Enhanced lasing properties of dissymmetric Eu(III) complex with bidentate phosphine ligands

The luminescent and lasing properties of Eu(III) complexes were enhanced by using an dissymmetric Eu(III) complex. The photophysical properties (the emission spectral shapes, the emission lifetimes, the emission quantum yields, and the stimulated emission cross section (SEC)) were found to be dependent on the geometrical structures of Eu(III) complexes. The geometrical structures of Eu(III) complexes were determined by X-ray single crystal analyses. The symmetrical group of Eu(hfa)3(BIPHEPO) (tris(hexafluoroacetylacetonato)europium(III) 1,1'-biphenyl-2,2'-diylbis(diphenylphosphine oxide)) was found to be C1, which was more dissymmetric than Eu(hfa)3(TPPO)2 (tris(hexafluoroacetylacetonato)europium(III) 1,2-phenylenebis(diphenylphosphine oxide): C2 symmetry) and Eu(hfa)3(OPPO)2 (tris(hexafluoroacetylacetonato)europium(III) 1,2-phenylenebis(diphenylphosphine oxide): C2 symmetry). The analytical data were supported by Judd-Ofelt analysis. The most dissymmetrical Eu(III) complex, Eu(hfa)3(BIPHEPO), showed large electron transition probability and large SEC (4.64 x 10(-20) cm2). The SEC of Eu(hfa)3(BIPHEPO) was superior to even the values of Nd-glass laser for practical use (1.6-4.5 x 10(-20) cm2). The lasing properties of Eu(III) complexes in polymer thin film were measured by photopumping of a Nd:YAG laser (355 nm). The threshold energy of lasing oscillation was found to be 0.05 mJ. The increasing rate of the lasing intensity of Eu(hfa)3(BIPHEPO) as a function of the excitation energy was much larger than that of Eu(hfa)3(TPPO)2 and Eu(hfa)3(OPPO)2. The dissymmetrical structure of Eu(hfa)3(BIPHEPO) promoted the enhancement of the lasing property.     

Multireference theoretical investigation on selectivity of the bond fissions in photodissociation of acetyl cyanide

The selectivity of the C-CH(3) and C-CN bond fissions upon excitation of acetyl cyanide at 193 nm has been investigated at the theoretical level of multistate complete active space self-consistent field second order perturbation. The calculated results indicated that the initially excited S(3) state relaxes to S(2) via ultrafast internal conversion. The S(2) state could dissociate via two pathways. One, adiabatically dissociates to CH(3)CO(X)+CN(A). The other one internally converts to S(1) before S(1) intersystem crossing to T(1). The T(1) state subsequently dissociates to two groups of products: CH(3)(X)+OCCN(X) and CH(3)CO(X)+CN(X). The experimentally observed preference branching of CN elimination over CH(3) one and bond selectivity are the results of the competition between the adiabatic and nonadiabatic dynamics of the S(2) state.     

Analysis of mixtures of hafnium and zirconium by the methylthymol blue-hydrogen peroxide method

The reaction of hydrogen peroxide with the zirconium(IV) and hafnium(IV) Methylthymol Blue complexes (MeMTB) has been investigated. The conditional stability constants of the Zr(IV) and Hf(IV) complexes with hydrogen peroxide [K'(Me(H(2)O(2)))] were determined spectrophotometrically. The K'(Me(H(2)O(2))) values found, which depend on the acidity, are 3.91 x 10(2) 3.24 x 10(2), 2.63 x 10(2) at [HCl] = 0.2, 0.3, 1.0M respectively for Me = Zr(IV) and 0.828, 0.523, 0.319 for Me = Hf(IV). The ratios of the conditional stability constants, K'(Me(H(2)O(2)))/ K'(MeMTB), are: 5.52 x 10(-4), 5.79 x 10(-4), 8.23 x 10(-4) for Me = Zr(IV) and 2.08 x 10(-6), 2.74 x 10(-6), 1.48 x 10 (-5) for Me = Hf(IV) at the three acidities. The maximum of the ratio of the relative conditional stability constants is obtained in 0.2M hydrochloric acid. The conditions which should be complied with for the determination of hafnium in the presence of zirconium are discussed. The results were compared with those obtained by the Xylenol Orange-hydrochloric acid method. They are superior for samples containing less than 20 mole% of hafnium in admixture with zirconium.     

Adsorption of metal ions onto Moroccan stevensite: kinetic and isotherm studies

The aim of this paper is to study the adsorption of the heavy metals (Cd(II), Cu(II), Mn(II), Pb(II), and Zn(II)) from aqueous solutions by a natural Moroccan stevensite called locally rhassoul. We carried out, first, a mineralogical and physicochemical characterization of stevensite. The surface area is 134 m2/g and the cation exchange capacity (CEC) is 76.5 meq/100 g. The chemical formula of stevensite is Si3.78Al0.22Mg2.92Fe0.09Na0.08K0.08O10(OH)2.4H2O. Adsorption tests of Cd(II), Cu(II), Mn(II), Pb(II), and Zn(II) in batch reactors were carried out at ambient temperature and at constant pH. Two simplified models including pseudo-first-order and pseudo-second- order were used to test the adsorption kinetics. The equilibrium time and adsorption rate of adsorption were determined. The increasing order of the adsorption rates follows the sequence Mn(II) > Pb(II) > Zn(II) > Cu(II) > Cd(II). The Dubinin-Radushkevich (D-R), Langmuir, and Redlich-Peterson (R-P) models were adopted to describe the adsorption isotherms. The maximal adsorption capacities at pH 4.0 determined from the D-R and Langmuir models vary in the following order: Cu(II) > Mn(II) > Cd(II) > Zn(II) > Pb(II). The equilibrium data fitted well with the three-parameter Redlich-Peterson model. The values of mean energy of adsorption show mainly an ion-exchange mechanism. Also, the influence of solution pH on the adsorption onto stevensite was studied in the pH range 1.5-7.0.     

Oxidation chemistry of uranium(III) complexes of Tpa: synthesis and structural studies of oxo,hydroxo, and alkoxo complexes of uranium(IV)

The crystal structure of the complex [U(tpa)(2)]I(3), 1 (tpa = tris[(2-pyridyl)methyl]amine), has been elucidated. The complex exists as only one enantiomer in the crystal leading to the chiral space group P2(1)2(1)2(1). The coordination geometry of the metal can be described as a distorted cube. Accidental oxidation of [U(tpa)(2)]I(3) led to the isolation of the unusual mononuclear bishydroxo complex of uranium(IV) [U(tpa)(2)(OH)(2)]I(2).3CH(3)CN, 2, which was structurally characterized. The controlled reaction of [U(tpa)(2)]I(3) with water resulted in the oxidation of the metal center and led to the formation of protonated tpa and of the trinuclear U(IV) oxo complex ([U(tpa)(mu-O)I](3)(mu(3)-I))I(2), 3. The solid state and solution structures of this trimer are reported. The pathway suggested for the formation of this complex is the oxidation of the [U(tpa)(2)]I(3) complex by H(2)O to form a U(IV) hydroxo complex which then decomposes, eliminating mono-protonated tpa. The comparison with the reported reaction with water of cyclopentadienyl derivatives points to a higher reactivity toward water reduction of the bis(tpa) complex with respect to the cyclopentadienyl derivatives. The reaction of U(III) with methanol in the presence of the supporting ligand tpa leads to formation of alkoxo complexes similarly to what is found for amide or cyclopentadienyl derivatives. The monomethoxide complex [U(tpa)I(3)(OMe)], 4, has been prepared in good yield by alcoholysis of the U(III) mono(tpa) complex. The crystal structure of this complex has been determined. The reaction of [U(tpa)(2)]I(3) with 2 equiv of methanol in acetonitrile allows the isolation of the bismethoxo complex of U(IV) [U(tpa)I(2)(OMe)(2)], 5, in 35-47% yield, which has been fully characterized. To account for the oxidation of U(III) to U(IV) the suggested mechanism assumes that hydrogen is evolved in both reactions.     

Application of a stepwise flow ratiometry without phase separation to the determination of the chloroform/water distribution coefficients of volatile diazines

The chloroform/water distribution coefficients (K(D)) of sixteen diazine compounds were determined by a stepwise flow ratiometry. An aqueous solution of analyte was delivered and merged with chloroform. The flow rate ratio of both the phases was varied stepwise under a constant total (chloroform+aqueous) flow rate. The analyte was extracted to chloroform while both the phases, which were segmented by each other, were passing through an extraction coil. The segmented stream was then led to a UV/Vis detector directly without phase-separation. The absorbance of the chloroform and aqueous phases (A(o) and A(a), respectively) was each measured at the maximum absorption wavelength of the analyte. The plots of A(-1) against R(f), (AR(f))(-1) against R(f)(-1), and AR(f) against A gave straight lines, where A was A(o), A(a) or the sum of them (A(S)). The K(D) of the analyte was calculated from the slopes and intercepts of the plots. The log K(D) values obtained for the analytes (-0.5-1.4) were agreed well with the values measured by a shake-flask method. The present method is simple, rapid (5 min/determination) and applicable to the volatile compounds with reasonable precision (standard deviation of log K(D)<0.07).     

A study of the composition and properties of the ion-association complex of Rhodamine B with silicomolybdic acid, with a view to its analytical application

The composition of the ion-association complex of Rhodamine B with silicomolybdate has been examined by Job's method and spectrophotometric titration. The ratio of Rhodamine B to silicon in the complex is 4 : 1. The same ratio is obtained by analysis of the crystalline complex. The composition of the complex is identical in aqueous medium, an organic solvent (ethanol) and in the crystalline state (C(28)H(30)N(2)O(3))(4)SiMo(12)O(40)). The complex is stable in the organic solvent and has its absorption maximum at 555 nm and a molar absorptivity of 5 x 10(5) 1.mole(-1)cm(-1). The complex can be advantageously used for the determination of silicon.     

The co-effect of Sb and Nb on the SCR performance of the V2O5/TiO2 catalyst

The effect of the Sb and Nb additives on the V(2)O(5)/TiO(2) catalyst for the selective catalytic reduction (SCR) of NO with NH(3) was investigated. The experimental results show that either Nb or Sb can improve the activity of V(2)O(5)/TiO(2) catalyst. Higher Nb loading led to higher N(2) selectivity. The co-doping of Sb and Nb showed higher improving effect than the single doping of Sb or Nb. The V(2)O(5)/TiO(2) catalyst doped with Sb and Nb had a better H(2)O resistance than the V(2)O(5)/TiO(2) catalyst. The addition of Sb and Nb also enhance the resistance of the V(2)O(5)/TiO(2) catalyst to K(2)O poisoning. The catalysts were characterized by BET, XRD, TEM, and XPS. The results showed that the active components of V, Sb, and Nb were well interacting with each other. The coexistence of Sb and Nb will enhance the redox ability and surface acidity and thus promote the SCR performance.     

Kinetics and mechanisms of the allyl + allyl and allyl + propargyl recombination reactions

The kinetics and mechanisms of the self-reaction of allyl radicals and the cross-reaction between allyl and propargyl radicals were studied both experimentally and theoretically. The experiments were carried out over the temperature range 295-800 K and the pressure range 20-200 Torr (maintained by He or N(2)). The allyl and propargyl radicals were generated by the pulsed laser photolysis of respective precursors, 1,5-hexadiene and propargyl chloride, and were probed by using a cavity ring-down spectroscopy technique. The temperature-dependent absorption cross sections of the radicals were measured relative to that of the HCO radical. The rate constants have been determined to be k(C(3)H(5) + C(3)H(5)) = 1.40 × 10(-8)T(-0.933) exp(-225/T) cm(3) molecule(-1) s(-1) (Δ log(10)k = ± 0.088) and k(C(3)H(5) + C(3)H(3)) = 1.71 × 10(-7)T(-1.182) exp(-255/T) cm(3) molecule(-1) s(-1) (Δ log(10)k = ± 0.069) with 2σ uncertainty limits. The potential energy surfaces for both reactions were calculated with the CBS-QB3 and CASPT2 quantum chemical methods, and the product channels have been investigated by the steady-state master equation analyses based on the Rice-Ramsperger-Kassel-Marcus theory. The results indicated that the reaction between allyl and propargyl radicals produces five-membered ring compounds in combustion conditions, while the formations of the cyclic species are unlikely in the self-reaction of allyl radicals. The temperature- and pressure-dependent rate constant expressions for the important reaction pathways are presented for kinetic modeling.     

The -Cys-Cys- motif in Helicobacter pylori's Hpn and HspA proteins is an essential anchoring site for metal ions

The Hpn and HspA proteins from H. pylori are significant for nickel homeostasis and protect the cells from higher concentrations of external metal ions. Both proteins have a unique histidine- and cysteine-rich domain at the C terminus. The interactions of Ni(2+), Bi(3+), Zn(2+) and Cd(2+) ions with C-terminal Ac-CCSTSDSHHQ-NH(2) and Ac-EEGCCHGHHE-NH(2) fragments from Hpn and the Ac-GSCCHTGNHD-NH(2) sequence from HspA were studied by potentiometry, mass spectrometry, circular dichroism and UV-Vis spectroscopy. Ac-CC-NH(2) was used as a reference peptide. The studies have shown that nickel ions form planar complexes with a {2S(-),N(-)} binding mode. The thiol sulfurs of the -Cys-Cys- motif are also the anchoring sites for Bi(3+), Zn(2+) and Cd(2+) ions. The studied protein fragments have the highest affinity for Bi(3+) ions. The thermodynamic stability of Ni(2+) is much higher then that of Zn(2+).     

Spectral, thermal, electrochemical and analytical studies on Cd(II) and Hg(II) thiosemicarbazone complexes

The coordination characteristic of the investigated thiosemicarbazones towards hazard pollutants, Cd(II) and Hg(II), becomes the first goal. Their complexes have been studied by microanalysis, thermal, electrochemical and spectral (electronic, IR and MS) studies. The substitutent (salicylaldehyde, acetophenone, benzophenone, o-hydroxy-p-methoxybenzophenone or diacetylmonoxime) plays an important role in the complex formation. The coordination sites were the S for thiosemicarbazide (HTS); NN for benzophenone thiosemicarbazone (HBTS); NS for acetophenone thiosemicarbazone (HATS) and salicylaldehyde thiosemicarbazone (H(2)STS); NNS or NSO for diacetylmonoxime thiosemicarbazone (H(2)DMTS). The stability constants of Hg(II) complexes were higher than Cd(II). The kinetic and thermodynamic parameters for the different thermal decomposition steps in the complexes have been evaluated. The activation energy values of the first step ordered the complexes as: [Cd(H(2)STS)Cl(2)]H(2)O>[Cd(H(2)DAMTS)Cl(2)]>[Cd(HBTS)(2)Cl(2)]2H(2)O>[Cd(HATS)(2)Cl(2)]. The CV of [Cd(H(2)STS)Cl(2)]H(2)O and [Hg(HBTS)Cl(2)] were recorded. The use of H(2)DMTS as a new reagent for the separation and determination of Cd(II) ions from water and some synthetic samples using flotation technique is aimed to be discussed.     

Synergistic enhanced photocatalytic and photothermal activity of Au@TiO2 nanopellets against human epithelial carcinoma cells

The photocatalytic and plasmonic photothermal cancer cell-killing activity of the metallic Au-capped TiO(2) (Au@TiO(2)) composite colloidal nanopellets has been investigated on HeLa cells under UV-visible (350-600 nm) light irradiation. The Au@TiO(2) composite nanopellets with the uniform Au-capped TiO(2) structure were successfully synthesized by simple reduction of HAuCl(4) on the surface of TiO(2) nanoparticles. The morphological structure and surface properties of Au@TiO(2) were characterized by using UV-visible absorption spectroscopy, TEM, SEM, XPS, EDX and XRD analyses. The formation of hydroxyl radicals (˙OH) was confirmed by photoluminescence (PL) spectra. The photocatalytic and photothermal cell-killing activity of the Au@TiO(2) nanopellets was found to vary with the molar ratio of Au to TiO(2). The direct involvement of the metal particles in mediating the electron transfer from the photoexcited TiO(2) under the band gap excitation is considered to carry out the efficient photocatalytic reaction on the cells. The plasmonic absorption spectra of Au@TiO(2) suspensions were also measured for the evaluation of photothermal cell killing. The charge separation, the interfacial charge-transfer and photothermal activity promoted the photocatalytic-photothermal cancer-cell killing more than TiO(2) alone. The cytotoxic effect of Au@TiO(2) nanopellets with low concentration of gold (TiO(2) : Au molar ratio > 1 : 1) was found to be 100%, whereas that of the commercial TiO(2) (P25) was ca. 50%. The comparative study of the cell viability using Au alone and TiO(2) alone revealed that the synergistic effect of photocatalytic hydroxyl radical formation and Au-plasmonic photothermal heat generation plays a vital role in the cancer cell killing. A plausible mechanism was also proposed for photocatalytic cancer cell killing based on the obtained results.     

Characterization of self-assembled monolayers of porphyrins bearing multiple thiol-derivatized rigid-rod tethers

A series of multithiol-functionalized zinc porphyrins has been prepared and characterized as self-assembled monolayers (SAMs) on Au. The molecules, designated ZnPS(n) (n = 1-4), contain from one to four [(S-acetylthio)methyl]phenylethynylphenyl groups appended to the meso-position of the porphyrin; the other meso-substituents are phenyl groups. For the dithiol-functionalized molecules, both the cis- and the trans-appended structures were examined. The ZnPS(n) SAMs were investigated using X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and various electrochemical methods. The studies reveal the following characteristics of the ZnPS(n) SAMs. (1) The ZnPS(n) molecules bind to the Au surface via a single thiol regardless of the number of thiol appendages that are available per molecular unit. (2) The porphyrins in the ZnPS(3) and ZnPS(4) SAMs bind to the surface in a more upright orientation than the porphyrins in the ZnPS(1), cis-ZnPS(2), and trans-ZnPS(2) SAMs. The porphyrins in the ZnPS(3) and ZnPS(4) SAMs are also more densely packed than those in the cis-ZnPS(2) and trans-ZnPS(2) SAMs. The packing density of the ZnPS(3) and ZnPS(4) SAMs is similar to that of the ZnPS(1) SAMs, despite the larger size of the molecules in the former SAMs. (3) The thermodynamics and kinetics of electron transfer are generally similar for all of the ZnPS(n) SAMs. The general similarities in the electron-transfer characteristics for all of the SAMs are attributed to the similar binding motif.     

Chemical constituents and in vitro antioxidant activity of Phyllanthus wightianus

The whole plant of Phyllanthus wightianus (PW) was investigated for the antioxidant effects of three successive extracts: hexane (PWHE), chloroform (PWCE) and methanol (PWME), using standard in vitro models. The PWME exhibited a strong scavenging effect on 2,2-diphenyl-2-picryl hydrazyl (DPPH) free radicals and nitric oxide radical inhibition activity, due to possessing the highest content of tannins. The free radical scavenging effect of PWME was comparable with that of reference antioxidants. The extracts were subjected to isolation of their compounds: isomeric sterol mixture (1) [stigmasterol (1a), compesterol (1b) and β-sitosterol (1c)], fredilin (2), lupeol (3), gallic acid (4), bergenin (5), geraniin (6), corilagin (7) and ellagic acid (8) were established through the use of column chromatographic methods and spectral data. The percentage of tannins was also determined and estimated using the HPLC method. The data suggest that tannins are the active antioxidant compounds of P. wightianus. This study provides proof for the ethnomedical claims and reported biological activities of this plant. The plant therefore has very good therapeutic potential.     

Synthesis and reactivity of 1,2-bis(chlorodimethylgermyl)carborane and 1,2-bis(bromodimethylstannyl)carborane

The 1,2-bis(chlorogermyl)- (1) and 1,2-bis(bromostannyl)carborane (2) have been prepared by the reaction of dilithio-o-carborane with Me(2)GeCl(2) and Me(2)SnBr(2), respectively. Compounds 1 and 2 are found to be good precursors for the synthesis of a variety of cyclization compounds. The Wurtz-type coupling reaction of 1 and 2 using sodium metal afforded the four-membered digerma compound 3 and five-membered tristanna compound 4, respectively. The salt elimination reactions of 1 and 2 using Li(2)N(t)Bu and Li(2)PC(6)H(5) afforded the cyclic products [structure: see text]. The 1,2-bis(dimethylgermyl)carborane 9 and 1,2-bis(dimethylstannyl)carborane 10 were prepared by the reaction of 1 and 2 with sodium cyanoborohydride. The reactions of 9 and 10 with Pd(PPh(3))(4) afforded the bis(germyl)palladium 12 and bis(stannyl)palladium 13 complexes, respectively.     

Interfacial supramolecular self-assembled monolayers of C(60) by thiolated beta-cyclodextrin on gold surfaces via monoanionic C(60)

The supramolecular self-assembled monolayers (SAMs) of C(60) by thiolated beta-cyclodextrin (CD) on gold surfaces were constructed for the first time using C(60) monoanion. The results indicate that monoanionic C(60) plays a crucial role in the formation of the C(60)-containing self-assembled monolayers. The generation of C(60) monoanion and the formation process of C(60) SAMs were monitored in-situ by UV-visible and near-IR spectroscopy. The resulting C(60) SAMs were fully characterized by spectroscopic ellipsometry (SE), cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and water contact angle measurements. After the immobilization of C(60) by the SAMs of thiolated beta-CD, the film thickness increased by approximately 1 nm from 0.8 to 1.8 nm as determined by SE, demonstrating the formation of the supramolecular self-assembled monolayers of thiolated beta-CD/C(60). The new C(60) SAMs exhibited one quasi-reversible redox couple at half wave potential of -0.57 V vs SCE in aqueous solution containing 0.1 M KCl. The surface coverage of C(60) on the gold surfaces was estimated to be 1.1 x 10(-10) mol cm(-2). The XPS showed the assembly of C(60) over the thiolated beta-CD SAMs. The surface hydrophobicity increased greatly upon the formation of the C(60)-containing SAMs as analyzed by water contact angle measurements. The results are in agreement with the formation of 1:1 complex of C(60) and cyclodextrin on gold surfaces, though it also reveals some non-homogeneous features of the monolayers.     

Carbon paste electrodes modified with Bi(2)O(3) as sensors for the determination of Cd and Pb

Carbon paste electrodes bulk-modified with Bi(2)O(3)were used for the determination of Cd(II) and Pb(II). The best composition was 1% (wt%) Bi(2)O(3) in the paste. The measurements were made by differential pulse voltammetry in the potential range from -1.2 V to -0.3 V. The peak potential of the reoxidation of Cd is -0.85 V, and of Pb -0.60 V vs. SCE. The lowest concentration that could be determined was 5 microg L(-1) of both metals (preconcentration time 240 s), the relative standard deviation was 3.5%-5.0% (four determinations). The correlation coefficient ( r(2)) of the calibration curves was 0.9966 (for Cd) and 0.9971 (for Pb). The Bi(2)O(3)-modified electrode could be used for the analysis of drinking water, mineral water and urine.     

U(SMes*)n, (n = 3, 4) and Ln(SMes*)3 (Ln = La, Ce, Pr, Nd): lanthanide(III)/actinide(III) differentiation in agostic interactions and an unprecedented eta3 ligation mode of the arylthiolate ligand, from X-ray diffraction and DFT analysis

Reaction of U(NEt(2))(4) with HS-2,4,6-(t)Bu(3)C(6)H(2) (HSMes) gave U(SMes)(3)(NEt(2))(py) (1), whereas similar treatment of U[N(SiMe(3))SiMe(2)CH(2)][N(SiMe(3))(2)](2) afforded U(SMes)[N(SiMe(3))(2)](3) (2) and U(SMes)(3)[N(SiMe(3))(2)]. The first neutral homoleptic uranium(IV) thiolate to have been crystallographically characterized, U(SMes)(4) (4), was isolated from the reaction of U(BH(4))(4) and KSMes. The first homoleptic thiolate complex of uranium(III), U(SMes)(3) (5), was synthesized by protonolysis of U[N(SiMe(3))(2)](3) with HSMes in cyclohexane. The crystal structure of 5 exhibits the novel eta(3) ligation mode for the arylthiolate ligand. Comparison of the crystal structure of 5 with those of the isomorphous lanthanide congeners Ln(SMes)(3) (Ln = La, Ce, Pr, and Nd) indicates that the U-S, U-C(ipso)(), and U-C(ortho)() bond lengths are shorter than the corresponding ones in the 4f-element analogues, when taking into account the variation in the ionic radii of the metals. The distance between the uranium and the carbon atoms involved in the U...H-C epsilon agostic interaction of each thiolate ligand is shorter, by approximately 0.05 A, than that expected from a purely ionic bonding model. The lanthanide(III)/actinide(III) differentiation was analyzed by density functional theory (DFT). The nature of the M-S bond is shown to be ionic strongly polarized at the sulfur for M = U and iono-covalent (i.e. strongly ionic with low orbital interaction), for M = Ln. The strength of the U...H-C epsilon agostic interaction is proposed to be controlled by the maximization of the interaction between U(+) and S(-) under steric constraints. The eta(3) ligation mode of the arylthiolate ligand is also obtained from DFT.     

Depolarization ratio and correlation between the relative intensity data and the abundance ratio of various isotopes of liquid carbon tetrachloride at room temperature

The room temperature Stokes and anti-Stokes Raman spectra of liquid CCl(4) have been recorded. The intensity ratios of anti-Stokes to Stokes Raman bands as a function of Raman shift are obtained in agreement with polarizability theory. The depolarization ratio rho (nu) as a function of Raman shift is obtained also in agreement with automatically scanned depolarization ratio rho (nu). Ratio of the intensity of the isotopic nu(1) bands indicates small deviation from the theoretical relative abundance of CCl(4) isotopes. The intensity ratio of the [nu(3)-nu(4), (nu(1)+nu(4))-nu(4)] and nu(1) bands is obtained. The consequences of the presence of different isotopes of CCl(4) on the depolarization ratio of its vibrational bands are discussed. The effects of impurities in liquid CCl(4) on depolarization ratio of the nu(1) band are estimated.     

激光对火焰的诊断Ⅱ. 激光诱导荧光法对液化石油气/空气火焰中的OH基浓度二维分布的检测

通过部份预混的富燃料液化石油气/空气火焰中各部份的OH(A~(2∑~+)←→X ~(2Π))的激光诱导荧光信号进行逐点检测, 获得了OH(X)基在火焰中央纵剖面上精细的二维等浓度线图。OH(X)在外焰边缘上分布最浓, 是自内向外扩散的H原子与O原子相遇而引起反应的结果。同时一部份OH(A)基的生成, 发出了紫外的A→X化学发光, 形成了外焰的轮廓。