Encapsulation of carbon nanotubes by self-assembling peptide amphiphiles

We demonstrate the dispersion and noncovalent functionalization of carbon nanotubes in water using peptide amphiphiles each consisting of a short hydrophobic alkyl tail coupled to a more hydrophilic peptide sequence. The assembly of peptide amphiphile molecules on the surfaces of carbon nanotubes adds biofunctionality to these one-dimensional conductors and simultaneously eliminates the hydrophobic nanotube-water interface, thus dispersing them in the aqueous medium. This should occur without the degradation of their structural, electronic, and optical properties caused by covalent functionalization and without the need for specific peptide sequences designed to bind with nanotube surfaces. The encapsulation by peptide amphiphiles is confirmed using transmission electron microscopy and optical absorbance spectroscopy and may have significant future applications in biosensing or medicine.     

Overcoming the insolubility of carbon nanotubes through high degrees of sidewall functionalization

The use of carbon nanotubes in materials applications has been slowed due to nanotube insolubility and their incompatibility with polymers. We recently developed two protocols to overcome the insoluble nature of carbon nanotubes by affixing large amounts of addends to the nanotube sidewalls. Both processes involve reactions with aryl diazonium species. First, solvent-free functionalization techniques remove the need for any solvent during the functionalization step. This delivers functionalized carbon nanotubes with increased solubility in organic solvents and processibility in polymeric blends. Additionally, the solvent-free functionalization process can be done on large scales, thereby paving the way for use in bulk applications such as in structural materials development. The second methodology involves the functionalization of carbon nanotubes that are first dispersed as individual tubes in surfactants within aqueous media. The functionalization then ensues to afford heavily functionalized nanotubes that do not re-rope. They remain as individuals in organic solvents giving enormous increases in solubility. This protocol yields the highest degree of functionalization we have obtained thus far-up to one in nine carbon atoms on the nanotube has an organic addend. The proper characterization and solubility determinations on nanotubes are critical; therefore, this topic is discussed in detail.     

Separation of semiconducting from metallic carbon nanotubes by selective functionalization with azomethine ylides

A mild and efficient method for the functionalization of SWNTs by cycloaddition of azomethine ylides derived from trialkylamine-N-oxides is described. Selective reaction of semiconducting carbon nanotubes was achieved by preorganizing the starting N-oxides on the nanotube surface prior to generating the reactive ylides. Separation of met-SWNTs from functionalized sem-SWNTs was successfully accomplished by inducing solubilization of sem-SWNTs in the presence of lignoceric acid.     

Lipid bilayers covalently anchored to carbon nanotubes

The unique physical and electrical properties of carbon nanotubes make them an exciting material for applications in various fields such as bioelectronics and biosensing. Due to the poor water solubility of carbon nanotubes, functionalization for such applications has been a challenge. Of particular need are functionalization methods for integrating carbon nanotubes with biomolecules and constructing novel hybrid nanostructures for bionanoelectronic applications. We present a novel method for the fabrication of dispersible, biocompatible carbon nanotube-based materials. Multiwalled carbon nanotubes (MWCNTs) are covalently modified with primary amine-bearing phospholipids in a carbodiimide-activated reaction. These modified carbon nanotubes have good dispersibility in nonpolar solvents. Fourier transform infrared (FTIR) spectroscopy shows peaks attributable to the formation of amide bonds between lipids and the nanotube surface. Simple sonication of lipid-modified nanotubes with other lipid molecules leads to the formation of a uniform lipid bilayer coating the nanotubes. These bilayer-coated nanotubes are highly dispersible and stable in aqueous solution. Confocal fluorescence microscopy shows labeled lipids on the surface of bilayer-modified nanotubes. Transmission electron microscopy (TEM) shows the morphology of dispersed bilayer-coated MWCNTs. Fluorescence quenching of lipid-coated MWCNTs confirms the bilayer configuration of the lipids on the nanotube surface, and fluorescence anisotropy measurements show that the bilayer is fluid above the gel-to-liquid transition temperature. The membrane protein α-hemolysin spontaneously inserts into the MWCNT-supported bilayer, confirming the biomimetic membrane structure. These biomimetic nanostructures are a promising platform for the integration of carbon nanotube-based materials with biomolecules.     

Rapid, one-pot synthesis of highly-soluble carbon nanotubes functionalized by L-arginine

Functionalization of carbon nanotubes (CNTs) is a necessary step to exploit their valuable properties. Due to having several steps and especially acid treatment, most of current methods of functionalization result in irrecoverable defects on CNTs structure. Here, multiwalled carbon nanotubes (MWCNTs) were functionalized with L-arginine in a simple, one-pot and rapid microwave-assisted technique without any acid treatment step. The CNT functionalities were analyzed with infrared spectroscopy, thermogravimetric analysis, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. The results confirmed the covalent functionalization of L-arginine with very low defects on CNTs. Also it is found that increase of input powers of microwave in the range 500–900 W, monotonically increase the degree of functionalization. The maximum dispersibility of MWCNT was found ～1.03 mg/mL corresponding to 900 W irradiation. Accounting considerable low treatment time, the method may be applied for large-scale solubilization of MWCNTs in an industrial scale.     

十八醇亲核取代反应修饰溴代多壁碳纳米管

Octadecanol modified multiple-walled carbon nanotubes, with octadecanol covalently bound to the nanotube surface, have been synthesized by bromination of the carbon nanotubes followed by nucleophilic substitution using octadecanol and sodium hydride. Scanning electron microscopy and transmission electron microscopy images show that the morphologies of the nanotubes are largely intact after functionalization. The brominated carbon nanotubes and octadecanol modified carbon nanotubes were characterized using energy-dispersive X-ray spectroscopy, Raman spectroscopy and Fourier transform infrared spectroscopy. The mechanism of nucleophilic substitution was discussed, and it is believed that the reaction occurs with an SN1 mechanism.     

Visible luminescence of carbon nanotubes and dependence on functionalization

Strong luminescence emissions over a broad wavelength region were detected from well-dispersed carbon nanotubes in most functionalized samples, even with excitation wavelengths into the near-IR. Apparently, the better dispersion and functionalization of the nanotubes resulted in more intense luminescence emissions. These emissions may logically be attributed to the trapping of excitation energy by defect sites in the nanotube structure, which are passivated upon the appropriate functionalization of the nanotubes. Better functionalization improves not only the nanotube dispersion (thus diminishing the quenching due to intertube interactions) but also the surface passivation to make the energy trapping sites more emissive, leading to stronger luminescence emissions. Because of such high sensitivity, the visible luminescence emissions may prove valuable in the evaluation of dispersion in functionalized carbon nanotube samples and related nanocomposite materials.     

A study of the stability of aqueous suspensions of functionalized carbon nanotubes

The properties of aqueous suspensions of carbon nanotubes have been studied as depending on the conditions of their functionalization in a mixture of sulfuric and nitric acids. The elemental composition and contents of carboxyl, lactone, and hydroxyl groups in carbon nanotubes have been determined at different durations and temperatures of functionalization. The influence of functionalization conditions on the value of the electrokinetic potential of carbon nanotubes in aqueous suspensions and the nanotube solubility in water has been investigated. It has been found that the absolute value of the electrokinetic potential of nanotubes and their solubility in water increase with both the duration and temperature of functionalization due to a rise in the number of functional groups on their surface. The optimal regimes of functionalization of carbon nanotubes have been determined from the point of view of preserving their structure and stability in aqueous dispersions.     

Polymer-masking for controlled functionalization of carbon nanotubes

An effective and versatile method for tube-length-specific functionalization of carbon nanotubes through a controllable embedment of vertically-aligned carbon nanotubes into polymer matrices is reported, which allows not only asymmetric functionalization of nanotube sidewalls, but also facile introduction of new properties (e.g. magnetic) onto the region-selectively functionalized carbon nanotubes.     

Solubilization of boron nitride nanotubes

A successful attempt in the functionalization and solubilization of boron nitride nanotubes is reported, and a functionalization mechanism based on interactions of amino functional groups with nanotube surface borons is proposed.     

Selective adsorption of proteins on single-wall carbon nanotubes by using a protective surfactant

The dispersion of highly hydrophobic carbon materials such as carbon nanotubes in biological media is a challenging issue. Indeed, the nonspecific adsorption of proteins occurs readily when the nanotubes are introduced in biological media; therefore, a methodology to control adsorption is in high demand. To address this issue, we developed a bifunctional linker derived from pyrene that selectively enables or prevents the adsorption of proteins on single-wall carbon nanotubes (SWNTs). We demonstrated that it is possible to decrease or completely suppress the adsorption of proteins on the nanotube sidewall by using proper functionalization (either covalent or noncovalent). By subsequently activating the functional groups on the nanotube derivatives, protein adsorption can be recovered and, therefore, controlled. Our approach is simple, straightforward, and potentially suitable for other biomolecules that contain thio or amino groups available for coupling.     

Covalent Functionalization of Single-Walled Carbon Nanotubes Through the Fluorination Stage for Integration into an Epoxy Composite

The upper limit of the elastic modulus has been estimated for a polymer–carbon nanotube–epoxy matrix nanocomposite. This limit can be achieved if the nanotubes are integrated into the matrix, i.e., they form a continuous reinforcing network inside the matrix, and if the nanotubes are single-walled or double-walled carbon nanotubes. A technique for carbon nanotube functionalization via fluorination and fluorine substitution and a technique for calculating the degree of nanotube functionalization based on reaction yield measurements are proposed. For fluorine substitution by epoxy-diane resin and diaminodiphenylmethane, the degree of functionalization is С–(FG)_x, x ~ 0.011–0.013 and the FG-molecular fragment containing the epoxy (amino) group corresponding to functionalization of ~5% of the surface С atoms of nanotubes. The control reaction showed that the epoxy groups preserve the chemical activity, while part of the amino groups are deactivated. The grafted epoxy(amino) groups ensure nanotube surface lyophilicity in epoxy composites and integrate the nanotubes into the epoxy matrix owing to the chemical bonds.     

Selective metallic tube reactivity in the solution-phase osmylation of single-walled carbon nanotubes

Single-walled carbon nanotubes have been reacted with osmium tetroxide (OsO(4)) in solution in the presence of O(2) and UV irradiation at 254 nm. We observe one main structural motif, namely thickly coated nanotube structures, densely covered with OsO(2), consisting of multiple bundles of derivatized tubes. In a few instances, bridging uncoated tubes, connecting these thickly coated structures, incorporate a number of smaller nanotube bundles, projecting out from the larger functionalized aggregates of tubes. It is believed that OsO(2) (a) initially forms on the nanotubes by the preferential covalent sidewall functionalization of metallic nanotubes and (b) subsequently self-aggregates. The formation of an intermediate charge-transfer complex is likely the basis for the observed selectivity and reactivity of metallic tubes. Extensive characterization of these osmylated adducts has been performed using a variety of electron microscopy and optical spectroscopy techniques.     

Carbon nanotube sidewall functionalization with carbonyl compounds--modified Birch conditions vs the organometallic reduction approach

Covalent addition reactions turned out to be one of the most important functionalization techniques for a structural alteration of single walled carbon nanotube (SWCNT) scaffolds. During the last years, several reaction sequences based on an electrophilic interception of intermediately generated SWCNT(n-) carbanions, obtained via Birch reduction or by a nucleophilic addition of organometallic species, have been developed. Nevertheless, the scope and the variety of potential electrophiles is limited due to the harsh reaction conditions requested for a covalent attachment of the functional entities onto the SWCNT framework. Herein, we present a significant modification of the reductive alkylation/arylation sequence, the so-called Billups reaction, which extends the portfolio of electrophiles for covalent sidewall functionalization to carbonyl compounds--ketones, esters, and even carboxylic acid chlorides. Moreover, these carbonyl-based electrophiles can also be used as secondary functionalization reagents for anionic SWCNT intermediates, derived from a primary nucleophilic addition step. This directly leads to the generation of mixed functional SWCNT architectures, equipped with hydroxyl or carbonyl anchor groups, suitable for ongoing derivatization reactions. A correlated absorption and emission spectroscopic study elucidates the influence of the covalent sidewall functionalization degree onto the excitonic transition features of carbon nanotubes. The characterization of the different SWCNT adducts has been carried out by means of Raman, UV-vis/nIR, and fluorescence spectroscopy as well as by thermogravimetric analysis combined with mass spectrometry and X-ray photoelectron spectroscopy analysis.     

Deuterium attachment to carbon nanotubes in deuterated water

A systematic investigation on the unusual attachment of labile deuterium to carbon nanotubes in deuterated water and alcohols is reported. The carbon nanotubes were solubilized through the established functionalization of the nanotube-bound carboxylic acids to allow solution-phase reaction and characterization. The deuterium attachment was found under several experimental conditions, including the use of deuterated ethanol as a co-reactant in the nanotube functionalization reaction and the refluxing of functionalized or simply purified carbon nanotubes in deuterated water and alcohols. The solubility of the functionalized carbon nanotube samples in common organic solvents and water allowed unambiguous (2)H NMR characterization. The reproducible broad (2)H NMR signal at approximately 6.5 ppm is assigned to carbon nanotube-attached deuterium species. The assignment is supported by the results from FT-IR measurements. The carbon-deuterium interaction is so strong that the corresponding vibration resembles the typical C-D stretching mode in the characteristic frequency region. The FT-IR peak intensities also correlate well with the (2)H NMR signal integrations in a series of samples. Mechanistic implications of the results are discussed.     

Effect of the electronic structure of carbon nanotubes on the selectivity of electrochemical functionalization

The functionalization of carbon nanotubes through electrochemical routes is gaining importance due to the high degree of control achievable and the ability to render the tubes with a variety of chemical and biological species. In this article, we report systematic investigations on the grafting of phenyl groups through diazonium coupling onto individual metallic and semiconducting carbon nanotubes both experimentally and theoretically. The results show clearly that by optimizing the electrochemical conditions it is possible to obtain a high degree of selectivity for the coupling of phenyl radicals onto metallic nanotubes. The outlined conclusions have strong implications for the design of strategies for the controlled functionalization of individual single-wall carbon nanotubes.     

Functionalization of single-wall carbon nanotubes by tandem high-pressure/Cr(CO)6 activation of Diels-Alder cycloaddition

An original method to induce Diels-Alder cycloadditions on carbon nanotubes is reported. The process is based on the double activation of the nanotube surface by combining high pressure and Cr(CO)6. This allows the efficient functionalization of carbon nanotubes by electron-rich dienes.     

Polymer structure and solvent effects on the selective dispersion of single-walled carbon nanotubes

Combinations of different aromatic polymers and organic solvents have been studied as dispersing agents for preparing single-walled carbon nanotubes solutions, using optical absorbance, photoluminescence-excitation mapping, computer modeling, and electron microscopic imaging to characterize the solutions. Both the polymer structure and solvent used strongly influence the dispersion of the nanotubes, leading in some cases to very high selectivity in terms of diameter and chiral angle. The highest selectivities are observed using toluene with the rigid polymers PFO-BT and PFO to suspend isolated nanotubes. The specific nanotube species selected are also dependent on the solvent used and can be adjusted by the use of THF or xylene. Where the structure has more flexible conformations, the polymers are shown to be less selective but show an enhanced overall solubilization of nanotube material. When chloroform is used as the solvent, there is a large increase in the overall solubilization, but the nanotubes are suspended as bundles rather than as isolated tubes which leads to a quenching of their photoluminescence.     

Quantitative Non-Covalent Functionalization of Carbon Nanotubes

We report a convenient method for quantitative non-covalent functionalization of single-walled carbon nanotubes (SWNT) with phthalocyanine (Pc) compounds, in which a surface coverage of 49% was achieved. The effect of several process parameters on the functionalization process was elucidated. Firstly, as-produced SWNT gave the largest extent of functionalization compared with purified SWNT and as-produced multi-walled carbon nanotubes (MWNT). Secondly, the extent of functionalization was sensitive to the specific molecular structures of the Pc compounds. Finally, in terms of solvent selection, dimethylformamide (DMF) was found to give the largest extent of functionalization, which is then followed by chloroform (CHCl₃) and 1,2-dichlorobenzene (ODCB). The method reported in this paper provides new insights on the interactions between Pc molecules and carbon nanotubes and paves the way for rational control of the degree of functionalization, which is an important step from the perspective of carbon nanotube applications. Electronic supplementary material Supplementary material for this article is avilable at and is accessible for authorised users.