Isotope effect of potassium in an aqueous/amalgam system

The isotope fractionation of potassium in an aqueous (KOH)/amalgam system has been studied. Two types of isotope effects with opposite isotope enrichment directions were observed in the electrolysis of potassium from the aqueous into the amalgam phase under constant electrolytic potentials. It was found that the first isotope effect causing the light isotope enriched in the amalgam is related to the kinetic process of the mass transfer through the aqueous/amalgam interface, while the second one leading to the enrichment of the heavy isotope in the amalgam phase is produced by the isotope-exchange equilibrium. The temperature dependence of the equilibrium isotope effect was also investigated using single-stage and multi-stage techniques. It was observed that the equilibrium isotope effect increases as the temperature increases in the range of 293-371 K. An empirical equation was used to fit the variations of the isotope effects with temperature for potassium together with the other alkaline and alkaline earth metals studied in the same system. The origin of the equilibrium isotope fractionation in the electron-exchange system was discussed. Furthermore, the mass dependence of the separation coefficients of the alkaline and alkaline earth metals observed in aqueous/amalgam and ion-exchange systems were compared. At 293 K the equilibrium isotope separation coefficient for the ³⁹K/⁴¹K isotopes in the amalgam system was determined as (5.6±0.6).10^-3.     

Isotope fractionation of iron(III) in chemical exchange reactions using solvent extraction with crown ether

This work reports on the chemical isotope fractionation of Fe(III) by a solvent extraction method with a crown ether of dicyclohexano-18-crown-6. The (56)Fe/(54)Fe and (57)Fe/(54)Fe ratios were analyzed by multiple-collector inductively coupled plasma mass spectrometry. We determined the dependence of the isotope enrichment factors (epsilon) on the strength of HCl. The relative deviation of the (56)Fe/(54)Fe ratios relative to the unprocessed material (10(4) epsilon(56)) increases from -15.3 to -6.3 with [HCl] increasing from 1.6 to 3.5 mol/L. Likewise, 10(4) epsilon(57) increases from -22.8 to -9.6 under the same conditions. The correlation between epsilon(56) and epsilon(57) is mass dependent within the errors. The observed fractionation was broken down into the effects of competing extraction reactions and of a reaction between Fe(III) species (FeCl(2)(+) and FeCl(3)) in the aqueous phase. We found that the isotope fractionation between the Fe(III) species is mass dependent, which we confirmed by calculating the reduced partition function ratios.     

Quantitation in gradient high performance liquid chromatography/inductively coupled mass spectrometry investigated using diclofenac and chlorpromazine

The use of directly coupled high performance liquid chromatography/inductively coupled plasma mass spectroscopy (HPLC/ICPMS) employing chlorine ((35)Cl/(37)Cl) detection has been investigated with respect to the detection and quantitation of the drugs diclofenac and chlorpromazine. By integration of peak areas in the 'chloratogram' (the chlorine specific HPLC chromatogram), a calibration curve was constructed, from which the concentrations could be determined. Chlorine detected HPLC/ICPMS is quantitative over a wide range of concentrations of pharmaceutical relevance for metabolite detection and the results reproducible (standard deviation +/- 0.43%) over multiple injections. Application of gradient chromatography and variation in the bulk mobile phase physicochemical properties has little effect on the ICPMS detection response for these compounds. This work indicates that the use of HPLC/ICPMS is likely to be quantitatively reliable for metabolism studies for a range of chlorinated xenobiotics.     

Chlorine isotope fractionation of a semi-volatile organochlorine compound during preparative megabore-column capillary gas chromatography

Chlorine isotope fractionation during preparative capillary gas chromatography (pcGC) was investigated using 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) as a model compound for semi-volatile organochlorine (OCl) molecules. Chlorine isotope analysis by thermal ionization mass spectrometry revealed no significant alteration of the chlorine isotope composition when the whole peaks were collected in pcGC (delta37Cl -3.2 per thousand versus -3.6 per thousand for the unprocessed DDT, +/-0.5 per thousand SD). However, distinct isotope fractionations were measured for the front (delta37Cl -5.1 per thousand) and tail (delta37Cl -1.8 per thousand) segments of partially collected samples. Isolation of individual OCls by pcGC enables accurate off-line chlorine isotope analysis, and thus facilitates the investigation of naturally occurring OCls.     

Primary and secondary kinetic isotope effects in proton (H(+)/D(+)) and chloronium ion ((35)Cl(+)/(37)Cl(+)) affinities.

The Cooks' kinetic method and tandem-in-space pentaquadrupole QqQqQ mass spectrometry were used to measure primary and secondary kinetic isotope effects (KIEs) in H(+) and Cl(+) (X(+)) affinity for a series of A/A(') isotopomeric pairs. Gaseous, isotopomeric, and loosely bound dimers [A...X(+)...A(')] were formed in combinations in which X = H(+), D(+), (35)Cl(+) or (37)Cl(+) and A/A(') = acetonitrile/acetonitrile - d(3), acetonitrile/acetonitrile-(15)N, acetonitrile-d(3)/acetonitrile-(15)N, acetone/acetone-d(6), acetone/acetone-(18)O, acetone-d(6)/acetone-(18)O, pyridine/pyridine-d(5), pyridine/pyridine-(15)N, pyridine-d(5)/pyridine-(15)N, or 3-((35)Cl)chloropyridine/3-((37)Cl)chloropyridine. Under nearly the same experimental conditions, the dimers were mass-selected and then dissociated by low-energy collisions with argon, yielding AX(+) and A(')X(+) as the fragment ions. KIEs were measured from the changes in ion affinities of the neutrals (DeltaX(+)) as estimated by the AX(+)/A(')X(+) abundance ratios. Using [A...H(+)(D(+))...A(')] and [A...(35)Cl(+)((37)Cl(+))...A(')] dimers and by comparing their extent of dissociation under nearly identical collision-induced dissociation conditions, the kinetic method was also applied, for the first time, to measure primary KIEs of the central ion as well as their influence on secondary KIEs. Becke3LYP/6-311++G(2df,2p) calculations were found to provide Delta(DeltaZPE)s for the competitive dissociation reactions that accurately predict the nature (normal or inverse) of the measured KIEs.     

A thermodynamic study to evidence the alpha,omega-dichloroalkane/ block copolymer mixed aggregates formation: effect of the copolymer architecture

The thermodynamics of alpha,omega-dichloroalkanes in aqueous solutions of (ethylene oxide)(11)(propylene oxide)(16)(ethylene oxide)(11) (L35) and (propylene oxide)(8)(ethylene oxide)(23)(propylene oxide)(8) (10R5) was determined at 298 and 305 K. Modeling the experimental data allowed to calculate the standard free energy (DeltaG(D)(o)/w) and the volume (DeltaV(D)/w) for the additive-copolymer mixed aggregates formation per additive molecule. DeltaG(D)(o)/w for Cl(2)CH(2) and Cl(2)(CH(2))(2) evidenced that the process is controlled by the forces exercising between the chlorine atoms and the OH groups of the copolymer micelles protruded into the aqueous phase. Cl(2)(CH(2))(3) experiences both the hydrophilic and hydrophobic domains into the aggregates. The hydrophobic interactions are more significant in 10R5 whereas the hydrophilic ones are more significant in L35. Temperature increase does not influence DeltaG(D)(o)/w in 10R5, whereas, it does influence DeltaG(D)(o)/w in L35, enhancing the ability of the aggregate to extract the chlorinated compounds from the aqueous phase. The DeltaV(D)/w values are consistent with the free energy results. These insights agree with those predicted by the Flory liquid lattice theory. The calculations extended to several alpha,omega-dichloroalkanes showed that Cl(2)CH(2) and Cl(2)(CH(2))(2) prefer poly(ethylene oxide) (PEO), Cl(2)(CH(2))(3) exhibits the same affinity for both PEO and poly(propylene oxide) (PPO), whereas the more hydrophobic additives show a preference for PPO. The copolymer architecture plays a relevant role in the alpha,omega-dichloroalkane solubilization into the polymeric aggregates.     

Nuclear field shift effect in isotope fractionation of thallium

Environmental transport of Tl is affected by redox reaction between Tl(I) and Tl(III) and ligand exchange reactions of them. In order to deepen the knowledge of Tl chemistry, we investigated fractionation of Tl stable isotopes (²⁰³Tl and ²⁰⁵Tl) in a chemical exchange system. Tl isotopes were fractionated in a liquid–liquid extraction system, in which aqueous and organic phases are hydrochloric acid solution and dichloroethane including a crown ether, respectively. After purification by ion-exchange chemistry, the isotope ratio of ²⁰⁵Tl/²⁰³Tl in equilibrated aqueous phase was measured precisely by multiple-collector–inductively-coupled-plasma–mass-spectrometry. A large isotope fractionation >1 ‰ was found. Electronic structures of possible Tl species (hydrated Tl⁺, Tl³⁺, and Tl chlorides) were calculated by ab initio methods, and the isotope fractionation factor was theoretically obtained. The isotope fractionation via intramolecular vibrations was calculated to be much smaller than the experimental result. The isotope fractionation via isotopic change in nuclear volume, named the nuclear field shift effect, was calculated to be >1 ‰ in Tl(I)–Tl(III) redox systems and/or ligand exchange systems of Tl(III). The nuclear field shift effect was found to be the major origin of Tl isotope fractionation.     

Emission of M2X+ cluster ions in thermal ionization mass spectrometry in the presence of graphite.

The emission of M2X+ cluster ions in thermal ionization mass spectrometry when graphite is loaded on the heating filaments was studied. The emission model of non-reductive thermal ionization of graphite was preliminarily discussed and factors influencing the thermal emission of M2X+ ions were investigated. The results show that the intensities of M2X+ cluster ions are related to ionic radius and crystal lattice energy, and possibly also to the solvation energies of ions. The intensities of M2Cl+ (M stands for K, Rb, and Cs) cluster ions, the M2Cl+/M+ ratios, and the 37Cl/35Cl ratios determined from M2Cl+ ion measurement usually increase with measurement time. The variation of the 37Cl/35Cl ratios determined from Cs2Cl+ ion measurement is lower than those based on K2Cl+ and Rb2Cl+ ion measurement, indicating the lowest isotopic fractionation.     

A chlorine isotope effect for enzyme-catalyzed chlorination

Several chlorinated organic compounds (COCs) that have been detected in a wide range of human, animal, and environmental samples may be derived from natural or anthropogenic sources. To determine whether the Cl isotope ratios of these compounds could be used to differentiate sources, we investigated the chlorine isotope effect for enzyme-catalyzed chlorination. Two aromatic substrates, 1,3,5-trimethylbenzene (TMB) and 3,5-dimethylphenol (DMP), were treated with a chloroperoxidase isolated from the fungus Caldariomyces fumago. A kinetic isotope effect (KIE) (in terms of k35/k37) was calculated to be 1.012 for TMB and 1.011 for DMP. A similar reaction, but not catalyzed, with hypochlorite yielded a much smaller KIE. These results indicate that a substantial KIE exists for this process. Furthermore, natural COCs synthesized by this enzymatic pathway may have Cl isotope ratios that will be easily distinguished from anthropogenic COCs.     

On the Cl···N halogen bond: a rotational study of CF3Cl···NH3

The rotational spectra of six isotopologues (CF(3)(35)Cl···(14)NH(3), CF(3)(37)Cl···(14)NH(3), CF(3)(35)Cl···(15)NH(3), CF(3)(37)Cl···(15)NH(3), CF(3)(35)Cl···(14)ND(3) and CF(3)(37)Cl···(14)ND(3)) of the CF(3)Cl···NH(3) adduct have been investigated and analyzed by pulsed jet Fourier transform microwave spectroscopy. Rotational, centrifugal distortion and quadrupole ((35)Cl, (37)Cl, (14)N) coupling constants have been precisely obtained. The two subunits of the complex are held together via a Cl···N halogen bond interaction. Information on the internal dynamics and on the dissociation energy of the complex is provided.     

Certification of the chlorine content of the isotopic reference materials IRMM-641 and IRMM-642

The Slovak Institute of Metrology and the Institute for Reference Materials and Measurements have collaborated in the certification of the two chlorine reference materials IRMM-641 and IRMM-642. Until now no isotopically enriched chlorine isotopic reference material certified for isotopic composition and content has been available commercially. The isotopic reference materials IRMM-641 and IRMM-642 described herein are certified for isotopic composition and for chlorine content. The chlorine content of the reference material IRMM-641 was certified by use of high-precision argentometric coulometric titration at the Slovak Institute of Metrology. The base material used for IRMM-641 is NIST Standard Reference Material 975. The chlorine content of the reference material IRMM-642 was measured by isotope dilution, using negative thermal ionization mass spectrometry at the Institute for Reference Materials and Measurements. Both standard reference materials were prepared by dissolving NaCl in water. The reference material IRMM-641 contains 0.025022 +/- 0.00011 mol kg(-1) chlorine of natural isotopic composition with an n(37Cl)/n(35Cl) ratio of 0.31977 +/- 0.00082. The reference material IRMM-642 contains 0.004458 +/- 0.000028 mol kg(-1) chlorine with an n(37Cl)/n(35Cl) ratio of 0.01914 +/- 0.00088.     

Hydrogen bonds in ionic liquids revisited: (35/37)Cl NMR studies of deuterium isotope effects in 1-n-butyl-3-methylimidazolium chloride

Detailed knowledge of the structure, dynamics, and interionic interactions of ionic liquids (ILs) is critical to understand their physicochemical properties. In this letter, we show that deuterium isotope effects on the chloride ion 35/37Cl NMR signal represent a useful tool in the study of interionic hydrogen bonds in imidazolium chloride ILs. Sizable Delta35/37Cl(H,D) values obtained for the model system 1-n-butyl-3-methylimidazolium chloride ([C4mim]Cl) upon deuteriation of the imidazolium C-2 and C-2,4,5 positions, of nearly 1 and 2 ppm, respectively, show that the approach can readily identify and differentiate Cl...H hydrogen bonds between the anion and cation. Our study is one of a few examples in which hydrogen-bonding in ILs has been investigated using deuterium isotope effects and, to our knowledge, the only one employing 35/37Cl NMR to detect these interactions. The methodology described could be easily extended to the study of other systems bearing NMR-active nuclei.     

水体中痕量挥发性有机物单体碳同位素组成分析

将固相微萃取(SPME)技术与冷阱富集系统相结合,对水体中痕量挥发性有机物进行了单体碳同位素分析,方法检测限较常规SPME提高了一个数量级。在优化的条件下,对20 μg/L的三氯乙烯/四氯乙烯和10 μg/L的苯/甲苯水溶液进行了单体碳同位素分析,相比于纯溶剂(液相)碳同位素值,顶空(气相)同位素分析误差不超过0.5‰,而样本标准偏差为0.3‰。对某受四氯乙烯污染的北京地下水进行了同位素测定,近污染源点(B408)与远污染源点(B230)四氯乙烯的碳同位素值(δ13C)分别为 -37.8‰和-34.45‰     

Detection of hexamethonium-perchlorate association complexes using NACE-MS

Perchlorate (ClO(4) (+)) and other chlorine oxide anions were observed to complex weakly with hexamethonium (1,6-bis-(trimethylammonium)-hexane) in both aqueous and polar nonaqueous solvents. The resultant positively charged complexes were resolved by NACE using 2-propanol/acetone electrolytes prior to mass spectrometric detection using an Agilent(3D)CE system coupled to a Bruker Esquire 3000+ quadrupole IT mass detector. Using electrokinetic injection, the method detection limit for perchlorate in nonaqueous media was 10 microg/L. The isotope patterns due to the presence of (35)Cl and (37)Cl in complex mass spectra allowed for unambiguous identification of perchlorate, chlorate (ClO(3) (+)), chlorite (ClO(2) (+)), and chloride (Cl(+)) in photoreaction samples.     

A new concept for isotope ratio monitoring liquid chromatography/mass spectrometry

A new interface for the on-line coupling of a liquid chromatograph to a stable isotope ratio mass spectrometer has been developed and tested. The interface is usable for (13)C/(12)C determination of organic compounds, allowing measurement of small changes in (13)C abundance in individual analyte species. All of the carbon in each analyte is quantitatively converted into CO(2) while the analyte is still dissolved in the aqueous liquid phase. This is accomplished by an oxidizing agent such as ammonium peroxodisulfate. The CO(2) is separated from the liquid phase and transferred to the mass spectrometer. It is shown that the whole integrated process does not introduce isotope fractionation. The measured carbon isotope ratios are accurate and reproducible. The sensitivity of the complete system allows isotope ratio determination down to 400 ng of compound on-column. By-passing the high-performance liquid chromatography (HPLC) separation allows bulk isotopic analysis with substantially lower sample amounts than those required by conventional elemental analyzers. The results of the first applications to amino acids, carbohydrates, and drugs, eluted from various types of HPLC columns, are presented. The wide range of chromatographic methods enables the analysis of compounds never before amenable to isotope ratio mass spectrometry techniques and may lead to the development of many new assays.     

电解质水溶液在丙酸十二铵-四氯化碳溶液中的增溶

表面活性剂在非极性溶剂中形成的反胶束在催化反应、光化学、蛋白质苹取分离等方面有着广泛的应用问．这些应用与反胶束的性质有着密切的关系，而增溶水后的反胶束其形状和大小都会发生很大的变化．增溶不同水量的反胶束的微极性、酸碱性、微勤度等已有不少文献报导［2－5］．一些不溶于非极性溶剂而溶于水的物质可以溶解在非极性溶剂中的反胶束核心水团中，这个现象被称为二次增溶．其中，电解质的二次增溶对于研究配体转换反应。酶催化反应问及改变反胶束内部的微环境有着十分重要的作用，Aebi和Weibush回首先研究了有水存在时N。CI在A…     

反渗透膜UTC-70在水溶液中的介电谱及其解析

根据平面层状体系介电弛豫理论研究了反渗透膜UTC-70在各种浓度氯化钠和氯化钾溶液中的介电弛豫行为.利用计算机拟合的方法得到膜/溶液体系的介电参数,并由此计算得到了UTC-70膜相和水溶液相的相参数,获得了反映反渗透膜UTC-70荷电情况的信息及其与电解质溶液浓度的关系,介电解析的结果解释了介电弛豫的产生机制.     

Optical control of ground-state atomic orbital alignment: Cl(2P3/2) atoms from HCl(v=2,J=1) photodissociation

H(35)Cl(v=0,J=0) molecules in a supersonic expansion were excited to the H(35)Cl(v=2,J=1,M=0) state with linearly polarized laser pulses at about 1.7 microm. These rotationally aligned J=1 molecules were then selectively photodissociated with a linearly polarized laser pulse at 220 nm after a time delay, and the velocity-dependent alignment of the (35)Cl((2)P(32)) photofragments was measured using 2+1 REMPI and time-of-flight mass spectrometry. The (35)Cl((2)P(32)) atoms are aligned by two mechanisms: (1) the time-dependent transfer of rotational polarization of the H(35)Cl(v=2,J=1,M=0) molecule to the (35)Cl((2)P(32)) nuclear spin [which is conserved during the photodissociation and thus contributes to the total (35)Cl((2)P(32)) photofragment atomic polarization] and (2) the alignment of the (35)Cl((2)P(32)) electronic polarization resulting from the photoexcitation and dissociation process. The total alignment of the (35)Cl((2)P(32)) photofragments from these two mechanisms was found to vary as a function of time delay between the excitation and the photolysis laser pulses, in agreement with theoretical predictions. We show that the alignment of the ground-state (35)Cl((2)P(32)) atoms, with respect to the photodissociation recoil direction, can be controlled optically. Potential applications include the study of alignment-dependent collision effects.     

Temperature dependence of fractionation of hydrogen isotopes in aqueous sodium chloride solutions

The D/H ratios of hydrogen gas in equilibrium with aqueous sodium chloride solutions of 2, 4 and 6 molalities were determined within the range 10 to 95°C, using a hydrophobic platinum catalyst. With each of the different sodium chloride concentrations, the hydrogen isotope effect between the solution and pure water changes linearly with the square of the reciprocal temperature. On the basis of the results for hydrogen isotope fractionation observed in this study, and those of hydrogen isotope fractionation between pure water and vapor, it is concluded that the structure of the aqueous sodium chloride solution does not change significantly with temperature. The hydrogen isotope effect is evidently different from the results of vapor pressure isotope effects (VPIE) on sodium chloride solutions measured on separated isotopes. The difference between the present work and the VPIE studies is probably due to a non-ideal behavior in a mixture of isotopic water molecules and/or to a H₂O-D₂O disproportionation reaction in sodium chloride solutions. The distinction between the latter two mechanisms can not be differentiated at present.     

Aqueous biphasic systems formed by nonionic polymers I. Effects of inorganic salts on phase separation

The effect of salts KSCN, KI, KBr, KCl, KClO₄, KF, K₂SO₄ and NH₄Cl, LiCl, NaCl, KCl, CsCl on the binodials of the phase diagrams for aqueous biphasic dextranpolyvinylpyrrolidone, dextran-polyvinyl alcohol, dextran-ficoll and dextran-polyethylene glycol systems was studied. It is established that the K-salts present at the concentrations of 0.1 and 0.5 mol/kg alter the binodials of the phase diagrams for the above systems. The effect of a salt is found to be related to the lyotropy of the salt quantified by the salt molal surface tension increment. It is assumed that phase separation in an aqueous polymer biphasic system is affected by the presence of a salt mainly due to the effect of the salt on the structure and/or state of water in the system.