Dissolution of cellulose [correction of cellose] with ionic liquids

We report here initial results that demonstrate that cellulose can be dissolved without activation or pretreatment in, and regenerated from, 1-butyl-3-methylimidazolium chloride and other hydrophilic ionic liquids. This may enable the application of ionic liquids as alternatives to environmentally undesirable solvents currently used for dissolution of this important bioresource.     

Stereoselective halogenations of alkenes and alkynes in ionic liquids

[reaction: see text]. Room-temperature ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium bromide, and 1-butyl-3-methylimidazolium chloride, are used as "green" recyclable alternative to chlorinated solvents for the stereoselective halogenation of alkenes and alkynes.     

Interactions of Ionic Liquids with Polysaccharides – 2: Cellulose

Some general comments about ionic liquids (ILs) and carbohydrates are given. The main scope of the review is to discuss the present state of the art of chemical modification of cellulose applying IL as reaction media considering own research results. ILs, namely 1-butyl-3-methylimidazolium chloride (BMIMCl), 1-ethyl- 3-methylimidazolium chloride (EMIMCl), 1-butyl-2,3-dimethylimidazolium chloride (BDMIMCl), 1-allyl-2,3-dimethylimidazolium bromide (ADMIMBr) and 1-ethyl-3- methylimidazolium acetate (EMIMAc) are solvents for cellulose (even for high molecular bacterial synthesized cellulose) and can easily be applied as reaction media for cellulose modification. We investigated the homogeneous acylation, carbanilation and silylation of the biopolymer cellulose. Under mild conditions and within short reaction time at low temperature (65 °C to 80 °C) and low excess of reagent, various cellulose esters and carbanilates, dendronized cellulose and trimethylsilyl cellulose were obtained. The DS of the cellulose derivatives can be controlled by varying the reaction time, reaction temperature and the IL used as reaction medium.     

Dissolution of cellulose in ionic liquids as a way to obtain test materials for metal-ion detection

Cellulose films containing entrapped analytical reagents suitable for metal-ion detection are produced by joint dissolution of cellulose and the reagents in ionic liquids then precipitation with water. The conditions of preparation of these test materials have been optimized and their properties have been studied. The film obtained by use of the ionic liquid 1-butyl-3-methylimidazolium chloride and 1-(2-pyridylazo)-2-naphthol has been used for colorimetric determination of divalent zinc, manganese, and nickel with detection limits at the 10⁻⁶ mol L⁻¹ level.     

壳聚糖在4种咪唑型离子液体中溶解性的研究

研究、比较了壳聚糖在4种咪唑型离子液体氯化1-丁基-3-甲基咪唑([BMIM]Cl)、1-丁基-3-甲基咪唑醋酸盐([ BMIM] Ac)、1-乙基-3-甲基咪唑醋酸盐([EMIM] Ac)和氯化1-烯丙基-3-甲基咪唑([AMIM] Cl)中的溶解性,提出了可能的溶解机理,并利用红外光谱(FTIR)、热重分析(TGA...     

Ring-Opening Polymerization of Ethylene Carbonate Catalyzed with Ionic Liquids: Imidazolium Chloroaluminate and Chlorostannate Melts

Ring-opening polymerization of ethylene carbonate in the presence of ionic liquids, 1-butyl-3-methylimidazolium chloroaluminate melt and 1-butyl-3-methylimidazolium chlorostannate melt, has been investigated. Polymerization takes place accompanied with decarboxylation even at temperatures below 100°C under the reaction conditions selected to give poly(ethylene ether-carbonate)s.     

An unexpected reaction between 5-hydroxymethylfurfural and imidazolium-based ionic liquids at high temperatures

A new compound was detected during the production of 5-hydroxymethylfurfural (HMF) from glucose and cellulose in the ionic liquid 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) at high temperatures. Further experiments found that it was derived from the reaction of HMF with [Bmim]Cl. The structure of new compound was established as 1-butyl-2-(5'-methyl-2'-furoyl)imidazole (BMI) based on nuclear magnetic resonance and mass spectrometry analysis, and a possible mechanism for its formation was proposed. Reactions of HMF with other imidazolium-based ionic liquids were performed to check the formation of BMI. Our results provided new insights in terms of side reactions between HMF and imidazolium-based ionic liquids, which should be valuable for designing better processes for the production of furans using biomass and related materials.     

Homogeneous tritylation of cellulose in 1-butyl-3-methylimidazolium chloride

1-Alkyl-3-methylimidazolium-based ionic liquids, having chloride as a counter ion, were studied for cellulose solubility; and the influence of different alkyl chain lengths was also investigated. The alkyl chain length was incrementally varied from ethyl to decyl to determine structure-dissolution properties; a distinct odd-even effect was observed for short chain lengths. In addition, the tritylation of cellulose was performed in 1-butyl-3-methylimidazolium chloride using pyridine as base. The influences of reaction time and the ratio of trityl chloride per cellulose monomer unit on the degree of substitution were investigated in detail by elemental analysis and 1H NMR spectroscopy. A DS of around 1 was obtained after 3 h reaction time using a six fold excess of trityl chloride.     

Glycolysis of poly(ethylene terephthalate) (PET) using basic ionic liquids as catalysts

The glycolysis of poly(ethylene terephthalate) (PET) was studied using several ionic liquids and basic ionic liquids as catalysts. The basic ionic liquid, 1-butyl-3-methylimidazolium hydroxyl ([Bmim]OH), exhibits higher catalytic activity for the glycolysis of PET, compared with 1-butyl-3-methylimidazolium bicarbonate ([Bmim]HCO₃), 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) and 1-butyl-3-methylimidazolium bromide ([Bmim]Br). FT-IR, ¹H NMR and DSC were used to confirm the main product of glycolysis was bis(2-hydroxyethyl) terephthalate (BHET) monomer. The influences of experimental parameters, such as the amount of catalyst, glycolysis time, reaction temperature, and dosages of ethylene glycol on the conversion of PET, yield of BHET were investigated. The results showed a strong influence of the mixture evolution of temperature and reaction time on depolymerization of PET. Under the optimum conditions of m(PET):m(EG): 1:10, dosage of [Bmim]OH at 0.1 g (5 wt%), reaction temperature 190 °C and time 2 h, the conversion of PET and the yield of BHET were 100% and 71.2% respectively. Balance between the polymerization of BHET and depolymerization of PET could be changed when the reaction time was more than 2 h and contents of catalyst and EG were changed.     

Dissolution and forming of cellulose with ionic liquids

The dissolution of cellulose in different ionic liquids will be described as a very recent subject for a direct dissolving process, which was used to prepare regenerated cellulose fibres. The preparation of the dopes was arranged starting from slurry of cellulose in the aqueous ionic liquid by removing the water at elevated temperature, vacuum and high shearing rates. As ionic liquids, the 1-N-Butyl-3-methylimidazolium chloride, the 1-Ethyl-3-methylimidazolium chloride, the 1-N-Butyl-2,3-dimethylimidazolium chloride, the 1-N-Butyl-3-methylimidazolium acetate and the 1-Ethyl-3-methylimidazolium acetate were investigated. The cellulose solutions in ionic liquids were characterised by means of light microscopy, cone-plate rheometry and particle analysis. In addition these results were compared with cellulose solutions in N-methyl-morpholine-N-oxide monohydrate. Finally the cellulose dopes were shaped by a dry-wet spinning process to manufacture cellulose fibres. The properties of the resulted fibre had been determined and will be discussed.     

Effect of the conditions of anodizing on the morphology of nanotitania

The effect the current density, treatment time, surface pretreatment, and electrolyte composition have on the morphology of titania obtained via electrochemical treatment in such ionic liquids (ILs) as 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium chloride [BMIM]Cl is studied. The anodic formation of titania nanostructures in the form of nanotubes or nanorods is found to occur in times of up to 100 s. The role of water in the formation of these titania nanostructures is shown. Pretreatment has no effect on the morphology of the formed oxide. The formation of products that are poorly soluble in ILs (e.g., hydrated oxides) results in the emergence of a layer partially covering the open parts of nanotubes, preventing their further growth.     

Determination of ethanol in ionic liquids using headspace solid-phase microextraction–gas chromatography

The application of ionic liquids (ILs) as nonderivatizing solvents for the pretreatment and regeneration of cellulose is a growing area of research. Here we report the development of a rapid and simple method for the determination of residual ethanol content in two hydrophilic ILs, 1-butyl-3-methylimidazolium chloride and 1-ethyl-3-methylimidazolium acetate. The method utilizes headspace solid-phase microextraction coupled with gas chromatography at elevated extraction temperatures, resulting in rapid equilibration times. The effect of IL water content on the ethanol extraction efficiency is presented. Recovery experiments carried out in real samples gave recoveries ranging from 96.8 to 98.2%.     

Oscillating electrochemical reaction in copper-containing imidazolium ionic liquids

An example of an electrochemical oscillator in ionic liquids is presented. Solutions of the ionic liquid 1-ethyl-3-methylimidazolium chloride, [C(2)mim]Cl, which contain both Cu(+) and Cu(2+) ions, show current oscillations during potentiostatic polarization. The oscillations were analyzed by the Quartz Crystal Microbalance (QCM) technique and by Electrochemical Impedance Spectroscopy (EIS). The electrochemical oscillations are of the N-NDR-type, because the low frequency end of the impedance spectrum has negative real impedances. The oscillating current leads to an oscillating growth speed of a metallic copper layer. Besides the presence of both Cu(+) and Cu(2+), the presence of chloride is a necessary, yet not a sufficient, condition for the occurrence of current oscillations. Oscillating currents were also observed for the ionic liquids 1-butyl-3-methylimidazolium chloride and 1-butyl-2,3-dimethylimidazolium chloride, but not for tributyltetradecylphosphonium chloride and N-butylpyridinium chloride.     

Ionic liquids as modulators of the critical micelle concentration of sodium dodecyl sulfate

Critical micelle concentration (CMC) of sodium dodecyl sulfate (SDS), an anionic surfactant, has been investigated in aqueous solutions of a variety of room temperature ionic liquids (RTILs): 1,3-dimethylimidazolium iodide (Me2IM-I, 2), 1-butyl-3-methylimidazolium chloride (BMIM-Cl, 3), 1-hexyl-3-methylimidazolium chloride (HxMIM-Cl, 4), 1-methyl-3-octylimidazolium chloride (MOIM-Cl), 5, and 1-methyl-3-octylimidazolium tetrafluoroborate (MOIM-BF4, 6). The CMC of SDS is shown to correlate with the nature of the alkyl groups in the RTILs; SDS showed appreciably higher CMCs in presence of ionic liquids 2 and 3, whereas in the presence of ionic liquids 4, 5, and 6 much smaller CMCs were observed. The nature of the gigenions, Cl- or BF4-, has no noticeable effect on the observed CMC values.     

Synthesis of Nanotitania on the Surface of Titanium Metal in Ionic Liquids: Role of Water Additions

The anodic oxidation of a titanium metal electrode in two ionic liquids was studied of amorphous titania nanostructures were obtained. The nanostructures are formed only in the case where a hydrophilic ionic liquid (1-butyl-3-methylimidazolium chloride) with addition of some water is used as the electrolyte. The role of water is to provide a sort of construction material (source of oxygen) for titania nanostructures. In the hydrophobic ionic liquid (1-butyl-3-methylimidazolium), the thickness of the anodic oxide increases and no nanostructures are formed.     

Dissolution and regeneration of polybenzimidazoles using ionic liquids

We report here the initial results that polybenzimidazole can be dissolved in and regenerated from, 1-butyl-3-methylimidazolium chloride and other hydrophilic ionic liquids, which may enable the application of ionic liquids as alternatives to environmentally undesirable solvents currently used for dissolution of this polymer.     

Analysis of Hydrogen Bonding Network in the Systems Containing Chloride-Based Ionic Liquids with Cellulose/Cellobiose by Fourier-Transform Infrared Spectroscopy

Hydrogen bonds formed upon dissolution of cellulose and cellobiose in ionic liquids, 1-butyl-3- methylpyridinium and 1-butyl-3-methylimidazolium chlorides, have been analyzed and characterized by means of Fourier-transform infrared spectroscopy and quantum-chemical calculation. The obtained data have been used for assignment of absorption bands of individual OH groups and determination of hydrogen bonds energy in the solutions.     

细胞色素C在离子液体修饰电极上的电化学行为

分别合成了疏水和亲水性咪唑类离子液体,并制备了相应的两种离子液体修饰的玻碳电极。循环伏安法测量结果显示,细胞色素C在离子液体修饰的玻碳电极上的电子传递过程为一扩散控制的准可逆反应,表明咪唑类离子液体也可用作细胞色素C电子传递的有效促进剂。电化学交流阻抗谱的测量结果得到了与循环伏安相同的结论。     

Alkylation of aromatic compounds with multi-component Lewis acid catalysts of ZnCl2 and ionic liquids with different organic cations

Alkylation of aromatic compounds with various alkylating agents such as benzyl chloride, benzyl alcohol and isopropyl chloride were investigated using ZnCl₂ based ionic liquid (ILs) Lewis acid catalysts. Multi-component Lewis acid catalysts of ZnCl₂ and ionic liquids such as 1-butyl-3-methylimidazolium bromide, 1-butylpyridinium bromide, cholin chloride and tetrabutylammonium bromide were prepared, supported on silica gel, and compared for alkylation reactions with various alkylating agents. Among the IL-based catalysts, 1-butyl-3-methyl imidazolium-bromide-ZnCl₂ and 1-butylpyridinium bromide-ZnCl₂ are highly active.     

Fabrication and characterization of transparent and biodegradable cellulose/poly (vinyl alcohol) blend films using an ionic liquid

Biodegradable blends were prepared from cellulose and poly (vinyl alcohol) (PVA) using the ionic liquid (IL) solvent, 1-butyl-3-methylimidazolium chloride. The blends were regenerated into films, fibers and rectangular blocks. The films showed optical transparency throughout the entire composition of the blends. The infrared spectroscopic experiments proved the existence of intermolecular hydrogen bonding interactions between the hydroxyl groups of cellulose and PVA. The miscibility between cellulose and PVA lead to increase in glass transition temperature (T _g) and of decrease in crystallinity of the blends. The T _g-composition data showed a negative deviation from Fox predictions, however fit well with BCKV model. The addition of PVA improved the tensile strength and elongation at break, considerably plasticizing cellulose. The blends can be degraded completely in soil. Moreover, the IL was completely recycled with high yield after the processing.