Oligo(p‐phenylene‐ethynylene)‐Derived Super‐π‐Gelators with Tunable Emission and Self‐Assembled Polymorphic Structures

Linear π‐conjugated oligomers are known to form organogels through noncovalent interactions. Herein, we report the effect of π‐repeat units on the gelation and morphological properties of three different oligo(p‐phenylene‐ethynylene)s: OPE3 , OPE5 , and OPE7 . All of these molecules form fluorescent gels in nonpolar solvents at low critical gel concentrations, thereby resulting in a blue gel for OPE3 , a green gel for OPE5 , and a greenish yellow gel for OPE7 . The molecule–molecule and molecule–substrate interactions in these OPEs are strongly influenced by the conjugation length of the molecules. Silicon wafer suppresses substrate–molecule interactions whereas a mica surface facilitates such interactions. At lower concentrations, OPE3 formed vesicular assemblies and OPE5 gave entangled fibers, whereas OPE7 resulted in spiral assemblies on a mica surface. At higher concentrations, OPE3 and OPE5 resulted in super‐bundles of fibers and flowerlike short‐fiber agglomerates when different conditions were applied. The number of polymorphic structures increases on increasing the conjugation length, as seen in the case of OPE7 with n=5, which resulted in a variety of exotic structures, the formation of which could be controlled by varying the substrate, concentration, and humidity.     

Oligopeptide‐Assisted Self‐Assembly of Oligothiophenes: Co‐Assembly and Chirality Transfer

The biomolecule‐assisted self‐assembly of semiconductive molecules has been developed recently for the formation of potential bio‐based functional materials. Oligopeptide‐assisted self‐assembly of oligothiophene through weak intermolecular interactions was investigated; specifically the self‐assembly and chirality‐transfer behavior of achiral oligothiophenes in the presence of an oligopeptide with a strong tendency to form β‐sheets. Two kinds of oligothiophenes without (QT) or with (QTDA) carboxylic groups were selected to explore the effect of the end functional group on self‐assembly and chirality transfer. In both cases, organogels were formed. However, the assembly behavior of QT was quite different from that of QTDA. It was found that QT formed an organogel with the oligopeptide and co‐assembled into chiral nanostructures. Conversely, although QTDA also formed a gel with the oligopeptide, it has a strong tendency to self‐assemble independently. However, during the formation of the xerogel, the chirality of the oligopeptide can also be transferred to the QTDA assemblies. Different assembly models were proposed to explain the assembly behavior.     

Chiral Carbonaceous Nanotubes Containing Twisted Carbonaceous Nanoribbons,Prepared by the Carbonization of Chiral Organic Self‐Assemblies

Single‐handed helical silica nanotubes containing chiral organic self‐assemblies were prepared by using a supramolecular templating approach. After carbonization and the removal of the silica, single‐handed helical carbonaceous nanotubes that contained twisted carbonaceous nanoribbons were obtained. It is believed that the nanotubes formed as a result of the adsorption of low‐molecular‐weight gelators. The twisted nanoribbons were formed because of the carbonization of the organic self‐assemblies. The samples were characterized by using field‐emission scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, Raman spectroscopy, and circular dichroism. For the samples carbonized at 900 °C for 3.0 h, a partially graphitized structure was identified. The circular dichroism (CD) spectra indicated that the twisted nanoribbons exhibited optical activity. The CD spectrum was simulated by using time‐dependent density functional theory. The results suggested that the CD signals originated from the chiral stacking of aromatic rings.     

Solvent‐Polarity‐Tuned Morphology and Inversion of Supramolecular Chirality in a Self‐Assembled Pyridylpyrazole‐Linked Glutamide Derivative: Nanofibers,Nanotwists, Nanotubes,and Microtubes

The self‐assembly of a low‐molecular‐weight organogelator into various hierarchical structures has been achieved for a pyridylpyrazole linked L ‐glutamide amphiphile in different solvents. Upon gel formation, supramolecular chirality was observed, which exhibited an obvious dependence on the polarity of the solvent. Positive supramolecular chirality was obtained in nonpolar solvents, whereas it was inverted into negative supramolecular chirality in polar solvents. Moreover, the gelator molecules self‐assembled into a diverse array of nanostructures over a wide scale range, from nanofibers to nanotubes and microtubes, depending on the solvent polarity. Such morphological changes could even occur for the xerogels in the solvent vapors. We found that the interactions between the pyridylpyrazole headgroups and the solvents could subtly change the stacking of the molecules and, hence, their self‐assembled nanostructures. This work exemplifies that organic solvents can significantly involve the gelation, as well as tune the structure and properties, of a gel.     

Dynamic Formation of Hybrid Peptidic Capsules by Chiral Self‐Sorting and Self‐Assembly

Owing to their versatility and biocompatibility, peptide‐based self‐assembled structures constitute valuable targets for complex functional designs. It is now shown that artificial capsules based on β‐barrel binding motifs can be obtained by means of dynamic covalent chemistry (DCC) and self‐assembly. Short peptides (up to tetrapeptides) are reversibly attached to resorcinarene scaffolds. Peptidic capsules are thus selectively formed in either a heterochiral or a homochiral way by simultaneous and spontaneous processes, involving chiral sorting, tautomerization, diastereoselective induction of inherent chirality, and chiral self‐assembly. Self‐assembly is shown to direct the regioselectivity of reversible chemical reactions. It is also responsible for shifting the tautomeric equilibrium for one of the homochiral capsules. Two different tautomers (keto‐enamine hemisphere and enol‐imine hemisphere) are observed in this capsule, allowing the structure to adapt for self‐assembly.     

Chiral Hexa‐ and Nonamethylene‐Bridged Bis(L‐Leu‐oxalamide) Gelators: The First Oxalamide Gels Containing Aggregates with a Chiral Morphology

Chiral amino acid‐ and amino alcohol‐oxalamides are well‐known as versatile and efficient gelators of various lipophilic and polar organic solvents and water. To further explore the capacity of the amino acid/oxalamide structural fragment as a gelation‐generating motif, the dioxalamide dimethyl esters 1₆Me and 1₉Me , and dicarboxylic acid 2₆OH / 2₉OH derivatives containing flexible methylene bridges with odd ( 9 ; n=7) and even ( 6 ; n=4) numbers of methylene groups were prepared. Their self‐assembly motifs and gelation properties were studied by using a number of methods (FTIR, ¹H NMR spectroscopy, CD, TEM, DSC, XRPD, molecular modeling, MMFF94, and DFT). In contrast to the previously studied chiral bis(amino acid or amino alcohol) oxalamide gelators, in which no chiral morphology was ever observed in the gels, the conformationally more flexible 1₆Me , 1₉Me , 2₆OH , and 2₉OH provide gelators that are capable of forming diverse aggregates of achiral and chiral morphologies, such as helical fibers, twisted tapes, nanotubules, straight fibers, and tapes, in some cases coexisting in the same gel sample. It is shown that the differential scanning calorimetry (DSC)‐determined gelation enthalpies could not be correlated with gelator and solvent clogP values. Spectroscopic results show that intermolecular hydrogen‐bonding between the oxalamide units provides the major and self‐assembly directing intermolecular interaction in the aggregates. Molecular modeling studies reveal that molecular flexibility of gelators due to the presence of the polymethylene bridges gives three conformations ( zz , p1 , and p2 ) close in energy, which could form oxalamide hydrogen‐bonded layers. The aggregates of the p1 and p2 conformations tend to twist due to steric repulsion between neighboring iBu groups at chiral centers. The X‐ray powder diffraction (XRPD) results of 1₆Me and 1₉Me xerogels prove the formation of p1 and p2 gel aggregates, respectively. The latter results explain the formation of gel aggregates with chiral morphology and also the simultaneous presence of aggregates of diverse morphology in the same gel system.     

Cluster‐Based Self‐Assembly Route toward MoO3 Single‐Walled Nanotubes

MoO₃ has a unique rigid double‐layer structure, which makes it a real challenge to prepare nanotubular structures. The controlled synthesis of MoO₃ single‐walled nanotubes (SWNTs) is achieved through a cluster‐based self‐assembly route on the dodecanethiol/water interface. Various factors are studied at length, including precursor type, reaction time, temperature, pH value, and their influence on the morphology of products. The concept of “self‐assembly—from simple clusters to nanostructures” is proposed here based on preliminary results from the synthesis of MoO₃ SWNTs, which provides a new aspect for traditional synthetic chemistry of nanomaterials and polyoxometalates.     

Herringbone and Helical Self‐Assembly of π‐Conjugated Molecules in the Solid State through CH/π Hydrogen Bonds

Self‐organization of organic molecules through weak noncovalent forces such as CH/π interactions and creation of large hierarchical supramolecular structures in the solid state are at the very early stage of research. The present study reports direct evidence for CH/π interaction driven hierarchical self‐assembly in π‐conjugated molecules based on custom‐designed oligophenylenevinylenes (OPVs) whose structures differ only in the number of carbon atoms in the tails. Single‐crystal X‐ray structures were resolved for these OPV synthons and the existence of long‐range multiple‐arm CH/π interactions was revealed in the crystal lattices. Alignment of these π‐conjugated OPVs in the solid state was found to be crucial in producing either right‐handed herringbone packing in the crystal or left‐handed helices in the liquid‐crystalline mesophase. Pitch‐ and roll‐angle displacements of OPV chromophores were determined to trace the effect of the molecular inclination on the ordering of hierarchical structures. Furthermore, circular dichroism studies on the OPVs were carried out in the aligned helical structures to prove the existence of molecular self‐assembly. Thus, the present strategy opens up new approaches in supramolecular chemistry based on weak CH/π hydrogen bonding, more specifically in π‐conjugated materials.     

Self‐Assembly Studies of a Chiral Bisurea‐Based Superhydrogelator

A chiral bisurea‐based superhydrogelator that is capable of forming supramolecular hydrogels at concentrations as low as 0.2 mM is reported. This soft material has been characterized by thermal studies, rheology, X‐ray diffraction analysis, transmission electron microscopy (TEM), and by various spectroscopic techniques (electronic and vibrational circular dichroism and by FTIR and Raman spectroscopy). The expression of chirality on the molecular and supramolecular levels has been studied and a clear amplification of its chirality into the achiral analogue has been observed. Furthermore, thermal analysis showed that the hydrogelation of compound 1 has a high response to temperature, which corresponds to an enthalpy‐driven self‐assembly process. These particular thermal characteristics make these materials easy to handle for soft‐application technologies.     

Chiral Perylene Diimides: Building Blocks for Ionic Self‐Assembly

A chiral perylene diimide building block has been prepared based on an amine derivative of the amino acid L ‐phenylalanine. Detailed studies were carried out into the self‐assembly behaviour of the material in solution and the solid state using UV/Vis, circular dichroism (CD) and fluorescence spectroscopy. For the charged building block BTPPP, the molecular chirality of the side chains is translated into the chiral supramolecular structure in the form of right‐handed helical aggregates in aqueous solution. Temperature‐dependent UV/Vis studies of BTPPP in aqueous solution showed that the self‐assembly behaviour of this dye can be well described by an isodesmic model in which aggregation occurs to generate short stacks in a reversible manner. Wide‐angle X‐ray diffraction studies (WXRD) revealed that this material self‐organises into aggregates with π–π stacking distances typical for π‐conjugated materials. TEM investigations revealed the formation of self‐assembled structures of low order and with no expression of chirality evident. Differential scanning calorimetry (DSC) and polarised optical microscopy (POM) were used to investigate the mesophase properties. Optical textures representative of columnar liquid–crystalline phases were observed for solvent‐annealed samples of BTPPP. The high solubility, tunable self‐assembly and chiral ordering of these materials demonstrate their potential as new molecular building blocks for use in the construction of chiro‐optical structures and devices.     

Self‐Assembly of Bis(merocyanine) Tweezers into Discrete Bimolecular π‐Stacks

Dipolar aggregation : Examples of a novel class of tweezer molecules have been constructed through the tethering of two dipolar merocyanine chromophores. The electrostatic‐interaction‐directed self‐assembly of these tweezers affords centrosymmetric bimolecular complexes with a unique aggregate geometry of four π‐stacked chromophores (see picture) with an alternating arrangement of their dipole moments and very high dimerization constants, even in the good solvating solvent chloroform.

     

Fabrication of Chiral Materials via Self‐Assembly and Biomineralization of Peptides

With different scales of chirality, chiral materials have various particular properties and potential applications in many fields. Peptides are the fundamental building units of biological systems, and a variety of ordered functional nanostructures are produced through self‐assembly and biomineralization of peptides in nature. This Personal Account describes chiral silica materials fabricated by using amphiphilic peptides as building blocks. Three particular biomineralization approaches are described based on different kinds of geometry of amphiphilic peptides: the influence of the specific amino acid proline in the peptide sequence, the hydrophilicity of amphiphilic peptides, and different kinds of hydrophobic tails in amphiphilic peptides. These strategies are useful for designing peptides toward the bottom‐up synthesis of nanomaterials as well as improving the understanding of the mechanism of peptide self‐assembly.     

Self‐Assembly of α‐Helical Polypeptides Driven by Complex Coacervation

Reported is the ability of α‐helical polypeptides to self‐assemble with oppositely‐charged polypeptides to form liquid complexes while maintaining their α‐helical secondary structure. Coupling the α‐helical polypeptide to a neutral, hydrophilic polymer and subsequent complexation enables the formation of nanoscale coacervate‐core micelles. While previous reports on polypeptide complexation demonstrated a critical dependence of the nature of the complex (liquid versus solid) on chirality, the α‐helical structure of the positively charged polypeptide prevents the formation of β‐sheets, which would otherwise drive the assembly into a solid state, thereby, enabling coacervate formation between two chiral components. The higher charge density of the assembly, a result of the folding of the α‐helical polypeptide, provides enhanced resistance to salts known to inhibit polypeptide complexation. The unique combination of properties of these materials can enhance the known potential of fluid polypeptide complexes for delivery of biologically relevant molecules.     

Controllable Peptide–Dendron Self‐Assembly: Interconversion of Nanotubes and Fibrillar Nanostructures

Roll up : A peptide–dendron hybrid (PDH) is capable of self‐assembling into either a soluble nanotube or an amyloid‐like fibrillar network. The structures interconvert on adjusting the salt concentration or pH value. Their hydrophobic interfaces efficiently encapsulate hydrophobic molecules in water which can then be released by lowering the pH value.

     

Self‐Assembly of Polyaniline/Au Composites: From Nanotubes to Nanofibers

Summary: Polyaniline (PANI)/Au composite nanotubes and nanofibers are synthesized through a self‐assembly process in the presence of camphorsulfonic acid and hydrochloric acid, as dopants, respectively. The PANI/Au composites are characterized by FT‐IR, UV‐vis, and thermogravimetric analysis to verify the incorporation of the Au nanoparticles and determine the Au content. Structural characterization is performed using SEM, TEM and X‐ray diffraction. The presence of the Au nanoparticles results in an increased conductivity and improved crystallinity of the PANI. The self‐assembly method employed here is a simple and inexpensive route to synthesize multifunctional nanotubes and nanofibers and could be extended to prepare other inorganic nanoparticle/PANI composites.

TEM image of PANI/Au nanotubes.     

A Highly Efficient Self‐Assembly of Responsive C2‐Cyclohexane‐Derived Gelators

The rational design and synthesis of a family of effective low‐molecular‐weight gelators (LMWGs) with a modular architecture based on a C₂‐1,4‐diamide cyclohexane core are reported. Due to the high symmetry, the gelators are initially well distributed in solution and no trapped aggregates are formed before the assembly is triggered. The subsequent self‐assembly process, which results in the formation of versatile gels, is highly efficient and can be triggered and tuned due to its remarkable dependence on the pH of solution. The assembly of different gelators is found to be closely related to the pK_a of the corresponding functional substituents on the LMWGs. Primary cell culture experiments reveal that the hydrogels made under physiological conditions are promising as potential tailor‐made microenvironments.     

Self‐Assembly of Coronene Bisimides: Mechanistic Insight and Chiral Amplification

The study of the organization of small π‐conjugated molecules is imperative to understanding and controlling its properties for various applications. Coronene bisimides (CBIs) are potential candidates for novel liquid‐crystalline materials and active n‐type semiconductor molecules in organic electronics. To understand the self‐assembly of this seldom‐studied chromophore, we have designed two derivatives of CBIs bearing chiral and achiral 3,4,5‐trialkoxyphenyl groups at the imide position, named as CBI‐GCH and CBI‐GACH , respectively. CBI‐GCH self‐assembles mainly through π‐stacking and van der Waals interactions in nonpolar methylcyclohexane to result in long 1D fibrillar stacks. The mechanism of supramolecular polymerization was probed by using chiroptical studies, which showed an isodesmic pathway for CBI‐GCH . The thermodynamic parameters that govern the self‐assembly are detailed. CBI‐GACH also shows similar self‐assembly behavior as its chiral counterpart. X‐ray diffraction studies of both molecules reveals a 2D hexagonal columnar arrangement. The coassembly of CBI‐GCH and CBI‐GACH shows chiral amplification (sergeant and soldiers experiment) with saturation at 30–50 % of the chiral derivative, which was further used to study the dynamics of the assembly. Thus, this study presents a rare report of chiral amplification in an isodesmic system.