Molecular recognition of 7-(2-octadecyloxycarbonylethyl)guanine to cytidine at the air/water interface and LB film studied by Fourier transform infrared spectroscopy

Monolayer behavior of a nucleolipid amphiphile, 7-(2-octadecyloxycarbonylethyl)guanine (ODCG), on aqueous cytidine solution was investigated by means of surface-molecular area (pi-A) isotherms. It indicates that molecular recognition by hydrogen bonding is present between ODCG monolayer and the cytidine in subphase. The Fourier transform infrared (FTIR) transmission spectroscopic result indicates that the cytidine molecules in the subphase can be transferred onto solid substrates by Langmuir-Blodgett (LB) technique as a result of the formation of Watson-Crick base-pairing at the air/water interface. Investigation by rotating polarized FTIR transmission also suggests that the headgroup recognition of this amphiphile to the dissolved cytidine influence the orientation of the tailchains.     

Characterization of Langmuir-Blodgett films of a ferroelectric liquid crystal

Molecular orientation, structure, and phase transition behaviors in Langmuir-Blodgett (LB) and cast films of a ferroelectric liquid crystal of sec-butyl 6-(4-(nonyloxy)benzoyloxy)-2-naphthoate (FLC-1) are determined by ultraviolet (UV) spectroscopy, X-ray diffraction, and infrared (IR) spectroscopy. It is found that the orientation angle of chromophores theta in LB films is 41 degrees from the surface normal. The tilt angle of the chromophore changes at 56, 70, and 88 degrees C, respectively, which denotes the presence of phase transitions. Two kinds of layered or isomeric crystal structures of the LB films with layer spacings of 3 and 3.5 nm at room temperature have been found while the latter disappears above 45 degrees C, as confirmed by measurement of temperature-dependent IR spectra.     

Molecular recognition of cytosine- and guanine-functionalized nucleolipids in the mixed monolayers at the air-water interface and Langmuir-Blodgett films

Molecular recognition of mixed nucleolipids of 1-(2-octadecyloxycarbonylethyl)cytosine and 7-(2-octadecyloxycarbonylethyl)guanine in the monolayers at the air-water interface and Langmuir-Blodgett (LB) films has been investigated in detail using surface pressure/potential-area isotherms, infrared reflection-absorption spectroscopy (IRRAS), and Fourier transform infrared (FTIR) transmission spectroscopy, respectively. Prior to molecular recognition, the cytosine moieties in the monolayer were hydrogen bonded with an almost flat-on orientation, the alkyl chains were uniaxially oriented with respect to the film normal, the guanine moieties in the monolayer were stacked probably through pi-pi interaction with an end-on orientation, and the C-C-C planes of the alkyl chains were preferentially oriented parallel to the water surface. In the monolayer of equimolar mixture, molecular recognition between the cytosine and guanine moieties occurred together with the ring planes of base pairing and the C-C-C planes of the alkyl chains favorably oriented parallel to the water surface. The guanine moieties underwent an orientation change from an end-on mode before molecular recognition to a flat-on one after molecular recognition. The base pairing between the cytosine and guanine moieties in the monolayers was achieved since the N7-substituted guanine derivatives suppressed the formation of guanine tetramers. Both the IRRAS spectra of the monolayers and the FTIR spectra of the LB films presented the exact sites in the cytosine and guanine moieties for the formation of triple hydrogen bonds. The base pairing resulted in a change in molecular orientation and interaction, and the corresponding LB film exhibited a different phase transition behavior from a typical crystal transition for the cytosine-functionalized nucleolipids and an analogous glass transition for the guanine-functionalized nucleolipids. The thermal stability of the mixed LB film was improved in comparison to the LB films of pure components.     

Effect of thickness and monolayer location on thermostability of metal stearate LB films studied by FT-IR reflection—absorption spectroscopy

LB films of Cd and Ca stearates with 1, 3, 9, and 21 monolayers were fabricated on silver-coated glass slides. 9-Monolayer LB films of Cd and Ca salts of deuterated stearic acid, in which the 1st, 5th, or 9th layer was replaced by 1 monolayer of undeuterated analogues, were also prepared on the above substrates. Temperature dependences of Fourier transform infrared (FT-IR) reflection—absorption (RA) spectra were examined for these LB films in the range 31–140°C. At room temperature, the hydrocarbon chains in these LB films were in a well-ordered state with a high degree of perpendicular orientation to the substrate. However, they became disordered at elevated temperatures. These order-disorder phase transition temperatures were dependent on the film thickness, to a small degree in the Cd stearate LB film (102–108°C), but to a large degree in the Ca stearate LB film (103–129°C). In the latter LB film, the effect of dehydration was inferred. The degree of disorder at high temperatures was dependent on the film thickness and the location of monolayer in the 9-monolayer LB films. This result is discussed in terms of the internal pressure within the LB film.     

Structure Studies on Ion Coordination in 2,4-Dihydroxy-N-Octadecybenzylideneamine LB Films by UV-Vis Absorption and FTIR Spectroscopy

The coordination reaction of Cu(2+) ions with the Schiff base amphiphile 2,4-dihydroxy-N-octadecylbenzylideneamine in ultrathin organic LB films was probed by Fourier transform infrared (FTIR) transmission spectroscopy and UV-Vis electronic absorption spectroscopy. FTIR spectral changes owing to LB films of 2,4-dihydroxy-N-octadecylbenzylideneamine contacting aqueous Cu(OAC)(2) solution suggest the formation of ion-coordination films, which is corroborated by UV-Vis absorption spectra. The coordination reaction of the annealing film at different temperatures suggests that the microstructure of LB films had an important effect on the reaction rate. Detailed analysis shows that ion-coordination films take an isotropic unaxial orientation and exhibit phase transition behavior, which is determined by the different complex structures of headgroups and of subphase and surface film. Copyright 2000 Academic Press.     

倒浮萍聚合物ES-3LB膜掠角反射-吸收红外光谱的研究

用傅里叶变换红外掠角反射-吸收光谱技术对ES-3LB膜的取向和相变行为进行了详细的研究.结果表明,在金表面上制备的ES-3LB膜中烷基链基本垂直于基面.相转变行为的研究表明,ES-3LB膜有3个相变点,分别在65,105和140℃.第一个相变过程表现为LB膜从一种有序状态到另一种有序状态的转变;第二个相变过程表现为LB膜中烷基链的有序-无序转变;第三个相变过程是LB膜的层状结构坍塌转变为各向同性熔融体的过程.     

Fabrication, structural characterization, and applications of langmuir and langmuir-blodgett films of a poly(azo)urethane

The synthesis of a poly(azo)urethane by fixing CO(2) in bis-epoxide followed by a polymerization reaction with an azodiamine is presented. Since isocyanate is not used in the process, it is termed "clean method" and the polymers obtained are named "NIPUs" (non-isocyanate polyurethanes). Langmuir films were formed at the air-water interface and were characterized by surface pressure vs mean molecular area per mer unit (Pi-A) isotherms. The Langmuir monolayers were further studied by running stability tests and cycles of compression/expansion (possible hysteresis) and by varying the compression speed of the monolayer formation, the subphase temperature, and the solvents used to prepare the spreading polymer solutions. The Langmuir-Blodgett (LB) technique was used to fabricate ultrathin films of a particular polymer (PAzoU). It is possible to grow homogeneous LB films of up to 15 layers as monitored using UV-vis absorption spectroscopy. Higher number of layers can be deposited when PAzoU is mixed with stearic acid, producing mixed LB films. Fourier transform infrared (FTIR) absorption spectroscopy and Raman scattering showed that the materials do not interact chemically in the mixed LB films. The atomic force microscopy (AFM) and micro-Raman technique (optical microscopy coupled to Raman spectrograph) revealed that mixed LB films present a phase separation distinguishable at micrometer or nanometer scale. Finally, mixed and neat LB films were successfully characterized using impedance spectroscopy at different temperatures, a property that may lead to future application as temperature sensors. Principal component analysis (PCA) was used to correlate the data.     

Columnar self-assembly and alignment of planar carbenium ions in Langmuir-Blodgett films

Structural and optical properties of multilayer Langmuir-Blodgett (LB) films of two amphiphilic carbenium salts 2-didecylamino-6,10-bis(dimethylamino)-4,8,12-trioxatriangulenium hexafluorophosphate (ATOTA-1) and 2,6-bis(decylmethylamino)-10-dimethylamino-4,8,12-trioxatriangulenium hexafluorophosphate (ATOTA-2) are described. The LB films were prepared on lipophilic glass by standard vertical dipping. Grazing incidence X-ray diffraction (GIXD) measurements show that the planar organic cores, in spite of their positive charge, form closely packed columns with a repeating distance of ～3.45 ?. Specular X-ray reflectivity (SXR) reveals the LB multilayers to consist of Y-type bilayers with thickness 31 ? for ATOTA-1 and 41 ? for ATOTA-2. This significant difference is ascribed to the different packing motifs of the alkyl chains in the two LB films. GIXD and polarized UV-vis absorption and emission spectroscopy show that the columnar aggregates in the LB films are oriented along the dipping direction. This alignment is attributed to shear effects during LB transfer. The main absorption band of the LB films is blue-shifted compared to that in solution, while the fluorescence is red-shifted by more than 100 nm. These findings suggest the presence of H-aggregates in agreement with the cofacial packing derived from the X-ray measurements. Polarized absorption spectroscopy with variable angle of incidence was used to resolve two perpendicular optical transitions in the visible range, one at 460 nm polarized perpendicular to the columnar direction, in the plane of the film, and one at 420 nm polarized along the film normal.     

Molecularly organized Langmuir-Blodgett films from a ruthenium biphosphine complex

Langmuir-Blodgett (LB) films from a ruthenium complex mer-[RuCl3 (dppb)(4-Mepy)] (dppb = PPh2 (CH2)4PPh2; 4-Mepy = 4-methylpyridine), termed Ru-Pic, display a distinct color, which is different from the coloration exhibited by cast films or chloroform solutions. The solution and cast films are red, while the LB films are green-bluish. The manifestation of the blue color in the LB film finds its explanation in a unique absorption band at 690 nm, which is associated with the oxidation of the phosphine moieties. Fluorescence emission and absorption-reflection infrared spectroscopy measurements revealed the molecular organization in the LB films. In contrast, cast films showed a random distribution of complexes. Surface-enhanced Raman scattering was also used in an attempt to identify the main interactions in Ru-Pic.     

Probing chitosan and phospholipid interactions using Langmuir and Langmuir-Blodgett films as cell membrane models

The interaction between chitosan and Langmuir and Langmuir-Blodgett (LB) films of dimyristoyl phosphatidic acid (DMPA) is investigated, with the films serving as simplified cell membrane models. At the air-water interface, chitosan modulates the structural properties of DMPA monolayers, causing expansion and decreasing the monolayer elasticity. As the surface pressure increased, some chitosan molecules remained at the interface, but others were expelled. Chitosan could be transferred onto solid supports alongside DMPA using the LB technique, as confirmed by infrared spectroscopy and quartz crystal microbalance measurements. The analysis of sum-frequency vibration spectroscopy data for the LB films combined with surface potential measurements for the monolayers pointed to chitosan inducing the ordering of the DMPA alkyl chains. Furthermore, the morphology of DMPA LB films, studied with atomic force microscopy, was affected significantly by the incorporation of chitosan, with the mixed chitosan-DMPA films displaying considerably higher thickness and roughness, in addition to chitosan aggregates. Because chitosan affected DMPA films even at pressures characteristic of cell membranes, we believe this study may help elucidate the role of chitosan in biological systems.     

Improved thermal stability of Langmuir-Blodgett films through an intermolecular hydrogen bond and metal complex

Langmuir-Blodgett (LB) films of N-octadecanoyl-L-alanine and its silver and zinc complexes have been investigated by variable-temperature Fourier transform infrared transmission spectroscopy. The thermal stability of LB films is improved through an intermolecular hydrogen bond and metal complex. The intermolecular hydrogen-bonding interaction between hydrophilic head groups in the same monolayers and the metal complex between one head group and another in the neighboring monolayers considerably increase the interaction between the corresponding hydrophobic alkyl chains. It is shown that the transformation of the triclinic subcell packing of the molecules in the LB films prior to and after the silver complex into hexagonal packing occurs before the phase transition accompanied with a change in molecular orientation. The phase transition behavior of the LB films is varied from a small temperature interval to large one depending on the hydrogen bond and metal complex.     

One-step synthesis of monodisperse silver nanoparticles beneath vitamin E Langmuir monolayers

The monodisperse silver nanoparticles were synthesized by one-step reduction of silver ions in the alkaline subphase beneath vitamin E (VE) Langmuir monolayers. The monolayers and silver nanocomposite LB films were characterized by surface pressure-area (pi-A) isotherms, transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-vis), selected area electron diffraction (SAED), Fourier transform infrared transmission spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), respectively. The results showed that the limiting area/VE molecule on different subphases varied. The phenolic groups in the VE molecules were converted to a quinone structure, and the silver ions were mainly reduced to ellipsoidal and spherical nanoparticles. The arrangement of the nanoparticles changed from sparseness to compactness with reaction time. The electron diffraction pattern indicated that the silver nanoparticles were face-centered cubic (fcc) polycrystalline. Silver nanocomposite LB films with excellent quality could be formed on different substrates, indicating that the transfer ratio of monolayer containing silver nanoparticles is close to unity. The dynamic process of reduction of silver ions by VE LB films was also studied through monitoring the conductivity of an Ag2SO4 alkaline solution.     

修饰Langmuir-Blodget膜法制备聚(3,4-亚乙基二氧噻吩)薄膜结构和导电性能的研究

采用修饰Langmuir-Blodget(LB)膜法以二十烷酸(AA)LB膜为模板,通过3,4-亚乙基二氧噻吩(EDOT)单体在LB膜亲水基团间聚合,制备了二十烷酸/聚(3,4-亚乙基二氧噻吩)(AA/PEDOT)复合LB膜.UV-Vis、FTIR和XPS分析表明EDOT在多层膜中有效聚合,生成了PEDOT导电聚合物;X射线衍射(XRD)和二次离子质谱(SIMS)分析表明薄膜具有较好的层状有序结构,进一步研究发现EDOT在AA多层膜中的聚合破坏了原有LB膜的有序性,这可能与聚合过程对层状结构产生的破坏作用有关;采用四探针仪及半导体测试仪研究了薄膜导电性能,发现AA/PEDOT多层膜的电导率随处理时间的变化产生突变,这与多层膜中导电通道的"逾渗"有关,在有效导电网络连通后电导率发生了突变.测试结果还表明AA层和PEDOT层之间具有较为明显的界面,PEDOT显示出较好的定域性,薄膜具有很好的层状有序结构.     

Nanoscale surface patterns from 10(3) single molecule helices of biodegradable poly(L-lactic acid)

Atomic force microscopy, reflection absorption infrared spectroscopy, and X-ray reflectivity studies reveal that poly(L-lactic acid) molecules in Langmuir-Blodgett (LB) films exist as 10(3) helices over nearly the entire length of the polymer chain. This feature gives rise to LB films with highly ordered nanoscale smectic liquid crystalline-like surface patterns with low surface roughness and lamellar spacings that scale with molar mass. These studies provide a new approach for controlling surface morphology with a biodegradable polymer commonly used for drug delivery and tissue engineering.     

Interfacial reactions of nickel ion containing multilayers and nickel ultra‐thin films with an interpenetrating polymer network substrate

An interpenetrating polymer network (IPN) substrate was prepared by dip‐pulling a silicon wafer or glass plate into polymer precursors, followed by solidification at room temperature. The nickel ion containing Langmuir–Blodgett (LB) multilayers was subsequently fabricated onto the IPN substrate by a LB technique, and then the nickel ultra‐thin films were deposited by chemical reduction. The interfacial reactions, the metal transformations and the non‐metal bond types during the film formation were detected by the X‐ray photoelectron spectroscopy, atomic force microscope and attenuated total reflection infrared spectroscopy. Copyright © 2011 John Wiley & Sons, Ltd.     

Infrared spectroscopy analysis of the structure of multilayer Langmuir-Blodgett films: effect of deposition velocity and pH

Multiple Langmuir-Blodgett (LB) films of arachidic acid were deposited on germanium (Ge) substrates from subphase solutions of 10(-4) M CdCl2 at different pH values and at different deposition speeds. Attenuated total reflectance infrared (ATR-IR) spectroscopy was used to obtain information on the molecular order and structure of these multilayer LB films. At pHs higher than the pKa of the fatty acid/cation system, transfers took place only during the downstroke, indicating X-type deposition. At pH = pKa and large deposition speeds, deposition partially failed during the downstroke, resulting in Z-type depositions. Analysis of the infrared spectra indicates that multiple LB films deposited only during the upstroke (Z-type) or during downstrokes (X-type) have a centrosymmetric structure typical of films deposited during the upstroke and downstroke, except for a slight decrease in molecular order and tilt angle as the pH increases (X-type). The centrosymmetric structure indicates that rearrangement of layers takes place between cycles. Experimental evidence of such rearrangement occurring in a fatty acid/divalent cation salt subphase is shown here, and rearrangement alternatives are discussed.     

Preparation and characterization of mono- and multilayer films of polymerizable 1,2-polybutadiene using the Langmuir-Blodgett technique

The essence of this study is to apply the Langmuir-Blodgett (LB) technique for assembling asymmetric membranes. Accordingly, Langmuir films of a (further) polymerizable polymer, 1,2-polybutadiene (1,2-pbd), were studied and transferred onto different solid supports, such as gold, indium tin oxide (ITO), and silicon. The layers were characterized both at the air/water interface as well as on different substrates using numerous methods including cyclic voltammetry, impedance spectroscopy, spectroscopic ellipsometry, atomic force microscopy, X-ray photoelectron spectroscopy, and reflection-absorption Fourier transform infrared spectroscopy. The Langmuir films were stable at the air-water interface as long as they were not exposed to UV irradiation. The LB films formed disorganized layers, which gradually blocked the permeation of different species with increasing the number of deposited layers. The thickness was ca. 4-7 ? per layer. Irradiating the Langmuir films caused their cross-linking at the air-water interface. Furthermore, we took advantage of the reactivity of the double bond of the LB films on the solid supports and graft polymerized acrylic acid on top of the 1,2-pbd layers. This approach is the basis of the formation of an asymmetric membrane that requires different porosity on both of its sides.     

Molecular Orientation and Structure in LB Films of a Liquid Crystal MPUOPM Investigated by UV-Vis and IR Spectroscopy

"?Langmuir monolayers and LB films of 4-((s)-2-methylbutoxy)phenyl-(4'-(10-undecen-1-oyloxy)phenyl) methylenimine (MPUOPM) were investigated by ultraviolet-visible, polarized infrared spectroscopy. ?-A isotherms showed well-defined Langmuir monolayers were formed at an air/water interface for the MPUOPM and their mixture with SA. An inflection point at 13 mN/m appeared on the isotherm, which was due to the transition from the monolayer to multilayer. The polarized IR spectra of LB films of MPUOPM had provided new insight into the molecular orientation and structure. In LB films, the tilted angle between the alkyl chain and the normal line of the substrate was 48ffi, the tilted angle between the dipole moment of C=N and the normal line of the substrate was 51ffi. The alkyl chains assumed a trans-zigzag conformation but it included a few gauche conformers. The C=N groups were almost in one plane in the LB films. "     

Effective length of the alkyl chain and thermal behaviors of Langmuir–Blodgett films of octadecylammonium laurate, octadecylammonium octadecanoate and octadecylammonium tetracosanoate

Thermal behaviors of 11-layer Langmuir–Blodgett (LB) films of the double long-chain compounds of octadecylammonium laurate (ODALA), octadecylammonium octadecanoate (ODASA) and octadecylammonium tetracosanoate (ODATA) have been investigated by Fourier transform infrared spectroscopy. The temperature-dependent infrared spectra show that thermal stability of the three kinds of LB films depends upon the length of the hydrocarbon chain. The LB film of ODALA undergoes an order–disorder transition in the temperature range of 50–65 °C. In contrast, the ODATA LB film has the phase transition temperature range of 80–90 °C. Of particular interest is that both ODASA and ODATA LB films have nearly the same phase transition temperature range of 80–90 °C, indicating that the replacement between tetracosanoic acid and stearic acid has little effect on the thermal stability of the two compounds. The above observations suggest that the effective length of the alkyl chains, which is determined by the component with a shorter chain in the double long-chain compounds, has a dominant influence on the thermal stability. It is very likely that the whole chain of the shorter chain component such as octadecylamine in ODATA has contribution to the thermal stability while only the effective length of the longer alkyl chain component gives a significant effect.     

Synthesis of novel hybrid films of a layered silicate and alkylammonium cations on rough polymeric surfaces by Langmuir–Blodgett method

Hybrid films of a layered silicate and an amphiphilic alkylammonium (hexadecyltrimethylammonium) cation have been prepared by Langmuir–Blodgett (LB) method and transferred onto a polyamide surface by dip coating. This is the first time that stable LB hybrid monolayer and multilayer films have been formed on rough polymeric surfaces. The films were characterized by X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and water contact angle measurements. XRD and FTIR showed that the hybrid multilayer was well-organized and the thickness of one layer was calculated to be 1.6 nm. Furthermore, the layered silicate was determined to be on the substrate side and the amphiphilic molecule layer was exposed to the air side. This provides a novel methodology for the surface modification of polymers.