Phosphorene Co‐catalyst Advancing Highly Efficient Visible‐Light Photocatalytic Hydrogen Production

Transitional metals are widely used as co‐catalysts boosting photocatalytic H₂ production. However, metal‐based co‐catalysts suffer from high cost, limited abundance and detrimental environment impact. To date, metal‐free co‐catalyst is rarely reported. Here we for the first time utilized density functional calculations to guide the application of phosphorene as a high‐efficiency metal‐free co‐catalyst for CdS, Zn_0.8Cd_0.2S or ZnS. Particularly, phosphorene modified CdS shows a high apparent quantum yield of 34.7 % at 420 nm. This outstanding activity arises from the strong electronic coupling between phosphorene and CdS, as well as the favorable band structure, high charge mobility and massive active sites of phosphorene, supported by computations and advanced characterizations, for example, synchrotron‐based X‐ray absorption near edge spectroscopy. This work brings new opportunities to prepare highly‐active, cheap and green photocatalysts.     

Chemical Regulation of Carbon Quantum Dots from Synthesis to Photocatalytic Activity

Carbon quantum dots (CQDs) were synthesized by heating various carbon sources in HNO₃ solution at reflux, and the effects of HNO₃ concentration on the size of the CQDs were investigated. Furthermore, the oxygen‐containing surface groups of as‐prepared CQDs were selectively reduced by NaBH₄, leading to new surface states. The experimental results show that the sizes of CQDs can be tuned by HNO₃ concentration and then influence their photoluminescent behaviors; the photoluminescent properties are related to both the size and surface state of the CQDs, but the photocatalytic activities are determined by surface states alone. The different oxygen‐containing groups on the surface of the CQDs can induce different degrees of the band bending upward, which determine the separation and combination of the electron–hole pairs. The high upward band bending, which is induced by C?O and COOH groups, facilitates separation of the electron–hole pairs and then enhances high photocatalytic activity. In contrast, the low upward band bending induced by C? OH groups hardly prevents the electron–hole pairs from surface recombination and then exhibits strong photoluminescence. Therefore, both the photocatalytic activities and optical properties of CQDs can be tuned by their surface states.     

Carbon Quantum Dots Bridged TiO2/CdIn2S4 toward Photocatalytic Upgrading of Polycyclic Aromatic Hydrocarbons to Benzaldehyde

Conversion of hazardous compounds to value-added chemicals using clean energy possesses massive industrial interest. This applies especially to the hazardous compounds that are frequently released in daily life. In this work, a S-scheme photocatalyst is optimized by rational loading of carbon quantum dots (CQDs) during the synthetic process. As a bridge, the presence of CQDs between TiO₂ and CdIn₂S₄ improves the electron extraction from TiO₂ and supports the charge transport in S-scheme. Thanks to this, the TiO₂/CQDs/CdIn₂S₄ presents outstanding photoactivity in converting the polycyclic aromatic hydrocarbons (PAHs) released by cigarette to value-added benzaldehyde. The optimized photocatalyst performs 87.79% conversion rate and 72.76% selectivity in 1 h reaction under a simulated solar source, as confirmed by FT-IR and GC-MS. A combination of experiments and theoretical calculations are conducted to demonstrate the role of CQDs in TiO₂/CQDs/CdIn₂S₄ toward photocatalysis.     

Sulfated Carbon Quantum Dots as Efficient Visible‐Light Switchable Acid Catalysts for Room‐Temperature Ring‐Opening Reactions

Acid catalytic processes play a classic and important role in modern organic synthesis. How well the acid can be controlled often plays the key role in the controllable synthesis of the products with high conversion yield and selectivity. The preparation of a novel, photo‐switchable solid‐acid catalyst based on carbon quantum dots is described. The carbon quantum dots are decorated with small amounts of hydrogensulfate groups and thus exhibit a photogenerated acidity that produces a highly efficient acid catalysis of the ring opening of epoxides with methanol and other primary alcohols. This reversible, light‐switchable acidity is shown to be due to photoexcitation and charge separation in the carbon quantum dots, which create an electron withdrawing effect from the acidic groups. The catalyst is easily separated by filtration, and we demonstrate multiple cycles of its recovery and reuse.     

Graphitic C3N4 Decorated with CoP Co‐catalyst: Enhanced and Stable Photocatalytic H2 Evolution Activity from Water under Visible‐light Irradiation

In this work, graphitic C₃N₄ decorated with a CoP co‐catalyst (g‐C₃N₄/CoP) is reported for photocatalytic H₂ evolution reaction based on two‐step hydrothermal and phosphidation method. The structure of g‐C₃N₄/CoP is well confirmed by XRD, FTIR, TEM, XPS, and UV/Vis diffuse reflection spectra techniques. When the weight percentage of CoP loading is 3.4 wt % (g‐C₃N₄/CoP‐3.4 %), the highest H₂ evolution amount of 8.4×10² μmol g⁻¹ is obtained, which is 1.1×10³ times than that over pure g‐C₃N₄. This value also is comparable with that of g‐C₃N₄ loaded by the same amount of Pt. In cycling experiments, g‐C₃N₄/CoP‐3.4 % shows a stable photocatalytic activity. In addition, g‐C₃N₄/CoP‐3.4 % is an efficient photocatalyst for H₂ evolution under irradiation with natural solar light. Based on comparative photoluminescence emission spectra, photoelectrochemical I –t curves, EIS Nyquist plots, and polarization curves between g‐C₃N₄/CoP‐3.4 % and pure g‐C₃N₄, it is concluded that the presence of the CoP co‐catalyst accelerates the separation and transfer of photogenerated electrons of g‐C₃N₄, thus resulting in improved photocatalytic activity in the H₂ evolution reaction.     

Nature‐Inspired Environmental “Phosphorylation” Boosts Photocatalytic H2 Production over Carbon Nitride Nanosheets under Visible‐Light Irradiation

Inspired by the crucial roles of phosphates in natural photosynthesis, we explored an environmental “phosphorylation” strategy for boosting photocatalytic H₂ production over g‐C₃N₄ nanosheets under visible light. As expected, a substantial improvement was observed in the rate of H₂ evolution to 947 μmol h^?1, and the apparent quantum yield was as high as 26.1 % at 420 nm. The synergy of enhanced proton reduction and improved hole oxidation is proposed to account for the markedly increased activity. Our findings may provide a promising and facile approach to highly efficient photocatalysis for solar‐energy conversion.     

Homogenous Boron‐doping in Self‐sensitized Carbon Nitride for Enhanced Visible‐light Photocatalytic Activity

We report a solvothermal approach for the preparation of homogeneously B‐doped self‐sensitized carbon nitride (B‐SSCN) composed of a core of B‐doped carbon nitride microspheres and a covalently linked shell of s‐triazine oligomers. Compared to the undoped structure, the obtained B‐SSCN photocatalyst exhibits an enhanced visible‐light activity, excellent stability for photocatalytic hydrogen generation due to a reduced band‐gap, enhanced charge‐separation efficiency, and better surface reactivity of B‐SSCN. This work provides a new strategy to uniformly insert heteroatoms into the polymeric carbon nitride framework for the development of metal‐free photocatalysts towards efficient production of solar fuels.     

Designing a 0D/2D S‐Scheme Heterojunction over Polymeric Carbon Nitride for Visible‐Light Photocatalytic Inactivation of Bacteria

Constructing heterojunctions between two semiconductors with matched band structure is an effective strategy to acquire high‐efficiency photocatalysts. The S‐scheme heterojunction system has shown great potential in facilitating separation and transfer of photogenerated carriers, as well as acquiring strong photoredox ability. Herein, a 0D/2D S‐Scheme heterojunction material involving CeO₂ quantum dots and polymeric carbon nitride (CeO₂/PCN) is designed and constructed by in situ wet chemistry with subsequent heat treatment. This S‐scheme heterojunction material shows high‐efficiency photocatalytic sterilization rate (88.1 %) towards Staphylococcus aureus (S. aureus) under visible‐light irradiation (λ≥420 nm), which is 2.7 and 8.2 times that of pure CeO₂ (32.2 %) and PCN (10.7 %), respectively. Strong evidence of S‐scheme charge transfer path is verified by theoretical calculations, in situ irradiated X‐ray photoelectron spectroscopy, and electron paramagnetic resonance.     

Alloyed ZnS–CuInS2 Semiconductor Nanorods and Their Nanoscale Heterostructures for Visible‐Light‐Driven Photocatalytic Hydrogen Generation

A promising photocatalytic system in the form of heterostructured nanocrystals (HNCs) is presented wherein alloyed ZnS–CuInS₂ (ZCIS) semiconductor nanorods are decorated with Pt and Pd₄S nanoparticles. This is apparently the first report on the colloidal preparation and photocatalytic behavior of ZCIS–Pt and ZCIS–Pd₄S nanoscale heterostructures. Incorporation of Pt and Pd₄S cocatalysts leads to considerable enhancement of the photocatalytic activity of ZCIS for visible‐light‐driven hydrogen production.     

Samarium and Nitrogen Co‐Doped Bi2WO6 Photocatalysts: Synergistic Effect of Sm3+/Sm2+ Redox Centers and N‐Doped Level for Enhancing Visible‐Light Photocatalytic Activity

Samarium and nitrogen co‐doped Bi₂WO₆ nanosheets were successfully synthesized by using a hydrothermal method. The crystal structures, morphology, elemental compositions, and optical properties of the prepared samples were investigated. The incorporation of samarium and nitrogen ions into Bi₂WO₆ was proved by X‐ray diffraction, energy dispersive X‐ray spectroscopy, and X‐ray photoelectron spectroscopy. UV/Vis diffuse reflectance spectroscopy indicated that the samarium and nitrogen co‐doped Bi₂WO₆ possessed strong visible‐light absorption. Remarkably, the samarium and nitrogen co‐doped Bi₂WO₆ exhibited higher photocatalytic activity than single‐doped and pure Bi₂WO₆ under visible‐light irradiation. Radical trapping experiments indicated that holes (h⁺) and superoxide radicals ( ^. O₂^?) were the main active species. The results of photoluminescence spectroscopy and photocurrent measurements demonstrated that the recombination rate of the photogenerated electrons and holes pairs was greatly depressed. The enhanced activity was attributed to the synergistic effect of the in‐built Sm³⁺/Sm²⁺ redox pair centers and the N‐doped level. The mechanism of the excellent photocatalytic activity of Sm‐N‐Bi₂WO₆ is also discussed.     

Mechanistic Insights into the Interface‐Directed Transformation of Thiols into Disulfides and Molecular Hydrogen by Visible‐Light Irradiation of Quantum Dots

Quantum dots (QDs) offer new and versatile ways to harvest light energy. However, there are few examples involving the utilization of QDs in organic synthesis. Visible‐light irradiation of CdSe QDs was found to result in virtually quantitative coupling of a variety of thiols to give disulfides and H₂ without the need for sacrificial reagents or external oxidants. The addition of small amounts of nickel(II) salts dramatically improved the efficiency and conversion through facilitating the formation of hydrogen atoms, thereby leading to faster regeneration of the ground‐state QDs. Mechanistic studies reveal that the coupling reaction occurs on the QD surfaces rather than in solution and offer a blueprint for how these QDs may be used in other photocatalytic applications. Because no sacrificial agent or oxidant is necessary and the catalyst is reusable, this method may be useful for the formation of disulfide bonds in proteins as well as in other systems sensitive to the presence of oxidants.     

Visible‐Light Photocatalytic Activity and Deactivation Mechanism of Ag3PO4 Spherical Particles

Ag₃PO₄ spherical particles were synthesized by a facile precipitation method using silver nitrate and Na₂HPO₄ as precursors. The as‐prepared samples had a high photocatalytic activity toward Rhodamine B (RhB) degradation under visible‐light illumination. With increasing recycling times the photocatalytic activity first increased and then decreased. Based on systematic characterization of particles by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), UV/Vis absorption spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM), a possible mechanism responsible for the improvement and subsequent decline of the photocatalytic performance of Ag₃PO₄ is proposed. Ag₃PO₄ spherical particles recycled for four times showed the highest photocatalytic activity because, according to our mechanism, Ag nanoparticles deposited on Ag₃PO₄ acted as electron trapping centers to prevent photogenerated electron‐hole pairs from recombination. A further increase in the recycle times decreases the photocatalytic activity owing to the shielding effect by Ag layers on the surface of Ag₃PO₄. The results presented herein shed new light on the photostability of Ag₃PO₄ spherical particles and are potentially applicable to other photocatalytically active composites.     

Improvement of the Visible‐Light Photocatalytic Performance of TiO2 by Carbon Mesostructures

An improvement in the photodegradation performance for dyes due to interaction between carbon and titania in a self‐assembled mesoporous C? TiO₂ composite catalyst, even for the difficult degradation of azo dyes, is reported herein. The dye removal process involves adsorption of the dye from water by the mesoporous carbon–titania, followed by photodegradation on the separated dye‐loaded solid. Such adsorption–catalysis cycles can be carried out more than 80 times without discernible loss of photocatalytic activity or the anatase content of the composite. In each run, about 120 mg dye per g catalyst can be degraded. The mesoporous carbon–titania catalyst also exhibits a high capacity for converting methyl orange in aqueous solution under visible light. Characterization by XRD, TEM, and N₂ sorption techniques has revealed that the self‐assembled composite catalyst has an ordered mesostructure, uniform mesopores (4.3 nm), a large pore volume (0.30 cm³ g^?1), and a high surface area (348 m² g^?1). The pore walls are composed of amorphous carbon and anatase nanoparticles of size 4.2 nm, which are well dispersed and confined. X‐ray photoelectron spectroscopy (XPS), surface photovoltage spectroscopy (SPS), and UV/Vis absorption results indicate doping of carbon into the anatase lattice and a change in the bandgap of the semiconductor. The synergistic improvement in the composite catalyst can be attributed to the following features: (1) carbon doping of the anatase lattice modifies its bandgap and enhances its activity under visible light; (2) confinement within carbon pore walls prevents aggregation of tiny anatase nanoparticles, improving their activity and stability; (3) the mesopores provide a confined space for photocatalysis; and (4) the strong adsorption ability of porous carbon for organic substances ensures that large quantities can be processed and inhibits further diffusion of the adsorbed organic substances, thereby enhancing the mineralization on anatase.     

Construction of ZnIn2S4-CdIn2S4 Microspheres for Efficient Photo-catalytic Reduction of CO2 with Visible Light

ZnIn₂S₄ has emerged in water splitting and degradation of dyes due to its good stability and light absorption properties.However,there are still few reports of CO₂ photoreduction.Herein,we successfully synthesized ZnIn₂S₄ and obtained a series of ZnIn₂S₄-CdIn₂S₄ heterostructured microspheres through the ion exchange method,and first used them in photocatalytic CO₂ reduction in noble-metal-free systems.The activity results showed that these ZnIn₂S₄-CdIn₂S₄ photocatalysts exhibit excellent catalytic activity under visible light,and the best CO yield is as high as 33.57μmol?h^-1 with a selectivity of 91%.Furthermore,the stability and reusability of ZnIn₂S₄-CdIn₂S₄ was firmly confirmed by diverse characterizations,including X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),energy-dispersive X-ray spectroscopy(EDX)and N2 adsorption measurements.     

Synthesis of Hollow Mesoporous TiO2 Microspheres with Single and Double Au Nanoparticle Layers for Enhanced Visible‐Light Photocatalysis

A facile method was used to prepare hollow mesoporous TiO₂ and Au@TiO₂ spheres using polystyrene (PS) templates. Au nanoparticles (NPs) were simultaneously synthesized and attached on the surface of PS spheres by reducing AuCl₄^? ions using sodium citrate which resulted in the uniform deposition of Au NPs. The outer coating of titania via sol‐gel produced PS@Au@TiO₂ core–shell spheres. Removing the templates from these core–shell spheres through calcination produced hollow mesoporous and crystalline Au@TiO₂ spheres with Au NPs inside the TiO₂ shell in a single step. Anatase spheres with double Au NPs layers, one inside and another outside of TiO₂ shell, were also prepared. Different characterization techniques indicated the hollow mesoporous and crystalline morphology of the prepared spheres with Au NPs. Hollow anatase spheres with Au NPs indicated enhanced harvesting of visible light and therefore demonstrated efficient catalytic activity toward the degradation of organic dyes under the irradiation of visible light as compared to bare TiO₂ spheres.     

Synergy of Iron Doping and Cyano Groups for Enhanced Photocatalytic Hydrogen Production over C3N4

Improving the insufficient carrier separation dynamics is still of significance in carbon nitride (C₃N₄) research. Extensive research has been devoted to improving the carrier separation efficiency through a single strategy, while ignoring the synergistic enhancement effect produced by coupling two or more conventional strategies. Herein, we reported the fabrication of cyano group-containing Fe-doped C₃N₄ porous materials via direct co-calcination of iron acetylacetonate and melamine for synergistically improving the photocatalytic performance. Iron acetylacetonate can promote the generation of cyano groups and form Fe-doping in C₃N₄, thereby increasing the visible-light absorption and reactive sites. Further, the internal donor-acceptor system formed by cyano groups and Fe-doped sites promoted charge carrier separation and inhibited the radiation recombination of e⁻-h⁺ pairs. The optimized photocatalytic activity of Fe−CN-2 sample was 4.5 times of bulk C₃N₄ (BCN).     

Visible‐Light Photocatalytic Hydrogen Generation by Using Dye‐Sensitized Graphene Oxide as a Photocatalyst

Dye‐sensitized graphene oxide is able to generate hydrogen from water/methanol mixtures (80:20) by using visible or solar light. The most efficient photocatalyst tested contained a tris(2,2‐bipyridyl) ruthenium(II) complex incorporated in the interlayer spaces of a few layers of graphene oxide with a moderate degree of oxidation. The graphene oxide‐based photocatalyst does not contain noble metals and we have determined that it is two orders of magnitude more active than catalysts based on conventional titania.     

Construction of a 2D Graphene‐Like MoS2/C3N4 Heterojunction with Enhanced Visible‐Light Photocatalytic Activity and Photoelectrochemical Activity

A novel graphene‐like MoS₂/C₃N₄ (GL‐MoS₂/C₃N₄) composite photocatalyst has been synthesized by a facile ethylene glycol (EG)‐assisted solvothermal method. The structure and morphology of this GL‐MoS₂/C₃N₄ photocatalyst have been investigated by a wide range of characterization methods. The results showed that GL‐MoS₂ was uniformly distributed on the surface of GL‐C₃N₄ forming a heterostructure. The obtained composite exhibited strong absorbing ability in the ultraviolet (UV) and visible regions. When irradiated with visible light, the composite photocatalyst showed high activity superior to those of the respective individual components GL‐MoS₂ and GL‐C₃N₄ in the degradation of methyl orange. The enhanced photocatalytic activity of the composite may be attributed to the efficient separation of electron–hole pairs as a result of the matching band potentials between GL‐MoS₂ and GL‐C₃N₄. Furthermore, a photocatalytic mechanism for the composite material has been proposed, and the photocatalytic reaction kinetics has been measured. Moreover, GL‐MoS₂/C₃N₄ could serve as a novel sensor for trace amounts of Cu²⁺ since it exhibited good selectivity for Cu²⁺ detection in water.     

Visible‐Light‐Driven CO2 Reduction with Carbon Nitride: Enhancing the Activity of Ruthenium Catalysts

A heterogeneous photocatalyst system that consists of a ruthenium complex and carbon nitride (C₃N₄), which act as the catalytic and light‐harvesting units, respectively, was developed for the reduction of CO₂ into formic acid. Promoting the injection of electrons from C₃N₄ into the ruthenium unit as well as strengthening the electronic interactions between the two units enhanced its activity. The use of a suitable solvent further improved the performance, resulting in a turnover number of greater than 1000 and an apparent quantum yield of 5.7 % at 400 nm. These are the best values that have been reported for heterogeneous photocatalysts for CO₂ reduction under visible‐light irradiation to date.