Synthesis and Catalytic Activity of the Fe(II) and Fe(III) Complexes with a New Polydentate Ligand Containing an Amide Donor

The iron complexes [Fe²⁺(tpcaH)(MeCN)₂](ClO₄)₂ (I) and [Fe₂O(tpca)₂(H₂O)₂](ClO₄)₂ (II) based on the new potentially tetradentate ligand bis(2-pyridyl)methyl-2-pyridylcarboxamide (tpcaH) with the amide donor group inside the molecule were synthesized. The composition of the complexes was confirmed by elemental and mass spectrometric analyses and various spectral methods. Compounds I and II exhibited good catalytic activity in the stereospecific oxidation of alkanes by hydrogen peroxide.     

New phenanthroline iron complexes: Synthesis and catalytic activity in alkane oxidation with hydrogen peroxide

New binuclear iron complexes with labile coordination sites, [Fe₂OL₄(H₂O)₂](ClO₄)₄ where L stands for hydrophobic phenanthroline (phen) bearing electronegative and lipophilic substituents (Cl, Br, C₂H₅, C₆H₅, C₆H₁₃), are synthesized. The stereospecificity, alcohol/ketone ratio, regioselectivity, and substituent effect in the hydroxylation of alkanes (cyclohexane, adamantane, cis-1,2-dimethylcyclohexane) with hydrogen peroxide catalyzed by these complexes are studied. The said parameters, as well as a decrease in the alkane oxidation regioselectivity with increasing hydrogen peroxide concentration, are similar to the respective parameters for mononuclear iron complexes of tetradentate ligands. The results confirm that regardless of the nature of chelating ligands, the same mechanism operates in both cases, namely, the transfer of an oxygen atom with the participation of ferryl intermediates.     

Synthesis,crystal structures,and catalytic properties of phenoxo-bridged dinuclear manganese(III) complexes with bis-Schiff bases

Two structurally similar centrosymmetric phenoxo-bridged dinuclear manganese(III) complexes, [Mn₂(L¹)₂(N₃)₂] (1) and [Mn₂(L²)₂(NCS)₂] (2), were prepared from the tetradentate bis-Schiff base ligands, N,N’-bis(salicylidene)propane-1,2-diamine (H₂L¹) and N,N’-bis(salicylidene)ethane-1,2-diamine (H₂L²), respectively, in the presence of pseudohalides. The complexes have been characterized by FTIR, elemental analyses, and molar conductivity. Structures of the complexes have been confirmed by single-crystal X-ray determination. The bis-Schiff base ligands coordinate with Mn through their phenolate oxygen and imino nitrogen. Each Mn is an octahedral. The complexes showed that they exhibit high activity in catalytic olefin oxidation.     

Oxidative degradation of the organometallic iron(II) complex [Fe{bis[3‐(pyridin‐2‐yl)‐1H‐imidazol‐1‐yl]methane}(MeCN)(PMe3)](PF6)2: structure of the ligand decomposition product trapped via coordination to iron(II)

Iron is of interest as a catalyst because of its established use in the Haber–Bosch process and because of its high abundance and low toxicity. Nitrogen‐heterocyclic carbenes (NHC) are important ligands in homogeneous catalysis and iron–NHC complexes have attracted increasing attention in recent years but still face problems in terms of stability under oxidative conditions. The structure of the iron(II) complex [1,1′‐bis(pyridin‐2‐yl)‐2,2‐bi(1H‐imidazole)‐κN³][3,3′‐bis(pyridin‐2‐yl‐κN)‐1,1′‐methanediylbi(1H‐imidazol‐2‐yl‐κC²)](trimethylphosphane‐κP)iron(II) bis(hexafluoridophosphate), [Fe(C₁₇H₁₄N₆)(C₁₆H₁₂N₆)(C₃H₉P)](PF₆)₂, features coordination by an organic decomposition product of a tetradentate NHC ligand in an axial position. The decomposition product, a C—C‐coupled biimidazole, is trapped by coordination to still‐intact iron(II) complexes. Insights into the structural features of the organic decomposition products might help to improve the stability of oxidation catalysts under harsh conditions.     

Iron(III) Complexes of Tetradentate SCHIFF Bases

The iron(III) complexes of the Schiff bases derived from 1,3-diaminopropane-2-ol and salicylaldehyde (SBH₂), 3-aldehydosalicylic acid (SB′H₂) and acetylacetone (SB″H₂) have been isolated in the pure state and characterized. The structures of these complexes are discussed on the basis of elemental analyses, molecular weights, conductivities and magnetic susceptibilities. The Schiff bases behave as bivalent, tetradentate ligands. Room temperature (30°C) magnetic moments observed for these chelate compounds are lower than the spinonly value for high-spin d⁵ system.     

Structural characterization and catalytic activities of copper complexes with pyridine-amine-phosphine-oxide ligand

A new tetradentate containing pyridine, amine and phosphine oxide donor systems (1) was synthesized by the condensation of o-diphenylphosphinoaniline with 2-pyridinecarbaldehyde. Reaction of 1 with equal molar amount of CuCl₂ and Cu(ClO₄)₂ provided the formation of [CuCl₂(1)] (4) and [[Cu(1)(H₂O)](ClO₄)₂] (5), respectively. The ligand 1 behaves as a tridentate in 4, while as a tetradentate in 5. Both complexes were characterized by EPR, UV-Vis spectroscopy and X-ray diffraction. Both copper(II) complexes are in a square-pyramidal geometry. Single crystal structure of the copper complex reveals that the copper center is surrounded by three nitrogen donors and two chloride for 4; three nitrogen donors, water and oxygen donor from the moiety of phosphine oxide for 5. Complexation of 1 with CuCl in dichloromethane resulted in the formation of the corresponding copper(I) species, which catalyzed the oxidation of benzylic alcohols under aerobic conditions.     

Structure and oxygenase activity of the iron(ii) complex with pyridylcarboxamide ligand

A reaction of Fe(ClO₄)₂·6H₂O or Fe(OTf)₂(MeCN)₂ with one equivalent of the tetradentate ligand bis(2-pyridyl)methyl-2-pyridylcarboxamide (Py₂CHNHCOPy, tpcaH) furnished dimeric iron(II) complexes [Fe(tpcaH)]₂X₄ (X = ClO₄ ^? (1a), OTf^? (1b)). According to the X-ray diffraction data for the complex 1a, each iron atom is bound to the two pyridyl fragments of one ligand and the pyridylcarboxamide pair of the other one. Complex 1a is a dimer in the crystalline state, while in MeCN solution according to the mass spectrometric data with the electrospray ionization, ¹H NMR spectroscopic data, and quantum chemical calculations, it is apparently in the equilibrium with monomers of different structures. Complex 1 catalyzes selective oxidation of saturated hydrocarbons with hydrogen peroxide presumably involving the perferryl intermediate, which has an N,N,O-facial coordination of potentially tetradentate ligand tpcaH structurally modeling the 2-histidine-1-carboxylate-facial triad of the nonheme oxygenases.     

Efficient Water Oxidation Catalyzed by Mononuclear Ruthenium(II) Complexes Incorporating Schiff Base Ligands

Four new charge‐neutral ruthenium(II) complexes containing dianionic Schiff base and isoquinoline or 4‐picoline ligands were synthesized and characterized by NMR and ESI‐MS spectroscopies, elemental analysis, and X‐ray diffraction. The complexes exhibited excellent chemical water oxidation activity and high stability under acidic conditions (pH 1.0) using (NH₄)₂Ce(NO₃)₆ as a sacrificial electron acceptor. The high catalytic activities of these complexes for water oxidation were sustained for more than 10 h at low concentrations. High turnover numbers of up to 3200 were achieved. A water nucleophilic attack mechanism was proposed. A Ru^V?O intermediate was detected during the catalytic cycle by high‐resolution mass spectrometry.     

Role of electron transfer processes in the oxidation of aryl sulfides catalyzed by nonheme iron complexes

ABSTRACT

The oxidation of a series of aryl 1-methyl-1-phenylethyl sulfides with H₂O₂ catalyzed by the two tetradentate nonheme-iron complexes [(PDP)Fe^II(SbF₆)₂] and [(BPMCN)Fe^II(OTf)₂] occurs by an electron transfer-oxygen transfer (ET/OT) mechanism as supported by the observation of products deriving from fragmentation of the corresponding radical cations in association with S-oxidation products (sulfoxides).     

Photoredox Properties of Iron(III) Fluoro Complexes Containing Tetradentate Open-Chain N2O2Ligands

Tetradentate open-chain Schiff base N₂O₂-ligands of acacen, benacen or salen type and fluoride anions F^? coordinate to the iron(III) central atom in methanol forming the complexes [Fe(N₂O₂)(CH₃OH)F]. The complexes do not undergo spontaneous redox changes when kept in the dark. Their irradiation into intraligand or ligand-to-metal charge transfer bands causes the photoreduction of Fe(III) to Fe(II) associated with oxidation of metanol to its radical CH₂OH. The final products of the primary photoredox and secondary dark redox processes, Fe(II) and CH₂O, are formed in a 2:1 molar ratio. The efficiency of the axial methanol ligand photooxidation is strongly wavelength dependent and influenced by the peripheral groups R of the tetradentate ligands     

Iron(Ⅱ) hydrides bearing a tetradentate PSNP ligand

Iron(II) hydrides bearing PSNP tetradentate ligand were synthesized and well characterized. The hydrido iron complex [2H(NCMe)](BF₄) is an extremely efficient catalyst for the hydroboration of aldehydes at room temperature.     

Tetradentate Schiff-base ruthenium(III) complexes containing triphenylphosphine/arsine as coligands: study of physico-chemical,spectrometric, catalytic,and biocidal activities

A series of air-stable, low-spin Ru(III) octahedral complexes [RuX(EPh₃)L] (where X = Cl/Br; E = P/As; and L = dibasic tetradentate Schiff base derived by condensation of ethylenediamine with acetoacetanilide/acetoacetotoluidide/ethylacetoacetate in 1 : 2 molar ratio in ethanol) have been synthesized from RuX₃(EPh₃)₃ (where X = Cl/Br and E = P/As) with Schiff bases in 1 : 1 molar ratio in benzene for 6 h. These complexes were characterized by elemental analysis, spectral methods (Fourier transform infrared (FT-IR), UV-Vis, ¹H- and ¹³C-nuclear magnetic resonance (NMR) for the ligands, and electron paramagnetic resonance (EPR)), and are examined electrochemically. The complexes were efficient catalysts for oxidation of primary and secondary alcohols in their corresponding aldehydes and ketones in the presence of molecular oxygen. These complexes were also tested for their antibacterial and antifungal activities.     

Tripodal 1,2,3-triazole click ligand based on the triphenylphosphine oxide platform: atrane-type lanthanide complexes in solutions

Tris[2-(1-phenyl-1,2,3-triazol-4-ylmethoxy)phenyl]-phosphine oxide, a novel tripodal polytopic ligand produces, stable complexes with La(NO₃)₃ and Lu(NO₃)₃. According, to IR, multinuclear NMR and DFT data, the complexes, have atrane-type structure with tetradentate O,N,N,Ncoordination, of ligand in MeCN solutions.     

The Mechanism of Stereospecific C?H Oxidation by Fe(Pytacn) Complexes: Bioinspired Non‐Heme Iron Catalysts Containing cis‐Labile Exchangeable Sites

A detailed mechanistic study of the hydroxylation of alkane C? H bonds using H₂O₂ by a family of mononuclear non heme iron catalysts with the formula [Fe^II(CF₃SO₃)₂(L)] is described, in which L is a tetradentate ligand containing a triazacyclononane tripod and a pyridine ring bearing different substituents at the α and γ positions, which tune the electronic or steric properties of the corresponding iron complexes. Two inequivalent cis‐labile exchangeable sites, occupied by triflate ions, complete the octahedral iron coordination sphere. The C? H hydroxylation mediated by this family of complexes takes place with retention of configuration. Oxygen atoms from water are incorporated into hydroxylated products and the extent of this incorporation depends in a systematic manner on the nature of the catalyst, and the substrate. Mechanistic probes and isotopic analyses, in combination with detailed density functional theory (DFT) calculations, provide strong evidence that C? H hydroxylation is performed by highly electrophilic [Fe^V(O)(OH)L] species through a concerted asynchronous mechanism, involving homolytic breakage of the C? H bond, followed by rebound of the hydroxyl ligand. The [Fe^V(O)(OH)L] species can exist in two tautomeric forms, differing in the position of oxo and hydroxide ligands. Isotopic‐labeling analysis shows that the relative reactivities of the two tautomeric forms are sensitively affected by the α substituent of the pyridine, and this reactivity behavior is rationalized by computational methods.     

Synthesis and antibacterial activity of metal complexes of cefazolin

Cefazolin (Hcefaz) interacts with transition metal(II) ions to give [M(cefaz)Cl] complexes (M = Mn^II, Co^II, Ni^II, Cu^II, Zn^II, Pd^II) and [Ag₂(cefaz)₂Cl₂] which were characterized by physicochemical and spectroscopic methods. Their i.r. and the ¹H-n.m.r. spectra suggest that cefazolin behaves as a monoanionic tetradentate ligand. The complexes have been screened for antibacterial activity and the results are compared with the activity of cefazolin.     

Synthesis,spectral, electrochemical and catalytic studies of new Ru(III) tetradentate Schiff base complexes

The synthesis and characterization of several hexa‐coordinated ruthenium(III) Schiff base complexes of the type [RuX(EPh₃)(L)] (X = Cl or Br; E = P or As; L = dianion of the tetradentate Schiff base) are reported. IR, EPR, electronic spectra and cyclic voltammetric data of the complexes are discussed. An octahedral geometry has been tentatively proposed for all of these complexes. The new complexes have been subjected to catalytic activity in the reaction of oxidation of alcohols in the presence of N‐methylmorpholine‐N‐oxide. Copyright © 2007 John Wiley & Sons, Ltd.     

Structure and C-C cross-coupling reactivity of iron(III) complexes of halogenated amine-bis(phenolate) ligands

The preparation of tetradentate amine-bis(phenol) proligands with dichloro and difluoro substituted phenol groups and their reaction with FeX₃ (X = Cl or Br) is described. The compounds, 2-pyridylamino-N,N-bis(2-methylene-4,6-dichlorophenol), H₂[L₁]; 2-pyridylamino-N,N-bis(2-methylene-4,6-difluorophenol), H₂[L₂]; dimethylaminoethylamino-N,N-bis(2-methylene-4,6-dichlorophenol), H₂[L₃]; 2-tetrahydrofurfuryl-N,N-bis(2-methylene-4,6-dichlorophenol), H₂[L₄]; and methoxyethylamino-N,N-bis(2-methylene-4,6-dichlorophenol), H₂[L₅] were prepared in aqueous medium and obtained as white powders in good to excellent yield. Ten new iron(III) halide complexes supported by these tetradentate ligands are reported. Representative single crystal X-ray diffraction structures were obtained for H₂[L₁] and a water adduct of the iron(III) complex, aquachloro{2-pyridylamino-N,N-bis(2-methylene-4,6-dichlorophenolato)}iron(III), 2·H₂O. The structure of the proligand H₂[L₁] shows intramolecular hydrogen bonding. In the solid-state structure, the iron complex exhibits intermolecular hydrogen bonding between the water ligand and the phenolate oxygen of a neighbouring complex. The anhydrous complexes were studied for catalytic activity towards C-C cross-coupling of Grignard reagent nucleophiles with alkyl halide electrophiles.     

Ruthenium(III) tetradentate Schiff-base complexes: spectral,catalytic, and its biocidal efficacy

New six-coordinate ruthenium(III) Schiff-base complexes of general formula [Ru(X)(PPh₃)(L)] (where X = Cl/Br and L = mononucleating bibasic tetradentate ligand derived by condensing actetoacetanilide/acetoacetotoludide with o-aminophenol/o-aminothiophenol/o-aminobenzoic acid in 1 : 2 molar ratio in ethanol) have been synthesized and characterized by physico-chemical and spectroscopic methods. The new ruthenium(III) complexes possess 2NO/2NS metal binding sites and are catalysts for the oxidation of alcohols using molecular oxygen as co-oxidant and in C–C coupling reactions. These complexes possess good biocidal (antibacterial and antifungal) activity.     

Chromone-based Schiff base metal complexes as catalysts for catechol oxidation: Synthesis,kinetics and electrochemical studies

Two new Schiff base ligands with chromone moiety and their transition metal complexes were synthesized and characterized by elemental analyses, magnetic susceptibility, molar conductance and TGA analyses, FT IR, UV-Vis, NMR and mass spectroscopy. All the complexes synthesized have been investigated as functional models for catechol oxidase (catecholase) activity by employing 3,5-di-tert-butylcatechol as a model substrate. The two mononuclear copper(II) and two mononuclear iron(II) complexes show catecholase activity with turnover (k_cat) numbers lying in the range 27.2–1328.4 h^?1. According to the kinetic measurement results, the rate of catechol oxidation follows first order kinetics and iron(II) complexes were found to have higher catalytic activity than those of copper(II) complexes. Electron-donating substituent on Schiff base ligand enhanced the catalytic activity of metal complexes while the electron-withdrawing substituent led to a decrease in activity. The electrochemical properties of two Schiff bases and their metal complexes were also investigated by Cyclic Voltammetry (CV) using glassy carbon electrode (GCE) at various scan rates. Electrochemical processes of all the compounds were observed as irreversible.     

Catalytic oxyfunctionalization of saturated hydrocarbons by non-heme oxo-bridged diiron(III) complexes: role of acetic acid on oxidation reaction

Oxo-bridged diiron(III) complexes [Fe₂O(L¹)₂(H₂O)₂](ClO₄)₄ (1) and [Fe₂O(L²)₂(H₂O)₂](ClO₄)₄ (2), where L¹ and L² are tetradentate N-donor N,N′-bis(2-pyridylmethyl)-1,2-cyclohexanediamine and N,N′-bis(2-pyridylmethyl)ethane-1,2-diamine respectively, have been isolated as synthetic models of non-heme iron oxygenases and characterized by physicochemical and spectroscopic methods. Both the complexes have been studied as catalysts for the oxyfunctionalization of saturated hydrocarbons using green hydrogen peroxide (H₂O₂) as oxidant under mild conditions. The selectivity (A/K) and regioselectivity (3°/2°) in oxidative C–H functionalization of alkanes suggests the involvement of metal-based intermediate in the oxygenation reaction. The catalytic efficiency is found to be strongly dependent on the presence of acetic acid. Remarkable increase in conversion and selectivity favoring the formation of alcohols in the oxidation of cyclohexane and cyclooctane and exclusive hydroxylation of adamantane with drastic enhancement of regioselectivity has been achieved by the addition of acetic acid in the presence of H₂O₂.