OLED and PLED Devices Employing Electrogenerated,Intramolecular Charge‐Transfer Fluorescence

The light generating mechanism of a series of light emitting diodes with electron donor–bridge–acceptor systems (D–b–A) as the emitting species was examined by constructing model diodes based on small organic molecules (OLEDs) as well as on molecularly doped electroactive (poly‐N‐vinylcarbazole, PVK) and insulating (polystyrene, PS) polymers (PLEDs). The direct electrogeneration of an intramolecular charge‐transfer (CT) fluorescence of the donor–bridge–acceptor systems occurred readily in OLED devices with a D–b–A system as the emissive layer. In diodes with PS as the host matrix, hole‐injection and electron‐injection occurred directly in the D–b–A molecules residing close to the anode and the cathode, respectively. In the PVK diodes, hole‐injection occurred primarily into PVK and the positive charge carrier was subsequently trapped on the D–b–A molecule, whereas electron‐injection at the cathode side occurred directly into the D–b–A molecules. Charge‐hopping between neighboring molecules then occurred until a hole and electron resided on the same molecule, which is equivalent to the formation of the CT excited state, and which finally relaxed by intramolecular charge recombination under the emission of CT fluorescence.     

Charge‐Transfer Interactions in Tris‐Donor–Tris‐Acceptor Hexaarylbenzene Redox Chromophores

Symmetric‐ and asymmetric hexaarylbenzenes (HABs), each substituted with three electron‐donor triarylamine redox centers and three electron‐acceptor triarylborane redox centers, were synthesized by cobalt‐catalyzed cyclotrimerization, thereby forming compounds with six‐ and four donor–acceptor interactions, respectively. The electrochemical‐ and photophysical properties of these systems were investigated by cyclovoltammetry (CV), as well as by absorption‐ and fluorescence spectroscopy, and compared to a HAB that only contained one neighboring donor–acceptor pair. CV measurements of the asymmetric HAB show three oxidation peaks and three reduction peaks, whose peak‐separation is greatly influenced by the conducting salt, owing to ion‐pairing and shielding effects. Consequently, the peak‐separations cannot be interpreted in terms of the electronic couplings in the generated mixed‐valence species. Transient‐absorption spectra, fluorescence‐solvatochromism, and absorption spectra show that charge‐transfer states from the amine‐ to the boron centers are generated after optical excitation. The electronic donor–acceptor interactions are weak because the charge transfer has to occur predominantly through space. Moreover, the excitation energy of the localized excited charge‐transfer states can be redistributed between the aryl substituents of these multidimensional chromophores within the fluorescence lifetime (about 60 ns). This result was confirmed by steady‐state fluorescence‐anisotropy measurements, which further indicated symmetry‐breaking in the superficially symmetric HAB. Adding fluoride ions causes the boron centers to lose their accepting ability owing to complexation. Consequently, the charge‐transfer character in the donor–acceptor chromophores vanishes, as observed in both the absorption‐ and fluorescence spectra. However, the ability of the boron center as a fluoride sensor is strongly influenced by the moisture content of the solvent, possibly owing to the formation of hydrogen‐bonding interactions between water molecules and the fluoride anions.     

Ruthenium-phenothiazine electron transfer dyad with a photoswitchable dithienylethene bridge: flash-quench studies with methylviologen

A molecular ensemble composed of a phenothiazine (PTZ) electron donor, a photoisomerizable dithienylethene (DTE) bridge, and a Ru(bpy)(3)(2+) (bpy = 2,2'-bipyridine) electron acceptor was synthesized and investigated by optical spectroscopic and electrochemical means. Our initial intention was to perform flash-quench transient absorption studies in which the Ru(bpy)(3)(2+) unit is excited selectively ("flash") and its (3)MLCT excited state is quenched oxidatively ("quench") by excess methylviologen prior to intramolecular electron transfer from phenothiazine to Ru(III) across the dithienylethene bridge. However, after selective Ru(bpy)(3)(2+1)MLCT excitation of the dyad with the DTE bridge in its open form, (1)MLCT → (3)MLCT intersystem crossing on the metal complex is followed by triplet-triplet energy transfer to a (3)π-π* state localized on the DTE unit. This energy transfer process is faster than bimolecular oxidative quenching with methylviologen at the ruthenium site (Ru(III) is not observed); only the triplet-excited DTE then undergoes rapid (10 ns, instrumentally limited) bimolecular electron transfer with methylviologen. Subsequently, there is intramolecular electron transfer with PTZ. The time constant for formation of the phenothiazine radical cation via intramolecular electron transfer occurring over two p-xylene units is 41 ns. When the DTE bridge is photoisomerized to the closed form, PTZ(+) cannot be observed any more. Irrespective of the wavelength at which the closed isomer is irradiated, most of the excitation energy appears to be funneled rapidly into a DTE-localized singlet excited state from which photoisomerization to the open form occurs within picoseconds.     

Precise Control of Intramolecular Charge‐Transport: The Interplay of Distance and Conformational Effects

A new series of donor–bridge–acceptor (D–B–A) compounds consisting of π‐conjugated oligofluorene (oFL) bridges between a ferrocene (Fc) electron‐donor and a fullerene (C₆₀) electron‐acceptor have been synthesized. In addition to varying the length of the bridge (i.e., mono‐ and bi‐fluorene derivatives), four different ways of linking ferrocene to the bridge have been examined. The Fc moiety is linked to oFL: 1) directly without any spacer, 2) by an ethynyl linkage, 3) by a vinylene linkage, and 4) by a p‐phenylene unit. The electronic interactions between the electroactive species have been characterized by cyclic voltammetry, absorption, fluorescence, and transient absorption spectroscopy in combination with quantum chemical calculations. The calculations reveal exceptionally close energy‐matching between the Fc and the oFL units, which results in strong electronic‐coupling. Hence, intramolecular charge‐transfer may easily occur upon exciting either the oFLs or Fcs. Photoexcitation of Fc–oFL–C₆₀ conjugates results in transient radical‐ion‐pair states. The mode of linkage of the Fc and FL bridge has a profound effect on the photophysical properties. Whereas intramolecular charge‐separation is found to occur rather independently of the distance, the linker between Fc and oFL acts (at least in oFL) as a bottleneck and significantly impacts the intramolecular charge‐separation rates, resulting in beta values between β_CS 0.08 and 0.19 Å^?1. In contrast, charge recombination depends strongly on the electron‐donor–acceptor distance, but not at all on the linker. A value of β_CR (0.35±0.01 Å^?1) was found for all the systems studied. Oligofluorenes prove, therefore, to be excellent bridges for probing how small structural variations affect charge transport in D–B–A systems.     

Photonic switching of photoinduced electron transfer in a dithienylethene-porphyrin-fullerene triad molecule

A dithienylethene (DTE)-porphyrin (P)-fullerene (C(60)) triad molecule in which intramolecular photoinduced electron transfer is controlled by the photochromic DTE moiety has been prepared. Irradiation of the molecule with visible light gives the open form of the dithienylethene (DTEo). Excitation of the porphyrin gives DTEo-(1)P-C(60), which undergoes photoinduced electron transfer with a time constant of 25 ps to generate DTEo-P(.+)-C(60)(.-). Irradiation with ultraviolet light produces the closed form of the dithienylethene (DTEc). Excitation of DTEc-P-C(60) yields DTEc-(1)P-C(60), whose porphyrin first excited singlet state is quenched in 2.3 ps by singlet-singlet energy transfer to DTEc, generating (1)DTEc-P-C(60) and precluding significant photoinduced electron transfer. Such highly reversible photonically controlled intramolecular photoinduced electron transfer may eventually be useful in the design of photonic or optoelectronic devices.     

Multicolored‐Fluorescence Switching of ICT‐Type Organic Solids with Clear Color Difference: Mechanically Controlled Excited State

A donor–acceptor‐type fluorophore containing a twisted diphenylacrylonitrile and triphenylamine has been developed by using the Suzuki reaction. The system indicates typical intramolecular charge‐transfer properties. Upon mechanical grinding or hydrostatic pressure, the fluorophore reveals a multicolored fluorescence switching. Interestingly, a fluorescence color transition from green to red was clearly observed, and the change of photoluminescent (PL) wavelength gets close to 111 nm. The mechanisms of high‐contrast mechanochromic behavior are fully investigated by techniques including powder XRD, PL lifetime, high‐pressure PL lifetime, and Raman spectra analysis. The tremendous PL wavelength shift is attributed to gradual transition of excited states from the local excited state to the charge‐transfer state.     

Combining Light Harvesting and Electron Transfer in Silica–Titania‐Based Organic–Inorganic Hybrid Materials

A convenient protocol to fabricate an organic–inorganic hybrid system with covalently bound light‐harvesting chromophores (stilbene and terphenylene–divinylene) and an electron acceptor (titanium oxide) is described. Efficient energy‐ and electron‐transfer processes may take place in these systems. Covalent bonding between the acceptor chromophores and the titania/silica matrix would be important for electron transfer, whereas fluorescence resonant energy transfer (FRET) would strongly depend on the ratio of donor to acceptor chromophores. Time‐resolved spectroscopy was employed to elucidate the detailed photophysical processes. The coupling of FRET and electron transfer was shown to work coherently to lead to photocurrent enhancement. The photocurrent responses reached a maximum when the hybrid‐material thin film contained 60 % acceptor and 40 % donor.     

From Dark to Light to Fluorescence Resonance Energy Transfer (FRET): Polarity‐Sensitive Aggregation‐Induced Emission (AIE)‐Active Tetraphenylethene‐Fused BODIPY Dyes with a Very Large Pseudo‐Stokes Shift

The work presented herein is devoted to the fabrication of large Stokes shift dyes in both organic and aqueous media by combining dark resonance energy transfer (DRET) and fluorescence resonance energy transfer (FRET) in one donor–acceptor system. In this respect, a series of donor–acceptor architectures of 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) dyes substituted by one, two, or three tetraphenylethene (TPE) luminogens were designed and synthesised. The photophysical properties of these three chromophore systems were studied to provide insight into the nature of donor–acceptor interactions in both THF and aqueous media. Because the generation of emissive TPE donor(s) is strongly polarity dependent, due to its aggregation‐induced emission (AIE) feature, one might expect the formation of appreciable fluorescence emission intensity with a very large pseudo‐Stokes shift in aqueous media when considering FRET process. Interestingly, similar results were also recorded in THF for the chromophore systems, although the TPE fragment(s) of the dyes are non‐emissive. The explanation for this photophysical behaviour lies in the DRET. This is the first report on combining two energy‐transfer processes, namely, FRET and DRET, in one polarity‐sensitive donor–acceptor pair system. The accuracy of the dark‐emissive donor property of the TPE luminogen is also presented for the first time as a new feature for AIE phenomena.     

Ultrafast Photoinduced Charge Separation Leading to High‐Energy Radical Ion‐Pairs in Directly Linked Corrole–C60 and Triphenylamine–Corrole‐C60 Donor–Acceptor Conjugates

Closely positioned donor–acceptor pairs facilitate electron‐ and energy‐transfer events, relevant to light energy conversion. Here, a triad system TPACor‐C₆₀ , possessing a free‐base corrole as central unit that linked the energy donor triphenylamine ( TPA ) at the meso position and an electron acceptor fullerene (C₆₀) at the β‐pyrrole position was newly synthesized, as were the component dyads TPA‐Cor and Cor‐C₆₀ . Spectroscopic, electrochemical, and DFT studies confirmed the molecular integrity and existence of a moderate level of intramolecular interactions between the components. Steady‐state fluorescence studies showed efficient energy transfer from ¹ TPA* to the corrole and subsequent electron transfer from ¹corrole* to fullerene. Further studies involving femtosecond and nanosecond laser flash photolysis confirmed electron transfer to be the quenching mechanism of corrole emission, in which the electron‐transfer products, the corrole radical cation ( Cor^?+ in Cor‐C₆₀ and TPA‐Cor^?+ in TPACor‐C₆₀ ) and fullerene radical anion (C₆₀^??), could be spectrally characterized. Owing to the close proximity of the donor and acceptor entities in the dyad and triad, the rate of charge separation, k_CS, was found to be about 10¹¹ s^?1, suggesting the occurrence of an ultrafast charge‐separation process. Interestingly, although an order of magnitude slower than k_CS, the rate of charge recombination, k_CR, was also found to be rapid (k_CR≈10¹⁰ s^?1), and both processes followed the solvent polarity trend DMF>benzonitrile>THF>toluene. The charge‐separated species relaxed directly to the ground state in polar solvents while in toluene, formation of ³corrole* was observed, thus implying that the energy of the charge‐separated state in a nonpolar solvent is higher than the energy of ³corrole* being about 1.52 eV. That is, ultrafast formation of a high‐energy charge‐separated state in toluene has been achieved in these closely spaced corrole–fullerene donor–acceptor conjugates.     

Structure–Property Relationships in Click‐Derived Donor–Triazole–Acceptor Materials

To shed light on intramolecular charge‐transfer phenomena in 1,2,3‐triazole‐linked materials, a series of 1,2,3‐triazole‐linked push–pull chromophores were prepared and studied experimentally and computationally. Investigated modifications include variation of donor and/or acceptor strength and linker moiety as well as regioisomers. Photophysical characterization of intramolecular charge‐transfer features revealed ambipolar behavior of the triazole linker, depending on the substitution position. Furthermore, non‐centrosymmetric materials were subjected to second‐harmonic generation measurements, which revealed the high nonlinear optical activity of this class of materials.     

Charge‐Recombination Fluorescence from Push–Pull Electronic Systems Constructed around Amino‐Substituted Styryl–BODIPY Dyes

A small series of donor–acceptor molecular dyads has been synthesized and fully characterized. In each case, the acceptor is a dicyanovinyl unit and the donor is a boron dipyrromethene (BODIPY) dye equipped with a single styryl arm bearing a terminal amino group. In the absence of the acceptor, the BODIPY‐based dyes are strongly fluorescent in the far‐red region and the relaxed excited‐singlet states possess significant charge‐transfer character. As such, the emission maxima depend on both the solvent polarity and temperature. With the corresponding push–pull molecules, there is a low‐energy charge‐transfer state that can be observed by both absorption and emission spectroscopy. Here, charge‐recombination fluorescence is weak and decays over a few hundred picoseconds or so to recover the ground state. Overall, these results permit evaluation of the factors affecting the probability of charge‐recombination fluorescence in push–pull dyes. The photophysical studies are supported by cyclic voltammetry and DFT calculations.     

Photocatalytic Hydrogen Evolution Based on Efficient Energy and Electron Transfers in Donor–Bridge–Acceptor Multibranched‐Porphyrin‐Functionalized Platinum Nanocomposites

Two donor–bridge–acceptor conjugates (5,10,15,20‐tetrakis[4‐(N,N‐diphenylaminobenzoate)phenyl] porphyrin (TPPZ) and 5,10,15,20‐tetrakis[4‐(N,N‐diphenylaminostyryl)phenyl] porphyrin (TPPX)) were covalently linked to triphenylamine (TPA) at the meso‐position of porphyrin ring. The triphenylamine entities were expected to act as energy donors and the porphyrins to act as an energy acceptor. In this paper, we report on the synthesis of these multibranched‐porphyrin‐functionalized Pt nanocomposites. The conjugates used here not only served as a stabilizer to prevent agglomeration of Pt nanoparticles, but also as a light‐harvesting photosensitizer. The occurrence of photoinduced electron‐transfer processes was confirmed by time‐resolved fluorescence and photoelectrochemical spectral measurements. The different efficiencies for energy and electron transfer in the two multibranched porphyrins and the functionalized Pt nanocomposites were attributed to diverse covalent linkages. Moreover, in the reduction of water to produce H₂, the photocatalytic activity of the Pt nanocomposite functionalized by TPPX, in which the triphenylamine and porphyrin moieties are bonded through an ethylene bridge, was much higher than that of the platinum nanocomposite functionalized by TPPZ, in which the two moieties are bonded through an ester. This investigation demonstrates the fundamental advantages of constructing donor–bridge–acceptor conjugates as highly efficient photosensitizers based on efficient energy and electron transfer.     

Long‐range charge transfer in donor‐peptide bridge‐acceptor model systems—A theoretical study

The quantum mechanical calculations were performed to study the effect of geometrical fluctuations of peptide on charge transfer in model oligopeptides linked between donor and acceptor molecules. The charge transfer parameters have been calculated based on the density functional theory method. Results show that the overall charge transfer in peptide mediated donor–acceptor complexes is determined by the conformations and chain length of the intermediate peptide bridge. The analysis of excess charge distribution show that the localization of an excess positive and negative charge are strongly depend on the conformations and chain length of the donor–bridge‐acceptor system. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Self‐Assembled Architectures with Segregated Donor and Acceptor Units of a Dyad Based on a Monopyrrolo‐Annulated TTF–PTM Radical

An electron donor–acceptor dyad based on a polychlorotriphenylmethyl (PTM) radical subunit linked to a tetrathiafulvalene (TTF) unit through a π‐conjugated N‐phenyl–pyrrole–vinylene bridge has been synthesized and characterized. The intramolecular electron transfer process and magnetic properties of the radical dyad have been evaluated by cyclic voltammetry, UV/Vis spectroscopy, vibrational spectroscopy, and ESR spectroscopy in solution and in the solid state. The self‐assembling abilities of the radical dyad and of its protonated non‐radical analogue have been investigated by X‐ray crystallographic analysis, which revealed that the radical dyad produced a supramolecular architecture with segregated donor and acceptor units in which the TTF subunits were arranged in 1D herringbone‐type stacks. Analysis of the X‐ray data at different temperatures suggests that the two inequivalent molecules that form the asymmetric unit of the crystal of the radical dyad evolve into an opposite degree of electronic delocalization as the temperature decreases.     

Dynamics of Photoinduced Electron‐Transfer Processes in Fullerene‐Based Dyads: Effects of Varying the Donor Strength

Two classes of fullerene‐based donor–bridge–acceptor (D–B–A) systems containing donors of varying oxidation potentials have been synthesized. These systems include fullerenes linked to heteroaromatic donor groups (phenothiazine/phenoxazine) as well as substituted anilines (p‐anisidine/p‐toluidine). In contrast to the model compound, an efficient intramolecular electron transfer is observed from the fullerene singlet excited state in polar solvents. An increase in the rate constant and quantum yield of charge separation (k_cs and Φ_cs) has been observed for both classes of dyads, with decrease in the oxidation potentials of the donor groups. This observation indicates that the rates of the forward electron transfer fall in the normal region of the Marcus curve. The long‐lived charge separation enabled the characterization of electron transfer products, namely, the radical cation of the donor and radical anion of the pyrrolidinofullerene, by using nanosecond transient absorption spectroscopy. The small reorganization energy (λ) of C₆₀ coupled with large negative free energy changes (‐ΔG°) for the back electron transfer places the back electron process in the inverted region of Marcus curve, thereby stabilizing the electron transfer products.     

Redox‐Active Metal–Organic Frameworks: Highly Stable Charge‐Separated States through Strut/Guest‐to‐Strut Electron Transfer

Molecular organization of donor and acceptor chromophores in self‐assembled materials is of paramount interest in the field of photovoltaics or mimicry of natural light‐harvesting systems. With this in mind, a redox‐active porous interpenetrated metal–organic framework (MOF), {[Cd(bpdc)(bpNDI)] ? 4.5 H₂O ? DMF}_n ( 1 ) has been constructed from a mixed chromophoric system. The μ‐oxo‐bridged secondary building unit, {Cd₂(μ‐OCO)₂}, guides the parallel alignment of bpNDI (N,N′‐di(4‐pyridyl)‐1,4,5,8‐naphthalenediimide) acceptor linkers, which are tethered with bpdc (bpdcH₂=4,4′‐biphenyldicarboxylic acid) linkers of another entangled net in the framework, resulting in photochromic behaviour through inter‐net electron transfer. Encapsulation of electron‐donating aromatic molecules in the electron‐deficient channels of 1 leads to a perfect donor–acceptor co‐facial organization, resulting in long‐lived charge‐separated states of bpNDI. Furthermore, 1 and guest encapsulated species are characterised through electrochemical studies for understanding of their redox properties.     

Photoelectrodes based on acceptor–donor assemblies in functionalized polypyrrole films

The capability to act as molecular photoelectrodes under visible light irradiation of optically transparent electrodes (ITO) modified by thin films of polypyrrole containing several kind of electron acceptor–donor assemblies has been examined. Photolysis of electrodes coated by thin films of polypyrrole substituted by a reversible electron donor (phenothiazine) in the presence of an irreversible electron acceptor (tropylium cation) in acetonitrile gives weak photocurrents. In contrast, appreciable photocurrents can be obtained using a symmetrical arrangement; viologen as reversible electron acceptor, benzilate anion as irreversible donor. The photoresponses result from the photo-induced charge separation of the charge transfer complexes created in the film. The measured photocurrents are markedly larger (up to five times), with films of polypyrrole substituted by a reversible electron acceptor (viologen) covalently linked with a donor (phenothiazine, triphenylamine or benzidine) than with the unimolecular immobilized system in similar experimental conditions. The greater efficiency of these materials is attributed to the formation of an intramolecular charge transfer complex occurring inside films between the two molecular entities. Markedly weaker photocurrents are obtained with polypyrrole films based on bilayers of the two independent components than those with the unimolecular design, while films based on copolymers arrangements give moderately weaker photoresponses.     

Reducing the Exciton Binding Energy of Donor–Acceptor‐Based Conjugated Polymers to Promote Charge‐Induced Reactions

Exciton binding energy has been regarded as a crucial parameter for mediating charge separation in polymeric photocatalysts. Minimizing the exciton binding energy of the polymers can increase the yield of charge‐carrier generation and thus improve the photocatalytic activities, but the realization of this approach remains a great challenge. Herein, a series of linear donor–acceptor conjugated polymers has been developed to minimize the exciton binding energy by modulating the charge‐transfer pathway. The results reveal that the reduced energy loss of the charge‐transfer state can facilitate the electron transfer from donor to acceptor, and thus, more electrons are ready for subsequent reduction reactions. The optimized polymer, FSO‐FS, exhibits a remarkable photochemical performance under visible light irradiation.     

Diels–Alder Polymer Networks with Temperature‐Reversible Cross‐Linking‐Induced Emission

A novel synthetic strategy gives reversible cross‐linked polymeric materials with tunable fluorescence properties. Dimaleimide‐substituted tetraphenylethene (TPE‐2MI), which is non‐emissive owing to the photo‐induced electron transfer (PET) between maleimide (MI) and tetraphenylethene (TPE) groups, was used to cross‐link random copolymers of methyl (MM), decyl (DM) or lauryl (LM) methacrylate with furfuryl methacrylate (FM). The mixture of copolymer and TPE‐2MI in DMF showed reversible fluorescence with “on/off” behavior depending on the Diels–Alder (DA)/retro‐DA process, which is easily adjusted by temperature. At high temperatures, the retro‐DA reaction is dominant, and the fluorescence is quenched by the photo‐induced electron transfer (PET) mechanism. In contrast, at low temperatures, the emission recovers as the DA reaction takes over. A transparent PMFM/TPE‐2MI polymer film was prepared which shows an accurate response to the external temperature and exhibited tunable fluorescent “turn on/off” behavior. These results suggest the possible application in areas including information security and transmission. An example of invisible/visible writing is given.     

Photoinduced Electron Transfer within a Zinc Porphyrin–Cyclobis(paraquat‐p‐phenylene) Donor–Acceptor Dyad

Understanding the mechanism of efficient photoinduced electron‐transfer processes is essential for developing molecular systems for artificial photosynthesis. Towards this goal, we describe the synthesis of a donor–acceptor dyad comprising a zinc porphyrin donor and a tetracationic cyclobis(paraquat‐p‐phenylene) (CBPQT⁴⁺) acceptor. The X‐ray crystal structure of the dyad reveals the formation of a dimeric motif through the intermolecular coordination between the triazole nitrogen and the central Zn metal of two adjacent units of the dyad. Photoinduced electron transfer within the dyad in MeCN was investigated by femtosecond and nanosecond transient absorption spectroscopy, as well as by transient EPR spectroscopy. Photoexcitation of the dyad produced a weakly coupled ZnP^+.–CBPQT^3+. spin‐correlated radical‐ion pair having a τ=146 ns lifetime and a spin–spin exchange interaction of only 0.23 mT. The long radical‐ion‐pair lifetime results from weak donor–acceptor electronic coupling as a consequence of having nine bonds between the donor and the acceptor, and the reduction in reorganization energy for electron transfer caused by charge dispersal over both paraquat units within CBPQT^3+..