Robust dithiocarbamate-anchored amine functionalization of Au nanoparticles

We introduce an effective and facile technique that achieves robust amine functionalization of Au nanoparticles by binding the polyamine poly(allylamine hydrochloride) (PAH) to the surface using a dithiocarbamate (DTC) modification of the side group amines. The DTC anchor confers superior short- and long-term colloidal stability compared to a physisorbed layer of the same polymer. We also demonstrate that the surface amines are available for further functionalization and that at least four alternately charged polyelectrolyte layers can be assembled onto the particles. The latter modification could not be performed on a physisorbed functional layer, so this demonstrates the effectiveness of the DTC groups in robustly anchoring the polymer to the particle surface. At the same time, the DTC-anchored polymer layer is less than 2 nm thick in the dry state. This is one-third of the thickness of a physisorbed polyamine layer deposited under the same conditions, and sufficiently thin that the plasmonic field enhancement on the metal particle remains accessible to the outside environment. We attribute the difference in thickness to multiple DTC bonds on each polymer chain forcing it into much closer conformity to the particle surface than in the physisorbed case.     

Laser-induced growth and reformation of gold and silver nanoparticles

The sizes, shapes, and growth rates of gold and silver nanoparticles stabilized with polyvinylpyrrolidone in water can be controlled by using picosecond laser pulses. The nucleation of small metal clusters formed with NaBH₄ addition to produce nanoparticles takes two months with aging but 30 min with laser irradiation. Laser pulses can also induce nanoparticles to have narrow size and shape distribution or to undergo aggregation into much larger particles. The latter process is more likely found when the metal is silver or the irradiation wavelength is short. Laser-induced growth and shape transformation processes are explained in terms of BH₄ ⁻ depletion, metal fusion, and electron ejection followed by disintegration.     

Functionalization of gold and silver nanoparticles with diphenyl dichalcogenides probed by surface enhanced Raman scattering

This paper describes a surface‐enhanced Raman scattering (SERS) systematic investigation regarding the functionalization of gold (Au) and silver (Ag) nanoparticles with diphenyl dichalcogenides, i.e. diphenyl disulfide, diphenyl diselenide, and diphenyl ditelluride. Our results showed that, in all cases, functionalization took place with the cleavage of the chalcogen–chalcogen bond on the surface of the metal. According to our density functional theory calculations, the molecules assumed a tilted orientation with respect to the metal surface for both Au and Ag, in which the angle of the phenyl ring relative to the metallic surface decreased as the mass of the chalcogen atom increased. The detected differences in the ordinary Raman and SERS spectra were assigned to the distinct stretching frequencies of the carbon–chalcogen bond and its relative contribution to the ring vibrational modes. In addition, the SERS spectra showed that there was no significant interaction between the phenyl ring and the surface, in agreement with the tilted orientation observed from our density functional theory calculations. The results described herein indicate that diphenyl dichalcogenides can be successfully employed as starting materials for the functionalization of Au nanoparticles with organosulfur, organoselenium, and organotellurium compounds. On the other hand, diphenyl disulfide and diphenyl diselenide could be employed for the functionalization of Ag nanoparticles, while the partial oxidation of the organotellurium unit could be detected on the Ag surface. Copyright © 2011 John Wiley & Sons, Ltd.     

Laser-induced synthesis of silver nanoparticles and their conjugation with protein

Partially oxidized spherical silver nanoparticles (AgNPs) of different size are prepared by pulsed laser ablation in water and directly conjugated to protein S-ovalbumin for the first time and characterized by various optical techniques. UV–Visible spectrum of AgNPs showed localized surface plasmon resonance (LSPR) peak at 396 nm which red shift after protein addition. Further the increased concentration of AgNPs resulted a decrease in intensity and broadening of S-ovalbumin peak (278 nm), which can be related to the formation of protein NPs complex caused by the partial adsorption of S-ovalbumin on the surface of AgNPs. The red shift in LSPR peak of AgNPs after mixing with S-ovalbumin and decrease in protein-characteristic peak with increased silver loading confirmed the formation of protein–AgNPs bioconjugates. The effect of laser fluence on the size of AgNPs and nanoparticle–protein conjugation in the size range 5–38 nm is systematically studied. Raman spectra reveal broken disulphide bonds in the conjugated protein and formation of Ag–S bonds on the nanoparticle surface. Fluorescence spectroscopy showed quenching in fluorescence emission intensity of tryptophan residue of S-ovalbumin due to energy transfer from tryptophan moieties of albumin to AgNPs. Besides this, small blue shift in emission peak is also noticed in presence of AgNPs, which might be due to complex formation between protein and nanoparticles. The binding constant (K) and the number of binding sites (n) between AgNPs and S-ovalbumin have been found to be 0.006 M^?1 and 7.11, respectively.     

微乳液法制备纳米银粒子的结构及其荧光现象研究

采用微乳液法合成了不同粒径的纳米银粒子,考察了环己烷和甲苯作为油相对制备纳米银的影响.对纳米银粒子的尺寸与结构进行了表征,观察到近球形多晶粒子,并有孪晶结构存在,对晶体结构的分析表明银粒子存在不同程度的点阵畸变,晶面间距增大.不同粒径的纳米银粒子氯仿体系可呈现荧光光谱,而纳米银甲苯体系则无荧光发射.结合紫外—可见吸收光谱和电子自旋共振谱对该体系的荧光发射机理进行了分析 关键词： 微乳液 纳米银粒子 纳米晶结构 荧光     

Magnetron and pulsed laser deposition of silver and gold nanoparticles and discontinuous films and their optical properties

Ag and Au nanoparticles are obtained by magnetron sputtering and pulsed laser deposition under different conditions, and the features of their absorption spectra associated with plasmon resonances are investigated. Optimal deposition conditions for obtaining small (5?C10 nm) silver nanoparticles with a high density of surface distribution include an increased argon pressure (2.5 × 10^?2 Torr) and a low discharge voltage (100 V). Gold nanoparticle arrays obtained by pulsed laser deposition at a temperature of 200°C in vacuum are more uniformly distributed on the substrates than those deposited at room temperature in argon. It is shown that the maximum of the plasmon absorption shifts toward shorter wavelengths with a decrease in the equivalent thickness of metal films and depends not only on this thickness but also on the type of substrate, which is responsible for the morphology of nanoparticle arrays.     

Formation and encapsulation of gold nanoparticles using a polymeric amine reducing agent

We report on the use of poly(allylamine) hydrochloride (PAH) as a reducing agent for the controlled formation of gold nanoparticles (AuNPs) in the size range of 5–50 nm. The formation of AuNPs using this polymer matrix allows for the AuNPs to be imbedded in the polymer matrix, once formed. The kinetics of AuNP formation are shown to be pseudo first-order in [HAuCl₄] at room temperature. The kinetics of AuNP formation are controlled by the ratio of reducing agent to HAuCl₄ as well as the overall concentration of the PAH and HAuCl₄. Additionally, at low PAH:HAuCl₄ mole ratios, the plasmon resonance wavelength can be controlled through the ratio of the reactants. This plamson resonance shift is shown to be related to AuNP size by means of TEM imaging data on the AuNPs.     

Biosynthesis of gold nanoparticles by Aspergillum sp. WL-Au for degradation of aromatic pollutants

A simple method for synthesis of gold nanoparticles (AuNPs) using Aspergillum sp. WL-Au was presented in this study. According to UV–vis spectra and transmission electron microscopy images, the shape and size of AuNPs were affected by different parameters, including buffer solution, pH, biomass and HAuCl₄ concentrations. Phosphate sodium buffer was more suitable for extracellular synthesis of AuNPs, and the optimal conditions for AuNPs synthesis were pH 7.0, biomass 100 mg/mL and HAuCl₄ 3 mM, leading to the production of spherical and pseudo-spherical nanoparticles. The biosynthesized AuNPs possessed excellent catalytic activities for the reduction of 2-nitrophenol, 3-nitrophenol, 4-nitrophenol, o-nitroaniline and m-nitroaniline in the presence of NaBH₄, and the catalytic rate constants were calculated to be 6.3×10⁻³ s⁻¹, 5.5×10⁻³ s⁻¹, 10.6×10⁻³ s⁻¹, 8.4×10⁻³ s⁻¹ and 13.8×10⁻³ s⁻¹, respectively. The AuNPs were also able to catalyze the decolorization of various azo dyes (e.g. Cationic Red X-GRL, Acid Orange II and Acid scarlet GR) using NaBH₄ as the reductant, and the decolorization rates reached 91.0–96.4% within 7 min. The present study should provide a potential candidate for green synthesis of AuNPs, which could serve as efficient catalysts for aromatic pollutants degradation.     

Phyllanthin-assisted biosynthesis of silver and gold nanoparticles: a novel biological approach

Abstract  The anisotropic gold and spherical–quasi-spherical silver nanoparticles (NPs) were synthesized by reducing aqueous chloroauric acid (HAuCl₄) and silver nitrate (AgNO₃) solution with the extract of phyllanthin at room temperature. The rate of reduction of HAuCl₄ is greater than the AgNO₃ at constant amount of phyllanthin extract. The size and shape of the NPs can be controlled by varying the concentration of phyllanthin extract and thereby to tune their optical properties in the near-infrared region of the electromagnetic spectrum. The case of low concentration of extract with HAuCl₄ offers slow reduction rate along with the aid of electron-donating group containing extract leads to formation of hexagonal- or triangular-shaped gold NPs. Transmission electron microscopy (TEM) analysis revealed that the shape changes on the gold NPs from hexagonal to spherical particles with increasing initial concentration of phyllanthin extract. The Fourier transform infrared spectroscopy and thermogravimetric analyses reveal that the interaction between NPs and phyllanthin extract. The cyclic voltammograms of silver and gold NPs confirms the conversion of higher oxidation state to zero oxidation state. Graphical abstract  Anisotropic gold and silver nanoparticles were synthesized by a simple procedure using phyllanthin extract as reducing agent. The rate of bioreduction of AgNO₃ is lower than the HAuCl₄ at constant concentration of phyllanthin extract. The required size of the nanoparticles can be prepared by varying the concentration of phyllanthin with AgNO₃ and HAuCl₄.      

Comparing the interparticle coupling effect on sensitivities of silver and gold nanoparticles

The wavelength shift of surface plasmon resonance peak resulting from the electromagnetic coupling noble metal nanoparticle increases with the increase in the dielectric constant of the medium and the decrease in the interparticle separation distance. In this work, the discrete dipole approximation method was used to calculate the extinction efficiency spectra of the silver–silver and gold–gold nanoparticle pairs. This work shows that the silver coupled-particle system has higher plasmon resonance sensitivity as compared to the gold coupled-particle system. However, the silver coupled-particle system has lower and a faster near-exponential decay of sensitivity enhancement factor than the gold coupled-particle system. Thus, the silver coupled-particle may be more suited for sensing applications as compared to the gold coupled-particle, but the interparticle coupling effect displays more pronounced effect on the gold coupled-particle system as compared to the silver coupled-particle system.     

Concentration of energy inside laser-irradiated gold and silver plasmon nanoparticles in air

We simulated laser-intensity distribution inside spherical gold and silver nanoparticles with radii between 10 and 100 nm, which are exposed to laser radiation at 400, 532, and 800 nm in air, and analyzed the results. The effect of high energy concentration inside illuminated (front) and shadowed (back) hemispheres of gold and silver nanoparticles is established for several nanoparticle sizes and laser wavelengths. The results can be used in nanophotonics of new plasmon devices (concentrators, antennas, etc.) and photon components.     

金/银纳米颗粒对Eu掺杂薄膜发光特性影响的研究

本文将三种金属纳米颗粒(球形银纳米颗粒、三角形银纳米薄片和三角形金纳米薄片)分别置于Eu(TTFA)3掺杂的Su8薄膜上研究了它们对铕配合物薄膜发光的影响.结果显示,金属纳米颗粒的局域等离子体共振(LSPR)谱对薄膜发光有很好的调控作用.对于LSPR谱分别与铕配合物激发谱和辐射谱重叠较好的球形和三角形两种银颗粒,相比于未放置颗粒时薄膜的发光,放置有颗粒的发光有明显的增强,其中球形银颗粒的样品的发光增强效果更为明显.而对于LSPR谱与铕配合物激发谱和辐射谱都不重叠的三角形片状金颗粒,该颗粒对样品的发光则起到了猝灭作用.     

Fabrication of gold nanoparticles in water by laser ablation technique and their characterization

A colloidal solution of gold nanoparticles in deionized nanopure water was produced by laser ablation technique without the use of any chemical/surfactant. Spectral characterization and morphological studies of these nanoparticles were carried out by UV-Vis Spectroscopy and Scanning Electron Microscopy, respectively. A number of variables of the ablating laser pulse have been used to control the size of the fabricated nanoparticles. Excellent correlation between ablating laser pulse parameter and optical and morphological parameters of the gold colloids were obtained. The peak of the extinction spectra shows a monotonic blue shift for laser fluence of 410 J/cm² and above. Below this the extinction peak remains fairly constant in wavelength. Blue shifts of the extinction spectra were also observed with increasing re-ablation time of previously ablated gold colloids. Possible explanations of all these observations are discussed.     

Sensitive surface-enhanced Raman scattering substrates based on anti-pyramidal gold architectures decorated with silver nanoparticles

Abstract

A micro-structured gold surface, consisting of a periodic square–based anti–pyramidal array (Klarite) with a smooth boundary surface on which silver nanoparticles (diameter: 60?nm) were deposited, produced an active surface enhanced Raman scattering substrate. With p-aminothiophenol as a probe molecule, the Raman activity of the micro–structured surface was compared before and after deposition of the silver nanoparticles. Experimental results show that the Raman spectra on the silver/p-aminothiophenol/Klarite structure is stronger than that on the silver/p-aminothiophenol/gold film and the Raman spectra on the silver/p-aminothiophenol/gold film is stronger than that on silver/p-aminothiophenol, p-aminothiophenol/Klarite structure, p-aminothiophenol/gold film, which is confirmed by numerical simulations. A similar result is obtained with crystal violet as test molecule.     

Holes drilling in gold and silver decahedral nanoparticles by the convergent beam electron diffraction electron beam

The 200?kV focused electron beam in the convergent beam electron diffraction patterns mode in a transmission electron microscope (TEM) with field emission gun is able to drill holes in gold and silver decahedral nanoparticles. However, although they are done under the same circumstances, the holes are shapeless in the silver and faceted in gold nanoparticles. In addition to this, the holes are closed during their high-resolution TEM observation in both materials. To comment their differences, displacement energy considerations are taken into account as function of the sputtering energy in order to modify the displacement cross-section of the processes.     

In-situ formation of silver nanoparticles stabilized by amphiphilic star-shaped copolymer and their catalytic application

Silver nanoparticles (Ag NPs) were prepared via in situ reduction of silver nitrate (AgNO₃) using polymeric micelles as nanoreactors without any additional reductant. The micelles were constructed from the amphiphilic star-shaped copolymer composed of poly(?-caprolactone) (PCL) segment, 2-(dimethylamino)ethyl methacrylate (DMAEMA or DMA) units and oligo(ethylene glycol)monomethyl ether methacrylate (OEGMA or OEG) units. The Ag NPs stabilized by those star-shaped copolymers were characterized using UV-vis spectrum, DLS, TEM and FTIR. It confirmed that PDMAEMA exhibited the reducing property unless pH was above 7. The Ag NPs were sphere-like with a diameter of 10-20 nm, which was independent of the architecture of the copolymer and AgNO₃ concentration. Furthermore, the catalytic activity of these Ag NPs was investigated by monitoring the reduction of p-nitrophenol (4-NP) by NaBH₄. The result showed that the Ag NPs formed by coordination reduction can be effectively applied in catalytic reaction.     

Preparation of three-dimensional leaflike cobalt microcrystals and decoration of their surface with silver nanoparticles

Three-dimensional leaflike metallic cobalt microcrystals with radiating arrangement from each individual centers were successfully synthesized via a hydrothermal reduction approach. Time-dependent experiments were carried out to verify the rational growth mechanism of the obtained leaflike products, in which a morphology transformation from cobalt hydroxide hexagonal nanoplates to dendritic cobalt crystals and end with leaflike cobalt products was observed. Structure characterizations suggest that this transformation is associated with diffraction-limited aggregation, oriented attachment, and Ostwald ripening. XRD measurement indicates that the cobalt products exhibit a combination of hexagonal-close-packed (hcp) and face-centered-cubic (fcc) crystalline character. The products exhibit a remarkable enhanced coercivity of 193.8 Oe compared against bulk cobalt due to the shape anisotropy and hcp crystalline structure. The effect of different solvents on morphological and magnetic properties of the product was also validated. These leaflike cobalt crystals were further used as substrates to decorate their surface with Ag nanoparticles by transmetallation reaction. These Ag-modified cobalt leaves could have the potential application value in fields of magnetically recyclable catalysts and antibacterial materials.     

Nanoporous carbon spheres and their application in dispersing silver nanoparticles

Monodisperse nanoporous carbon spheres (NCS) were synthesized in large quantities via a facile hydrothermal synthesis. It is found that the NCS have rough surfaces with a large quantity of uniformly distributed protruding and concaving zones. Large quantities of nanopores of about 0.3 nm in diameter are distributed uniformly on the whole sphere surfaces. The effects of reaction parameters on the surface roughness, sphere diameter and pore size of NCS were investigated. Taking the NCS as substrates, silver nanoparticles (NPs) were deposited onto their surfaces using a one-step ultrasonic electrodeposition procedure. The deposited silver NP has a uniform distribution, a high particle density and a narrow size range of 12-16 nm in diameter. This study demonstrates an efficient approach to fabricate noble-metal/carbon nanocomposites.