ZnTe结构相变、电子结构和光学性质的研究

运用密度泛函理论体系下的投影缀加波方法, 对闪锌矿和朱砂相结构的ZnTe在高压下的状态方程和结构相变进行了研究, 并分析了相变前后的原胞体积、电子结构和光学性质. 结果表明: 闪锌矿结构转变为朱砂相结构的相变压力为8.6 GPa, 并没有出现类似材料高压导致的金属化现象, 而是表现出间接带隙半导体特性. 相变后, 朱砂相结构Zn和Te原子态密度分布均向低能级方向移动, 带隙变小; 轨道杂化增强, 更有利于Te 5p与Zn 3d间的电子跃迁, 介电常数虚部主峰明显增强, 但宏观介电常数不受压力的影响.     

高压下ZnS的电子结构和性质

运用密度泛函理论体系下的平面波赝势(PWP)和广义梯度近似(GGA)方法，计算研究了闪锌矿结构的ZnS晶体在不同的外界压强下的电子结构. 通过分析发现，随着外界压强的增大，晶格常数和键长在不断缩小，从S原子向Zn原子转移的电荷越来越少，Zn—S键的共价性逐渐增强，Zn原子和S原子的态密度都有不同程度的变化，而且还有向低能量移动的趋势. 当外界压强达到24GPA时，ZnS从直接带隙半导体变成间接带隙半导体，而且随着压强的增大，间接带隙逐渐变小，直接带隙逐渐增大. 关键词： 闪锌矿结构 态密度 能带结构 密度泛函理论     

Te掺杂单层MoS2的电子结构与光电性质

采用基于密度泛函理论的第一性原理计算,研究了Te掺杂对单层MoS₂能带结构、电子态密度和光电性质的影响。结果表明,本征单层MoS₂属于直接带隙半导体材料,其禁带宽度为1.64 eV。本征单层MoS₂的价带顶主要由S-3p态电子和Mo-4d态电子构成,而其导带底则主要由Mo-4d态电子和S-3p态电子共同决定;Te掺杂单层MoS₂为间接带隙半导体材料,其禁带宽度为1.47 eV。同时通过Te掺杂,使单层MoS₂的静态介电常数增大,禁带宽度变窄,吸收光谱产生红移,研究结果为单层MoS₂在光电器件方面的应用提供了理论基础。     

点缺陷对单层MoS_2电子结构及光学性质的影响研究

采用基于第一性原理的贋势平面波方法,对不同类型点缺陷单层Mo S2电子结构、能带结构、态密度和光学性质进行计算.计算结果表明:单层Mo S2属于直接带隙半导体,禁带宽度为1.749e V,Mo空位缺陷V-Mo的存在使得单层Mo S2转化为间接带隙Eg=0.660e V的p型半导体,S空位缺陷V-S使得Mo S2带隙变窄为Eg=0.985e V半导体,S原子替换Mo原子S-Mo反位缺陷的存在使得Mo S2转化为带隙Eg=0.374e V半导体;Mo原子替换S原子Mo-S反位缺陷形成Eg=0.118e V直接带隙半导体.费米能级附近的电子态密度主要由Mo的4d态和s的3p态电子贡献.光学性质计算表明:空位缺陷对Mo S2的光学性质影响最为显著,可以增大Mo S2的静态介电常数、折射率n0和反射率,降低吸收系数和能量损失.     

立方钙钛矿RbZnF3电子、弹性和光学性质的第一性原理研究

基于密度泛函理论和赝势平面波方法研究了立方钙钛矿RbZnF3的电子结构和光学性质;利用静水有限应变技术计算研究了RbZnF3弹性常数Cij、体积弹性模量B和剪切模量G随压力的变化关系。基态下,RbZnF3晶格常数a和体积弹性模量B0计算值与实验值以及其他理论值一致。根据能带结构、总态密度以及分波态密度分析可知：基态下立方钙钛矿结构RbZnF3为间接带隙半导体材料,带隙为3.57eV,与其他计算结果比较,本文计算结果偏低,这是由于局域密度近似(LAD)或广义梯度近似(GGA)交换关联函数的局限性所致。基态下RbZnF3的Mulliken电荷分布和集居数说明：RbZnF3属于共价键和离子键所形成的混合键化合物;RbZnF3的电荷总数主要来源于Rb 4s和4p轨道,Zn 3d轨道,以及F 2s和2p轨道。电荷主要从Rb, Zn原子向F原子转移。同时,本文还计算研究了RbZnF3的光学介电函数、吸收系数、复折射率、能量损失谱和反射系数等光学性质。     

点缺陷对单层MoS2电子结构及光学性质的影响研究

采用基于第一性原理的贋势平面波方法,对不同类型点缺陷单层MoS2电子结构、能带结构、态密度和光学性质进行计算。计算结果表明：单层MoS2属于直接带隙半导体,禁带宽度为1.749ev,V-Mo缺陷的存在使得MoS2转化为间接带隙Eg=0.671eV的p型半导体,V-S缺陷MoS2的带隙变窄为Eg=0.974eV,S-Mo缺陷的存在使得MoS2转化为间接带隙Eg=0.482eV; Mo-S缺陷形成Eg=0.969eV直接带隙半导体,费米能级上移靠近价带。 费米能级附近的电子态密度主要由Mo的4d态和s的3p态电子贡献。光学性质计算表明：空位缺陷对MoS2的光学性质影响最为显著,可以增大MoS2的静态介电常数、折射率n0和反射率,降低吸收系数和能量损失。     

立方钙钛矿RbZnF_3电子、弹性和光学性质的第一性原理研究

基于密度泛函理论和赝势平面波方法研究了立方钙钛矿RbZnF_3的电子结构和光学性质;利用静水有限应变技术计算研究了RbZnF_3弹性常数Cij、体积弹性模量B和剪切模量G随压力的变化关系.基态下,RbZnF_3晶格常数a和体积弹性模量B0计算值与实验值以及其他理论值一致.根据能带结构、总态密度以及分波态密度分析可知:基态下立方钙钛矿结构RbZnF_3为间接带隙半导体材料,带隙为3.57eV,与其他计算结果比较,本文计算结果偏低,这是由于局域密度近似(LAD)或广义梯度近似(GGA)交换关联函数的局限性所致.基态下RbZnF_3的Mulliken电荷分布和集居数说明:RbZnF_3属于共价键和离子键所形成的混合键化合物;RbZnF_3的电荷总数主要来源于Rb 4s和4p轨道,Zn 3d轨道,以及F 2s和2p轨道.电荷主要从Rb,Zn原子向F原子转移.同时,本文还计算研究了RbZnF_3的光学介电函数、吸收系数、复折射率、能量损失谱和反射系数等光学性质.     

BaHfO3纳米薄膜电子结构、光学和弹性性质的第一性原理研究

采用基于密度泛函理论的第一性原理方法,在局域密度近似（LDA）下研究了厚度为0.626～2.711nm (100)面BaHfO3薄膜的电子结构、光学和弹性性质．电子结构和光学性质计算结果表明：以BaO为表面层原子的BaHfO3纳米薄膜均为直接带隙半导体材料,带隙随薄膜厚度减小而逐渐减小,表现出明显的量子尺寸效应,此时薄膜的光学吸收边发生红移,吸收带出现窄化现象．以HfO2作为表面层原子的BaHfO3薄膜则属于间接带隙半导体材料,且带隙随薄膜厚度减小而微弱增加．弹性性质计算结果表明：体弹模量、剪切模量和杨氏模量等表征材料硬度的力学参数均随BaHfO3纳米薄膜厚度减小而显著减小,呈现尺寸效应．电荷密度分布分析揭示了薄膜厚度改变了BaHfO3纳米薄膜的价健特性,这是材料硬度改变的内在原因．该研究结果为BaHfO3纳米薄膜材料的设计与应用提供了理论依据．     

应力调控下二维硒化锗五种同分异构体的第一性原理研究

采用第一性原理计算方法,研究了二维单层硒化锗(GeSe)的5种同分异构体结构的稳定性和在应力调控下的电子性质变化规律.计算结果表明:5种同分异构体结构都具有热力学稳定性; a-GeSe是直接带隙半导体, b-GeSe, g-GeSe, d-GeSe和e-GeSe都是间接带隙半导体. a-GeSe在应力调控下出现了直接到间接带隙的转变和半导体到金属性质的转变. b-GeSe和g-GeSe在应力的作用下具有可调节的间接带隙范围.当沿dGeSe双轴方向施加压缩应力为1%和4%时, d-GeSe的能带从间接带隙转变成直接带隙.通过沿e-GeSe的扶手椅形方向施加10%的拉伸应变,出现了从间接带隙到直接带隙的转变;继续增加拉伸应变到20%,能带结构一直保持直接带隙的特征,其可调范围为1.21—1.44 eV.沿d-GeSe双轴方向施加10%拉伸应变时,也出现了从间接带隙到直接带隙的转变;该直接带隙在双轴拉伸应变增加到19%前一直保持,可调范围为0.61—1.19 eV.     

Mn掺杂对半金属铁磁体Fe_2Si电磁特性的影响

此文用基于密度泛函理论第一性原理的贋势平面波方法,计算了Fe_2Si及Mn掺杂Fe_2Si体系的能带结构、电子态密度和磁学特性,分析了不同位置Mn掺杂对Fe_2Si电磁特性的影响,获得了纯的和不同位置Mn掺杂的Fe_2Si体系是铁磁体,自旋向上的能带结构穿过费米面表现金属特性,纯Fe_2Si的半金属隙为0.164e V;Mn掺杂在Fe1位时,自旋向下部分转变为A-M间的间接带隙半导体,体系呈现半金属特性,此时磁矩为2.00μB,是真正的半金属性铁磁体;掺杂在Fe2位时,自旋向下部分的带隙值接近于0,体系呈现金属特性;掺杂在Fe3位时,自旋向下部分转变为L-L间的直接带隙半导体,体系呈现半金属特性等有益结果 .自旋电荷密度分布图表明Mn原子的3d电子比较局域,和周围原子成键时3d电子更倾向于形成共价键.体系的半金属性和磁性主要来源于Fe-3d电子与Mn-3d电子之间的d-d交换,Si-3p电子与Fe、Mn-3d电子之间的p-d杂化.这些结果为半金属铁磁体Fe_2Si的电磁调控提供了有效的理论指导.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.