核壳结构MoOx/C微球的制备及储锂性能

采用水热法合成了MoO_3/酚醛树脂前驱体,然后在空气中进行煅烧处理,成功制备了一种新型核壳MoOx/C微球。对材料的晶体结构、形貌和元素价态进行分析表明,该材料的主要成分是单斜相MoO_2、正交晶系MoO_3和碳。树脂在空气中的煅烧碳化将MoO_3/酚醛树脂前驱体中的六方晶系的MoO_3还原为单斜相MoO_2。其中少量的MoO_2会在空气中重新被氧化成正交晶系的MoO_3,形成了MoO_2/MoO_3异质结构。在这一系列反应的综合作用下,形成这种表面有裂纹的核壳MoOx/C微球复合材料。将该材料用作锂离子电池负极材料,表现出了循环稳定性高、倍率性能好等优异的电化学性能。在100 mA·g-1的电流密度下充放电循环100次之后,可逆容量达640.6 mAh·g-1。     

Hierarchical Fe3O4@TiO2 Yolk–Shell Microspheres with Enhanced Microwave‐Absorption Properties

A facile and efficient strategy for the synthesis of hierarchical yolk–shell microspheres with magnetic Fe₃O₄ cores and dielectric TiO₂ shells has been developed. Various Fe₃O₄@TiO₂ yolk–shell microspheres with different core sizes, interstitial void volumes, and shell thicknesses have been successfully synthesized by controlling the synthetic parameters. Moreover, the microwave absorption properties of these yolk–shell microspheres, such as the complex permittivity and permeability, were investigated. The electromagnetic data demonstrate that the as‐synthesized Fe₃O₄@TiO₂ yolk–shell microspheres exhibit significantly enhanced microwave absorption properties compared with pure Fe₃O₄ and our previously reported Fe₃O₄@TiO₂ core–shell microspheres, which may result from the unique yolk–shell structure with a large surface area and high porosity, as well as synergistic effects between the functional Fe₃O₄ cores and TiO₂ shells.     

Preparation of Yolk‐Shell and Filled Co9S8 Microspheres and Comparison of their Electrochemical Properties

In this study, we report the first preparation of phase‐pure Co₉S₈ yolk–shell microspheres in a facile two‐step process and their improved electrochemical properties. Yolk–shell Co₃O₄ precursor microspheres are initially obtained by spray pyrolysis and are subsequently transformed into Co₉S₈ yolk–shell microspheres by simple sulfidation in the presence of thiourea as a sulfur source at 350 °C under a reducing atmosphere. For comparison, filled Co₉S₈ microspheres were also prepared using the same procedure but in the absence of sucrose during the spray pyrolysis. The prepared yolk–shell Co₉S₈ microspheres exhibited a Brunauer–Emmett–Teller (BET) specific surface area of 18 m² g^?1 with a mean pore size of 16 nm. The yolk–shell Co₉S₈ microspheres have initial discharge and charge capacities of 1008 and 767 mA h g^?1 at a current density of 1000 mA g^?1, respectively, while the filled Co₉S₈ microspheres have initial discharge and charge capacities of 838 and 638 mA h g^?1, respectively. After 100 cycles, the discharge capacities of the yolk–shell and filled microspheres are 634 and 434 mA h g^?1, respectively, and the corresponding capacity retentions after the first cycle are 82 % and 66 %.     

Low temperature crystallization of a stable phase of microspherical MoO2

MoO₂ microspheres were synthesized by a facile wet chemical method using the molybdenum trioxide as an inorganic precursor and paraphenylendiamine as a reducing agent and also a template, via a hydrothermal way. The as prepared product was characterized by XRD, SEM, TEM, DTA–TG, and IR. It was found that this product was composed by MoO₂ nanoparticles encapsulated into the organic shell microspheres with diameters of 1–3 μm. The influence of the temperature on the crystallinity of the products was investigated. Optimal conditions founded were: reaction temperature: 220 °C, reaction time: 72 h and cooling time remains unchanged. The possible formation mechanism of MoO₂ microspheres was also discussed.     

Preparation of Thermosensitive Hollow Imprinted Microspheres via Combining Distillation Precipitation Polymerization and Thiol‐ene Click Chemistry

Hollow molecular imprinted polymer microspheres were prepared by distillation precipitation polymerization with (S)‐(+)‐ibuprofen (S‐IBF) as template molecule and acrylamide (AM) as functional monomer. Using the silicon dioxide (SiO₂, 180 nm) modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) as the template microspheres, the molecular imprinted shells were coated on successfully (SiO₂@MIPs). The thermosensitive SiO₂@MIPs‐PNIPAM core‐shell microspheres were subsequently prepared by grafting the PNIPAM chains (M_n=1.21×10⁴ g/mol, polydispersity index=1.30), which were prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization, on the surface of SiO₂@MIPs microspheres via the thiol‐ene click chemistry. The grafting density of PNIPAM brushes on the SiO₂@MIPs microspheres was about 0.18 chains/nm². After HF etching, the hollow imprinted microspheres were finally obtained. For thermosensitivity analysis, the phase transition temperatures of multifunctional nanoparticles were measured by DSL at 25°C and 45°C respectively, and the sizes of the microspheres changed by about 35 nm. The modified microspheres presented excellent controlled release property to S‐IBF, moreover about half amount of the adsorptions passed into acetonitrile‐water solution through the specific holes of imprinted shell at 25°C under vibration.     

Fabrication of ZIF‐8@SiO2 Core–Shell Microspheres as the Stationary Phase for High‐Performance Liquid Chromatography

The unique features of high porosity, shape selectivity, and multiple active sites make metal–organic frameworks (MOFs) promising as novel stationary phases for high‐performance liquid chromatography (HPLC). However, the wide particle size distribution and irregular shape of conventional MOFs lead to lower column efficiency of such MOF‐packed columns. Herein, the fabrication of monodisperse MOF@SiO₂ core–shell microspheres as the stationary phase for HPLC to overcome the above‐mentioned problems is reported. Zeolitic imidazolate framework 8 (ZIF‐8) was used as an example of MOFs due to its permanent porosity, uniform pore size, and exceptional chemical stability. Unique carboxyl‐modified silica spheres were used as the support to grow the ZIF‐8 shell. The fabricated monodisperse ZIF‐8@SiO₂ packed columns (5 cm long × 4.6 mm i.d.) show high column efficiency (23 000 plates m^?1 for bisphenol A) for the HPLC separation of endocrine‐disrupting chemicals (bisphenol A, β‐estradiol, and p‐(tert‐octyl)phenol) and pesticides (thiamethoxam, hexaflumuron, chlorantraniliprole, and pymetrozine) within 7 min with good relative standard deviations for 11 replicate separations of the analytes (0.01–0.39, 0.65–1.7, 0.70–1.3, and 0.17–0.91 % for retention time, peak area, peak height, and half peak width, respectively). The ZIF‐8@SiO₂ microspheres combine the advantages of the good column packing properties of the uniform monodisperse silica microspheres and the separation ability of the ZIF‐8 crystals.     

Core–Shell α‐Fe2O3@α‐MoO3 Nanorods as Lithium‐Ion Battery Anodes with Extremely High Capacity and Cyclability

α‐Fe₂O₃ nanoparticles are uniformly coated on the surface of α‐MoO₃ nanorods through a two‐step hydrothermal synthesis method. As the anode of a lithium‐ion battery, α‐Fe₂O₃@α‐MoO₃ core–shell nanorods exhibit extremely high lithium‐storage performance. At a rate of 0.1 C (10 h per half cycle), the reversible capacity of α‐Fe₂O₃@α‐MoO₃ core–shell nanorods is 1481 mA h g^?1 and a value of 1281 mA h g^?1 is retained after 50 cycles, which is much higher than that retained by bare α‐MoO₃ and α‐Fe₂O₃ and higher than traditional theoretical results. Such a good performance can be attributed to the synergistic effect between α‐Fe₂O₃ and α‐MoO₃, the small size effect, one‐dimensional nanostructures, short paths for lithium diffusion, and interface spaces. Our results reveal that core–shell nanocomposites have potential applications as high‐performance lithium‐ion batteries.     

Aligned MoOx/MoS2 Core–Shell Nanotubular Structures with a High Density of Reactive Sites Based on Self‐Ordered Anodic Molybdenum Oxide Nanotubes

The present work demonstrates the self‐organized formation of anodic molybdenum oxide nanotube arrays. The amorphous tubes can be crystallized to MoO₂ or MoO₃ and be converted fully or partially into molybdenum sulfide. Vertically aligned MoO_x/MoS₂ nanotubes can be formed when, under optimized conditions, defined MoS₂ sheets form in a layer by layer arrangement that provide a high density of reactive stacking misalignments (defects). These core–shell nanotube arrays consist of a conductive suboxide core and a functional high defect density MoS₂ coating. Such structures are highly promising for applications in electrocatalysis (hydrogen evolution) or ion insertion devices.     

Chitosan Bio‐Based Organic–Inorganic Hybrid Aerogel Microspheres

Recently, organic–inorganic hybrid materials have attracted tremendous attention thanks to their outstanding properties, their efficiency, versatility and their promising applications in a broad range of areas at the interface of chemistry and biology. This article deals with a new family of surface‐reactive organic–inorganic hybrid materials built from chitosan microspheres. The gelation of chitosan (a renewable amino carbohydrate obtained by deacetylation of chitin) by pH inversion affords highly dispersed fibrillar networks shaped as self‐standing microspheres. Nanocasting of sol–gel processable monomeric alkoxides inside these natural hydrocolloids and their subsequent CO₂ supercritical drying provide high‐surface‐area organic–inorganic hybrid materials. Examples including chitosan–SiO₂, chitosan–TiO₂, chitosan–redox‐clusters and chitosan–clay‐aerogel microspheres are described and discussed on the basis of their textural and structural properties, thermal and chemical stability and their performance in catalysis and adsorption.     

Template‐Free Synthesis of Core–Shell TiO2 Microspheres Covered with High‐Energy {116}‐Facet‐Exposed N‐Doped Nanosheets and Enhanced Photocatalytic Activity under Visible Light

Core–shell TiO₂ microspheres possess a unique structure and interesting properties, and therefore, they have received much attention. The high‐energy facets of TiO₂ also are being widely studied for the high photocatalytic activities they are associated with. However, the synthesis of the core–shell structure is difficult to achieve and requires multiple‐steps and/or is expensive. Hydrofluoric acid (HF), which is highly corrosive, is usually used in the controlling high‐energy facet production. Therefore, it is still a significant challenge to develop low‐temperature, template‐free, shape‐controlled, and relative green self‐assembly routes for the formation of core–shell‐structured TiO₂ microspheres with high‐energy facets. Here, we report a template‐ and hydrofluoric acid free solvothermal self‐assembly approach to synthesize core–shell TiO₂ microspheres covered with high‐energy {116}‐facet‐exposed nanosheets, an approach in which 1,4‐butanediamine plays a key role in the formation of nanosheets with exposed {116} facets and the doping of nitrogen in situ. In the structure, nanoparticle aggregates and nanosheets with {116} high‐energy facets exposed act as core and shell, respectively. The photocatalytic activity for degradation of 2,4,6‐tribromophenol and Rhodamine B under visible irradiation and UV/Vis irradiation has been examined, and improved photocatalytic activity under visible light owing to the hierarchical core–shell structure, {116}‐plane‐oriented nanosheets, in situ N doping, and large surface areas has been found.     

Core–Shell Hollow Microspheres of Magnetic Iron Oxide@Amorphous Calcium Phosphate: Synthesis Using Adenosine 5′‐Triphosphate and Application in pH‐Responsive Drug Delivery

Drug nanocarriers with magnetic targeting and pH‐responsive drug‐release behavior are promising for applications in controlled drug delivery. Magnetic iron oxides show excellent magnetism, but their application in drug delivery is limited by low drug‐loading capacity and poor control over drug release. Herein, core–shell hollow microspheres of magnetic iron oxide@amorphous calcium phosphate (MIO@ACP) were prepared and investigated as magnetic, pH‐responsive drug nanocarriers. Hollow microspheres of magnetic iron oxide (HMIOs) were prepared by etching solid MIO microspheres in hydrochloric acid/ethanol solution. After loading a drug into the HMIOs, the drug‐loaded HMIOs were coated with a protective layer of ACP by using adenosine 5′‐triphosphate (ATP) disodium salt (Na₂ATP) as stabilizer, and drug‐loaded core–shell hollow microspheres of MIO@ACP (HMIOs/drug/ACP) were obtained. The as‐prepared HMIOs/drug/ACP drug‐delivery system exhibits superparamagnetism and pH‐responsive drug‐release behavior. In a medium with pH 7.4, drug release was slow, but it was significantly accelerated at pH 4.5 due to dissolution of the ACP shell. Docetaxel‐loaded core–shell hollow microspheres of MIO@ACP exhibited high anticancer activity.     

Facile Access to Hydroxy‐Functional Core–Shell Microspheres via Grafting of Ethylene Oxide by Anionic Ring‐Opening Polymerization

We present a facile access route to hydroxy‐functional narrow disperse microspheres of well‐defined grafting density (GD). Ethylene oxide has been grafted from highly crosslinked poly(divinyl benzene) microspheres by anionic ring‐opening polymerization using sec‐butyllithium as activator together with the phosphazene base t‐BuP₄. Initially, core microspheres have been prepared by precipitation polymerization utilizing divinyl benzene (DVB, 80 wt.‐%). The grafting of poly(ethylene oxide) (PEO) from the surface resulted in the formation of functional core–shell microspheres with hydroxy‐terminal end groups. The number average particle diameter of the grafted microspheres was 3.6 µm and the particle weight increased by 5.7%. The microspheres were characterized by SEM, FT‐IR spectroscopy, elemental analysis, and fluorescence microscopy. The surface GD (determined via two methods) was 1.65 ± 0.06 and 2.09 ± 0.08 chains · nm⁻², respectively.

     

One‐pot synthesis of composite microspheres with core‐shell structure

One‐pot synthesis of thermoresponsive magnetic composite microspheres with a poly(N‐isopropylacrylamide) (PNIPAM) shell and a Fe₃O₄ core is demonstrated. Temperature sensitivity of PNIPAM was adopted to design the novel synthesis pathway. The as‐prepared composite microspheres have an obvious core‐shell structure with a mean size of approximately 250 nm. The Fe₃O₄ core is approximately 5 nm and the thickness of the PNIPAM shell is approximately 10 nm. The content of Fe₃O₄ in the composite microspheres can be controlled by this method. The composite microspheres experience a swelling and shrinking process in water by adjusting the temperature below and above the lower critical solution temperature (LCST) around 32 °C. These microspheres also show fine response to an external magnetic field. This work presents a platform to synthesize organic/inorganic composite microspheres in a facile and efficient approach. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2702–2708     

Preparation of hollow layered MoO3 microspheres through a resin template approach

Hollow layered MoO₃ microspheres were obtained by the adsorption of 12-molybdodiphosphate onto the surface of a spherical anion exchange resin followed by calcination of the resulting 12-molybdodiphosphate-resin composite. The conductivity of the sphere shell can be improved by intercalating polyaniline between layers of MoO₃ particles in the sphere shell.     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Magnetic Silica‐Coated Sub‐Microspheres with Immobilized Metal Ions for the Selective Removal of Bovine Hemoglobin from Bovine Blood

Magnetic silica‐coated magnetite (Fe₃O₄) sub‐microspheres with immobilized metal‐affinity ligands are prepared for protein adsorption. First, magnetite sub‐microspheres were synthesized by a hydrothermal method. Then silica was coated on the surface of Fe₃O₄ particles using a sol–gel method to obtain magnetic silica sub‐microspheres with core‐shell morphology. Next, the trichloro(4‐chloromethylphenyl) silane was immobilized on them, reacted with iminodiacetic acid (IDA), and charged with Cu²⁺. The obtained magnetic silica sub‐microspheres with immobilized Cu²⁺ were applied for the absorption of bovine hemoglobin (BHb) and the removal of BHb from bovine blood. The size, morphology, and magnetic properties of the resulting magnetic micro(nano) spheres were investigated by using scanning microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), and a vibrating sample magnetometer (VSM). The measurements showed that the magnetic sub‐microspheres are spherical in shape, very uniform in size with a core‐shell, and are almost superparamagnetic. The saturation magnetization of silica‐coated magnetite (Fe₃O₄) sub‐microspheres reached about 33 emu g^?1. Protein adsorption results showed that the sub‐microspheres had a high adsorption capacity for BHb (418.6 mg g^?1), low nonspecific adsorption, and good removal of BHb from bovine blood. This opens a novel route for future applications in removing abundant proteins in proteomic analysis.     

A Facile Method for Preparing Porous,Optically Active,Magnetic Fe3O4@poly(N‐acryloyl‐leucine) Inverse Core/Shell Composite Microspheres

The first synthesis of porous, optically active, magnetic Fe₃O₄@poly(N‐acryloyl‐leucine) inverse core/shell composite microspheres is reported, in which the core is constructed of chiral polymer and the shell is constructed of Fe₃O₄ NPs. The microspheres integrate three significant concepts, “porosity”, “chirality”, and “magneticity”, in one single microspheric entity. The microspheres consist of Fe₃O₄ nanoparticles and porous optically active microspheres, and thus combine the advantages of both magnetic nanoparticles and porous optically active microspheres. The pore size and specific surface area of the microspheres are characterized by N₂ adsorption, from which it is found that the composite microspheres possess a desirable porous structure. Circular dichroism and UV‐vis absorption spectroscopy measurements demonstrate that the microspheres exhibit the expected optical activity. The microspheres also have high saturation magnetization of 14.7 emu g^–1 and rapid magnetic responsivity. After further optimization, these novel microspheres may potentially find applications in areas such as asymmetric catalysis, chiral adsorption, etc.

     

Enhanced sulfur‐resistant methanation performance over MoO3–ZrO2 catalyst prepared by solution combustion method

Sulfur‐resistant methanation of syngas was studied over MoO₃–ZrO₂ catalysts at 400°C. The MoO₃–ZrO₂ solid‐solution catalysts were prepared using the solution combustion method by varying MoO₃ content and temperature. The 15MoO₃–ZrO₂ catalyst achieved the highest methanation performance with CO conversion up to 80% at 400°C. The structure of ZrO₂ and dispersed MoO₃ species was characterized using X‐ray diffraction and transmission electron microscopy. The energy‐dispersive spectrum of the 15MoO₃–ZrO₂ catalyst showed that the solution combustion method gave well‐dispersed MoO₃ particles on the surface of ZrO₂. The structure of the catalysts depends on the Mo surface density. It was observed that in the 15MoO₃–ZrO₂ catalyst the Mo surface density of 4.2 Mo atoms nm^?2 approaches the theoretical monolayer capacity of 5 Mo atoms nm^?2. The addition of a small amount of MoO₃ to ZrO₂ led to higher tetragonal content of ZrO₂ along with a reduction of particle size. This leads to an efficient catalyst for the low‐temperature CO methanation process.     

Yolk–shell microspheres assembled from Preyssler‐type NaP5W30O11014− polyoxometalate and MIL‐101(Cr) metal–organic framework: A new inorganic–organic nanohybrid for fast and selective removal of cationic organic dyes from aqueous media

Novel inorganic–organic yolk–shell microspheres based on Preyssler‐type NaP₅W₃₀O₁₁₀^14? polyoxometalate and MIL‐101(Cr) metal–organic framework (P₅W₃₀/MIL‐101(Cr)) were synthesized by reaction of K_12.5Na_1.5[NaP₅W₃₀O₁₁₀], Cr(NO₃)₃·9H₂O and terephthalic acid under hydrothermal conditions at 200°C for 24 h. The as‐prepared yolk–shell microspheres were fully characterized using various techniques. All analyses confirmed the incorporation of the Preyssler‐type NaP₅W₃₀O₁₁₀^14? polyoxometalate into the three‐dimensional porous MIL‐101(Cr) metal–organic framework. The results revealed that P₅W₃₀/MIL‐101(Cr) demonstrated rapid adsorption of cationic methylene blue (MB) and rhodamine B (RhB) with ultrahigh efficiency and capacity, as well as achieving rapid and highly selective adsorption of MB from MB/MO (MO = methyl orange), MB/RhB and MB/RhB/MO mixtures. The P₅W₃₀/MIL‐101(Cr) adsorbent not only exhibited a high adsorption capacity of 212 mg g^?1, but also could quickly remove 100% of MB from a dye solution of 50 mg l^?1 within 8 min. The effects of some key parameters such as adsorbent dosage, initial dye concentration and initial pH on dye adsorption were investigated in detail. The equilibrium adsorption data were better fitted by the Langmuir isotherm. The adsorption kinetics was well modelled using a pseudo‐second‐order model. Also, the inorganic–organic hybrid yolk–shell microspheres could be easily separated from the reaction system and reused up to four times without any change in structure or adsorption ability. The stability and robustness of the adsorbent were confirmed using various techniques.     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).