密集波分复用条件下的光轨网络串扰分析与仿真

光轨网络是一种能够利用成熟的光学器件实现带宽灵活分配和信息交换的新型网络.串扰是限制光轨网络的物理层性能及其扩展性的重要因素.本文讨论了典型的光轨网络节点中异频串扰和同频串扰的产生原因,理论分析了两者对光轨网络的物理层传输性能的影响.给出了3种串扰性能的评价方法.以密集波分复用技术为应用背景,分别搭建了器件隔离度为20dB和30dB的、具有3个节点5个波长且单波长速率为2.5Gbps的光轨网络,仿真了串扰在光轨网络中的传播过程,并计算了光轨网络的误码率、功率代价和相对串扰.理论分析和仿真结果表明:光滤波器、解复用器和复用器是光轨网络中串扰产生的关键器件,且提高器件的隔离度等性能对于提高光轨网络的传输性能会有较显著的效果;在密集波分复用条件下,串扰对单波长速率为2.5Gbps的光轨网络的误码率和功率代价具有显著的影响,从而限制了光轨网络实际可用的节点数目.     

密集波分复用条件下的光轨网络串扰分析与仿真

光轨网络是一种能够利用成熟的光学器件实现带宽灵活分配和信息交换的新型网络.串扰是限制光轨网络的物理层性能及其扩展性的重要因素.本文讨论了典型的光轨网络节点中异频串扰和同频串扰的产生原因,理论分析了两者对光轨网络的物理层传输性能的影响.给出了3种串扰性能的评价方法.以密集波分复用技术为应用背景,分别搭建了器件隔离度为20 dB和30 dB的、具有3个节点5个波长且单波长速率为2.5 Gbps的光轨网络,仿真了串扰在光轨网络中的传播过程,并计算了光轨网络的误码率、功率代价和相对串扰.理论分析和仿真结果表明:光滤波器、解复用器和复用器是光轨网络中串扰产生的关键器件,且提高器件的隔离度等性能对于提高光轨网络的传输性能会有较显著的效果;在密集波分复用条件下,串扰对单波长速率为2.5 Gbps的光轨网络的误码率和功率代价具有显著的影响,从而限制了光轨网络实际可用的节点数目.     

基于量子点半导体光放大器全光波长变换特性

从光电集成电路的角度出发,根据量子点半导体光放大器(QD-SOA)中载流子跃迁速率方程和光场传输方程,建立了QD-SOA等效电路模型,并通过电路仿真的方法对QD-SOA的增益谱、饱和增益特性等进行了仿真和分析;利用QD-SOA的交叉增益调制研究了速率分别为40Gbps、100Gbps和160Gbps时的波长转换特性,并分析了不同的偏置电流、功率的信号光和探测光对输出信号消光比和Q值的影响,其转换速率可达到100Gbps,消光比ER约为10dB,Q值约为2.2.该研究对提高基于QD-SOA的交叉增益调制波长转换的性能具有指导意义.     

基于半导体光放大器和光滤波器的全光非归零码到归零码的转换

利用半导体光放大器模型和仿真软件对全光非归零码到归零码的变换进行了数值仿真.在仿真结果的基础上,实现了基于半导体光放大器和光滤波器的10 Gbps的全光非归零码到归零码的变换试验.试验结果显示在RZ码输入功率为－15 dBm时,该变换的误码率为1.0×10－9.     

看得见的无线通信技术——可见光通信

可见光通信作为新一代信息技术,除了为移动通信拓展频谱资源外,还具备高速、大容量、安全、节能的技术特点。现有射频通信的5G、6G技术方案能耗很高,而照明、显示用的LED已经无处不在,所以可见光通信将来可用于实现普适的万物光互连。商用照明的荧光型LED器件的带宽有限,通过均衡技术已经把可见光通信系统的3 d B带宽拓展到了600 MHz,单路二进制开关键控实时通信速率达到了1.39 Gbps。如果采用高阶调制和波分复用技术,多色LED光源的非实时通信总速率已经超过15 Gbps。灯光上网、灯光定位和智能家居系统等创新应用证明了可见光通信与照明或显示融合不是梦,预示看得见的光无线通信将引起更大的技术变革。     

超高速光纤耦合声光调制器的设计及其应用

为实现小于10 ns光脉冲上升时间的超高速声光调制,该文提出一种光纤耦合声光调制器光脉冲时域响应的理论设计仿真方法。利用该方法对1064 nm和1550 nm工作波长光纤耦合声光调制器进行了仿真,结果预测器件的光脉冲上升时间分别为9.4 ns和9.1 ns;通过器件制作和测试验证,两个波长的器件实测光脉冲上升时间分别为9.74 ns和9.22 ns,实测与理论仿真结果偏差较小。文章最后对器件在超快光纤激光器种子源光脉冲选单、光纤水听阵列时分复用及潜在的宽带移频应用进行了介绍。     

具有旋转连接功能的双层光互连网络设计

在设计的双层光互连网络中,上层网络是星型连接,依靠数字路由结点进行通信.单通道最大传输速率为1.4 Gbps,数字路由结点吞吐率大于10 Gbps,底层为网络接口卡和结点机连成的环形网,峰值传输速率为1.056 Gbps.在底层网络中个别结点机与传感器之间配置有光纤旋转连接器,可传输动态数据.经计算,环网内最大通信延迟时间小于5.292 μs,互连网络的平均通信延迟时间为11.03 μs,环形网络的最大数据传输带宽为50 Mbit/s.     

基于25G级光器件的50Gbit/s NRZ IM-DD下行传输系统

4阶脉冲幅度调制信号对光电器件的线性度要求较高,色散容限较小;10G级光器件的带宽限制严重影响系统性能。描述了采用商用25G级光器件实现50 Gbit/s非归零码(NRZ)信号的传输实验方案。分别在背靠背和25 km标准单模光纤传输情况下,使用最大似然序列估计和基于最小均方误差算法的判决反馈均衡进行译码。通过比较不同接收光功率条件下的误码率性能,证明了基于25G级光器件的50 Gbit/s NRZ信号传输能够作为单路50 Gbit/s的候选方案。     

非线性一维光子晶体光开关与光双稳

设计和制备了ZnS/ZnSe叠层共 2 0个周期的非线性一维光子晶体光开关与光双稳器件 理论模拟了波长 5 14 .5nm的氩离子激光 ,在阈值功率密度 1.0× 10 5W/cm2 下 ,完全移出光子禁带 ,实现了光开关 同一器件也可作为光学双稳器件 ,实验测出其阈值功率密度为 1.38× 10 5W/cm2 ,双稳开关时间为 10 0ps 理论与实验结果基本一致     

双折射对基于半导体光放大器的干涉型器件性能影响的模拟分析研究

分析了半导体光放大器中双折射对基于半导体光放大器的干涉型器件性能的影响，对基于半导体光放大器的马赫—曾德尔型波长转换器的理论计算表明，当半导体光放大器有双折射存在时，消光比不仅要比无双折射时的要低，而且还随着探测光的偏振态而改变，变化幅度可大于10dB。提出了减小双折射对干涉型器件影响的方案，并且分析了实现对增益和对相位变化同时具有偏振不灵敏的半导体光放大器的可能性。     

Design of wavelength adjustable lasers with photonic crystal based Fabry-Perot etalon for applications in optical network units of wavelength-division-multiplexed passive optical network systems

We propose a novel wavelength adjustable laser (WAL) with a photonic crystal based Fabry-Perot (FP) etalon. This laser will be a promising light source for optical network units (ONUs) of conventional wavelength-division-multiplexed passive optical network (WDM-PON) systems for up-stream transmission. It has the merits of a relatively simple fabrication and operation, wide process tolerance, low-cost, high side-mode suppression ratio, and wavelength-tunable characteristics. The optimization of the device structure and the implementation methods for this type of laser are discussed. Although the WALs in WDM-PON systems are not colorless, each laser can cover several wavelengths. Thus, the required number of different ONUs can be reduced. This approach may be necessary for 10 Gbps upstream transmission in next-generation optical access networks because the 10 Gbps data rate is difficult to achieve by using current colorless schemes.     

Comparison of various dispersion compensation techniques at high bit rates using CSRZ format

In this paper, the dispersion compensation techniques are compared on the basis of eye opening, eye closure, bit error rate and Q-factor. These techniques are applied to CSRZ system, which operates at bit rates of 2.5, 5, 10, 15 and 20 Gbps bit rates. The technique using fiber Bragg grating (FBG) for dispersion compensation is the best technique as this technique gives larger values of eye opening at 10 and 20 Gbps bit rate, smaller values of eye closure at 10 and 20 Gbps, minimum value of BER at 15 Gbps and maximum value of Q-factor at 15 Gbps when compared with other techniques. The RDF technique is the next best technique since this technique gives maximum value of eye opening when other techniques give almost similar values of eye opening at 15 Gbps, minimum value of eye closure at 15 Gbps, minimum value of BER at 15 Gbps and maximum value of Q-factor at 15 Gbps when compared with other techniques. The DCF is the next best technique as this technique gives maximum and minimum values of eye opening and eye closure at 20 Gbps (next best to FBG at 20 Gbps).     

21 km，5 Gbps，0.14 THz无线通信系统设计与试验

设计了工作在太赫兹频段的无线通信系统,基带部分采用16QAM调制体制,射频部分采用混频器实现两级上下变频,功放部分采用固态功率放大+电真空器件放大级联的功率放大技术,实现了0.14 THz频段W量级的功率输出。接收端采用全固态常温接收技术,接收机等效噪声温度为1100 K,接收灵敏度达到-57 dBm。采用两个增益50 dBi的卡塞格伦天线,在成都市双流区与新津县之间开展了距离21 km的无线通信试验,单路实时通信速率达到5 Gbps,误码率低于10-6。并成功同时实时传输了两路符合HD-SDI标准的无压缩高清视频数据流,每一路的标准有效速率达到1.485 Gbps。     

Study of Internal Wavelength Locker Integrated 10 Gbps Electro-Absorption Modulated Laser Modules in Metro DWDM Applications

Several different divergences are tested in the several internal wavelength locker schemes for 10 Gbps electro-absorption modulated laser (EML) module. A 10 Gbps EML module with a simple and robust internal wavelength locker for metro dense WDM application is successfully demonstrated. The wavelength aging over 2000 h is done at elevated temperature of 70°C. The average wavelength drift of 10 modules is measured to be ± 5 pm. These modules can be successfully applied to the 10 Gbps DWDM systems with 50 GHz channel spacing.     

A cost effective 100 Gbps hybrid MDM–OCDMA–FSO transmission system under atmospheric turbulences

FSO or free space optics is a familiar name used in a wide array of applications in the area of telecommunications. Due to its features of low maintenance cost and deployment time, most of the applications consider FSO as the alternative solution for appropriately replacing fiber optics. In this work, we have designed 100 Gbps FSO system by combining mode division multiplexing (MDM) and optical code multiple access scheme (OCDMA). Ten channels, each carrying 10 Gbps data, are transported over 8 km FSO link by using MDM of two Laguerre Gaussian modes and random diagonal codes. Moreover, the performance of proposed MDM–OCDMA–FSO system is also investigated under atmospheric turbulences.     

Transmission of high-data-rate optical signals through a micrometer-scale silicon ring resonator

The effects of a micrometer-scale silicon ring resonator with a FWHM of 0.078 nm (9.6 GHz) on a nonreturn to zero amplitude-modulated optical signal with a modulation rate of 10 Gbps are experimentally investigated. By transmitting the optical signal through the device, significant spectral distortion and side band attenuation is introduced, as characterized by amplitude Bode plots, and a power penalty of 0.8 dB is observed. Carrier wavelengths within the transmission resonance, but detuned from the center wavelength, are investigated as well. Numerical simulations further support the experimental results.     

Simulation and analysis of dispersion compensation schemes for 100 Gbps PDM–OFDM optical communication system

In this paper, the implementation of 100 Gbps optical communication system exploiting polarization diversity at transmitter and receiver is developed and investigated with pre-, post- and symmetrical dispersion compensation schemes by using dispersion shifted and dispersion compensated fibers through simulations to optimize high data rate optical transmission. Motivation to the current analysis is to compare all 3 compensation schemes and it's found that the pre compensation technique is superior to post and symmetrical compensation techniques in 100 Gbps PDM–OFDM communication system. On examination of symmetrical and post dispersion compensation schemes, it's found that the later is superior to the previous in this case. A 100 Gbps coherent optical OFDM workplace has been discovered in which two 50 Gbps data streams are combined into one wavelength by polarization beam combiner. By comparing one can get a promising system to the symmetrical high capacity access network with high spectral efficiency, cost effective, good flexibility.     

The generation of optical duobinary signal using electroabsorption modulator for optical access networks

We generate the duobinary signal by utilizing the intensity modulation characteristic of the electroabsorption modulator and the phase characteristic of phase shifter for the high-speed transmission system. In addition, compared to those commercial 10 Gbps OOK modulators, lower cost, better performances and easier integration can be achieved by using these duobinary modulators.     

High-efficiency,high-speed VCSELs for optical interconnects

High-efficiency, high-speed, tapered-oxide-apertured vertical-cavity surface-emitting lasers (VCSELs) emitting at 980 nm have been demonstrated. By carefully engineering the tapered oxide aperture, the mode volume can be greatly reduced without adding much optical scattering loss for the device sizes of interest. Consequently, these devices can achieve higher bandwidth at lower current and power dissipation. In addition, the parasitics are reduced by implementing deep oxidation layers and an improved p-doping scheme in the top mirror. Our devices show modulation bandwidth exceeding 20 GHz, a record for 980 nm VCSELs. Moreover, 35 Gb/s operation has been achieved at only 10 mW power dissipation. This corresponds to a data-rate/power-dissipation ratio of 3.5 Gbps/mW. Most importantly, our device structure is compatible with existing manufacturing processes and can be easily manufactured in large volume making them attractive for optical interconnects.