction cartridges and eluting with non-polar solvent prior to evaporation and reconstitution in a more polar medium. Extracts were immunoassayed using two commercially available PAH test kits either having broad specificity towards priority PAHs or enhanced binding specificity toward more carcinogenic PAHs. The total and carcinogenic PAH test kits yielded PAH levels in the oil extracts 5.86-fold and 126-fold lower than the industry-standard IP346 method. The latter method, widely used by the industry, since it correlates with biological carcinogenicity tests, grossly over-estimates PAH levels in oils since it is a non-specific gravimetric solvent extraction approach. The assay was found to be unaffected by the extract sample matrix and was capable of determining PAHs at the nanogram per millilitre level. The assay protocol was simple, low-cost and rapid (<2 h) and equally amenable to operation at remote sites or high-throughput sample screening. The binding specificity of the total anti-PAH antibody was examined by preparing and loading an anti-PAH immunosorbent with oil, prior to solvent displacement of antibody-bound compounds and by gas chromatography (GC)–mass spectrometry (MS) analysis.