Ionic‐Liquid‐Assisted Synthesis of Uniform Fluorinated B/C‐Codoped TiO2 Nanocrystals and Their Enhanced Visible‐Light Photocatalytic Activity

Exploiting advanced photocatalysts under visible light is of primary significance for the development of environmentally relevant photocatalytic decontamination processes. In this study, the ionic liquid (IL), 1‐butyl‐3‐methylimidazolium tetrafluoroborate, was employed for the first time as both a structure‐directing agent and a dopant for the synthesis of novel fluorinated B/C‐codoped anatase TiO₂ nanocrystals (T_IL) through hydrothermal hydrolysis of tetrabutyl titanate. These T_IL nanocrystals feature uniform crystallite and pore sizes and are stable with respect to phase transitions, crystal ripening, and pore collapse upon calcination treatment. More significantly, these nanocrystals possess abundant localized states and strong visible‐light absorption in a wide range of wavelengths. Because of synergic interactions between titania and codopants, the calcined T_IL samples exhibited high visible‐light photocatalytic activity in the presence of oxidizing Rhodamine B (RhB). In particular, 300 °C‐calcined T_IL was most photocatalytically active; its activity was much higher than that of TiO_1.98N_0.02 and reference samples (T_W) obtained under identical conditions in the absence of ionic liquid. Furthermore, the possible photocatalytic oxidation mechanism and the active species involved in the RhB degradation photocatalyzed by the T_IL samples were primarily investigated experimentally by using different scavengers. It was found that both holes and electrons, as well as their derived active species, such as ^.OH, contributed to the RhB degradation occurring on the fluorinated B/C‐codoped TiO₂ photocatalyst, in terms of both the photocatalytic reaction dynamics and the reaction pathway. The synthesis of the aforementioned novel photocatalyst and the identification of specific active species involved in the photodegradation of dyes could shed new light on the design and synthesis of semiconductor materials with enhanced photocatalytic activity towards organic pollutants.     

Constructing Ordered Three‐Dimensional TiO2 Channels for Enhanced Visible‐Light Photocatalytic Performance in CO2 Conversion Induced by Au Nanoparticles

As a typical photocatalyst for CO₂ reduction, practical applications of TiO₂ still suffer from low photocatalytic efficiency and limited visible‐light absorption. Herein, a novel Au‐nanoparticle (NP)‐decorated ordered mesoporous TiO₂ (OMT) composite (OMT‐Au) was successfully fabricated, in which Au NPs were uniformly dispersed on the OMT. Due to the surface plasmon resonance (SPR) effect derived from the excited Au NPs, the TiO₂ shows high photocatalytic performance for CO₂ reduction under visible light. The ordered mesoporous TiO₂ exhibits superior material and structure, with a high surface area that offers more catalytically active sites. More importantly, the three‐dimensional transport channels ensure the smooth flow of gas molecules, highly efficient CO₂ adsorption, and the fast and steady transmission of hot electrons excited from the Au NPs, which lead to a further improvement in the photocatalytic performance. These results highlight the possibility of improving the photocatalysis for CO₂ reduction under visible light by constructing OMT‐based Au‐SPR‐induced photocatalysts.     

A Facile One‐Pot Synthesis of Layered Protonated Titanate Nanosheets Loaded with Silver Nanoparticles with Enhanced Visible‐Light Photocatalytic Performance

Layered protonated titanate nanosheets (LPTNs) loaded with silver nanoparticles are prepared by a simple one‐pot hydrothermal route in silver‐ammonia solution. The as‐synthesized Ag‐loaded LPTNs possess large specific surface area. The Ag nanoparticles are highly dispersed on the surface of the LPTNs. They have negligible effects on the crystal structure, crystallinity, and surface area of the LPTNs but result in considerable enhancement of visible‐light absorption and in a red‐shift of the band gap for the LPTNs. The Ag‐loaded LPTNs show enhanced photocatalytic activity for both liquid‐ and gas‐phase reactions under visible‐light irradiation. Moreover, the photocatalytic activity first increases gradually with increasing Ag loading content, and then decreases after maximizing at an optimal Ag content. At the Ag loading content of 2.87 mol % and 1.57 mol %, the Ag‐loaded LPTNs exhibit the highest visible‐light photocatalytic activity for degradation of rhodamine B in water and mineralization of benzene in air, respectively. An alternative possible mechanism for the enhancement of the visible‐light photocatalytic activity is also proposed.     

A Comparison Study of Rhodamine B Photodegradation over Nitrogen‐Doped Lamellar Niobic Acid and Titanic Acid under Visible‐Light Irradiation

Slip between the sheets! The intercalation properties of lamellar solid acids have a profound impact on nitrogen doping as well as on the resultant visible‐light photocatalysis, and the effects depend strongly on the protonic acidities of the samples (see figure).

     

Pivotal Role of Fluorine in Tuning Band Structure and Visible‐Light Photocatalytic Activity of Nitrogen‐Doped TiO2

Synergistic interactions between N and F can be used to tune the band structures of N‐doped TiO₂ (see scheme). Reduction potential of conduction band electron is positively shifted to weaken unwanted O₂ reduction, but enhances the target reduction reaction in air. The tuning also enhances the oxidation ability of the valence band to oxidize water to O₂, which makes photocatalytic reduction proceed without any organic sacrificial reagents.

     

Tuning the Surface Structure of Nitrogen‐Doped TiO2 Nanofibres—An Effective Method to Enhance Photocatalytic Activities of Visible‐Light‐Driven Green Synthesis and Degradation

Nitrogen‐doped TiO₂ nanofibres of anatase and TiO₂(B) phases were synthesised by a reaction between titanate nanofibres of a layered structure and gaseous NH₃ at 400–700 °C, following a different mechanism than that for the direct nitrogen doping from TiO₂. The surface of the N‐doped TiO₂ nanofibres can be tuned by facial calcination in air to remove the surface‐bonded N species, whereas the core remains N doped. N‐Doped TiO₂ nanofibres, only after calcination in air, became effective photocatalysts for the decomposition of sulforhodamine B under visible‐light irradiation. The surface‐oxidised surface layer was proven to be very effective for organic molecule adsorption, and the activation of oxygen molecules, whereas the remaining N‐doped interior of the fibres strongly absorbed visible light, resulting in the generation of electrons and holes. The N‐doped nanofibres were also used as supports of gold nanoparticle (Au NP) photocatalysts for visible‐light‐driven hydroamination of phenylacetylene with aniline. Phenylacetylene was activated on the N‐doped surface of the nanofibres and aniline on the Au NPs. The Au NPs adsorbed on N‐doped TiO₂(B) nanofibres exhibited much better conversion (80 % of phenylacetylene) than when adsorbed on undoped fibres (46 %) at 40 °C and 95 % of the product is the desired imine. The surface N species can prevent the adsorption of O₂ that is unfavourable for the hydroamination reaction, and thus, improve the photocatalytic activity. Removal of the surface N species resulted in a sharp decrease of the photocatalytic activity. These photocatalysts are feasible for practical applications, because they can be easily dispersed into solution and separated from a liquid by filtration, sedimentation or centrifugation due to their fibril morphology.     

On the Origin of the Visible‐Light Activity of Titanium Dioxide Doped with Carbonate Species

Plane‐wave‐based pseudopotential density functional theory (DFT) calculations are used to elucidate the origin of the high photocatalytic efficiency of carbonate‐doped TiO₂. Two geometrically possible doping positions are considered, including interstitial and substitutional carbon atoms on Ti sites. From the optical absorption properties calculations, we believe that the formation of carbonates after doping with interstitial carbon atoms is crucial, whereas the contribution from the cationic doping on Ti sites is negligible. The carbonate species doped TiO₂ exhibits excellent absorption in the visible‐light region of 400–800 nm, in good agreement with experimental observations. Electronic structure analysis shows that the carbonate species introduce an impurity state from Ti 3d below the conduction band. Excitations from the impurity state to the conduction band may be responsible for the high visible‐light activity of the carbon doped TiO₂ materials.     

Mesoporous Au/TiO2 Nanocomposite Microspheres for Visible‐Light Photocatalysis

Mesoporous Au/TiO₂ nanocomposite microspheres have been synthesized by using a microemulsion‐based bottom‐up self‐assembly (EBS) process starting from monodisperse gold and titania nanocrystals as building blocks. The microspheres had large surface areas (above 270 m² g^?1) and open mesopores (about 5 nm), which led to the adsorption‐driven concentration of organic molecules in the vicinity of the microspheres. Au nanoparticles, which were stably confined within the microspheres, enhanced the absorption over the broad UV/Vis/NIR spectroscopic range, owing to their strong surface plasmon resonance (SPR); as a result, the Au nanoparticles promoted the visible‐light photo‐induced degradation of organic compounds.     

Highly Efficient Low‐Temperature Plasma‐Assisted Modification of TiO2 Nanosheets with Exposed {001} Facets for Enhanced Visible‐Light Photocatalytic Activity

Anatase TiO₂ nanosheets with exposed {001} facets have been controllably modified under non‐thermal dielectric barrier discharge (DBD) plasma with various working gas, including Ar, H₂, and NH₃. The obtained TiO₂ nanosheets possess a unique crystalline core/amorphous shell structure (TiO₂@TiO_2?x), which exhibit the improved visible and near‐infrared light absorption. The types of dopants (oxygen vacancy/surface Ti³⁺/substituted N) in oxygen‐deficient TiO₂ can be tuned by controlling the working gases during plasma discharge. Both surface Ti³⁺ and substituted N were doped into the lattice of TiO₂ through NH₃ plasma discharge, whereas the oxygen vacancy or Ti³⁺ (along with the oxygen vacancy) was obtained after Ar or H₂ plasma treatment. The TiO₂@TiO_2?x from NH₃ plasma with a green color shows the highest photocatalytic activity under visible‐light irradiation compared with the products from Ar plasma or H₂ plasma due to the synergistic effect of reduction and simultaneous nitridation in the NH₃ plasma.     

Carbon‐Dot‐Sensitized,Nitrogen‐Doped TiO2 in Mesoporous Silica for Water Decontamination through Nonhydrophobic Enrichment–Degradation Mode

Mesoporous silica synthesized from the cocondensation of tetraethoxysilane and silylated carbon dots containing an amide group has been adopted as the carrier for the in situ growth of TiO₂ through an impregnation–hydrothermal crystallization process. Benefitting from initial complexation between the titania precursor and carbon dot, highly dispersed anatase TiO₂ nanoparticles can be formed inside the mesoporous channel. The hybrid material possesses an ordered hexagonal mesostructure with p6mm symmetry, a high specific surface area (446.27 m² g^?1), large pore volume (0.57 cm³ g^?1), uniform pore size (5.11 nm), and a wide absorption band between λ=300 and 550 nm. TiO₂ nanocrystals are anchored to the carbon dot through Ti?O?N and Ti?O?C bonds, as revealed by X‐ray photoelectron spectroscopy. Moreover, the nitrogen doping of TiO₂ is also verified by the formation of the Ti?N bond. This composite shows excellent adsorption capabilities for 2,4‐dichlorophenol and acid orange 7, with an electron‐deficient aromatic ring, through electron donor–acceptor interactions between the carbon dot and organic compounds instead of the hydrophobic effect, as analyzed by the contact angle analysis. The composite can be photocatalytically recycled through visible‐light irradiation after adsorption. The narrowed band gap, as a result of nitrogen doping, and the photosensitization effect of carbon dots are revealed to be coresponsible for the visible‐light activity of TiO₂. The adsorption capacity does not suffer any clear losses after being recycled three times.     

Visible‐Light Photochemical Activity of Nanoporous Carbons under Monochromatic Light

By using monochromatic light the ability of semiconductor‐free nanoporous carbons to convert the low‐energy photons from the visible spectrum into chemical reactions (i.e. phenol photooxidation) is demonstrated. Data shows that the onset wavelength of the photochemical activity can be tuned by surface functionalization, with enhanced visible‐light conversion upon introducing N‐containing groups.     

Energy Migration Upconversion in Manganese(II)‐Doped Nanoparticles

We report the synthesis and characterization of cubic NaGdF₄:Yb/Tm@NaGdF₄:Mn core–shell structures. By taking advantage of energy transfer through Yb→Tm→Gd→Mn in these core–shell nanoparticles, we have realized upconversion emission of Mn²⁺ at room temperature in lanthanide tetrafluoride based host lattices. The upconverted Mn²⁺emission, enabled by trapping the excitation energy through a Gd³⁺ lattice, was validated by the observation of a decreased lifetime from 941 to 532 μs in the emission of Gd³⁺ at 310 nm (⁶P_7/2→⁸S_7/2). This multiphoton upconversion process can be further enhanced under pulsed laser excitation at high power densities. Both experimental and theoretical studies provide evidence for Mn²⁺ doping in the lanthanide‐based host lattice arising from the formation of F^? vacancies around Mn²⁺ ions to maintain charge neutrality in the shell layer.     

Visible‐Light‐Induced Formal [3+2] Cycloaddition for Pyrrole Synthesis under Metal‐Free Conditions

A photocatalytic formal [3+2] cycloaddition of 2H‐azirines with alkynes has been achieved under irradiation by visible light in the presence of organic dye photocatalysts. This transformation provides efficient access to highly functionalized pyrroles in good yields and has been applied to the synthesis of drug analogues. A primary trial of photocascade catalysis merging energy transfer and redox neutral reactions was shown to be successful.     

Fabrication of Nitrogen‐Doped Mesoporous‐Carbon‐Coated Palladium Nanoparticles: An Intriguing Electrocatalyst for Methanol and Formic Acid Oxidation

Inspired by the attractive catalytic properties of palladium and the inert nature of carbon supports in catalysis, a concise and simple methodology for in situ nitrogen‐doped mesoporous‐carbon‐supported palladium nanoparticles (Pd/N‐C) has been developed by carbonizing a palladium dimethylglyoximate complex. The as‐synthesized Pd/N‐C has been exfoliated as a fuel cell catalyst by studying the electro‐oxidation of methanol and formic acid. The material synthesized at 400 °C,namely, Pd/N‐C‐400,exhibitssuperior mass activity and stability among catalysts synthesized under different carbonization temperaturesbetween300 and 500 °C. The unique 1D porous structure in Pd/N‐C‐400 helps better electron transport at the electrode surface, which eventually leads to about five times better catalytic activity and about two times higher stability than that of commercial Pd/C. Thus, our designed sacrificial metal–organic templatedirected pathway becomes a promising technique for Pd/N‐C synthesis with superior catalytic performances.     

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

Hybrid Density Functional Study on Mono‐ and Codoped NaNbO3 for Visible‐Light Photocatalysis

Monodoping with Mo, Cr, and N atoms, and codoping with Mo?N and Cr?N atom pairs, are utilized to adjust the band structure of NaNbO₃, so that NaNbO₃ can effectively make use of visible light for the photocatalytic decomposition of water into hydrogen and oxygen, as determined by using the hybrid density functional. Codoping is energetically favorable compared with the corresponding monodoping, due to strong Coulombic interactions between the dopants and other atoms, and the effective band gap and stability for codoped systems increase with decreasing dopant concentration and the distance between dopants. The molybdenum, chromium, and nitrogen monodoped systems, as well as chromium–nitrogen codoped systems, are unsuitable for the photocatalytic decomposition of water by using visible light, because defects introduced by monodoping or the presence of unoccupied states above the Fermi level, which promotes electron–hole recombination processes, suppress their photocatalytic performance. The Mo?N codoped NaNbO₃ sample is a promising photocatalyst for the decomposition of water by using visible light because Mo?N codoping can reduce the band gap to a suitable value with respect to the water redox level without introducing unoccupied states.     

Zeolite‐Supported Gold Nanoparticles for Selective Photooxidation of Aromatic Alcohols under Visible‐Light Irradiation

With new photocatalysts of gold nanoparticles supported on zeolite supports (Au/zeolite), oxidation of benzyl alcohol and its derivatives into the corresponding aldehydes can proceed well with a high selectivity (99 %) under visible‐light irradiation at ambient temperature. Au/zeolite photocatalysts were characterised by UV/Vis, X‐ray photoelectron spectroscopy (XPS), TEM, XRD, energy‐dispersive spectroscopy (EDS), Brauner–Emmet–Teller (BET) analyses, IR and Raman techniques. The surface plasmon resonance (SPR) effect of gold nanoparticles, the adsorption capability of zeolite supports and the molecular polarities of aromatic alcohols were demonstrated to have an essential correlation with the photocatalytic performances. In addition, the effects of light intensity, wavelength range and the role of molecular oxygen were investigated in detail. The kinetic study indicated that the visible‐light irradiation required much less apparent activation energy for photooxidation compared with thermal reaction. Based on the characterisation data and the photocatalytic performances, we proposed a possible photooxidation mechanism.