Interlayer adsorption of polyvinylpyrrolidone on montmorillonite

Two methods (x-ray diffraction and desorption of ¹⁰⁹Cd and ⁸⁵Sr) were used to provide indirect evidence for the adsorption of polyvinylpyrrolidone (PVP) on the surface of montmorillonite. It was shown that by decreasing the number of solvent layers in the interlayer distance the amount of adsorbed PVP was decreased, indicating that attachment of the polymer to the tetrahedral sheets is likely to occur. Desorption of radio-nuclides from calcium and sodium montmorillonites confirmed this hypothesis.     

Dehalogenation of Aryl Halides Catalyzed by Montmorillonite Immobilized Bimetal Catalyst in Aqueous System

A novel bisupported bimetal catalyst PVP-PdCl2-FeSO4/Al-Mont-PEG600 was prepared by immobilization of PVP (poly (N-vinyl-2-pyrrolidone)) supported bimetallic catalyst using alumina pillared inartificial montmorillonite as the carrier. This catalyst has good dehalogenation activity and selectivity to aryl halides-o-chlorotoluene in aqueous system in the presence of phase transfer catalyst (PEG) and sodium formate as hydrogen source. The catalyst also shows good reusability.     

Surface properties of chitosan composites with poly(<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone) and montmorillonite

Surface properties of composites containing chitosan (Ch) with poly(N-vinylpyrrolidone) (PVP) and montmorillonite (MMT) additives were investigated by contact angle measurements, thermogravimetric analysis (TGA), atomic force microscopy (AFM) and tensile tests. Composites were obtained by drop casting suspensions of montmorillonite (1 wt % relative to chitosan) and polymer (1 wt %) in 0.1 mol/dm³ acetic acid. Contact angle measurements for diiodomethane (D) and glycerol (G) on the surfaces of the chitosan films, PVP and their composite films were made; surface free energies were also calculated. It was found that the PVP/MMT or Ch/PVP/MMT blend surface is enriched with a high surface energy component, i.e., polyvinylpyrrolidone. The roughness of chitosan composites increases after the addition of montmorillonite; this may indicate an increase in the heterogeneity of this composition in comparison to other compositions. The TGA thermograms and mass loss percentages at different decomposition temperatures showed that the thermal stability of the binary composite slightly increases upon the addition of polyvinylpyrrolidone. The mechanical properties such as tensile strength and Young modulus depend on the composition and varied non-uniformly.     

Polyvinylpyrrolidone adsorption and structural studies on homoionic Li-, Na-, K-, and Cs-montmorillonite colloidal suspensions

Structural aspects of dilute homoionic Li-, Na-, K-, and Cs-montmorillonite (M-montmorillonite) particle suspension (1 g/L) under low-electrolyte-concentration (0.1 mM MCl) conditions were characterized by static (absorbance or turbidity) and dynamic (photon correlation spectroscopy) light-scattering methods as well as by the adsorption behaviors of nonionic polyvinylpyrrolidone (PVP) mol wt 5,000 g/mol (LMW PVP) and mol wt 400,000 g/mol (HMW PVP). Taking Li-montmorillonite as a reference for a single plate particle, a particle size increase and a surface accessibility decrease to polymer adsorptions were measured along the Li, Na, K, and Cs series. The results are related to the existence of montmorillonite quasicrystals or tactoids in diluted suspension, whose stability increases along the same cation series. Molecular weight effects on the PVP surface accessibility are discussed in terms of permeation properties of the different M-montmorillonite particles. Modeling the results calculates an average number of plates in montmorillonite quasi-crystals and the surface area distribution of ultramicropores <0.7 nm and pores >0.7 nm in M-montmorillonite particles. It can also be demonstrated by applying hydrodynamic and electrokinetic methods that the measured high absorbance or turbidity increase of PVP-loaded montmorillonite particles is not due to aggregation phenomena but to a PVP contribution in the light-scattering intensity.     

Flame retarding polyamide 6 with melamine cyanurate and layered silicates

The flammability behavior of the system polyamide 6 (PA 6) + melamine cyanurate (MC) with or without organically modified layered montmorillonite (OMMT) or sodium montmorillonite (Na⁺MMT) was studied. The high degree of flame retardancy (FR) obtained with 13 wt% MC is maintained upon adding up to 0.2 wt% OMMT or Na⁺MMT. Increase mass % of OMMT is antagonistic to the MC effect. The rate of dripping decreases while the size and mass of drops in the UL‐94 tests increases with increasing wt% OMMT indicating increase in viscosity of the melt and decrease in the rate of sublimation of melamine. Addition of poly vinyl pyrrolidone (PVP) decreases the viscosity and partially restores the FR rating. Na⁺MMT does not increase the viscosity and the FR ratings are partially preserved. The peak of heat release rate (PHRR) in the cone calorimeter decreases with increased loading of OMMT. Addition of Na⁺MMT or PVP has little influence on the PHRR. The time of ignition decreases with increase in OMMT, but is not affected when Na⁺MMT is used. This is explained by the low thermal conductivity of the clay containing surface layer of samples during pyrolysis and combustion. Mechanistic considerations are presented. Copyright © 2008 John Wiley & Sons, Ltd.     

Analysis of the Interactions of Polyvinylpyrrolidone with Conventional Anionic and Dimeric Anionic Surfactant

Classical physical method has been applied in the present study of interaction between water soluble polymer with anionic dimeric and conventional anionic surfactants. Micellization activity of carboxylate-based anionic dimeric (CAD) as well as sodium dodecyl sulfate (SDS) surfactants in the presence of nonionic polymer, that is, polyvinylpyrrolidone (PVP), has been studied through conductometric and surface tensiometric measurements. From these methods the critical aggregation concentrations (CACs), critical micelle concentrations (CMCs), and the effective degree of counterion binding (β) were determined. For the evaluation of behavior of CAD toward the PVP various thermodynamic properties viz. standard Gibbs energy of micellization, standard enthalpy, and entropy of micellization of CAD/PVP mixed system have also been estimated and discussed. The results exhibit that anionic dimeric surfactant interacts strongly with PVP as compared to conventional surfactant.     

Studies on the interactions between anionic surfactants and polyvinylpyrrolidone: Surface tension measurement, 13C NMR and ESR

 The interaction between anionic surfactants and polyvinylpyrrolidone (PVP) are investigated using ¹³C NMR, ESR spectroscopy and surface tension measurements at the air/water interface. The behavior of single-chained surfactant, sodium dodecyl sulphonate (AS), is compared with that of the double-chained surfactant, sodium bis(2-ethylhexyl) phosphate (NaDEHP). The results showed that a surfactant–polymer complex of “necklace and head structure” is formed in AS aqueous solutions in the presence of PVP due to the hydrophobic interaction between PVP and AS. The AS micelles nucleate on the polymer hydrophobic sites, and the mobility of the AS head groups is not affected. But, for NaDEHP surfactant, it was found that PVP is little effective in influencing the monomer–micelle equilibrium and no surfactant– polymer complex formed in the NaDEHP aqueous solution. Received: 8 May 1996 Accepted: 14 August 1997     

Adsorption of phenanthrene on organoclays from distilled and saline water

Isotherms of phenanthrene adsorption on different organoclay complexes were obtained using the HPLC technique to understand the adsorption behavior and to characterize the effect of sodium chloride (NaCl) on the adsorption. The adsorbed amounts of phenanthrene on montmorillonite exchanged by organic cations such as tetraheptylammonium, benzyltrimethylammonium, hexadecyltrimethylammonium, or tetraphenylphosphonium were several times higher than those obtained using montmorillonite clay without surface modification. At the same equilibrium concentration, the adsorbed amount of phenanthrene is higher on clay modified with benzyltrimethylammonium than on clay modified with hexadecyltrimethylammonium or other cations. Adsorption of phenanthrene on clay modified with benzyltrimethylammonium increased dramatically as the concentration of NaCl increased up to 150 g/l in the aqueous solution. The shape of the curves obtained can be classified as S-type. The adsorption data obtained from salinity experiments support a mathematical model that links the Langmuir constant with the salinity constant. This model may be useful to predict the equilibrium concentration of a contaminant in saline solution. FTIR studies showed strong interactions between the aromatic rings of phenanthrene and the preadsorbed benzyltrimethylammonium on clay surfaces.     

Interactions of short-chain surfactants with a nonionic polymer

Aqueous solutions containing poly(vinylpyrrolidone) (PVP) and sodium caprylate (SCAP) or tetraethylammonium perfluorooctanesulfonate have been investigated as a function of the surfactant content, the added polymer, temperature and ionic strength. According to experimental evidence, significant interactions have been observed in both systems, with the occurrence of both critical association and micelle formation thresholds. Volumetric, viscometric, ionic conductivity and surface tension methods have been used to quantify the interactions between surfactants and the polymer in ternary systems containing PVP and SCAP or the polymer and the fluorinated surfactant. In both cases, the width of the interaction region is proportional to the PVP content in the mixture. Temperature and ionic strength have a relevant effect on the width of the interaction region, which decreases on increasing the temperature. Binding onto PVP and micelle formation were analyzed in terms of a mass-action model. In this way, the observed behavior was rationalized and information on the thermodynamics of such mixtures was given. Received: 28 February 2001 Accepted: 5 June 2001     

The Adsorption of Polyvinylpyrrolidone on Kaolinite Saturated with Sodium Chloride

The adsorption of two different molecular weights of polyvinylpyrrolidone (PVP) (M(w)=44,000 and M(w)=360,000 g mol(-1)) from water on kaolinite saturated with sodium chloride has been studied. The adsorption of PVP increases slowly as temperature increases. The adsorption of PVP on the kaolinite was studied by considering Fourier transform infrared (FTIR) spectra, X-ray diffraction patterns, and dielectric constants. During the adsorption process, PVP interacts with saturating sodium cations and possibly forces some of them onto the edges of the kaolinite; thus, the dielectric constant of saturated kaolinite is reduced after PVP adsorption. Copyright 2001 Academic Press.     

高聚物负载型双金属催化剂催化氢转移有机卤化物脱卤

 以甲酸钠为氢转移试剂,以聚乙烯基吡咯烷酮负载PdCl2和其它金属盐制成双金属催化剂PVP－PdCl2－MXn,用于催化有机卤化物脱卤．与负载型单金属催化剂PVP－PdCl2相比,PVP－PdCl2－CdCl2和PVP－PdCl2－HgCl2对氯代芳烃脱氯有高得多的催化活性和脱氯选择性,且偶联副产物显著减少;以对氯苯胺为底物时,双金属催化下的反应时间缩短为单金属催化下的1／8,而脱氯产物收率提高25倍;底物为对氯甲苯时,双金属催化下的偶联副产物仅为单金属催化下的1／390．用IR和TEM技术对PVP负载型金属催化剂进行了表征,并讨论了双金属协同脱卤作用．     

Size control of semimetal bismuth nanoparticles and the UV-visible and IR absorption spectra

We introduced a simple chemical method to synthesize semimetal bismuth nanoparticles in N,N-dimethylformamide (DMF) by reducing Bi(3+) with sodium borohydride (NaBH(4)) in the presence of poly(vinylpyrroldone) (PVP) at room temperature. The size and dispersibility of Bi nanoparticles can be easily controlled by changing the synthetic conditions such as the molar ratio of PVP to BiCl(3) and the concentration of BiCl(3). The UV-visible absorption spectra of Bi nanoparticles of different diameters are systematically studied. The surface plasmon peaks broaden with the increasing molar ratio of PVP to BiCl(3) as the size of bismuth nanoparticles decreases. Infrared (IR) spectra of the complexes with different molar ratios of PVP/BiCl(3) show a strong interaction between the carboxyl oxygen (C=O) of PVP and Bi(3+) ion and a weak interaction between the carboxyl oxygen (C=O) of PVP and the Bi atom in nanoparticles. This indicates that PVP serves as an effective capping ligand, which prevents the nanoparticles from aggregation.     

Effect of surfactant agent upon the structure of montmorillonite

The modification of sodium montmorillonite (MMT) through the incorporation of amphiphilic octadecylammonium cations in various concentrations (10–200% CEC) into the clay’s interlayer spaces has been studied. High resolution thermogravimetric analysis shows that the thermal decomposition of modified montmorillonite occurs in three steps. The first step of mass loss is related to dehydration of adsorbed water and water hydrating metal cations such as Na⁺. The second step of mass loss is attributed to the decomposition of surfactant. The third step is due to the loss of OH units during the dehydroxylation of the montmorillonite. The conformation of the surfactant cations in the confined space of the silicate galleries is investigated by X-ray diffraction analysis. These analyses are very important for any attempt to incorporate the organomodified MMT particles into different media for various applications such as polymer nanocomposite preparation.     

Physicochemical Investigations on the Interaction of Surfactants and Salts with Polyvinylpyrrolidone in Aqueous Medium

Microcalorimetric investigations have been carried out onthe interaction of the surfactants sodium cholate, sodium deoxycholate, tetradecyltrimethylammonium bromide, cetyl(hexadecyl)trimethylammonium bromide, and p-tert-octylphenoxy polyoxy-ethylene ether (Triton X-100) and the salts potassium iodide, sodium benzoate, sodium bromide, and sodium salicylate with the neutral polymer polyvinylpyrrolidone (PVP). The enthalpy of dilution of the surfactants has been measured in the absence and presence of the polymer and the results are compared to determine the effect of PVP on the micellization of the surfactants and the energetics of the process. As well, the micellization activity of the surfactants in the presence of the polymer has been studied by conductometric and fluorimetric methods. The enthalpy of dilution of the salts has been measured to provide an understanding of the nature and magnitude of their interaction with PVP. Copyright 2001 Academic Press.     

Nickel nanoparticles obtained by a modified polyol process: synthesis, characterization, and magnetic properties

The synthesis of nickel nanoparticles using poly(N-vinilpyrrolidone) (PVP) as protective agent was studied. The nanoparticles were prepared in air according to a modified polyol route, using nickel chloride as precursor and sodium borohydride as reducing agent. Samples with different nickel/PVP ratio were obtained. The X-ray diffraction and transmission electron microscopy (TEM) measurements indicate the occurrence of face-centered cubic metallic nickel nanoparticles with a medium diameter of 3.8 nm and good size dispersion. Fourier transformed infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) data show an effective interaction between the nickel nanoparticles surface and the carboxyl oxygen atoms of PVP. Magnetic measurements show single-domain nonideal superparamagnetism behavior due to dipolar magnetic coupling between particles.     

Acceleration effect of poly(vinylpyrrolidone) on williamson reaction. II. Studies on the dissociation of sodium phenoxide in the presence of poly(vinylpyrrolidone)

In connection with the accelerating effect of poly(N-vinylpyrrolidone) (PVP) on a Williamson reaction, PhONa + NC₄H₉Br → PhO-(n-C₄H₉) + NaBr, the ionic dissociation of sodium phenoxide (PhONa) was studied by means of conductance measurements and ultraviolet spectroscopy. Results suggest that the degree of dissociation of PhONa increased with the amount of PVP as well as N-methylpyrrolidone (NMP), the monomeric analog, the effect of PVP being much larger than that of NMP at the same concentration. It is assumed that free phenolate anion produced by solvation of sodium cation with NMP or the pyrrolidone residues of PVP plays an important role in the acceleration of the reaction and that the higher reaction rates in PVP solution are due to the greater dissociation of PhONa.     

Partial specific adsorption of organic molecules in binary mixtures of adsorbents: 2,2'-bipyridine on kaolinite and hematite and 1,10-phenanthroline on montmorillonite and hydroxy-Al montmorillonite

The adsorption of 2,2'-bipyridyl in binary mixtures of sodium kaolinite and hematite at pH 6.6 and of 1,10-phenanthroline in binary mixtures of sodium montmorillonite and hydroxy-Al montmorillonite at pH 7.5 was studied as a function of the equilibrium concentration and composition of the mixture. A model is presented for determining the partial specific adsorption of two adsorbents by each component of the mixture, based on the graphic method for determining partial quantities. The partial specific adsorption values obtained for binary mixtures of Na-kaolinite with hematite and Na-montmorillonite with hydroxy-Al montmorillonite are strongly influenced by the concentration of adsorbates and adsorbents in the mixtures.     

Mixed adsorption of poly(vinylpyrrolidone) and sodium dodecylbenzenesulfonate on kaolinite

The mixed adsorption of the nonionic polymer poly(vinylpyrrolidone) (PVP) and the anionic surfactant sodium dodecylbenzenesulfonate (SDBS) on kaolinite has been studied. Both components adsorb from their mixture onto the clay mineral. The overall adsorption process is sensitive to the pH, the electrolyte concentration, and the amounts of polymer and surfactant. Interpretation of the experimental data addresses also the patchwise heterogeneous nature of the clay surface. In the absence of PVP, SDBS adsorbs on kaolinite by electrostatic and hydrophobic interactions. However, when PVP is present, surfactant adsorption at 10(-2) M NaCl is mainly driven by charge compensation of the edges. The adsorption of PVP from the mixture shows similar behavior under different conditions. Three regions can be distinguished based on the changing charge of polymer-surfactant complexes in solutions with increasing SDBS concentration. At low surfactant content, PVP adsorbs by hydrogen bonding and hydrophobic interactions, whereas electrostatic interactions dominate at higher surfactant concentrations. Over the entire surfactant concentration range, polymer-surfactant aggregates are present at the edges. The composition of these surface complexes differs from that in solution and is controlled by the surface charge.     

Growth kinetics of platinum nanocrystals prepared by two different methods: role of the surface

In order to examine the applicability of the diffusion-limited Ostwald ripening model to the growth kinetics of nanocrystals, platinum nanocrystals prepared by two different methods have been investigated by a combined use of small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). One of the methods of synthesis involved the reduction of chloroplatinic acid by sodium citrate while in the other method reduction was carried out in the presence of polyvinylpyrrolidone (PVP) as a capping agent. The growth of platinum nanocrystals prepared by citrate reduction in the absence of any capping agent follows a Ostwald ripening growth with a D(3) dependence. In the presence of PVP, the growth of platinum nanocrystals does not completely follow the Ostwald ripening model, making it necessary to include a surface reaction term in the growth equation. Thus, the growth of platinum nanocrystals in the presence of PVP has contributions both from diffusion and surface reaction, exhibiting a D(3)+D(2) type behavior.     

Effect of kappa-carrageenan on the properties of poly(N-vinyl pyrrolidone)/kappa-carrageenan blend hydrogel synthesized by γ-radiation technology

A series of hydrogels in the form of rods were prepared from kappa-carrageenan (KC) and poly (N-vinyl pyrrolidone) (PVP) by gamma radiation with ⁶⁰Co γ source at room temperature. The properties of the prepared hydrogels, such as the gel strength, gel fraction and swelling behavior were investigated. Incorporation of KC into the PVP/water system increased obviously the gel strength and equilibrium degree of swelling (EDS) of PVP hydrogel. The experimental analyses showed that the crosslinking reaction of PVP was quicker than the degradation of KC at a low dose (less than 30 kGy), and the degradation of KC was inhibited in the PVP/KC mixture system. So an interpenetrating polymer network (IPN) hydrogel composed of PVP (a chemical crosslinking network) and KC (a physical crosslinking network) was proposed here. The existence of different classes of water in this IPN system was shown by water melting curves using DCS.