Nitrogen‐Doped Graphitic Porous Carbon Nanosheets Derived from In Situ Formed g‐C3N4 Templates for the Oxygen Reduction Reaction

Heteroatom‐doped carbon materials have been considered as potential substitutes for Pt‐based electrocatalysts for the oxygen reduction reaction (ORR) in alkaline fuel cells. Here we report the synthesis of oxygen‐containing nitrogen‐doped carbon (ONC) nanosheets through the carbonization of a mixture that contained glucose and dicyandiamide (DCDA). In situ formed graphitic carbon nitride (g‐C₃N₄) derived from DCDA provided a nitrogen‐rich template, thereby facilitating the formation of ONC nanosheets. The resultant ONC materials with high nitrogen content, high specific surface areas, and highly mesoporous total volume displayed excellent electrochemical performance, including a similar ORR onset potential, half‐potential, a higher diffusion‐limited current, and excellent tolerance to methanol than that of the commercial Pt/C catalyst, respectively. Moreover, the ONC‐850 nanosheet displayed high long‐term durability even after 1000 cycles as well as a high electron transfer number of 3.92 (4.0 for Pt/C). Additionally, this work provides deeper insight into these materials and a versatile strategy for the synthesis of cost‐effective 2D N‐doped carbon electrocatalysts.     

Nitrogen‐Doped Carbon Nanosheets with Size‐Defined Mesopores as Highly Efficient Metal‐Free Catalyst for the Oxygen Reduction Reaction

Nitrogen‐doped carbon nanosheets (NDCN) with size‐defined mesopores are reported as highly efficient metal‐free catalyst for the oxygen reduction reaction (ORR). A uniform and tunable mesoporous structure of NDCN is prepared using a templating approach. Such controlled mesoporous structure in the NDCN exerts an essential influence on the electrocatalytic performance in both alkaline and acidic media for the ORR. The NDCN catalyst with a pore diameter of 22 nm exhibits a more positive ORR onset potential than that of Pt/C (?0.01 V vs. ?0.02 V) and a high diffusion‐limited current approaching that of Pt/C (5.45 vs. 5.78 mA cm^?2) in alkaline medium. Moreover, the catalyst shows pronounced electrocatalytic activity and long‐term stability towards the ORR under acidic conditions. The unique planar mesoporous shells of the NDCN provide exposed highly electroactive and stable catalytic sites, which boost the electrocatalytic activity of metal‐free NDCN catalyst.     

Low‐Temperature Solution Synthesis of Few‐Layer 1T ′‐MoTe2 Nanostructures Exhibiting Lattice Compression

Molybdenum ditelluride, MoTe₂, is emerging as an important transition‐metal dichalcogenide (TMD) material because of its favorable properties relative to other TMDs. The 1T ′ polymorph of MoTe₂ is particularly interesting because it is semimetallic with bands that overlap near the Fermi level, but semiconducting 2H‐MoTe₂ is more stable and therefore more accessible synthetically. Metastable 1T ′‐MoTe₂ forms directly in solution at 300 °C as uniform colloidal nanostructures that consist of few‐layer nanosheets, which appear to exhibit an approx. 1 % lateral lattice compression relative to the bulk analogue. Density functional theory calculations suggest that small grain sizes and polycrystallinity stabilize the 1T ′ phase in the MoTe₂ nanostructures and suppress its transformation back to the more stable 2H polymorph through grain boundary pinning. Raman spectra of the 1T ′‐MoTe₂ nanostructures exhibit a laser energy dependence, which could be caused by electronic transitions.     

Excellent Performance of Few‐Layer Borocarbonitrides as Anode Materials in Lithium‐Ion Batteries

Borocarbonitrides (B_xC_yN_z) with a graphene‐like structure exhibit a remarkable high lithium cyclability and current rate capability. The electrochemical performance of the B_xC_yN_z materials, synthesized by using a simple solid‐state synthesis route based on urea, was strongly dependent on the composition and surface area. Among the three compositions studied, the carbon‐rich compound B_0.15C_0.73N_0.12 with the highest surface area showed an exceptional stability (over 100 cycles) and rate capability over widely varying current density values (0.05–1 A g^?1). B_0.15C_0.73N_0.12 has a very high specific capacity of 710 mA h g^?1 at 0.05 A g^?1. With the inclusion of a suitable additive in the electrolyte, the specific capacity improved drastically, recording an impressive value of nearly 900 mA h g^?1 at 0.05 A g^?1. It is believed that the solid–electrolyte interphase (SEI) layer at the interface of B_xC_yN_z and electrolyte also plays a crucial role in the performance of the B_xC_yN_z .     

Few‐Layer Nanosheets of n‐Type SnSe2

Layered p‐block metal chalcogenides are renowned for thermoelectric energy conversion due to their low thermal conductivity caused by bonding asymmetry and anharmonicity. Recently, single crystalline layered SnSe has created sensation in thermoelectrics due to its ultralow thermal conductivity and high thermoelectric figure of merit. Tin diselenide (SnSe₂), an additional layered compound belonging to the Sn‐Se phase diagram, possesses a CdI₂‐type structure. However, synthesis of pure‐phase bulk SnSe₂ by a conventional solid‐state route is still remains challenging. A simple solution‐based low‐temperature synthesis is presented of ultrathin (3–5 nm) few layers (4–6 layers) nanosheets of Cl‐doped SnSe₂, which possess n‐type carrier concentration of 2×10¹⁸ cm^?3 with carrier mobility of about 30 cm² V^?1 s^?1 at room temperature. SnSe₂ has a band gap of about 1.6 eV and semiconducting electronic transport in the 300–630 K range. An ultralow thermal conductivity of about 0.67 Wm^?1 K^?1 was achieved at room temperature in a hot‐pressed dense pellet of Cl‐doped SnSe₂ nanosheets due to the anisotropic layered structure, which gives rise to effective phonon scattering.     

Nitrogen‐Rich Manganese Oxynitrides with Enhanced Catalytic Activity in the Oxygen Reduction Reaction

The catalytic activity of manganese oxynitrides in the oxygen reduction reaction (ORR) was investigated in alkaline solutions to clarify the effect of the incorporated nitrogen atoms on the ORR activity. These oxynitrides, with rock‐salt‐like structures with different nitrogen contents, were synthesized by reacting MnO, Mn₂O₃, or MnO₂ with molten NaNH₂ at 240–280 °C. The anion contents and the Mn valence states were determined by combustion analysis, powder X‐ray diffraction, and X‐ray absorption near‐edge structure analysis. An increase in the nitrogen content of rock‐salt‐based manganese oxynitrides increases the valence of the manganese ions and reinforces the catalytic activity for the ORR in 1 m KOH solution. Nearly single‐electron occupancy of the antibonding e_g states and highly covalent Mn?N bonding thus enhance the ORR activity of nitrogen‐rich manganese oxynitrides.     

Composition‐Tailored 2 D Mn1−xRuxO2 Nanosheets and Their Reassembled Nanocomposites: Improvement of Electrode Performance upon Ru Substitution

Composition‐tailored Mn_1?xRu_xO₂ 2 D nanosheets and their reassembled nanocomposites with mesoporous stacking structure are synthesized by a soft‐chemical exfoliation reaction and the subsequent reassembling of the exfoliated nanosheets with Li⁺ cations, respectively. The tailoring of the chemical compositions of the exfoliated Mn_1?xRu_xO₂ 2 D nanosheets and their lithiated nanocomposites can be achieved by adopting the Ru‐substituted layered manganese oxides as host materials for exfoliation reaction. Upon the exfoliation–reassembling process, the substituted ruthenium ions remain stabilized in the layered Mn_1?xRu_xO₂ lattice with mixed Ru³⁺/Ru⁴⁺ oxidation state. The reassembled Li–Mn_1?xRu_xO₂ nanocomposites show promising pseudocapacitance performance with large specific capacitances of approximately 330 F g^?1 for the second cycle and approximately 360 F g^?1 for the 500th cycle and excellent cyclability, which are superior to those of the unsubstituted Li–MnO₂ homologue and many other MnO₂‐based materials. Electrochemical impedance spectroscopy analysis provides strong evidence for the enhancement of the electrical conductivity of 2 D nanostructured manganese oxide upon Ru substitution, which is mainly responsible for the excellent electrode performance of Li–Mn_1?xRu_xO₂ nanocomposites. The results underscore the powerful role of the composition‐controllable metal oxide 2 D nanosheets as building blocks for exploring efficient electrode materials.     

Heat‐Treated Aerogel as a Catalyst for the Oxygen Reduction Reaction

Aerogels are fascinating materials that can be used for a wide range of applications, one of which is electrocatalysis of the important oxygen reduction reaction. In their inorganic form, aerogels can have ultrahigh catalytic site density, high surface area, and tunable physical properties and chemical structures—important features in heterogeneous catalysis. Herein, we report on the synthesis and electrocatalytic properties of an iron–porphyrin aerogel. 5,10,15,20‐(Tetra‐4‐aminophenyl)porphyrin (H₂TAPP) and Fe^II were used as building blocks of the aerogel, which was later heat‐treated at 600 °C to enhance electronic conductivity and catalytic activity, while preserving its macrostructure. The resulting material has a very high concentration of atomically dispersed catalytic sites (9.7×10²⁰ sites g^?1) capable of catalyzing the oxygen reduction reaction in alkaline solution (E_onset=0.92 V vs. RHE, TOF=0.25 e^? site^?1 s^?1 at 0.80 V vs. RHE).     

Exfoliated Single Layers of Layered Cobalt Hydroxide for Ultrafine Co3O4 Nanoparticles on Graphene Nanosheets as an Efficient Electrocatalyst for Oxygen Reduction

A highly effective way to produce an oxygen reduction electrocatalyst was developed through the self-assembly of exfoliated single layers of cobalt hydroxide (Co(OH)₂) and graphene oxide (GO). These 2D materials have complete contact with one another because of their physical flexibility and the electrostatic attraction between negatively charged GO and positively charged Co(OH)₂ layers. The strong coupling induces transformation of the Co(OH)₂ single layer into a discrete nanocrystal of spinel Co₃O₄ with an average size of 8 nm on reduced GO (RGO) during calcination, which could not be obtained with bulk-layered cobalt hydroxide because of its rapid layer collapse. The ultrafine Co₃O₄/RGO hybrid exhibited not only comparable performance in the oxygen reduction reaction but also higher durability compared with the commercial 20 wt % Pt/C catalyst.     

Sulfur‐Doped Graphene Derived from Cycled Lithium–Sulfur Batteries as a Metal‐Free Electrocatalyst for the Oxygen Reduction Reaction

Heteroatom‐doped carbon materials have been extensively investigated as metal‐free electrocatalysts to replace commercial Pt/C catalysts in oxygen reduction reactions in fuel cells and Li–air batteries. However, the synthesis of such materials usually involves high temperature or complicated equipment. Graphene‐based sulfur composites have been recently developed to prolong the cycling life of Li–S batteries, one of the most attractive energy‐storage devices. Given the high cost of graphene, there is significant demand to recycle and reuse graphene from Li–S batteries. Herein, we report a green and cost‐effective method to prepare sulfur‐doped graphene, achieved by the continuous charge/discharge cycling of graphene–sulfur composites in Li–S batteries. This material was used as a metal‐free electrocatalyst for the oxygen reduction reaction and shows better electrocatalytic activity than pristine graphene and better methanol tolerance durability than Pt/C.     

Generalized Low‐Temperature Fabrication of Scalable Multi‐Type Two‐Dimensional Nanosheets with a Green Soft Template

Two‐dimensional nanosheets with high specific surface areas and fascinating physical and chemical properties have attracted tremendous interests because of their promising potentials in both fundamental research and practical applications. However, the problem of developing a universal strategy with a facile and cost‐effective synthesis process for multi‐type ultrathin 2 D nanostructures remains unresolved. Herein, we report a generalized low‐temperature fabrication of scalable multi‐type 2 D nanosheets including metal hydroxides (such as Ni(OH)₂, Co(OH)₂, Cd(OH)₂, and Mg(OH)₂), metal oxides (such as ZnO and Mn₃O₄), and layered mixed transition‐metal hydroxides (Ni‐Co LDH, Ni‐Fe LDH, Co‐Fe LDH, and Ni‐Co‐Fe layered ternary hydroxides) through the rational employment of a green soft‐template. The synthesized crystalline inorganic nanosheets possess confined thickness, resulting in ultrahigh surface atom ratios and chemically reactive facets. Upon evaluation as electrode materials for pseudocapacitors, the Ni‐Co LDH nanosheets exhibit a high specific capacitance of 1087 F g^?1 at a current density of 1 A g^?1, and excellent stability, with 103 % retention after 500 cycles. This strategy is facile and scalable for the production of high‐quality ultrathin crystalline inorganic nanosheets, with the possibility of extension to the preparation of other complex nanosheets.     

A New Layered Photocathode with Porous NiO Nanosheets: An Effective Candidate for p‐Type Dye‐Sensitized Solar Cells

Herein, with the purpose of improving the efficiency of p‐type dye‐sensitized solar cells (DSSCs), a new layered photocathode (LP) is fabricated from irregular overlapping wrinkled porous NiO nanosheets. The LP was sensitized by using a commonly used dye, coumarin 343(C343), and then assembled into p‐type DSSCs through coupling with a platinum photoanode. Photoelectochemical characterization showed that the LP cell exhibited a clearly enhanced power‐conversion efficiency (by a factor of 4) compared with a cell with a NiO‐nanoparticle photocathode (NP). This excellent performance could be attributed to the overlapping layered structure, which favored hole transport, as confirmed by electrochemical impedance spectroscopy, and to the large surface area of the porous NiO nanosheets, which were favorable for dye adsorption.     

Nitrogen and Phosphorus Dual‐Doped Hierarchical Porous Carbon Foams as Efficient Metal‐Free Electrocatalysts for Oxygen Reduction Reactions

Despite tremendous progress in developing doped carbocatalysts for the oxygen reduction reaction (ORR), the ORR activity of current metal‐free carbocatalysts is still inferior to that of conventional Pt/C catalysts, especially in acidic media and neutral solution. Moreover, it also remains a challenge to develop an effective and scalable method for the synthesis of metal‐free carbocatalysts. Herein, we have developed nitrogen and phosphorus dual‐doped hierarchical porous carbon foams (HP‐NPCs) as efficient metal‐free electrocatalysts for ORR. The HP‐NPCs were prepared for the first time by copyrolyzing nitrogen‐ and phosphorus‐containing precursors and poly(vinyl alcohol)/polystyrene (PVA/PS) hydrogel composites as in situ templates. Remarkably, the resulting HP‐NPCs possess controllable nitrogen and phosphorus content, high surface area, and a hierarchical interconnected macro‐/mesoporous structure. In studying the effects of the HP‐NPCs on the ORR, we found that the as‐prepared HP‐NPC materials exhibited not only excellent catalytic activity for ORR in basic, neutral, and acidic media, but also much better tolerance for methanol oxidation and much higher stability than the commercial, state‐of‐the‐art Pt/C catalysts. Because of all these outstanding features, it is expected that the HP‐NPC material will be a very suitable catalyst for next‐generation fuel cells and lithium–air batteries. In addition, the novel synthetic method described here might be extended to the preparation of many other kinds of hierarchical porous carbon materials or porous carbon that contains metal oxide for wide applications including energy storage, catalysis, and electrocatalysis.     

Photoluminescence Quenching in Self‐Assembled CsPbBr3 Quantum Dots on Few‐Layer Black Phosphorus Sheets

An ordered self‐assembly of CsPbBr₃ quantum dots (QDs) was generated on the surface of few‐layer black phosphorus (FLBP). Strong quenching of the QD fluorescence was observed, and analyzed by time‐resolved photoluminescence (TR‐PL) studies, DFT calculations, and photoconductivity measurements. Charge transfer by type I band alignment is suggested to be the cause of the observed effects.     

S掺杂Fe-NC单原子催化剂氧还原机理研究

杂原子掺杂的Fe-NC催化剂在氧还原反应中表现出优异的性能.本工作采用密度泛函理论研究了S原子掺杂对Fe-NC单原子催化剂电子结构的调控及促进氧还原反应的作用机理,分析了硫原子掺杂后Fe-NC催化剂的稳定构型, S原子对FeN4活性位点电子结构的调控,以及氧气的吸附和氧还原反应作用机理.研究结果表明,在FeN4活性位点周围掺杂少量S原子,可以提高催化剂的稳定性. S原子掺杂提高氧还原性能的机理为:(1) S原子的掺杂降低了催化剂的带隙,提高催化剂导电性,有利于电催化氧还原反应;(2) S原子的掺杂可以提高催化剂吸附氧气的能力,有利于氧还原反应;(3)体系中引入四个S原子可以降低氧还原反应的过电位,提高FeN4位点催化氧还原反应的活性.这项工作可能为基于碳材料的单原子催化剂上杂原子掺杂的调控提供新的思路.