ELECTROSPRAYING/ELECTROSPINNING OF POLY(γ-STEARYL-L-GLUTAMATE): FORMATION OF SURFACES WITH SUPERHYDROPHOBICITY

  Electrospraying/electrospinning of poly(γ-stearyl-L-glutamate) (PSLG) was investigated on a series solutions with different concentrations in chloroform. Field emission scanning electron microscopy (FESEM) and attenuated total reflectance Fourier transform infrared spectroscopy (FT-IR/ATR) were used to characterize the morphology and structure of the electrosprayed/electrospun polypeptide mats. It was found that electrospraying of PSLG with concentrations lower than 16 wt% afforded beads, while microfibers could be electrospun at the concentration of 22 wt%. The hydrophobicity of the electrosprayed/electrospun PSLG mats was investigated with static water contact angle (WCA) and tilt angle measurements. It was demonstrated that the superhydrophobic surfaces of PSLG with WCAs and tilt angles in the ranges of 150°-170° and 16.5°-4.2°, respectively, were obtained through electrospraying/electrospinning process.     

卟啉化聚(L-谷氨酸-γ-十八烷酯)的合成及其静电纺纤维膜制备

以单氨基卟啉作为引发剂,引发L-谷氨酸-γ-十八烷酯N-羧基内酸酐(SLGNCA)开环聚合合成卟啉化聚(L-谷氨酸-γ-十八烷酯)(PSLG),进一步通过静电纺丝制备其纤维膜.相比于自由氨基卟啉,金属氨基卟啉尤其是钴氨基卟啉引发得到的PSLG具有更高的分子量.紫外-可见光谱和荧光光谱研究表明,卟啉化PSLG依然具有卟啉独特的光谱性能,静电纺后可以制备具有均匀红色荧光的微米级纤维.     

Superhydrophobicity of PHBV fibrous surface with bead-on-string structure

A poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) fibrous surface with various bead-on-string structures was fabricated by electrospinning. PHBV was electrospun at various concentrations and then CF4 plasma treatment was employed to further improve the hydrophobicity of the PHBV fiber surfaces. The surface morphology of the electrospun PHBV mats was observed by scanning electron microscopy (SEM). The surface properties were characterized by water contact angle (WCA) measurements and X-ray photoelectron spectroscopy (XPS). The surface morphology of the electrospun PHBV fibrous mats with the bead-son-string structure varied with the solution concentration. The WCA of all of the electrospun PHBV mats was higher than that of the PHBV film. In particular, a very rough fiber surface including porous beads was observed when PHBV was electrospun from the solution with a concentration of 26 wt%. Also, its WCA further increased from 141 degrees to 158 degrees after CF(4) plasma treatment for 150 s. PHBV can be rendered superhydrophobic by controlling the surface morphology and surface energy, which can be achieved by adjusting the electrospinning and plasma treatment conditions.     

The electrospun poly(ε‐caprolactone)/fluoridated hydroxyapatite nanocomposite for bone tissue engineering

Biodegradable cell‐incorporated scaffolds can guide the regeneration process of bone defects such as physiological resorption, tooth loss, and trauma which medically, socially, and economically hurt patients. Here, 0, 5, 10, and 15 wt% fluoridated hydroxyapatite (FHA) nanoparticles containing 25 wt% F^? and 75 wt% OH^? were incorporated into poly(ε‐caprolactone) (PCL) matrix to produce PCL/FHA nanocomposite scaffolds using electrospinning method. Then, scanning electron microscopy (SEM), X‐ray diffraction (XRD) pattern, and Fourier transform infrared spectroscopy (FTIR) were used to evaluate the morphology, phase structure, and functional groups of prepared electrospun scaffolds, respectively. Furthermore, the tensile strength and elastic modulus of electrospun scaffolds were investigated using the tensile test. Moreover, the biodegradation behavior of electrospun PCL/FHA scaffolds was studied by the evaluation of weight loss of mats and the alternation of pH in phosphate buffer saline (PBS) up to 30 days of incubation. Then, the biocompatibility of prepared mats was investigated by culturing MG‐63 osteoblast cell line and performing MTT assay. In addition, the adhesion of osteoblast cells on prepared electrospun scaffolds was studied using their SEM images. Results revealed that the fiber diameter of prepared electrospun PCL/FHA scaffolds alters between 700 and 900 nm. The mechanical assay illustrated the mat with 10 wt% FHA nanoparticles revealed the highest tensile strength and elastic modulus. The weight loss alternation of mats determined around 1% to 8% after 30 days of incubation. The biocompatibility and cell adhesion of mats improved by increasing the amounts of FHA nanoparticles.     

EFFECT OF GAS FLOW RATE ON CRYSTAL STRUCTURES OF ELECTROSPUN AND GAS-JET/ELECTROSPUN POLY(VINYLIDENE FLUORIDE) FIBERS

The effect of gas flow rate on crystal structures of electrospun and gas-jet/electrospun poly(vinylidene fluoride) (PVDF) fibers was investigated.PVDF fibers were prepared by electrospinning and gas-jet/electrospinning of its N,N-dimethylformamide (DMF) solutions.The morphology of the PVDF fibers was investigated by scanning electron microscopy (SEM).With an increase of the gas flow rate,the average diameters of PVDF fibers were decreased.The crystal structures and thermal properties of the PVDF fibers w...     

Assessment of the parameters influencing the fiber characteristics of electrospun poly(ethyl methacrylate) membranes

This work evaluates the influence of electrospinning process parameters on the mean diameter and standard deviation of fiber diameters in electrospun poly(ethyl methacrylate) (PEMA). Processing conditions were selected using Taguchi’s statistical method. Oriented and unoriented electrospun mats with good mechanical properties were produced and demonstrated with tensile stress–strain diagrams. Differential scanning calorimetry (DSC) experiments showed that the polymer chains were forced into non-equilibrium conformations due to electrospinning. Enthalpic recovery during a heating scan is shown by an endothermic peak in the initial DSC heating scan that disappears in subsequent heating scans. An increase in the glass transition temperature with respect to PEMA films shows that the polymer is not equilibrated by heating above glass transition. Cell attachment was tested with MC3T3-E1 pre-osteoblastic cells cultured for short time periods on the electrospun mats. It is shown that the cells present less extended morphology with more diffuse perimetral focal adhesions than cells cultured on flat substrates. A tendency of cells to align in the direction of the substrate fibers in oriented electrospun membranes was also found.     

Study of charge storage in the nanofibrous poly(ethylene terephthalate) electrets prepared by electrospinning or by corona discharge method

In this paper, the charge storage performance of electrospun poly(ethylene terephthalate) (PET) mats with high specific surface area was evaluated in comparison to that of PET film electrets. Corona discharge method was used to charge the electrospun PET mats and PET films. The surface potential decay measurements revealed that the corona charged РЕТ mats had higher initial values for the normalized surface potential compared to the РЕТ electret films. A tendency for stabilization of the electret charge to one and the same value for all charged samples (mats and films) after the 50th day was observed. The peaks at 90 °C in the thermally stimulated current (TSC) spectra of uncharged and charged in corona discharge electrospun PET mats were observed and attributed to a relaxation of the separated space charges, the dipole disorientation or injected charges within the bulk. It was found that the value of the storage charge in a corona charged electrospun PET mats was higher than that in PET mats prepared by electrospinning.     

Poly[bis(2,2,2-trifluoroethoxy)phosphazene] superhydrophobic nanofibers

Nanofibers of poly[bis(2,2,2-trifluoroethoxy)phosphazene] were produced by electrospinning from solutions in tetrahydrofuran, methylethyl ketone, and acetone. The fiber diameter varied from 80 nm to 1.4 microm by changes in the concentration of the polymer solution. The electrospun nonwoven mats showed enhanced surface hydrophobicity compared to spun cast films with up to a 55 degrees increase in water contact angle. The hydrophobicity varied with fiber diameter and surface morphology, with contact angles to water being in the range of 135 degrees -159 degrees. A low value of hysteresis (<4 degrees) was recorded for the superhydrophobic surfaces. The extremely high hydrophobicity of these mats is a combined result of a fluorinated surface and the inherent surface roughness of an electrospun mat.     

聚偏氟乙烯电纺膜及其电化学性能的研究

用电纺的方法制备了聚偏氟乙烯纳米纤维膜,它们具有多微孔结构,能够作为锂电池聚合物电解质.电纺中聚合物溶液的浓度对制备的电纺膜的结构形态有很大的影响,低浓度(10 wt%)时得到珠丝结构的膜,浓度15 wt%时则为纤维结构,而高浓度(18 wt%)时,电纺膜为交联的网状结构.用电纺法制备的聚偏氟乙烯纳米纤维微孔膜具有较高的孔隙率,而且它们与锂金属电极具有良好的界面稳定性;在25℃时吸液率最高可达340%,以这种膜制备的聚合物电解质室温电导率可达到1.57×10-3S.cm-1;由该电解质组装的扣式电池以0.5 mA.cm-2恒流充放电,25℃时50次循环后几乎无容量损失,具有良好的循环性能;即使60℃时,电池仍能保持良好的工作稳定性.     

Electrospinning of nylon-6,66,1010 terpolymer

Ultrafine nylon fibers were prepared by electrospinning of nylon-6,66,1010 terpolymer solution in 2,2,2-trifluoroethanol (TFE). The morphology, crystallinity and mechanical properties of the electrospun nylon-6,66,1010 fibers were investigated by scanning electron microscope (SEM), differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and tensile test. The effects of electrospun process parameters such as solution concentration, voltage and tip-to-collector distance on the morphology and the average size of the electrospun fibers were also studied. The results show that the spinnable concentration of nylon-6,66,1010/TFE solution is in the range of 6-14 wt%, and higher solution concentration favors the formation of uniform fibers without beads. The diameters of the electrospun fibers increase with increasing the solution concentration and decrease slightly with increasing the voltage and needle tip-to-collector distance. But no obvious morphology changes were found with the increase of the voltage and collection distance. DSC and WAXD results suggest that the electrospun nylon-6,66,1010 membranes have lower crystallinity than those of the corresponding casting films. The electrospun nylon-6,66,1010 membrane obtained from the 14 wt% concentration exhibits the largest tensile strength and elongation at break.     

Encapsulation of proteins in poly(l-lactide-co-caprolactone) fibers by emulsion electrospinning

This study was aimed at investigating emulsion electrospinning to prepare biodegradable fibrous mats with encapsulation of human-nerve growth factor (NGF). One of the best methods for fabricating a bio-functional tissue engineering scaffold is to load bioactive agent into the scaffold. In this work, the feasibility of incorporating NGF into poly(l-lactide-co-caprolactone) fibers by emulsion electrospinning has been studied. The release behavior of encapsulated bovine serum albumin (BSA) was investigated. The bioactivity of NGF released from fibrous mats was verified by testing the neurite outgrowth of rat pheochromocytoma cells (PC12). Furthermore, the process of fiber forming during emulsion electrospinning was discussed. The results demonstrate that emulsion electrospun fibers can successfully encapsulate proteins and release them in a sustained manner. The bioactivity of NGF released from emulsion electrospun fibers was confirmed by PC12 bioassays.     

Influence of solvents properties on morphology of electrospun polyurethane nanofiber mats

Segmented polyurethane (SPU) nanofiber mats were prepared by electrospinning technique using the combination of four different solvents viz. tetrahydrofuran, N,N′‐dimethyl formamide, N,N′‐dimethyl acetamide, and dimethyl sulfoxide. Morphology of the electrospun nanofibers was examined by field emission scanning electron microscope. Experimental results revealed that the morphologies of polyurethane nanofiber mats have been changed significantly with the solvent selection for the electrospinning. It was observed that the diameters and morphology of the SPU nanofibers were influenced greatly by the use of combination of solvents. The uniform polyurethane nanofibers without beads or curls could be prepared by electrospinning through the selection of combination of good conductive and good volatile solvent viz. 7.5 wt/v% of SPU in N,N′‐dimethyl formamide/tetrahydrofuran (30 : 70 v/v) solutions at 20 kV applied voltages and volume flow rate of 1 ml/min. On the basis of the results obtained from this investigation, it has been established that solvent selection is one of the driving factors for controlling the morphology of the polyurethane electrospun nanofiber mats. The well‐controlled morphology of electrospun polyurethane nanofiber mats could be useful for many potential industrial applications such as in biomedical, smart textiles, nanofiltration, and sensors. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization of poly(methyl methacrylate) nanofiber mats by electrospinning process

In this study, the aim is to describe the influence of electrospinning parameters on the morphology, the water wetting property and dye adsorption property of poly(methyl methacrylate) nanofiber mats. Specifically, the effects of solution concentration, solvent type, applied voltage, distance between the electrodes and particulate reinforcement on the diameter and shape of the nanofibers were investigated. All poly(methyl methacrylate) nanofiber mats contained beaded nanofiber structures. With increasing the polymer solution concentration, the average fiber diameter also increased. Poly(methyl methacrylate) nanofiber mat electrospun from dimethylformamide solution resulted in thicker fibers when compared with the mat electrospun from acetone solution. Increasing the electric potential difference between the collector and the syringe tip did not increase the average fiber diameter. Besides increasing the distance between the electrodes resulted in a decrease in the average fiber diameter. When compared with PMMA nanofiber mat, thicker fibers were obtained with silica nanoparticles reinforced nanofiber mat. According to the water contact angle measurements, all poly(methyl methacrylate) nanofiber mats revealed hydrophobic surface property. PMMA nanofiber mat with the highest water contact angle gave rise to the highest dye adsorption capacity.     

Crosslinked chitosan nanofiber mats fabricated by one-step electrospinning and ion-imprinting methods for metal ions adsorption

The Pb(Ⅱ)ion-imprinting electrospun crosslinked chitosan nanofiber mats were fabricated by one-step electrospinning and ion-imprinting methods and their application as adsorbents for metal ions was also investigated.The resulting chitosan nanofiber mats were characterized by scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS)and thermal gravimetric analysis(TGA).The Pb(Ⅱ)ion-imprinting electrospun crosslinked chitosan nanofiber mats were used as adsorbents for the removal of Pb(Ⅱ)ions from aqueous or acid solutions.The effects of p H values,contact time,content of crosslinker(glutaraldehyde)on Pb(Ⅱ)ions adsorption were studied.The results indicated that the Pb(Ⅱ)ion-imprinting electrospun crosslinked chitosan nanofiber mats had the highest adsorption capacity of 110.0 mg/g at p H 7.The kinetic study demonstrated that the adsorption of Pb(Ⅱ)ions followed the pseudo-second-order model.The equilibrium isotherm data showed that the Langmuir model was the most suitable for predicting the adsorption isotherm of the studied system.The Pb(Ⅱ)ion-imprinting electrospun crosslinked chitosan nanofiber mats had good adsorption selectivity,which illustrates the equilibrium adsorption capacity in the order of Pb(Ⅱ)Cu(Ⅱ)Zn(Ⅱ)Cd(Ⅱ)Ni(Ⅱ).The Pb(Ⅱ)ion-imprinting electrospun crosslinked chitosan nanofiber mats were stable and had good reuse ability.     

Electrospun poly(styrene-block-dimethylsiloxane) block copolymer fibers exhibiting superhydrophobicity

Block copolymer poly(styrene-b-dimethylsiloxane) fibers with submicrometer diameters in the range 150-400 nm were produced by electrospinning from solution in tetrahydrofuran and dimethylformamide. Contact angle measurements indicate that the nonwoven fibrous mats are superhydrophobic, with a contact angle of 163 degrees and contact angle hysteresis of 15 degrees . The superhydrophobicity is attributed to the combined effects of surface enrichment in siloxane as revealed by X-ray photoelectron spectroscopy and surface roughness of the electrospun mat itself. Additionally, the fibers are shown by transmission electron microscopy to exhibit microphase-separated internal structures. Calorimetric studies confirm the strong segregation between the polystyrene and poly(dimethylsiloxane) blocks.     

Fabrication of tragacanth and water soluble tragacanth nanoparticles through electrospraying

This work reports the fabrication of tragacanth and water soluble tragacanth (WST) through electrospraying technique. Tragacanth is a biocompatible and biodegradable carbohydrate with a wide range of applications. Suspensions of tragacanth in water and water‐ethanol (70:30) were electrosprayed successfully. Moreover, deesterified tragacanth (WST), which is highly water soluble, was also successfully electrosprayed. The results showed that electrospraying technique is capable of producing tragacanth nanoparticles with an average size in the range of 30 to 50 nm, depending on the electrospraying conditions. Water soluble tragacanth gave rise to even smaller nanoparticles. It was also found that lowering feed rate, increasing nozzle‐ collector distance, and increasing voltage decrease the average size of the electrosprayed tragacanth nanoparticles. The molecular weight of tragacanth and WST was measured to be 610 and 301 KDa, respectively. The electrosprayed tragacanth and WST nanoparticles showed moisture regain of 50% and 75%, respectively. These values are much higher than that of their normal powder form. Fourier transform infrared proved the absence of ester groups in the WST as a result of deesterification. X‐ray diffraction studies showed an amorphous microstructure for both tragacanth and WST before electrospraying. After electrospraying, the amorphous structure of the 2 showed some orientation.     

Carbendazim‐loaded electrospun poly(vinyl alcohol) fiber mats and release characteristics of carbendazim therefrom

Ultra‐fine poly(vinyl alcohol) (PVA) electrospun fiber mats containing carbendazim were successfully fabricated by electrospinning from the neat PVA solution containing carbendazim in various amounts based on the weight of PVA. The morphological appearance of both the neat and the carbendazim‐loaded electrospun PVA fibers were smooth and the incorporation of carbendazim in the neat PVA solution did not affect the morphology of the resulting fibers. The average diameters of the neat and the carbendazim‐loaded electrospun PVA fibers ranged between 155 and 160 nm. The chemical integrity of the as‐loaded carbendazim in the carbendazim‐loaded electrospun PVA fiber mats was intact as verified by the ¹H‐nuclear magnetic resonance spectroscopy. Thermal properties of the carbendazim‐loaded electrospun PVA fiber mats were analyzed by differential scanning calorimetry and thermogravimetric analysis. The release characteristics of the carbendazim‐loaded electrospun PVA mats were investigated by the total immersion method in distilled water at 30°C. The carbendazim‐loaded electrospun PVA mats exhibited greater amount of carbendazim released than the carbendazim‐loaded as‐cast films. Copyright © 2010 John Wiley & Sons, Ltd.     

Electrospinning of hydroxypropyl methylcellulose trimellitate solutions

Nonwoven fiber mats of hydroxypropyl methylcellulose trimellitate(HPMCT) with potential applications in controlled delivery of drugs and scaffolds for tissue cultures have been successfully fabricated by electrospinning of HPMCT solutions.The formation and diameters of HPMCT fibers fabricated by electrospinning were strongly influenced by the solvents employed,electrostatic field strength,and solution concentrations.The electrospun products generated from all HPMCT solutions with various weight-average mole...     

Preparation and characterization of coaxial electrospun thermoplastic polyurethane/collagen compound nanofibers for tissue engineering applications

Collagen functionalized thermoplastic polyurethane nanofibers (TPU/collagen) were successfully produced by coaxial electrospinning technique with a goal to develop biomedical scaffold. A series of tests were conducted to characterize the compound nanofiber and its membrane in this study. Surface morphology and interior structure of the ultrafine fibers were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM), whereas the fiber diameter distribution was also measured. The crosslinked membranes were also characterized by SEM. Porosities of different kinds of electrospun mats were determined. The surface chemistry and chemical composition of collagen/TPU coaxial nanofibrous membranes were verified by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectrometry (FTIR). Mechanical measurements were carried out by applying tensile test loads to samples which were prepared from electrospun ultra fine non-woven fiber mats. The coaxial electrospun nanofibers were further investigated as a promising scaffold for PIECs culture. The results demonstrated that coaxial electrospun composite nanofibers had the characters of native extracellular matrix and may be used effectively as an alternative material for tissue engineering and functional biomaterials.     

Aligned electrospun cellulose fibers reinforced epoxy resin composite films with high visible light transmittance

Uniaxially oriented cellulose nanofibers were fabricated by electrospinning on a rotating cylinder collector. The fiber angular standard deviation (a parameter of fiber orientation) of the mats was varied from 65.6 to 26.2^o by adjusting the rotational speed of the collector. Optically transparent epoxy resin composite films reinforced with the electrospun cellulose nanofibrous mats were then prepared by the solution impregnation method. The fiber content in the composite films was in the range of 5–30 wt%. Scanning electron microscopy studies showed that epoxy resin infiltrated and completely filled the pores in the mats. Indistinct epoxy/fiber interfaces, epoxy beads adhering on the fiber surfaces, and torn fiber remnants were found on the fractured composite film surfaces, indicating that the epoxy resin and cellulose fibers formed good interfacial adherence through hydrogen-bonding interaction. In the visible light range, the light transmittance was 88–92% for composite films with fiber loadings of 16–32 wt%. Compared to the composite films reinforced with 20 wt% randomly oriented fibers, the mechanical strength and Young’s modulus of the composite films reinforced with same amount of aligned fibers increased by 71 and 61%, respectively. Dynamical mechanical analysis showed that the storage moduli of the composite films were greatly reinforced in the temperature above the glass transition temperature of the epoxy resin matrix.