Thermal conductivity enhancement of MWNTs on the PANI/tetradecanol form-stable PCM

We prepared PANI/tetradecanol/MWNTs composites via in-situ polymerization. DSC results indicated that the composites are good form-stable phase change materials (PCMs) with large phase change enthalpy of 115 J g⁻¹. The MWNTs were randomly dispersed in the composites and significantly enhanced the thermal conductivity of the PCMs from 0.33 to 0.43 W m⁻¹ K⁻¹. The form-stable PCMs won’t liquefy even it is heated at 80°C, so that the MWNTs were fixed in the composite and the phase separation of the MWNTs from PANI/tetradecanol/MWNTs composites won’t occur.     

Preparation and thermal properties of palmitic acid/polyaniline/copper nanowires form-stable phase change materials

Form-stable phase change materials (PCMs) with high thermal conductivity are essential for thermal energy storage systems, which in turn are indispensible in solar thermal energy applications and efficient use of energy. In this paper, a new palmitic acid (PA)/polyaniline (PANI) form-stable PCMs were prepared by surface polymerization. The highest loading of PA in the form-stable PCMs was 80 mass% with the phase change enthalpy (ΔH _melting) of 175 J g^?1. Copper nanowires (Cu NWs) were introduced to the form-stable PCM by mixing the Cu NWs with PA and ethanol prior to the emulsifying of PA in surfactant solution. The Cu NWs would remain intact in case the ethanol was eliminated before the PA/Cu NWs mixture was mixed with surfactant solution. Otherwise, the Cu NWs would be partially oxidized under the attack of ethanol and ammonium persulfate. The ΔH _melting of the form-stable PCMs containing Cu NWs decreased linearly with the increasing of Cu NWs loading. The ΔH _melting of the form-stable PCMs doped with 11.2 mass% Cu NWs was 149 J g^?1. The thermal conductivity of the form-stable PCMs could be effectively improved by Cu NWs. By adding 11.2 mass% Cu NWs, the thermal conductivity of the form-stable PCM could attain 0.455 W m^?1 K^?1.     

Study of a PCM based energy storage system containing Ag nanoparticles

In this paper, organic phase change materials (PCM)/Ag nanoparticles composite materials were prepared and characterized for the first time. The effect of Ag nanoparticles on the thermal conductivity of PCM was investigated. 1-tetradecanol (TD) was selected as a PCM. A series of nano-Ag-TD composite materials in aqueous solution were in-situ synthesized and characterized by means of thermal conductivity evaluation method, TG-DSC, IR, XRD and TEM. The results showed that the thermal conductivity of the composite material was enhanced as the loading of Ag nanoparticles increased. The composite materials still had relatively large phase change enthalpy. Their phase change enthalpy could be correlated linearly with the loading of TD, but their phase change temperature was a little bite lower than that of pure TD. The thermal stability of the composite materials was close to that of pure TD. It appeared that there was no strong interaction between the Ag nanoparticles and the TD. Furthermore, the experiment results indicated that the Ag nanoparticles dispersed uniformly in the materials, occurred in the forms of pure metal.     

Characterization of form-stable phase-change material for solar photovoltaic cooling

Solar PV panel cooling is essential to achieve maximum efficiency of PV modules. Phase-change material (PCM) is one of the prominent options to cool the panel and reduce the temperature, since PCMs have low thermal conductivity. Expanded graphite particles are used to enrich the structure and stability as well as to increase the thermal properties. In the present research work, polyethylene glycol (PEG) 1000 is used as a base material and expanded graphite for inclusive particle. A novel form-stable PEG1000/EG composite PCM mixture is prepared, using impregnation and dispersion method. Expanded graphite and PEG1000/EG sample phase compositions are investigated, using X-ray diffraction technique. No new peak is identified in the composite PCM sample. The surface morphology and structure of EG and PEG1000/EG are investigated, using scanning electron microscopy (SEM). Chemical stability analysis is done by Fourier-transform infrared spectroscopy. Thermal properties of the prepared composite PCMs are analysed by differential scanning calorimetry, thermogravimetric analysis (TGA) and KD2 pro analyser. Results show that addition of EG in various propositions (5%, 10% and 15%) enhances the thermal conductivity of PCM samples from 0.3654 to 1.7866 W mK^?1, while melting point and latent heat of fusion of PCM samples are getting reduced. TGA thermographs are used to investigate the thermal stability of the composite PCM samples. TGA curves show that loss of mass happens above the operating temperature, and it is varied with different mass ratios of EG. Characterization of the prepared composite PCM samples is compared and found that PEG1000-85%/EG-15% is the best form-stable PCM, suitable for cooling the solar PV panel as well as to improve the electrical efficiency coupled with a decrease of temperature in the range of 35 °C to 40 °C.

     

Thermal analysis study of LiFeO<Subscript>2</Subscript> formation from Li<Subscript>2</Subscript>CO<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> mechanically activated reagents

Series of n-octadecane/expanded graphite composite phase-change materials (PCMs) with different mass ratio were prepared using n-octadecane as PCMs, expanded graphite as multi-porous supporting matrix through vacuum impregnation method. Microstructure, crystallization properties, energy storage behavior, thermal cycling property and intelligent temperature-control performance of the composite PCMs were investigated. Results show that the composite PCMs have a good energy storage property. The melting enthalpy and crystallization enthalpy can reach 164.85 and 176.51 J g^?1, respectively. Furthermore, the good thermal conductivity of expanded graphite reduces the super-cooling degree of n-octadecane and endows the composite PCMs with fast thermal response rate and excellent thermal cycling stability. As a result, the phase-change temperatures and phase-change enthalpy almost have no change after 50 thermal-cooling cycles. The test of intelligent temperature-control performance shows that the electronic radiator filled with the composite PCMs possesses a high intelligent temperature-control performance, and its temperature can sustain in the range of 22–27.5 °C for about 6120 s. These results indicate that the prepared composite PCMs possess good comprehensive property and can be widely used in energy storage and thermal management systems.     

One-step synthesis of CuS-decorated MWCNTs/paraffin composite phase change materials and their light–heat conversion performance

Paraffin wax (PW) is a solid–liquid organic phase change material (PCM). However, the low thermal conductivity and poor light–heat conversion performance limit its feasibility in solar thermal storage applications. In this paper, CuS-decorated carboxyl multi-wall carbon nanotubes (MWCNTs)/PW light–heat conversion composite PCMs were prepared by one step. The structure and properties of the composite PCMs were studied by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, differential scanning calorimeter, thermogravimetric analysis, coefficient of thermal conductivity, UV–visible–near infrared spectrometer and light–heat conversion testing. The results showed that the light–heat conversion performance of CuS–MWCNTs/PW composite PCMs were better than that of MWCNT/PW composite PCMs with the same mass fraction. Therefore, it is expected that this research will open up new avenues of study for the creation of advanced composite PCM with excellent light–heat conversion performance.     

CaCl2·6H2O/Expanded graphite composite as form-stable phase change materials for thermal energy storage

In this study, CaCl₂·6H₂O/expanded graphite (EG) composite was prepared as a novel form-stable composite phase change material (PCM) through vacuum impregnation method. CaCl₂·6H₂O used as the PCM was dispersed by surfactant and then, was absorbed into the porous structure of the EG. The surfactant was used to enhance the bonding energy between CaCl₂·6H₂O and EG, which fulfilled the composites with good sealing performance and limited the leakage of the inside CaCl₂·6H₂O. Differential scanning calorimetry and thermal gravimetric analysis show that all the composite PCMs possess good thermal energy storage behavior and thermal stability. Thermal conductivity measurement displays that the conductivities of the samples have been significantly improved due to the highly thermal conductive EG. The thermal conductivity of the sample including 50 mass% CaCl₂·6H₂O (8.796 W m^?1 K^?1) is 14 times as that of pure CaCl₂·6H₂O (0.596 W m^?1 K^?1). Therefore, the obtained composite PCMs are promising for thermal energy storage applications.     

Enhanced electrochemical properties of polyethylene oxide-based composite solid polymer electrolytes with porous inorganic–organic hybrid polyphosphazene nanotubes as fillers

Solid composite polymer electrolytes consisting of polyethylene oxide (PEO), LiClO₄, and porous inorganic–organic hybrid poly (cyclotriphosphazene-co-4, 4′-sulfonyldiphenol) (PZS) nanotubes were prepared using the solvent casting method. Differential scanning calorimetry and scanning electron microscopy were used to determine the characteristics of the composite polymer electrolytes. The ionic conductivity, lithium ion transference number, and electrochemical stability window can be enhanced after the addition of PZS nanotubes. The electrochemical impedance showed that the conductivity was improved significantly. Maximum ionic conductivity values of 1.5 × 10⁻⁵ S cm⁻¹ at ambient temperature and 7.8 × 10⁻⁴ S cm⁻¹ at 80 °C were obtained with 10 wt.% content of PZS nanotubes, and the lithium ion transference number was 0.35. The good electrochemical properties of the solid-state composite polymer electrolytes suggested that the porous inorganic–organic hybrid polyphosphazene nanotubes had a promising use as fillers in SPEs and the PEO₁₀–LiClO₄–PZS nanotube solid composite polymer electrolyte might be used as a candidate material for lithium polymer batteries.     

Platelike CoO/carbon nanofiber composite electrode with improved electrochemical performance for lithium ion batteries

Platelike CoO/carbon nanofiber (CNF) composite materials with porous structures are synthesized from the thermal decomposition and recrystallization of β-Co(OH)₂/CNF precursor without the need for a template or structure-directing agent. As negative electrode materials for lithium-ion batteries, the platelike CoO/CNF composite delivers a high reversible capacity of 700 mAh g⁻¹ for a life extending over hundreds of cycles at a constant current density of 200 mA g⁻¹. More importantly, the composite electrode shows significantly improved rate capability and electrochemical reversibility. Even at a current of 2 C, the platelike CoO/CNF composite maintain a capacity of 580 mAh g⁻¹ after 50 discharge/charge cycles. The improved cycling stability and rate capability of the CoO/CNF composite electrodes may be attributed to synergistic effect of the porous structural stability and improved conductivity through CNF connection.     

Study on thermal properties of organic ester phase-change material embedded with silver nanoparticles

This study investigates the thermal properties of new silver nano-based organic ester (SNOE) phase-change material (PCM) in terms of latent heat capacity, thermal conductivity and heat storage and release capabilities experimentally. Spherical-shaped surface-functionalized crystalline silver nanoparticles (AgNP) prepared were embedded in mass proportions of 0.1 through 5.0 wt% into the pure (base) PCM. Experimental results reveal that dispersion of AgNP into PCM was effective, only physical and no chemical interaction between AgNP and PCM has been exhibited; thereby phase-change temperature of SNOE PCMs were acceptable. These are essential characteristics for SNOE PCMs which signified their thermal and chemical stability on long term. Test results suggest that while compared to pure PCM, degree of supercooling was reduced by 11.7–6.8 % for aforesaid mass proportions of AgNP, whereas latent heat capacities decreased by 7.88 % in freezing and 8.91 % in melting. The interdependencies between thermophysical properties in improving nucleation and growth rate of stable SNOE PCM crystals were signified and discussed. Thermal conductivity of SNOE PCMs were enhanced from 0.284 to 0.765 W m^?1 K^?1 which was expected to be a 10–67 % increase for the above mass loading of AgNP. Furthermore, for SNOE PCMs enhancement span in freezing and melting cycles was improved by 41 and 45.6 %, respectively. Similarly, cooling and melting times were reduced by 30.8 and 11.3 %, respectively. Embedded AgNP helps to achieve improved thermophysical and heat storage characteristics for SNOE PCMs, which in turn can be considered as a potential candidate for cool thermal energy storage applications.     

Preparation and thermal properties of fatty acids/CNTs composite as shape-stabilized phase change materials

A series of fatty acids/carbon nanotubes (CNTs) composite shape-stabilized PCMs were prepared through infiltration method by using the eutectic mixture of capric acid, lauric acid, and palmitic acid as phase change materials, multi-walled CNTs as a supporting material. Nitrogen adsorption–desorption curves and SEM images of composite shape-stabilized PCMs indicate that the eutectic mixture was effectively absorbed into the porous structure of the CNTs. DSC thermograms show that the composite fatty acids/CNTs possess good phase change behavior. And the latent heat of the sample absorbed with 80 wt% fatty acids can achieve 101.6 J g^?1 in the melting process and its phase change temperatures and latent heat almost remain unchanged in 30 times of thermal cycling. Moreover, the thermal conductivity of the composite materials are significantly improved (up to 0.6661 W m^?1 k^?1) due to the addition of the highly thermal conductive CNTs.     

Preparation and characterization of form-stable tetradecanol–palmitic acid expanded perlite composites containing carbon fiber for thermal energy storage

In this study, tetradecanol–palmitic acid/expanded perlite composites containing carbon fiber (TD-PA/EP-CF CPCMs) were prepared by a vacuum impregnation method. Binary eutectic mixtures of PA and TD were utilized as thermal energy storage material in the composites, where EP behaved as supporting material. X-ray diffraction demonstrated that crystal structures of PA, TD, EP, and CF remained unchanged, confirming no chemical interactions among raw materials besides physical combinations. The microstructures indicated that TD-PA was sufficiently absorbed into EP porous structure, forming no leakage even in molten state. Differential scanning calorimetry estimated the melting temperature of TD-PA/EP-CF CPCM to 33.6 °C, with high phase change latent heat (PCLH) of 138.3 kJ kg⁻¹. Also, the freezing temperature was estimated at 29.7 °C, with PCLH of 137.5 kJ kg⁻¹. The thermal cycling measurements showed that PCM composite had adequate stability even after 200 melting/freezing cycles. Moreover, the thermal conductivity enhanced from 0.48 to 1.081 W m⁻¹ K⁻¹ in the presence of CF. Overall, the proposed CPCMs look promising materials for future applications due to their appropriate phase change temperature, elevated PCLH, and better thermal stability.

     

Thermal energy storage behavior of composite using hybrid nanomaterials as PCM for solar heating systems

In this study, thermal and heat transfer characteristics of the newly prepared composite as phase change material (PCM) comprising paraffin and hybrid nanomaterials (50 % CuO–50 % TiO₂) have been investigated for solar heating systems. Composite PCMs with 0.25, 0.5, 0.75, and 1.0 mass% of hybrid nanomaterials were prepared individually for assessing their better performances than paraffin alone. Sodium dodecylbenzene sulfonate (SDBS) was preferred as the surfactant to ensure the dispersion stability of the nanomaterials in the paraffin and mass fraction of SDBS was 1.2 times of the mass fraction of hybrid nanomaterials in the paraffin. The thermal properties of the composite PCMs were determined by differential scanning calorimetry in terms of mass fractions of hybrid nanomaterials and number of thermal cycles. The thermal stabilities of the paraffin and composite PCMs were tested by thermogravimetric analyzer. The thermal conductivity and viscosity of the paraffin due to the addition of various mass fractions of CuO, TiO₂, and hybrid nanomaterials were determined by LFA 447 NanoFlash analyzer and Brookfield DV-III Ultra programmable rheometer, respectively. The experimental results proved that the heating and cooling rates of composite PCMs were faster due to the dispersion of hybrid nanomaterials. For composite PCM with 1.0 mass% of hybrid nanomaterials, the melting and freezing times were reduced by 29.8 and 27.7 %, respectively, as compared with the paraffin.     

Thermo-optic characteristics in transparent glass fabric reinforced composite using inorganic–organic hybrid materials

The thermo-optic characteristics of the transparent glass fabric composite and matrix resin have been investigated. The inorganic–organic hybrid materials modified with sulfur are synthesized as transparent matrix resin with the same refractive index and Abbe number as glass. The optical characteristics of the transparent composite relate to temperature due to the fact that the thermo-optic coefficient (dn/dT) for glass fiber (1.00 × 10⁻⁵K⁻¹) is different to that of inorganic–organic hybrid materials (−1.99 × 10⁻⁴K⁻¹). As the temperature increases, the transparent composite gradually becomes opaque and hazy due to the increased difference in the refractive index between the glass fiber and the matrix. The change in optical characteristics is reversible, meaning that the transparent composites can be used in for various applications in optical devices.     

Preparation,characterization, and thermal properties of microPCMs containing <Emphasis Type="Italic">n</Emphasis>-dodecanol by using different types of styrene-maleic anhydride as emulsifier

Microcapsules containing polar phase change material (PCM) n-dodecanol were synthesized by in situ polymerization using melamine-formaldehyde resin as shell and styrene-maleic anhydride copolymer (SMA) as emulsifier. The effects of polarity of PCM and types and amounts of SMA emulsifier on the properties of microencapsulated PCMs (microPCMs) were studied and characterized by using Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry, thermogravimetric analysis, and laser particle diameter analyzer. The results show that thermal properties of microPCMs are affected greatly by the types and amounts of SMA. Anionic SMA emulsifier is suitable for the encapsulation of n-dodecanol. The polarity of PCM leads to the higher adding amount of SMA emulsifier. When mass ratio of emulsifier to n-dodecanol is 4.8%, the phase change latent heat and encapsulation efficiency reach to the maximum value of 187.5 J/g and 93.1%, respectively. Irregular spherical microPCMs with mean diameter of 30.6 μm and phase change temperature of 21.5 °C are obtained and can be used for energy storage.     

A polymer electrolyte containing ionic liquid for possible applications in photoelectrochemical solar cells

Various iodide ion conducting polymer electrolytes have been studied as candidate materials for fabricating photoelectrochemical (PEC) solar cells and energy storage devices. In this study, enhanced ionic conductivity values were obtained for the ionic liquid tetrahexylammonium iodide containing polyethylene oxide (PEO)-based plasticized electrolytes. The analysis of thermal properties revealed the existence of two phases in the electrolyte, and the conductivity measurements showed a marked conductivity enhancement during the melting of the plasticizer-rich phase of the electrolyte. Annealed electrolyte samples showed better conductivity than nonannealed samples, revealing the existence of hysteresis. The optimum conductivity was shown for the electrolytes with PEO:salt = 100:15 mass ratio, and this sample exhibited the minimum glass transition temperature of 72.2 °C. For this optimum PEO to salt ratio, the conductivity of nonannealed electrolyte was 4.4 × 10⁻⁴ S cm⁻¹ and that of the annealed sample was 4.6 × 10⁻⁴ S cm⁻¹ at 30 °C. An all solid PEC solar cell was fabricated using this annealed electrolyte. The short circuit current density (I _SC), the open circuit voltage (V _OC), and the power conversion efficiency of the cell are 0.63 mA cm⁻², 0.76 V, and 0.47% under the irradiation of 600 W m⁻² light.     

高结构稳定性、低泄漏率三维铜@石墨烯复合相变材料的制备

由于能源消费需求的持续增长和传统化学燃料的日益枯竭,对可再生能源的需求日益迫切。以地热能、太阳能为代表的可再生能源脱颖而出。然而,这些能源的应用易受到天气、季节、地点和时间的影响,具有不稳定性、随机性、波动性和间歇性。储能技术是解决上述问题的有效途径,它可以在需要的时候储存或释放能量。在各种储能技术可选材料中,相变材料(PCMs)是智能热能管理和便携式热能领域的有力候选者。大多数相变材料都存在导热系数低、环境污染、熔点泄漏等问题,因此有必要将相变材料封装到支撑骨架材料中。事实上,支撑材料在应用中仍面临着一些重大挑战。首先,骨架材料应能抵抗相变材料在相变过程中的体积变化,即具有良好的结构稳定性。其次,还应具有较高的导热系数和较低的泄漏率。石墨烯气凝胶(GA)已被证明是提高相变材料形状稳定性的有效支撑骨架,但相变引起的泄漏和网络结构的脆性是制约其应用的关键问题。在此,我们提出了一种双脉冲电镀的强化策略,用于制备铜@石墨烯气凝胶(Cu@GA)作为相变储能骨架材料。这一结构设计中,石墨烯气凝胶上的石墨烯片层上均匀地镀上了铜层,且不同片之间被铜镀层所连接。这种铜增强石墨烯气凝胶网络结构赋予复合材料良好的导热性和坚固的骨架稳定性,有利于增强相变换热和抑制相变过程中的泄漏。此外,通过真空浸渍法将十八胺(ODA)封装在Cu@GA骨架中,获得了结构稳定性高、泄漏率低的复合相变材料(Cu@GA/ODA),保证了ODA在Cu@GA骨架材料中的均匀分散和填充。通过比较复合相变材料的重量变化,研究了不同骨架对复合相变材料泄漏率的影响。优化后的复合相变材料(CPCM)Cu@GA/ODA经20次储热、放热循环后,泄漏率降低至19.82% (w,质量分数),而GA/ODA和GOA/ODA为骨架的复合相变材料的泄漏率分别为80.31% (w)和72.99% (w)。为了探讨这种影响的原因,用扫描电子显微镜(SEM)观察了循环后骨架的形貌。铜/石墨烯气凝胶(Cu@GA)骨架材料没有明显的收缩或坍塌,仍可以保持完整的三维网络结构,而氧化石墨烯气凝胶(GOA)和石墨烯气凝胶(GA)的骨架材料三维结构不复存在,且在氧化石墨烯/石墨烯片能够观察到明显的裂隙。铜涂层可以提高骨架的微观结构稳定性,有利于提高结构稳定性,降低复合材料的泄漏率。同时,该研究为构建理想的金属增强石墨烯气凝胶复合骨架材料铺平了新的道路,该复合材料具有优异的综合性能,可用于未来的相变储能、多孔微波吸收和储能应用。     

Electrical conductivity studies on some dibenzoylmethane arylhydrazones (DBMAH)

Electrical conductivity of some dibenzoylmethane arylhydrazones (DBMAH) were measured during heating and reheating runs. The observed variation of the conductance of the polycrystalline sample during thermal agitation was found to depend on the ordering and disordering of molecules which in turn cause the lattice dipole to distort. A semiconducting behavior was detected for these systems as it was deduced from their conductance values (1.7 × 10⁻⁶ − 8.25 × 10⁻⁷ ohm⁻¹ cm⁻¹). The presence of substituents affects markedly the measured electrical conductivity and calculated activation energy values.     

Fabrication and characterization of P(VDF-HFP)/SBA-15 composite membranes for Li-ion batteries

This study reports on the preparation of a composite polymer electrolyte for secondary lithium-ion battery. Poly(vinylidiene fluoride-hexafluoropropylene) (P(VDF-HFP)) was used as the polymer host, and mesoporous SBA-15 (silica) ceramic fillers used as the solid plasticizer were added into the polymer matrix. The SBA-15 fillers with mesoporous structure and high specific surface can trap more liquid electrolytes to enhance the ionic conductivity. The ionic conductivity of P(VDF-HFP)/SBA-15 composite polymer electrolytes was in the order of 10⁻³ S cm⁻¹ at room temperature. The characteristic properties of the composite polymer membranes were examined by using FTIR spectroscopies, scanning electron microscopy (SEM), and an AC impedance method. For comparison, the LiFePO₄/Li composite batteries with a conventional microporous polyethylene (PE) separator and pure P(VDF-HFP) polymer membrane were also prepared and studied. As a result, the LiFePO₄/Li composite battery comprised the P(VDF-HFP)/10 wt.% m-SBA-15 composite polymer electrolyte, which achieves an optimal discharge capacity of 88 mAh g⁻¹ at 20 C rate with a high coulomb efficiency of 95%. It is demonstrated that the P(VDF-HFP)/m-SBA-15 composite membrane exhibits as a good candidate for application to LiFePO₄ polymer batteries.     

Magnesium ion-conducting gel polymer electrolytes dispersed with fumed silica for rechargeable magnesium battery application

Effect of fumed silica dispersion on poly(vinylidene fluoride-co-hexafluoropropylene)-based magnesium ion-conducting gel polymer electrolyte has been studied using various physical and electrochemical techniques. The composite gel electrolytes are free-standing and flexible films with enough mechanical strength. The optimized composition with 3 wt.% filler offers a maximum ionic conductivity of ∼1.1 × 10⁻² S cm⁻¹ at ∼25 °C with good thermal and electrochemical stabilities. The Mg²⁺ ion conduction in the gel nanocomposite film is confirmed from the cyclic voltammetry, impedance spectroscopy, and transport number measurements. The space-charge layers formed between filler particles and gel electrolyte are responsible for the enhancement in ionic conductivity. The applicability of the gel nanocomposite to a rechargeable battery is examined by fabricating a prototype cell consisting of Mg [or Mg-multiwalled carbon nanotube (MWCNT) composite] and MoO₃ as negative and positive electrodes, respectively. The discharge capacity and the rechargeability of the cell have been improved when Mg metal is substituted by Mg-MWCNT composite. The discharge capacity of the optimized cell has found to be ∼175 mAh g⁻¹ of MoO₃ for an initial ten charge–discharge cycles.