Donor–Acceptor Oligoimides for Application in High‐Performance Electrical Memory Devices

Two new oligoimides, OI(APAP-6FDA) and OI(APAN-6FDA) , which consisted of electron‐donating N‐(4‐aminophenyl)‐N‐phenyl‐1‐aminopyrene ( APAP ) or N‐(4‐aminophenyl)‐N‐phenyl‐1‐aminonaphthalene ( APAN ) moieties and electron‐accepting 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride ( 6FDA ) moieties, were designed and synthesized for application in electrical memory devices. Such devices, with the indium tin oxide (ITO)/oligoimide/Al configuration, showed memory characteristics, from high‐conductance Ohmic current flow to negative differential resistance (NDR), with corresponding film thicknesses of 38 and 48 nm, respectively. The 48 nm oligoimide film device exhibited NDR electrical behavior, which resulted from the diffusion of Al atoms into the oligoimide layer. On further increasing the film thickness to 85 nm, the OI(APAP-6FDA) film device showed a reproducible nonvolatile “write once read many” (WORM) property with a high ON/OFF current ratio (more than ×10⁴). On the other hand, the device that was based on the 85 nm OI(APAN-6FDA) film exhibited a volatile static random access memory (SRAM) property. The longer conjugation length of the pyrene unit compared to that of a naphthalene unit was considered to be responsible for the different memory characteristics between these two oligoimides. These experimental results suggested that tunable switching behavior could be achieved through an appropriate design of the donor–acceptor oligoimide structure and controllable thickness of the active memory layer.     

Effect of Extended π‐Conjugation Structure of Donor–Acceptor Conjugated Copolymers on the Photoelectronic Properties

New donor–acceptor conjugated copolymers based on alkylthienylbenzodithiophene (BDTT) and alkoxynaphthodithiophene (NDT) have been synthesized and compared with their benzo[1,2‐b:4,5‐b′]dithiophene (BDT)‐based analogues to investigate the effect of the extended π conjugation of the polymer main chain on the physicochemical properties of the polymers. A systematic investigation into the optical properties, energy levels, field‐effect transistor characteristics, and photovoltaic characteristics of these polymers was conducted. Both polymers demonstrated enhanced photovoltaic performance and increased hole mobility compared with the BDT‐based analogue. However, the BDTT‐based polymer (with π‐conjugation extension perpendicular to main chain) gave the highest power conversion efficiency of 5.07 % for the single‐junction polymer solar cell, whereas the NDT‐based polymer (with π‐conjugation extension along the main chain) achieved the highest hole mobility of approximately 0.1 cm² V^?1 s^?1 based on the field‐effect transistor; this indicated that extending the π conjugation in different orientations would have a significant influence on the properties of the resulting polymers.     

New Conjugated Molecules with Two and Three Dithienyldiketopyrrolopyrrole (DPP) Moieties Substituted at meta Positions of Benzene toward p‐ and n‐Type Organic Photovoltaic Materials

Two conjugated molecules, TADPP3 and TADPP2‐TT , are reported, in which three and two dithienyldiketopyrrolopyrrole (DPP) moieties, respectively, are substituted at the meta positions of benzene. Based on cyclic voltammetry and absorption data, TADPP3 and TADPP2‐TT possess similar HOMO and LUMO energies of about ?5.2 and ?3.4 eV, respectively. Thin films of TADPP3 and TADPP2‐TT exhibit p‐type semiconducting behavior with hole mobilities of 2.36×10^?3 and 3.76×10^?4 cm² V^?1 s^?1 after thermal annealing. Molecules TADPP3 and TADPP2‐TT were utilized as p‐type photovoltaic materials to fabricate organic solar cells after blending with phenyl C₇₁ butyric acid methyl ester ( PC₇₁BM ) and phenyl C₆₁ butyric acid methyl ester ( PC₆₁BM ). The relatively low J_SC and fill factor values can be attributed to poor film morphologies based on AFM and XRD studies. A solar cell with a thin film of TADPP3 with PC₇₁BM in a weight ratio of 1:2 exhibits a high open‐circuit voltage (V_OC) of 0.99 V and a power conversion efficiency (PCE) of 2.47 %. Interestingly, TADPP3 can also be employed as an n‐type photovoltaic material. The blended thin film of TADPP3 with P3HT in a weight ratio of 1:2 gave a high V_OC of 1.11 V and a PCE of 1.08 % after thermal annealing.     

Low Band Gap Donor–Acceptor Conjugated Systems Based on 3‐Alkoxy or 3‐Pyrrolidino‐4‐cyanothiophene and Benzothiadiazole Units

3‐Hexyloxy‐4‐cyanothiophene, 3‐pyrrolidil‐4‐cyanothiophene, and 3,4‐ethylenedioxythiophene (EDOT) units are used with benzothiadiazole as building blocks for the development of three new conjugated donor–acceptor–donor (DAD) derivatives. The DAD molecules have the central acceptor part, which is formed by combining electron‐withdrawing cyano groups and the benzothiadiazole moiety, in common. Theoretical calculations and UV/Vis and electrochemical data reveal the key role of the end‐capped donor to tune the electronic properties of the derivatives. A study of the electropolymerization process of the three derivatives shows the strong influence of the donor parts on both the reactivity of the precursors and the electronic properties of the resulting polymers. Derivatives end‐capped with pyrrolidinocyano thiophene or EDOT units lead to films of polymers presenting low band gaps of around 0.9–1.4 eV. Upon oxidation, the two polymers present different behavior. In the presence of the pyrrolidinocyano thiophene moieties, oxidation leads to a blueshift of the absorption bands, whereas with EDOT units a classical redshift, giving high absorption in the near‐IR region, is observed for the oxidized states.     

Engineering the Interconnecting Position of Star‐Shaped Donor–π–Acceptor Molecules Based on Triazine,Spirofluorene, and Triphenylamine Moieties for Color Tuning from Deep Blue to Green

Pi‐conjugated organic molecules featuring the donor–bridge–acceptor (D–π–A) structure have been widely used in semiconducting materials owing to their rigid structure, good thermal stability, excellent charge transfer, and high emission efficiency. To investigate the effect of the D–π–A molecular structure on the photophysical properties, in this contribution, three star‐shaped D–π–A isomers based on the 2,4,6‐triphenyl‐1,3,5‐triazine, spirofluorene, and triphenylamine moieties, that is, p‐TFTPA, mp‐TFTPA, and m‐TFTPA, were synthesized by elaborately engineering the interconnecting position in the building‐block units. The optophysical properties of these compounds were systematically explored by experiments and theory calculations. Definitively, changing the interconnecting position in these molecules played a significant role in the degree of π conjugation, which resulted in tunable emission colors from deep blue to green. Moreover, these isomers were employed as emissive dopants in organic light‐emitting diodes. The highest external quantum efficiency of 2.3 % and current efficiency of 6.2 cd A^?1 were achieved by using the p‐TFTPA based device. This research demonstrates a feasible way to realize blue emitters by engineering D–π–A conjugation.     

(3+3)‐Annulation of Donor–Acceptor Cyclopropanes with Diaziridines

The first example of (3+3)‐annulation of two different three‐membered rings is reported herein. Donor‐acceptor cyclopropanes in reaction with diaziridines were found to afford perhydropyridazine derivatives in high yields and diastereoselectivity under mild Lewis acid catalysis. The disclosed reaction is applicable for the broad substrate scope and exhibits an excellent functional group tolerance.     

Modulating Photo‐ and Electroluminescence in a Stimuli‐Responsive π‐Conjugated Donor–Acceptor Molecular System

Functional organic materials that display reversible changes in fluorescence in response to external stimuli are of immense interest owing to their potential applications in sensors, probes, and security links. While earlier studies mainly focused on changes in photoluminescence (PL) color in response to external stimuli, stimuli‐responsive electroluminescence (EL) has not yet been explored for color‐tunable emitters in organic light‐emitting diodes (OLEDs). Here a stimuli‐responsive fluorophoric molecular system is reported that is capable of switching its emission color between green and orange in the solid state upon grinding, heating, and exposure to chemical vapor. A mechanistic study combining X‐ray diffraction analysis and quantum chemical calculations reveals that the tunable green/orange emissions originate from the fluorophore's alternating excited‐state conformers formed in the crystalline and amorphous phases. By taking advantage of this stimuli‐responsive fluorescence behavior, two‐color emissive OLEDs were produced using the same fluorophore in different solid phases.     

Charge Separation in Graphene‐Decorated Multimodular Tris(pyrene)–Subphthalocyanine–Fullerene Donor–Acceptor Hybrids

A new approach to probe the effect of graphene on photochemical charge separation in donor–acceptor conjugates is devised. For this, multimodular donor–acceptor conjugates, composed of three molecules of pyrene, a subphthalocyanine, and a fullerene C₆₀ ((Pyr)₃SubPc‐C₆₀), have been synthesized and characterized. These systems were hybridized on few‐layer graphene through π–π stacking interactions of the three pyrene moieties. The hybrids were characterized using Raman, HRTEM, and spectroscopic and electrochemical techniques. The energy levels of the donor–acceptor conjugates were fine‐tuned upon interaction with graphene and photoinduced charge separation in the absence and presence of graphene was studied by femtosecond transient absorption spectroscopy. Accelerated charge separation and recombination was detected in these graphene‐decorated conjugates suggesting that they could be used as materials for fast‐responding optoelectronic devices and in light energy harvesting applications.     

A Solution‐Processable Donor–Acceptor Compound Containing Boron(III) Centers for Small‐Molecule‐Based High‐Performance Ternary Electronic Memory Devices

A novel small‐molecule boron(III)‐containing donor–acceptor compound has been synthesized and employed in the fabrication of solution‐processable electronic resistive memory devices. High ternary memory performances with low turn‐on (V_Th1=2.0 V) and distinct threshold voltages (V_Th2=3.3 V), small reading bias (1.0 V), and long retention time (>10⁴ seconds) with a large ON/OFF ratio of each state (current ratio of “OFF”, “ON1”, and “ON2”=1:10³:10⁶) have been demonstrated, suggestive of its potential application in high‐density data storage. The present design strategy provides new insight in the future design of memory devices with multi‐level transition states.     

Imidazole as a Donor/Acceptor Unit in Charge‐Transfer Chromophores with Extended π‐Linkers

Eleven new, stable, push–pull systems that feature 4,5‐bis[4‐(N,N‐dimethylamino)phenyl]imidazole and 4,5‐dicyanoimidazole as the donor and acceptor moieties and the systematically extended and varied π‐linker were prepared and investigated. Evaluation of the measured UV/Vis spectra, electrochemical data (cyclic voltammetry (CV), rotating‐disc voltammetry (RDV), and polarography) and calculated β and γ polarizabilities showed efficient charge transfer (CT) in biimidazole‐type chromophores. Push–pull system 27 , which features a planar thiophene‐derived π‐linker, was revealed to be the most efficient chromophore within the studied series. This chromophore possessed the most bathochromically shifted CT band, the lowest electrochemical gap, and highest β and γ polarizabilities. The CT transition was most significantly affected by structural features such as π‐linker length, planarity, conjugating arrangement, and the presence of olefinic/acetylenic or 1,4‐phenylene/thiophene subunits in the π‐linker.     

Highly Segregated Lamello‐Columnar Mesophase Organizations and Fast Charge Carrier Mobility in New Discotic Donor–Acceptor Triads

Four new donor–acceptor triads (D–A–D) based on discotic and arylene mesogens have been synthesized by using Sonogashira coupling and cyclization reactions. This family of triads consists of two side‐on pending triphenylene mesogens, acting as the electron‐donating groups (D), laterally connected through short lipophilic spacers to a central perylenediimide (PI), benzo[ghi]perylenediimide (BI), or coronenediimide (CI) molecular unit, respectively, playing the role of the electron acceptor (A). All D–A–D triads self‐organize to form a lamello‐columnar oblique mesophase, with a highly segregated donor–acceptor (D–A) heterojunction organization, consequent to efficient molecular self‐sorting. The structure consists in the regular alternation of two disrupted rows of triphenylene columns and a continuous row of diimine species. High‐resolution STM images demonstrate that PI‐TP2 forms stable 2D self‐assembly nanostructures with some various degrees of regularity, whereas the other triads do not self‐organize into ordered architectures. The electron‐transport mobility of CI‐TP2, measured by time‐of‐flight at 200 °C in the mesophase, is one order of magnitude higher than the hole mobility. By means of this specific molecular designing idea, we realized and demonstrated for the first time the so‐called p–n heterojunction at the molecular level in which the electron‐rich triphenylene columns act as the hole transient pathways, and the coronenediimide stacks form the electron‐transport channels.     

Organic Donor–Acceptor Assemblies form Coaxial p–n Heterojunctions with High Photoconductivity

The formation of coaxial p–n heterojunctions by mesoscale alignment of self‐sorted donor and acceptor molecules, important to achieve high photocurrent generation in organic semiconductor‐based assemblies, remains a challenging topic. Herein, we show that mixing a p‐type π gelator (TTV) with an n‐type semiconductor (PBI) results in the formation of self‐sorted fibers which are coaxially aligned to form interfacial p–n heterojunctions. UV/Vis absorption spectroscopy, powder X‐ray diffraction studies, atomic force microscopy, and Kelvin‐probe force microscopy revealed an initial self‐sorting at the molecular level and a subsequent mesoscale self‐assembly of the resulted supramolecular fibers leading to coaxially aligned p–n heterojunctions. A flash photolysis time‐resolved microwave conductivity (FP‐TRMC) study revealed a 12‐fold enhancement in the anisotropic photoconductivity of TTV/PBI coaxial fibers when compared to the individual assemblies of the donor/acceptor molecules.     

GaCl3‐Mediated Reactions of Donor–Acceptor Cyclopropanes with Aromatic Aldehydes

A new strategy for cascade assembly of substituted indenes and polycyclic lactones based on reactions of donor–acceptor cyclopropanes and styrylmalonates with aromatic aldehydes in the presence of GaCl₃ has been developed. The use of GaCl₃ makes it possible to principally change the direction of the reaction known in this series of substrates and to perform the process in a multicomponent version. Generation of formal 1,2‐zwitterionic intermediates owing to complexation of dicarboxylate groups with GaCl₃ is the driving force of the reactions discovered. This method makes it possible to assemble indenylmalonates or indano[1′,2′:2,3]indano[2,1‐b]furan‐2‐ones in one synthetic stage from readily available starting compounds with high regio‐ and diastereoselectivity. A mechanism of the reactions has been suggested using the ¹⁸O label in benzaldehyde.     

Photoinduced Electron Transfer within a Zinc Porphyrin–Cyclobis(paraquat‐p‐phenylene) Donor–Acceptor Dyad

Understanding the mechanism of efficient photoinduced electron‐transfer processes is essential for developing molecular systems for artificial photosynthesis. Towards this goal, we describe the synthesis of a donor–acceptor dyad comprising a zinc porphyrin donor and a tetracationic cyclobis(paraquat‐p‐phenylene) (CBPQT⁴⁺) acceptor. The X‐ray crystal structure of the dyad reveals the formation of a dimeric motif through the intermolecular coordination between the triazole nitrogen and the central Zn metal of two adjacent units of the dyad. Photoinduced electron transfer within the dyad in MeCN was investigated by femtosecond and nanosecond transient absorption spectroscopy, as well as by transient EPR spectroscopy. Photoexcitation of the dyad produced a weakly coupled ZnP^+.–CBPQT^3+. spin‐correlated radical‐ion pair having a τ=146 ns lifetime and a spin–spin exchange interaction of only 0.23 mT. The long radical‐ion‐pair lifetime results from weak donor–acceptor electronic coupling as a consequence of having nine bonds between the donor and the acceptor, and the reduction in reorganization energy for electron transfer caused by charge dispersal over both paraquat units within CBPQT^3+..     

Alternating and Diblock Donor–Acceptor Conjugated Polymers Based on Diindeno[1,2‐b:2′,1′‐d]thiophene Structure: Synthesis,Characterization, and Photovoltaic Applications

Pentacyclic diindeno[1,2‐b:2′,1′‐d]thiophene ( DIDT ) unit is a rigid and coplanar conjugated molecule. To the best of our knowledge, this attractive molecule has never been incorporated into a polymer and thus its application in polymer solar cells has never been explored. For the first time, we report the detailed synthesis of the tetra‐alkylated DIDT molecule leading to its dibromo‐ and diboronic ester derivatives, which are the key monomers for preparation of DIDT ‐based polymers. Two donor–acceptor alternating polymers, poly(diindenothiophene‐alt‐benzothiadiazole) PDIDTBT and poly(diindenothiophene‐alt‐dithienylbenzothiadiazole) PDIDTDTBT , were synthesized by using Suzuki polymerization. Copolymer PTDIDTTBT was also prepared by using Stille polymerization. Although PTDIDTTBT is prepared through a manner of random polymerization, we found that the different reactivities of the dibromo‐monomers lead to the resulting polymer having a block copolymer arrangement. With the higher structural regularity, PTDIDTTBT , symbolized as (thiophene‐alt‐ DIDT )_0.5‐block‐(thiophene‐alt‐BT)_0.5, shows the higher degree of crystallization, stronger π–π stacking, and broader absorption spectrum in the solid state, as compared to its alternating PDIDTDTBT analogue. Bulk heterojunction photovoltaic cells based on ITO/PEDOT:PSS/polymer:PC₇₁BM/Ca/Al configuration were fabricated and characterized. PDIDTDTBT /PC₇₁BM and PTDIDTTBT /PC₇₁BM systems exhibited promising power‐conversion efficiencies (PCEs) of 1.65 % and 2.00 %, respectively. Owing to the complementary absorption spectra, as well as the compatible structures of PDIDTDTBT and PTDIDTTBT , the PCE of the device based on the ternary blend PDIDTDTBT / PTDIDTTBT /PC₇₁BM was further improved to 2.40 %.     

Molecular Design of Thermally Activated Delayed‐Fluorescent Emitters Using 2,2′‐Bipyrimidine as the Acceptor in Donor–Acceptor Structures

Donor–acceptor–donor (D–A–D)‐type thermally activated delayed fluorescence (TADF) emitters 5,5′‐bis{4‐[9,9‐dimethylacridin‐10(9H )‐yl]phenyl}‐2,2′‐bipyrimidine (Ac‐bpm) and 5,5′‐bis[4‐(10H ‐phenoxazin‐10‐yl)phenyl]‐2,2′‐bipyrimidine (Px‐bpm), based on the 2,2′‐bipyrimidine accepting unit, were developed and their TADF devices were fabricated. The orthogonal geometry between the donor unit and the 2,2′‐bipyrimidine accepting core facilitated a HOMO/LUMO spatial separation, thus realizing thermally activated delayed fluorescence. The exhibited electroluminescence ranged from green to yellow, depending on the donor unit, with maximum external quantum efficiencies of up to 17.1 %.