铈(Ⅳ)-L-酪氨酸的荧光光度法的研究及应用

本文提出了以L-酪氨酸为荧光剂测定铈的方法。其荧光物质的λ_(ex)=305nm,λ_(em)=347nm。当铈的浓度在5×10~(-7)～5×10~(-5)mol/L范围内与荧光强度呈线性关系。用本法测定了稀土样品和合成样品中铈的含量。     

多目标单纯形法在茜素红催化荧光测定痕量钒(V)中的应用

本文建立了茜素红催化荧光测定痕量钒(V)的新方法.在λ_(ex)/λ_(em)=381/445(nm),由多目标罚函数单纯形法获得最佳实验条件为:1%茜素红6mL,1mol/L盐酸2.1mL,饱和KIO_4,1.8mL,反应温度85℃,反应时间15.30min,钒的检测下限为7×10~(-10)g/mL,反应对试剂及金属离子均为一级反应.方法用于水样和铬钒钢中钒的测定,结果满意.     

动力学荧光法测定药物、水果、蔬菜中的维生素C

提出了动力学荧光法测定维生素C的新方法。该法基于脱氢抗坏血酸(DAsA)对还原型罗丹明B在钒(Ⅴ)催化下自动氧化的活化作用。在pH为3.7的HAc-NaAc缓冲溶液中,还原型罗丹明B在钒(Ⅴ)催化下的氧化反应速度与DAsA的浓度成正比,采用固定时间法,测定在λ_(ex)=554 nm,λ_(em)=580 nm时的荧光强度。DAsA的线性范围为0～4.0×10~(-7)mol/L, 检测限4.0×10~(-9)mol/L。用该法测定药物、水果、蔬菜中维生素C含量,回收率在93%～108%之间。     

水杨醛异烟酰腙与镓荧光反应的研究

本文研究了荧光新试剂水杨醛异烟酰腙与镓的荧光反应,用紫外光谱法测定了试剂离解常数。在此荧光体系中,荧光配合物λ_(ex)=395nm、λ_(em)=480nm。在pH3.8、60％(V/V)乙醇介质中,测定的线性范围为0～1.0 μg/10mL,方法灵敏度为4×10~(-4)ppm。用荧光法测定了配合物的组成比及表观稳定常数。建立了镓的新荧光光度法,将其用于地质样品分析,精密度和准确度良好。     

二安替比林对乙氧基苯基甲烷吸光光度法测定微量V(Ⅴ)

合成了新试剂二安替比林对乙氧基苯基甲烷,并研究了与V(Ⅴ)的显色反应。在磷酸介质中和Mn(Ⅱ)-乳化剂OP的作用下,显色反应的产物为橙黄色,ε为2.90×10~6,λ_(max)=450nm,测定V(Ⅴ)的线性范围为4～32μg·L~(-1)。用于中草药中微量V(Ⅴ)的测定,结果满意。     

二安替比林对异丙氧基苯基甲烷与钒(V)显色反应及机理

合成了新试剂二安替比林对异丙氧基苯基甲烷(DApIM),研究了它和钒(Ⅴ)的显色反应及机理.在磷酸介质中,Mn(Ⅱ)和吐温-80存在下,V(Ⅴ)氧化DApIM生成黄色产物,λ_(max)=450nm,ε=4.71×10~6·L·mol~(-1)·cm~(-1),钒(Ⅴ)的含量在0～12μg/L内符合比尔定律.方法用于废渣和生物样品中钒的测定,结果满意.     

邻氯苯基荧光酮-CTMAB吸光光度法测定微量钒

在pH4.0乙酸-乙酸钠缓冲溶液中,在CTMAB存在下,钒(Ⅳ)与o-CPF生成紫红色络合物,λ_(max)=560m,摩尔吸光系数ε=5.1×10~4,钒量在0—30μg/25mL范围符合比尔定律,方法已用于矿石和钢铁中微量钒的测定。     

对三氟甲基偶氮氯膦的合成及其稀土络合物分光光度法的研究——铝合金中稀土总量的测定

合成了新的稀土显色剂对三氟甲基偶氮氯膦。研究了用此显色刑测定铝合金中稀土总量的分光光度法。在酸性介质中与稀土元素成正序反应。轻稀土λ_(max)=668nm,ε=0.96～1.02×10~5·L·mol~(-1)·cm~(-1);重稀土λ_(max)=659nm,ε=1.03～1.29×10~5L·mol~(-1)·cm~(-1)。     

硫胺素—钒（V）—Triton X—100荧光光度法的研究及应用

本文研究了在Trton X-100存在下,琉胺素和钒(Ⅴ)的荧光反应,建立了测定硫胺素的新方法。测定琉胺素的线性范围为2.5×10~(-7)～2.5×10~(-5)mol/L,可用于直接测定生物样品中的硫胺素。     

溴金酸-罗丹明B和氯金酸-罗丹明6G超高灵敏显色反应的研究——离心光度法测定金

本文研究了一个超高灵敏的测定金的方法,离心光度法。在Au-Br-RB体系中络合物λ_(max)=559nm,表观摩尔吸光系数ε_(559)=3.39×10~(11)L·mol~(-1)·cm~(-1),Au(Ⅲ)浓度(0.20×10~(-5)～2.5×10~(-5)μg/10 ml呈线性关系;Au-Cl-R6G体系络合物λ_(max)=531 nm,表观摩尔吸光系数ε_(531)=2.52×10~8L·mol~(-1)·cm~(-1),Au(Ⅲ)浓度(0.20×10~(-2)～2.4×10μg/10ml。呈线性(Ⅲ)关系。本法已用于某些低品位矿样中金的分析,分析结果与标准值相吻合。探讨了超高灵敏的显色反应机理。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.