Theoretical investigation of the kinetics for the hydrogen abstraction reaction of 1,1,1,2-tetrafluoroethane (HFC-134a) by chlorine radical

The hydrogen abstraction reaction of 1,1,1,2-tetrafluoroethane (HFC-134a) by chlorine radical is investigated by theoretical calculations. Equilibrium geometries and harmonic vibrational frequencies of the reactants, transition state, and products are calculated using high-level ab initio methods. Rate constants of forward and backward reactions for the temperatures from 200 to 1000 K are calculated using classical transition state theory with Eckart tunneling correction, fitted in the expressions k_f (T) = 1.19 × 10⁻²³T^3.93exp (−1110/T), and k_b (T) = 8.86 × 10⁻²⁴T^3.32exp (−959/T) cm³ molecule⁻¹ s⁻¹ for forward and backward reactions, respectively, and are in reasonable agreement with the available experimental values.     

Characteristics and formation of [AlO4Al12(OH)24(H2O)12]7+ in electrolysis process

[AlO₄Al₁₂(OH)₂₄(H₂O)₁₂]⁷⁺ (Al₁₃) formation in electrolysis process is studied. The results detected by²⁷Al NMR spectroscopy show that high content of Al₁₃ polymer is formed in the partially hydrolyzed aluminum solution prepared by controlled electrolysis process. In the produced electrolyte of total Al concentration ([Al_T]) 2.0 mol · L⁻¹ with a basicity (B = OH/Al molar ratios) of 2.0, the content of Al₁₃ polymer is over 60% of total Al. Dynamic light scattering shows that the size distribution of the final electrolyte solutions ([Al_T] = 2.0 mol · L⁻¹) is trimodal with B = 2.0 and bimodal with B = 2.5. The aggregates of Al₁₃ complexes increase the particle size of partially hydrolyzed aluminum solution.     

Crystal growth and magnetic behavior of R6T13−xAlxMy phases (R=La, Nd; T=Mn, Fe; M=main group) grown from lanthanide-rich eutectic fluxes

Binary eutectic mixtures of early lanthanide metals and late transition metals have been explored as media for crystal growth of new intermetallic phases. A large family of R₆T_13−xAl_xM_y phases (R=La or Nd; T=Fe or Mn; M=main group elements) with the La₆Co₁₁Ga₃ structure type can be crystallized from La/Ni and Nd/Fe eutectics. The tetragonal structure of these compounds features slabs of transition metal atoms capped with mixed T/Al sites and separated by layers of lanthanide ions. The growth of large crystals of the lanthanum analogs allows for the study of the anisotropic magnetic properties of the transition metal slabs. For La₆Fe_13−xAl_xM_y analogs, these order antiferromagnetically with T_N strongly dependent on the Fe/Al ratio on the mixed sites. Growth of Mn analogs is reported for the first time; the transition metal slabs in La₆(Mn/Ni)₁₀Al₃ phases order ferromagnetically with a T_C of 200 K.     

RbAuUSe3, CsAuUSe3, RbAuUTe3, and CsAuUTe3: Syntheses and structure; magnetic properties of RbAuUSe3

The compounds RbAuUSe₃, CsAuUSe₃, and RbAuUTe₃ were synthesized at 1073 K from the reactions of U, Au, Q, and A₂Q₃ (A=Rb or Cs; Q=Se or Te). The compound CsAuUTe₃ was synthesized at 1173 K from the reaction of U, Au, Te, and CsCl as a flux. These isostructural compounds crystallize in the KCuZrS₃ structure type in space group Cmcm of the orthorhombic system. The structure consists of layers that contain nearly regular UQ₆ octahedra and distorted AuQ₄ tetrahedra. The infinite layers are separated by bicapped trigonal prismatic A cations. The magnetic behavior of RbAuUSe₃ deviates significantly from Curie–Weiss behavior at low temperatures. For T>200 K, the values of the Curie constant C and the Weiss constant θ_p are 1.82(9) emu K mol⁻¹ and −3.5(2)×10² K, respectively. The effective magnetic moment μ_eff is 3.81(9) μ_B. Formal oxidation states of A/Au/U/Q may be assigned as +1/+1/+4/−2, respectively.     

Single bubble growth during water electrolysis under microgravity

Single bubble evolution on a micro-electrode (Pt, φ = 0.2 mm) was observed in 0.36 M KOH solution under terrestrial (1-G) and microgravity (μ-G) environments. The bubble size during galvanostatic electrolysis (j = −2.6 × 10³ A m⁻²) was measured by CCD images, which allowed us to calculate the gas evolution efficiency, f_G, by comparison with the consumed charge. The efficiency under μ-G increased until 1 s after starting electrolysis and then reached constant value (f_G = 0.85), while, under 1-G, it showed a lower value and remarkably decreased 2 s after the beginning of the measurement. Such differences between μ-G and 1-G were explained by the mass transfer rate of the dissolved gas. Bubble-induced microconvection dominated the mass transfer under μ-G without any buoyancy force, on the other hand, the single-phase free convection (microscopic natural convection) influenced the bubble growth under 1-G.     

Sub- and post-micellar catalytic and inhibitory effects of cetlytrimethylammonium bromide in the permanganate oxidation of phenylalanine

The kinetics of phenylalanine (phe) oxidation by permanganate has been investigated in absence and presence of cetlytrimethylammonium bromide (CTAB) using conventional spectrophotometric technique. The rate shows first- and fractional-order dependence on [MnO₄⁻] and [phe] in presence of CTAB. At lower values of [CTAB] (≤10.0 × 10⁻⁴ mol dm⁻³), the catalytic ability of CTAB aggregates are strong. In contrast, at higher values of [CTAB] (≥10.0 × 10⁻⁴ mol dm⁻³), the inhibitory effect was observed in absence of H₂SO₄. We find that anions (Br⁻, Cl⁻ and NO₃⁻) in the form of sodium salts are strong inhibitors for the CTAB catalyzed oxidation. Kinetic and spectrophotometric evidences for the formation of an intermediate complex and an ion-pair complex between phe and MnO₄⁻, CTAB and MnO₄⁻, respectively, are presented. A mechanism consistent with kinetic results has been discussed. Complex formation constant (K_c) and micellar binding constant (K_s) were calculated at 30 °C and found to be K_c = 319 mol⁻¹ dm⁻³ and K_s = 1127 mol⁻¹ dm⁻³, respectively.     

A new generation of cyanide ion-selective membranes for flow injection application: Part III. A simple approach to the determination of toxic metal-cyanide complexes without preliminary separation

A new flow injection approach to total weak acid-dissociable (WAD) metal–cyanide complexes is proposed, which eliminates the need of a separation step (such as gas diffusion or pervaporation) prior to the detection. The cornerstone of the new methodology is based on the highly selective flow-injection potentiometric detection (FIPD) system that makes use of thin-layer electroplated silver chalcogenide ion-selective membranes of non-trivial composition and surface morphology: Ag_2 + δSe_1 − xTe_x and Ag_2 + δSe. An inherent feature of the FIP-detectors is their specific response to the sum of simple CN⁻ + Zn(CN)₄²⁻ + Cd(CN)₄²⁻. For total WAD cyanide determination, ligand exchange (LE) and a newly developed electrochemical pre-treatment procedure for release of the bound cyanide were used. The LE pre-treatment ensures complete recovery only when the sample does not contain Hg(CN)₄²⁻. This limitation is overcome by implementing electrochemical pre-treatment which liberates completely the bound WAD cyanide through cathodic reduction of the complexed metal ions. A complete recovery of toxic WAD cyanide is achieved in the concentration range from 156 μg L⁻¹ up to 13 mg L⁻¹. A three-step protocol for individual and group WAD cyanide speciation is proposed for the first time. The speciation protocol comprises three successive measurements: (i) of non-treated, (ii) LE-exchange pre-treated; (iii) electrochemically pre-treated sample. In the presence of all WAD complexes this procedure provides complete recovery of the total bound cyanide along with its quantitative differentiation into the following groups: (1) Hg(CN)₄²⁻; (2) CN⁻ + Cd(CN)₄²⁻ + Zn(CN)₄²⁻; (3) Cu(CN)₄³⁻ + Ni(CN)₄²⁻ + Ag(CN)₂⁻. The presence of a 100-fold excess in total of the following ions: CO₃²⁻, SCN⁻, NH₄⁺, SO₄²⁻ and Cl⁻ does not interferes. Thus the proposed approach offers a step ahead to meeting the ever increasing demand for cyanide-species-specific methods. The equipment simplicity makes the procedure a good candidate for implementing in portable devices for in-field cyanide monitoring.     

Analysis of thermo-magnetic fluctuations above the glass-transition temperature in Bi1.6Pb0.5Sr2−xEuxCa1.1Cu2.1O8+δ (0.000 ≤ x ≤ 0.180) system

The resistivity of Bi_1.6Pb_0.5Sr_2−xEu_xCa_1.1Cu_2.1O_8+δ (0.000 ≤ x ≤ 0.180) superconductor has been measured as a function of temperature and magnetic field. The resistivity shows a glassy behavior even at higher temperatures and magnetic fields for the Eu-doped samples as compared with the Eu free sample. The values of glass-transition temperature [T_g], magnetic field dependent activation energy [U₀(B)] and the temperature and magnetic field dependent activation energy [U₀(B,T)] are found to be maximum for optimal doping levels (x = 0.135) which shows that the flux lines are effectively pinned in this sample. Also for temperatures below the superconducting transition temperature (T_C), a scaling of measured resistivity curves in magnetic field (B = 0.4 and 0.8 T) is obtained and this scaling is quite useful for better understanding of the behavior of the flux vortices in high temperature superconductors.     

Mesoporous silica functionalized with diethylenetriamine moieties for metal removal and thermodynamics of cation–basic center interactions

The inorganic–organic hybrid material was synthesized by co-condensation of tetraethylorthosilicate and the organosilane N-[3-(trimethoxysilyl)propyl]diethylenetriamine. Spectroscopic analysis of the hybrid material by FTIR showed bands at 2937 and 2839 cm⁻¹ related to ν(CH); ²⁹Si NMR spectrum gave signals at −108, −99, −68 and −59 ppm, Q⁴, Q³, T⁴ and T² species related to the silica backbone structure. The well-defined peaks obtained in the ¹³C NMR spectrum in the 10–58 ppm region confirmed the attachment of organic functional groups as pendant chains bonded into the porous silica. Particle morphology evaluated by a scanning electron microscopic (SEM) study showed the formation of spherical particles in the nanometer range. The X-ray diffraction pattern showed a peak at a 2θ of 2.3°, demonstrating the mesoporous characteristic of the synthesized material. Adsorption evaluated by batch equilibrium processes gave the maximum adsorption of 2.2 and 2.8 mmol g⁻¹ for copper and nickel, respectively. From these values a stoichiometry of 2:1 for cation/ligand was established, considering the amount of 1.2 mmol of pendant groups per gram of the hybrid material. Thermodynamic parameters related to the adsorption of metal ions, evaluated using the calorimetric titration technique presented a negative Gibbs free energy value, in agreement with the spontaneity of cation removal on the basic center in the mesoporous silica at the solid/liquid interface.     

Uncompensated magnetization in the layered molecular antiferromagnet {N(n-C5H11)4[MnFe(ox)3]}∞

Studies on the magnetic properties of the molecular antiferromagnetic material {N(n-C₅H₁₁)₄[Mn^IIFe^III(ox)₃]}_∞, carried out by various physical techniques (AC/DC magnetic susceptibility, magnetization, heat capacity measurements and Mössbauer spectroscopy) at low temperatures, have been presented. Different experimental observations complement each other and provide a clue for the observation of an uncompensated magnetization below the Néel temperature and short-range correlations persisting high above T_N. It is understood that the honeycomb layered structure of the compound contains non-equivalent magnetic sub-lattices, (Mn^II–ox–Fe^III_A–...) and (Mn^II–ox–Fe^III_B–...), where different responses of the Fe^III_A and Fe^III_B spin sites towards an external magnetic field might be responsible for the observation of the uncompensated magnetization in this compound at T < T_N. The present magnetic system is an S = 5/2 2-D Heisenberg antiferromagnet system with the intralayer exchange parameter J/k_B = −3.29 K. A very weak interlayer exchange interaction was anticipated from the spin wave modeling of the magnetic heat capacity for T < 0.5T_N. The positive sign of the coupling between the layers has been concluded from the Mössbauer spectrum in the applied magnetic field. Frustration in the magnetic interactions gives rise to the uncompensated magnetic moment in this compound at low temperatures.     

Real-time monitoring of metal deposition and segregation phenomena during preparation of PdCu membranes

The N₂ and H₂ evolution, respectively, were monitored during deposition of Pd and Cu from electroless plating baths to obtain in-process control of the composition during preparation of 3–7 μm thick PdCu membranes on tubular ceramic substrates. Compositions estimated by gas evolution compare favorably to those measured in post-mortem XRD and EDS analyses, mostly differing by not more than 1 at.%. This result suggests that use of gas evolution measurements to enable in-process control of composition to within 1 at.% is feasible. Annealing experiments in an H₂ atmosphere demonstrated that, at 893 K, only 48 h are needed to form a stoichiometrically homogeneous, 9.5 μm thick, face centered cubic (fcc) Pd₆₃Cu₃₇ membrane from sequentially deposited layers; at 723 K, the same transformation requires over 2 weeks. The appearance of transient body centered cubic (bcc) and fcc phases with lower Pd contents signaled compositional segregation in the initial stages of alloy formation at 723 and 773 K and could be a source of persistent stoichiometric heterogeneity particularly in bcc PdCu membranes. The H₂ fluxes of fcc Pd₅₈Cu₄₂ and Pd₇₀Cu₃₀ membranes were J_H2=(1.6±1.1) mol m⁻² s⁻¹ exp[(−24.8±0.4)kJ mol⁻¹/RT] and J_H2=(3.7±0.6) mol m⁻² s⁻¹ exp[(−21.3±1.0)kJ mol⁻¹/RT], respectively, at 100 kPa H₂ pressure difference.     

Use of a graphite–polyurethane composite electrode for electroanalytical determination of indole-3-acetic acid in soil samples

A new electroanalytical methodology was developed for the quantification of the phytohormone indole-3-acetic acid (IAA), using a graphite–polyurethane composite electrode (GPU) and the square wave voltammetry (SWV), in 0.1 mol L^− 1 phosphoric acid solution (pH 1.6). Analytical curves were constructed under optimized conditions (f = 100 s^− 1, a = 50 mV, E_i = 5 mV) and the reached detection and quantification limits were 26 μg L^− 1 and 0.2 mg L^− 1, respectively. The developed methodology is simple and accurate for the routine determination of IAA. In order to verify the application of the electroanalytical methodology in fortified soil samples without previous treatment, an IAA assay was performed without serious interferences of the soil constituents.     

Kinetics of adsorption of Saccharomyces cerevisiae mandelated dehydrogenase on magnetic Fe3O4–chitosan nanoparticles

The adsorption of Saccharomyces cerevisiae mandelated dehydrogenase (SCMD) protein on the surface-modified magnetic nanoparticles coated with chitosan was studied in a batch adsorption system. Functionalization of surface-modified magnetic particles was performed by the covalent binding of chitosan onto the surface of magnetic Fe₃O₄ nanoparticles. Characterization of these particles was carried out using FTIR spectra, transmission electron micrography (TEM), X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). Magnetic measurement revealed that the magnetic Fe₃O₄–chitosan nanoparticles were superparamagnetic and the saturation magnetization was about 37.3 emu g⁻¹. The adsorption capacities and rates of SCMD protein onto the magnetic Fe₃O₄–chitosan nanoparticles were evaluated. The adsorption capacity was influenced by pH, and it reached a maximum value around pH 8.0. The adsorption capacity increased with the increase in temperature. The adsorption isothermal data could be well interpreted by the Freundlich isotherm model. The kinetic experimental data properly correlated with the first-order kinetic model, which indicated that the reaction is the adsorption control step. The apparent adsorption activation energy was 27.62 kJ mol⁻¹ and the first-order constant for SCMD protein was 0.01254 min⁻¹ at 293 K.     

Conductivity studies of dense yttrium-doped BaZrO3 sintered at 1325 °C

High-temperature proton conductors have wide applications in the areas of fuel cells, electrolysis and hydrogen separation. Barium zirconate-based materials are of interest due to their good stability and high protonic conductivity. The reported conductivity of these ceramic materials is generally less than 10⁻² S/cm, even at high temperatures. This is not high enough for an electrolyte-supported device to achieve an ASR of less than 0.2 Ω cm² therefore thin film electrolytes are required for successful application. As BaZrO₃-based materials have to be sintered at temperatures as high as 1700 °C, this makes it difficult to find a suitable supporting electrode which will not undergo significant chemical reaction with the BaZrO₃-based electrolyte during fabrication of the required electrode supported electrolyte. In this paper, proton-conducting BaZr_0.8Y_0.2O_2.9 was successfully sintered at 1325 °C with a relative density of 96% via addition of 1 wt% ZnO. Fabrication of electrochemical cells using proton-conducting BaZr_0.8Y_0.2O_2.9 as the electrolyte thus becomes possible. The formula of the 1 wt% ZnO added sample is Ba_0.97Zr_0.77Y_0.19Zn_0.04O_3−δ which exhibits a tetragonal structure with space group P4/mbm (127); a=5.9787(1) Å, c=4.2345(1) Å, V=151.36(1) Å³. It was found that a solid solution was formed for a limited range of Zn doping. Conductivity has been studied as a function of atmosphere (air, dry and wet 5% H₂/Ar) with the changes in bulk and grain boundary on changing atmosphere being monitored as a function of time. The total conductivity of Ba_0.97Zr_0.77Y_0.19Zn_0.04O_3–δ is 1.0×10⁻³ S/cm above 600 °C therefore it may be used as a proton-conducting thin film electrolyte for efficient electrochemical devices at such temperatures. The grain boundary resistance is insignificant at high temperature for the well-sintered sample.     

Reactions of CO2 with H, H2 and deuterated analogues

Combining a temperature variable 22-pole ion trap with a cold effusive beam of neutrals, rate coefficients k(T) have been measured for reactions of CO₂⁺ ions with H, H₂ and deuterated analogues. The neutral beam which is cooled in an accommodator to T_ACC, penetrates the trapped ion cloud with a well-characterized velocity distribution. The temperature of the ions, T_22PT, has been set to values between 15 and 300 K. Thermalization is accelerated by using helium buffer gas. For reference, some experiments have been performed with thermal target gas. For this purpose hydrogen is leaked directly into the box surrounding the trap. While collisions of CO₂⁺ with H₂ lead exclusively to the protonated product HCO₂⁺, collisions with H atoms form mainly HCO⁺. The electron transfer channel H⁺ + CO₂ could not be detected (<20%). Equivalent studies have been performed for deuterium. The rate coefficients for reactions with atoms are rather small. Within our relative errors of less than 15%, they do not depend on the temperature of the CO₂⁺ ions nor on the velocity of the atoms (k(T) lays between 4.5 and 4.7 × 10⁻¹⁰ cm³ s⁻¹ with H as target, and 2.2 × 10⁻¹⁰ cm³ s⁻¹ with D). For collisions with molecules, the reactivity increases significantly with falling temperature, reaching the Langevin values at 15 K. These results are reported as k = α (T/300 K)^β with α = 9.5 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.15 for H₂ and α = 4.9 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.30 for D₂.     

Heat of transformation of chains in amorphous sulphur

The heatQ of transformation of the chains in amorphous sulphur was measured calorimetrically. The mean value ¯Q for samples remelted atT _f=443 K increases from 31.5 to 45.9 J g^–1 in the measurement temperature range from 288 to 303 K.For samples remelted in theT _f range from 443 to 573 K, the ¯Q values are from 30.6 to 24.0 J g^–1.The results are discussed on the basis of the theory of nucleation and growth of nuclei.     

Recombination of HCO and DCO ions with electrons

Recombination of HCO⁺ and DCO⁺ ions with electrons was studied in afterglow plasma. The flowing afterglow with Langmuir probe (FALP) apparatus was used to measure the recombination rate coefficients and their temperature dependencies in the range 150–270 K. To obtain a recombination rate coefficient for a particular ion, the dependencies on partial pressures of gases used in the ion formation were measured. The variations of α_HCO⁺(T) and α_DCO⁺(T) seem to obey the power law: α_HCO⁺(T) = (2.0 ± 0.6) × 10⁻⁷ (T/300)^−1.3 cm³ s⁻¹ and α_DCO⁺(T) = (1.7 ± 0.5) × 10⁻⁷ (T/300)^−1.1 cm³ s⁻¹ over the studied temperature range.     

Mechanism and kinetics of crystallization of α-Fe in amorphous Fe81B13Si4C2 alloy

The non-isothermal crystallization of α-Fe from Fe₈₁B₁₃Si₄C₂ amorphous alloy was investigated. The kinetic parameters of crystallization process were determined by Kissinger and Kissinger–Akahira–Sunose (KAS) methods. It was established that the kinetic parameters of transformation do not change with the degree of crystallization in the range of 0.1–0.7. The kinetic model of the crystallization process was determined using the Malek's procedure. It was established that the primary crystallization α-Fe phase from amorphous alloy can be described by Šesták–Berggren autocatalytic model with kinetic triplet E_a = 349.4.0 kJ mol⁻¹, ln A = 50.76 and f(α) = α^0.72(1 − α)^1.02.     

Ion Selective Electrode Determination of Free Versus Total Fluoride Ion in Simple and Fluoroligand Coordinated Hexafluoropnictate (PnF<Subscript>6</Subscript><Superscript>−</Superscript>, Pn = P,As, Sb,Bi) Salts

Interpretation of the results of determinations of free fluoride (F_f⁻) and total fluoride (F_t⁻) obtained with fluoride ISE while conducting elemental chemical analysis of bulk material of newly synthesized inorganic fluoride compounds is of crucial importance for the purpose of determination of purity and stoichiometry of these compounds. Knowledge of the properties and behavior of these compounds in aqueous media is therefore essential. Observations are presented on the determinations of the amounts of F_t⁻ and F_f⁻ in fluorinated compounds, in the particular hexafluoropnictate salts (PnF₆⁻, Pn = P, As, Sb, Bi) as found in aqueous media and in some compounds with XeF₂, AsF₃ ligands. A critical look at the determined amounts of F_f⁻, F_t⁻and calculated amounts of bound fluoride (F_b⁻) is provided.     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.