Conjugated Oligothiophene Derivatives Based on Bithiophene with Unsaturated Bonds as Building Blocks for Solution‐Processed Bulk Heterojunction Organic Solar Cells

A new building block ATVTA that uses stiff carbon–carbon triple bonds (A) on 1,2‐di(2‐thienyl)‐ethene (TVT) has been developed. Oligothiophene derivatives S‐01 with a TVT unit, S‐02 with a 5,5′‐diethynyl‐2,2′‐dithienyl (AT2) unit and S‐03 with ATVTA were synthesized to compare their effects in a systematic study. Due to the better π‐conjugation extension of the TVT unit, S‐01 exhibits the most red‐shifted absorption profile among them, whereas S‐02 possesses the deepest HOMO level. While the HOMO level of S‐03 is down‐shifted by 0.02 eV relative to that of S‐01 , the alkyne linkages can effectively down‐shift the HOMO level. By replacing the terminal units of S‐03 with stronger electron acceptors, S‐04 and S‐05 exhibited broader absorption profiles and lower HOMO levels than those of S‐03 . Organic solar cells based on these molecules were fabricated and an S‐03 :PC₆₀BM (1:1, w/w) based device afforded the highest V_oc value of 0.96 V and a power conversion efficiency (PCE) of 2.19 %.     

Diketopyrrolopyrrole‐Based and Tetracyano‐Bridged Small Molecules for Bulk Heterojunction Organic Solar Cells

Research on bulk heterojunction organic solar cells has rapidly grown over the past two decades, and device performance has reached power conversion efficiencies over 13 %. In this focus review, we highlight design strategies used for the development of diketopyrrolopyrrole‐ and tetracyano‐based molecular donors. We also describe how tetracyano‐bridged non‐fullerene acceptors can be developed by a click‐type [2+2]‐cycloaddition–electrocyclic ring‐opening reaction of acetylene‐bridged small molecules with tetracyanoethylene by simple modification.     

Toward the Realization of A Practical Diketopyrrolopyrrole‐Based Small Molecule for Improved Efficiency in Ternary BHJ Solar Cells

An easily accessible DPP‐based small molecule ( DMPA‐DTDPP ) has been synthesized by a simple and efficient route. The resulting molecule, when incorporated into a P3HT:PCBM‐based BHJ solar cell, is found to significantly improve the efficiency. The utility of DMPA‐DTDPP as an additive yields an increase in the short circuit current density (J_sc) because DMPA‐DTDPP serves as an energy funnel for P3HT excitons at the P3HT:PCBM interfaces, resulting in an improved overall power conversion efficiency, compared to the P3HT:PCBM control device. Considering the trouble‐free and cost effective synthesis of DMPA‐DTDPP , it may prove very useful in high‐performance solar cells.     

Polymer Acceptor Based on B←N Units with Enhanced Electron Mobility for Efficient All‐Polymer Solar Cells

We demonstrate that polymer electron acceptors with excellent all‐polymer solar‐cell (all‐PSC) device performance can be developed from polymer electron donors by using B←N units. By alleviating the steric hindrance effect of the bulky pendant moieties on the conjugated polymers that contain B←N units, the π–π stacking distance of polymer backbones is decreased and the electron mobility is consequently enhanced by nearly two orders of magnitude. As a result, the power conversion efficiency of all‐PSCs with the polymer acting as the electron acceptor is greatly improved from 0.12 % to 5.04 %. This PCE value is comparable to that of the best all‐PSCs with state‐of‐the‐art polymer acceptors.     

Efficient Synthesis,Structure, and Complexation Studies of Electron‐Donating Thiacalix[n]dithienothiophene

A series of thiacalix[n]dithiothiophenes (n=4–10) was prepared by a facile method and X‐ray analysis was used to determine the molecular structures of square‐ (4‐mer) and pentagonal‐shaped macrocycles (5‐mer). In the cyclic voltammograms, reversible multielectron redox processes, which are due to electronic delocalization, were observed at low oxidation potentials. The cyclic 4‐mer acted as a “Janus‐head” cavitand for two C₆₀ molecules, whereas the 5‐ and 6‐mer formed stable 1:1 complexes with C₆₀ .     

Isoindigo‐3,4‐Difluorothiophene Polymer Acceptors Yield “All‐Polymer” Bulk‐Heterojunction Solar Cells with over 7 % Efficiency

Poly(isoindigo‐alt‐3,4‐difluorothiophene) (PIID[2F]T) analogues used as “polymer acceptors” in bulk‐heterojunction (BHJ) solar cells achieve >7 % efficiency when used in conjunction with the polymer donor PBFTAZ (model system; copolymer of benzo[1,2‐b:4,5‐b′]dithiophene and 5,6‐difluorobenzotriazole). Considering that most efficient polymer‐acceptor alternatives to fullerenes (e.g. PC₆₁BM or its C₇₁ derivative) are based on perylenediimide or naphthalenediimide motifs thus far, branched alkyl‐substituted PIID[2F]T polymers are particularly promising non‐fullerene candidates for “all‐polymer” BHJ solar cells.     

A Novel BODIPY‐Based Low‐Band‐Gap Small‐Molecule Acceptor for Efficient Non‐fullerene Polymer Solar Cells

We report herein an efficient A¹‐C≡C‐A²‐C≡C‐A¹ type small‐molecule 4,4'‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐ indacene (BODIPY) acceptor (A¹=BODIPY and A²=diketopyrrolopyrrole (DPP)) by following the A‐to‐A excited electron delocalization via the BODIPY meso ‐position, the inherent directionality for the excited electron delocalization. The lowest unoccupied molecular orbital (LUMO) delocalizes across over whole the two flanking A¹ and the central A², and the highest occupied molecular orbital (HOMO) localizes dominantly on the ‐C≡C‐DPP‐C≡C‐ segment. The excited electron upon light excitation of the DPP segment delocalizes over both the BODIPY and DPP segments. The acceptor in chloroform shows an unprecedented plateau‐like broad absorption between 550 and 700 nm with a large FWHM value of 195 nm. Upon transition into solid film, the acceptor shows absorption in the whole near ultraviolet‐visible‐near infrared wavelength region (300‐830 nm) with a low band gap of 1.5 eV and a maximum absorptivity of 0.85×10⁵ cm^‐1. Introduction of the ethynyl spacer between the A¹ and A² and the close BODIPY‐to‐DPP LUMO energy levels are crucial for the excited π−electron delocalization across over whole the conjugation backbone. A power conversion efficiency of 6.60% was obtained from the ternary non‐fullerene solar cell with PTB7‐Th:p ‐DTS(FBTTh₂)₂ (0.5 : 0.5) as the donor materials, which is the highest value among the non‐fullerene organic solar cells with BODIPY as the electron acceptor material.     

Synthesis of Long,Palladium End‐Capped Polyynes through the Use of Asymmetric 1‐Iodopolyynes

The synthesis of a unique series of long, asymmetric 1‐iodopolyynes ( 1 ‐C_nI and 2 ‐C_nI) with the sp‐hybridized carbon chain up to a decapentayne is reported. These compounds were then used as substrates in reactions with Pd(PPh₃)₄ leading to another series of palladium end‐capped polyynes, which were unstable in solution. Organometallic octatetraynes 1 ‐C₈[Pd]I, 2 ‐C₈[Pd]I, and decapentayne 1 ‐C₁₀[Pd]I are palladium end‐capped polyyne compounds with the longest carbon chains reported so far. All the complexes as well as their organic precursors were fully characterized by NMR, HRMS(ESI), IR, TGA‐DTA, and UV/Vis techniques, and the X‐ray crystal structures of two silyl‐protected precursors and one palladium complex are presented. The synthetic approach for palladium species is envisioned as a general route for the synthesis of labile organometallic polyynes.     

Hexaazatrinaphthylene Derivatives: Efficient Electron‐Transporting Materials with Tunable Energy Levels for Inverted Perovskite Solar Cells

Hexaazatrinaphthylene (HATNA) derivatives have been successfully shown to function as efficient electron‐transporting materials (ETMs) for perovskite solar cells (PVSCs). The cells demonstrate a superior power conversion efficiency (PCE) of 17.6 % with negligible hysteresis. This study provides one of the first nonfullerene small‐molecule‐based ETMs for high‐performance p–i–n PVSCs.     

Bis(5,7‐dimethyl‐8‐hydroxyquinolinato)platinum(II) Complex for Efficient Organic Heterojunction Solar Cells

Organic photovoltaic (OPV) cells using metal(II) (Pt, Pd, Cu, and Ni) chelates of 8‐hydroxyquinoline (Hq) or 5,7‐dimethyl‐8‐hydroxy‐quinoline (HMe₂q) as an electron donor were fabricated by vacuum deposition. The bis(5,7‐dimethyl‐8‐hydroxyquinolinato)platinum(II) [Pt(Me₂q)₂]‐based OPVs showed the best performance with an open voltage (V_OC) of 0.42 V, a short circuit current density (J_SC) of 14.8 mA cm^?2, and a maximum power conversion efficiency (η_P) of 2.4 %. The X‐ray single‐crystal structures together with the grazing incidence X‐ray diffraction (GIXRD) data of thin film samples reveal that the peripheral methyl substituent(s) and platinum(II) ion are essential for the high degree of film crystallinity resulting in improved performance of the as‐fabricated field‐effect transistors (FETs) and OPV cells.     

13.34 % Efficiency Non‐Fullerene All‐Small‐Molecule Organic Solar Cells Enabled by Modulating the Crystallinity of Donors via a Fluorination Strategy

Non‐fullerene all‐small‐molecule organic solar cells (NFSM‐OSCs) have shown potential as OSCs, owing to their high purity, easy synthesis and good reproducibility. However, challenges in the modulation of phase separation morphology have limited their development. Herein, two novel small molecular donors, BTEC‐1F and BTEC‐2F, derived from the small molecule DCAO3TBDTT, are synthesized. Using Y6 as the acceptor, devices based on non‐fluorinated DCAO3TBDTT showed an open circuit voltage (V_oc) of 0.804 V and a power conversion efficiency (PCE) of 10.64 %. Mono‐fluorinated BTEC‐1F showed an increased V_oc of 0.870 V and a PCE of 11.33 %. The fill factor (FF) of di‐fluorinated BTEC‐2F‐based NFSM‐OSC was improved to 72.35 % resulting in a PCE of 13.34 %, which is higher than that of BTEC‐1F (61.35 %) and DCAO3TBDTT (60.95 %). To our knowledge, this is the highest PCE for NFSM‐OSCs. BTEC‐2F had a more compact molecular stacking and a lower crystallinity which enhanced phase separation and carrier transport.     

High‐Performance Dipolar Organic Dyes with an Electron‐Deficient Diphenylquinoxaline Moiety in the π‐Conjugation Framework for Dye‐Sensitized Solar Cells

We report here the synthesis and electrochemical and photophysical properties of a series of easily prepared dipolar organic dyes and their application in dye‐sensitized solar cells (DSSCs). For the six organic dyes, the molecular structures comprised a triphenylamine group as an electron donor, a cyanoacrylic acid as an electron acceptor, and an electron‐deficient diphenylquinoxaline moiety integrated in the π‐conjugated spacer between the electron donor and acceptor moieties. The incorporation of the electron‐deficient diphenylquinoxaline moiety effectively reduces the energy gap of the dyes and broadly extends the spectral coverage. DSSCs based on dye 6 produced the best overall cell performance of 7.35 %, which translates to approximately 79 % of the intrinsic efficiency of the DSSCs based on the standard N719 dye under identical experimental conditions. The high performance of DSSCs based on dye 6 among the six dyes explored is attributed to the combined effects of high dye loading on a TiO₂ surface, rapid dye regeneration, and effective retardation of charge recombination.     

Synthesis and Characterization of Organic Dyes with Various Electron‐Accepting Substituents for p‐Type Dye‐Sensitized Solar Cells

Four new donor‐π‐acceptor dyes differing in their acceptor group have been synthesized and employed as model systems to study the influence of the acceptor groups on the photophysical properties and in NiO‐based p‐type dye‐sensitized solar cells. UV/Vis absorption spectra showed a broad range of absorption coverage with maxima between 331 and 653 nm. Redox potentials as well as HOMO and LUMO energies of the dyes were determined from cyclic voltammetry measurements and evaluated concerning their potential use as sensitizers in p‐type dye‐sensitized solar cells (p‐DSCs). Quantum‐chemical density functional theory calculations gave further insight into the frontier orbital distributions, which are relevant for the electronic processes in p‐DSCs. In p‐DSCs using an iodide/triiodide‐based electrolyte, the polycyclic 9,10‐dicyano‐acenaphtho[1,2‐b]quinoxaline (DCANQ) acceptor‐containing dye gave the highest power conversion efficiency of 0.08 %, which is comparable to that obtained with the perylenemonoimide (PMI)‐containing dye. Interestingly, devices containing the DCANQ‐based dye achieve a higher V_OC of 163 mV compared to 158 mV for the PMI‐containing dye. The result was further confirmed by impedance spectroscopic analysis showing higher recombination resistance and thus a lower recombination rate for devices containing the DCANQ dye than for PMI dye‐based devices. However, the use of the strong electron‐accepting tricyanofurane (TCF) group played a negative role in the device performance, yielding an efficiency of only 0.01 % due to a low‐lying LUMO energy level, thus resulting in an insufficient driving force for efficient dye regeneration. The results demonstrate that a careful molecular design with a proper choice of the acceptor unit is essential for development of sensitizers for p‐DSCs.     

A Three‐dimensional Non‐fullerene Small Molecule Acceptor for Solution‐processed Organic Solar Cells

An acceptor‐donor‐acceptor (A‐D‐A) three‐dimensional (3D ) small molecule acceptor (SFTTIC ), using spirobifluorene as the core unit linking with four thieno[3,2‐b ]thiophenes (TT ) and end‐capped with 2‐(3‐oxo ‐2,3‐dihydro‐1H ‐inden‐1‐ylidene)malononitrile (INCN ) was developed for solution processed organic solar cells. SFTTIC has a high absorption coefficient up to 3.12 × 10⁵ mol⁻¹•cm⁻¹, good thermal stability and appropriate energy levels. The optimized power conversion efficiency (PCE ) of 5.66% and 4.65% was achieved for the devices with PBDB ‐T:SFTTIC and PTB7 ‐Th:SFTTIC , respectively.     

Near Infrared Organic Semiconducting Materials for Bulk Heterojunction and Dye‐Sensitized Solar Cells

Dye sensitized solar cells (DSSCs) and bulk heterojunction (BHJ) solar cells have been the subject of intensive academic interest over the past two decades, and significant commercial effort has been directed towards this area with the vison of developing the next generation of low cost solar cells. Materials development has played a vital role in the dramatic improvement of both DSSC and BHJ solar cell performance in the recent years. Organic conjugated polymers and small molecules that absorb solar light in the visible and near infrared (NIR) regions represent a class of emering materials and show a great potential for the use of different optoelectronic devices such as DSSCs and BHJ solar cells. This account describes the emering class of near infrared (NIR) organic polymers and small molecules having donor and acceptors units, and explores their potential applications in the DSSCs and BHJ solar cells.