微波消解-氢化物发生原子荧光光谱法同时测定化肥中砷、汞含量

采用微波消解样品前处理手段以及双道原子荧光光度计,建立了微波消解一氢化物发生原子荧光光谱法同时测定化肥中砷、汞含量的方法。通过试验确定了样品前处理方法,对负高压、灯电流,载气、屏蔽气、原子化器高度、酸度等测试条件进行了优化。在优化的工作条件下,砷、汞含量分别在0-50ng／mL和0—1．0ng／mL范围内与荧光强度呈良好的线性关系,线性相关系数分别为0．9996,0．9996,检出限分别为0．085,0．008ng／mL,回收率分别为88．8％～107．4％,90．0％～120％,测定结果的相对标准偏差均小于7％（n=6）。     

氢化物-原子荧光法同时测定大米中的砷和硒

采用氢化物-原子荧光光谱法测定大米中的砷和硒。在0～10μg／L范围内,砷和硒的浓度与荧光强度呈线性关系,相关系数分别为0．9996和0．9998,加标回收率分别为96．2％～100．8％和98．1％～107．6％,砷、硒测定结果的相对标准偏差分别不大于6．8％,5．7％（n=6）。     

原子荧光光谱法同时测定农产品中砷和汞

研究了用AFS-920型双道原子荧光光度计同时测定食品中砷和汞的方法。方法快速、相对标准偏差小于10％，砷和汞的回收率分别为88．0-107．0％和89．8％-114．0％，符合国标对农产品安全质量检测的要求。     

流动注射氢化物发生双道原子荧光同时测定水中汞和硒

环境水样中汞和硒的测定,文献提出汞的测定方法有冷原子吸收光谱法、原子荧光光谱法和双硫腙比色法,而硒为原子荧光光谱法和石墨炉原子吸收光谱法。本文用双道原子荧光光谱仪同时测定水中汞和硒,方法更为简便快速,准确可靠。     

氢化物发生-原子荧光光谱法测定海洋沉积物中砷、锑、铋、汞、硒

提出了用盐酸-硝酸-水(3+1+4)混合酸消解样品,氢化物发生-原子荧光光谱法测定海洋沉积物样品中砷、锑、铋、汞、硒的方法。考察了原子荧光光谱仪的最佳工作条件。在最佳条件下砷、锑、铋、硒的检出限(3s/k)分别为0.018,0.004,0.001,0.003μg.g-1,汞的检出限(3s/k)为0.604ng.g-1。应用于3种海洋沉积物标准物质的测定,测定值与标准值吻合。     

原子荧光光谱法快速测定出土文物体及周围土壤中砷与汞的研究

采用王水分解试样,原子荧光光谱法（AFS）测定了出土文物体及周围土壤中的砷、汞。结果表明,该测定的相对标准偏差分别为：0．8％～1．0％;1．4％～1．5％。方法回收率分别为：97．0％～102．0％;98．0％～104．0％。该法具有简便、快速、准确等优点,结果令人满意。     

氢化物发生-双道原子荧光光谱法同时测定钢中砷和锑

建立了一种氢化物发生双道原子荧光光谱法同时测定钢中痕量砷和锑的方法．对实验条件进行了优化,在最佳工作条件下,砷和锑的检出限分别为0．012ng／g和0．034ng／g,RSD分别为1．24％和1．97％．将本法应用于钢中的砷和锑的测定,采用加标回收实验控制方法的准确性,砷的回收率为96％～98％,锑的回收率98％～102％．     

原子荧光法测定食品中砷和硒

采用氢化物发生-原子荧光光度法测定食品中砷和硒。砷和硒的相对标准偏差分别为1．17％和1．19％,检出限分别为0．28和0．40ng·ml-1。线性范围为0～100ng·ml-1,砷和硒的相关系数分别为0．9998和0．9999。砷和硒的回收率分别为95．8％～105．4％和98．5％～103．5％。     

微波消解-氢化物发生原子荧光法测定塑料原料及其制品中的砷、汞

采用微波消解进行样品前处理，以硫脲为预还原剂，用氢化物发生原子荧光法测定塑料原料及其制品中的砷、汞。测定砷和汞的线性范围均为0～8μg／L，砷、汞的检出限分别为0．005、0．076μg／L，测定结果的相对标准偏差分别为4.96％～7．38％、2．94％～7．20％(n=6)，回收率分别为92．0％～103．2％、92．0％～98.0％。     

高压釜消解-氢化物发生原子荧光光度法测定土壤中的砷、硒

对高压釜密封消解一氢化物发生原子荧光法测定土壤中砷、硒的方法进行了研究。采用HNO3-HClO4作消解剂，在最佳的消解条件和测定条件下，测定砷、硒的线性回归方程分别为I=244．1c 1．03、I=88．26c 2．86．线性范围均为0．50～10．00μg／L，相关系数均为0．9999，检出限均为0．0002μg/mL。测定土壤中砷、硒的回收率分别为90％～105％、89％～104％，RSD分别为2．2％～4．0％、1．9％～3．1％。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.