Determination of Silver by Chemical Vapor Generation with In Situ Trapping Flame Atomic Absorption Spectrometry

ABSTRACT

The hyphenation of chemical vapor generation with an integrated atom trap system for flame atomic absorption spectrometry (CVG-IAT-FAAS) was evaluated for determination of silver in real samples (coal fly ash, sediment, and nickel alloy). The volatile species of silver were formed by reaction with sodium tetrahydroborate(III) in the presence of nitric acid. A new CVG-IAT-FAAS design (versus a water-cooled single silica tube, double-slotted quartz tube) significantly improved the sensitivity and detection limits compared with conventional flame atomic absorption spectrometry (FAAS) for determination of silver. The concentration limit of detection was 0.7 ng mL^?1 for Ag. The overall efficiency of the vapor generation process was estimated to be ca. 12%. For a 2 min in situ preconcentration time, sensitivity was enhanced 143-fold for Ag using the vapor generation atom trapping technique, compared to conventional FAAS. Sensitivity can be further improved by increasing the collection time. The precision of measurement at 10 ng mL^?1 of Ag was 10% RSD. The accuracy of this method was validated by analyses of NRC GBW 07302 (Stream Sediment), BCS CRM No. 346 (Nickel Alloy), NIST SRM 2710 (Montana Soil), NRCC LUTS-1 (Lobster Hepatopancreas), and NIST SRM 1643e (Trace Element in Water) certified reference materials. The measured Ag contents in these five reference materials were in satisfactory agreement with the certified values (spanning the range of 0.066–35 µg g^?1).     

(Au)核(Ag)壳纳米微粒-火焰原子吸收光谱法测定过氧化氢

在90 ℃水浴条件下,以粒径为10 nm的纳米金做晶种,用柠檬酸三钠还原硝酸银,制备了平均粒径为30 nm的（Au）核（Ag）壳纳米微粒,用高速离心纯化除去过量的柠檬酸三钠获得了较纯的（Au）核（Ag）壳纳米微粒。在pH 3.8的HAc-NaAc缓冲溶液中,Fe2＋催化H2O2反应产生的羟基自由基可氧化（Au）核（Ag）壳纳米微粒生成银离子。离心后,离心液中的银离子可用火焰原子吸收光谱法在328.1 nm波长处测量。随着H2O2浓度增大,离心液中银离子浓度增加,其吸光度值增加。H2O2浓度在2.64～42.24 μmol·L-1范围内与上清液中银离子的原子吸收值ΔA呈良好的线性关系,回归方程为ΔA=0.014c-0.013 1, 相关系数为0.998 4,检出限为0.81 μmol·L-1 H2O2。当用于水样中H2O2的测定,获得了满意的结果。     

原子力显微镜观测生物大分子图像的一种处理方法

针对具有复杂结构的生物大分子图像,本文改进了已有的半自动化方法,设计了一种新的算法去消除背景噪声,目的在于能够从生物大分子图像高效准确地提取量化信息.通过利用这种新的处理程序对生物大分子DNA原子力显微镜图像进行了研究,不仅可以对线性构像的DNA图像进行了处理,而且对于具有分支构像复杂DNA图像也能够处理.本文所提出的数字图像处理方法具有普适性,它也可以被应用到其他成像领域. 关键词： 原子力显微镜 数字图像处理 DNA     

纳米金的SP-ICP-MS表征及测定

纳米技术的不断发展需要更强大的纳米粒子表征技术。单颗粒电感耦合等离子体质谱(SP-ICP-MS)是近年来发展起来的纳米粒子检测新技术,能够快速的向研究人员提供关于纳米粒子尺寸、尺寸分布、粒子数目浓度和元素组成等信息,而且对样品干扰小。本工作探讨了SP-ICP-MS检测技术中影响金纳米粒子(Gold nanoparticles, AuNPs)测定的因素：包括仪器参数的优化,如驻留时间(Dwell time);样品基质的影响,包括含盐、含碳基质;以及溶液中溶解的被分析元素等。测得仪器对金纳米粒子的检测限是23 nm。通过加标回收的方式,测定了实际水样太湖水、东丽湖水中金纳米粒子,加标回收率分别为97.7%和84.4%。最后,对SP-ICP-MS纳米粒子检测的现存问题进行了几点思考。     

Structural and morphological properties of thin ZnO films grown by pulsed laser deposition

The pulsed laser deposition technique was used to produce zinc oxide thin films onto silicon and Corning glass substrates. Homogeneous surfaces exhibiting quite small Root Mean Square (RMS) roughness, consisting of shaped grains were obtained, their grain diameters being 40-90 nm at room temperature and at 650 °C growth respectively. Films were polycrystalline, even for growth at room temperature, with preferential crystallite orientation the (0 0 2) basal plane of wurtzite ZnO. Temperature increase caused evolution from grain to grain agglomeration structures, improving crystallinity. Compressive to tensile stresses transition with temperature was found while the lattice constant decreased.     

Effect of high-temperature buffer thickness on quality of AlN epilayer grown on sapphire substrate by metalorganic chemical vapor deposition

The effect of an initially grown high-temperature AlN buffer (HT-AlN) layer's thickness on the quality of an AlN epilayer grown on sapphire substrate by metalorganic chemical vapor deposition (MOCVD) in a two-step growth process is investigated. The characteristics of AlN epilayers are analyzed by using triple-axis crystal X-ray diffraction (XRD) and atomic force microscopy (AFM). It is shown that the crystal quality of the AlN epilayer is closely related to its correlation length. The correlation length is determined by the thickness of the initially grown HT-AlN buffer layer. We find that the optimal HT-AlN buffer thickness for obtaining a high-quality AlN epilayer grown on sapphire substrate is about 20 nm.     

Regeneration of surface roughness by the Langevin equation using stochastic analysis on AFM image of a carbon fiber

A new method was developed using AFM images of a fiber surface to regenerate the surface roughness in 3D geometry, such as the cylindrical shape of a “model” fiber. The Langevin equation was used to derive the fluctuations of a carbon fiber surface image. The equation contains two quantities, D⁽¹⁾ (h) and D⁽²⁾ (h) which in physics represent drift and diffusion coefficients. Knowing this coefficient and adding a proper noise function, a similar surface of larger dimension with the same statistical properties of the initial data was created. The generated surface was mapped into cylindrical coordinates, then a mesh generated. The resulting reconstructed surface, input over the geometry of a cylindrical shape, can be implemented for finite element analysis of a single fiber surrounded by matrix and generalized to a many fiber model.     

Growth of Ni-Al alloys on Ni(1 1 1), from Al deposits of various thicknesses: (II) Formation of NiAl over a Ni3Al interfacial layer

This paper describes the second part of a study devoted to the growth of thin Ni-Al alloys after deposition of Al on Ni(1 1 1). In the previous paper [S. Le Pévédic, D. Schmaus, C. Cohen, Surf. Sci. 600 (2006) 565] we have described the results obtained for ultra-thin Al deposits, leading, after annealing at 750 K, to an epitaxial layer of Ni₃Al(1 1 1). In the present paper we show that this regime is only observed for Al deposits smaller than 8 × 10¹⁵ Al/cm² and we describe the results obtained for Al deposits exceeding this critical thickness, up to 200 × 10¹⁵ Al/cm². Al deposition was performed at low temperature (around 130 K) and the alloying process was followed in situ during subsequent annealing, by Auger electron spectroscopy, low energy electron diffraction and ion beam analysis-channeling measurements, in an ultra-high vacuum chamber connected to a Van de Graaff accelerator. We evidence the formation, after annealing at 750 K, of a crystallographically and chemically well-ordered NiAl(1 1 0) layer (whose thickness depends on the deposited Al amount), over a Ni₃Al “interfacial” layer (whose thickness—about 18 (1 1 1) planes—is independent of the deposited Al amount). The NiAl overlayer is composed of three variants, at 120° from each other in the surface plane, in relation with the respective symmetries of NiAl(1 1 0) and Ni₃Al(1 1 1). The NiAl layer is relaxed (the lattice parameters of cc-B2 NiAl and fcc-L1₂ Ni₃Al differ markedly), and we have determined its epitaxial relationship. In the case of the thickest alloyed layer formed the results concerning the structure of the NiAl layer have been confirmed and refined by ex situ X-ray diffraction and information on its grain size has been obtained by ex situ Atomic Force Microscopy. The kinetics of the alloying process is complex. It corresponds to an heterogeneous growth leading, above the thin Ni₃Al interfacial layer, to a mixture of Al and NiAl over the whole Al film, up to the surface. The atomic diffusion is very limited in the NiAl phase that forms, and thus the progressive enrichment in Ni of the Al film, i.e. of the mean Ni concentration, becomes slower and slower. As a consequence, alloying is observed to take place in a very broad temperature range between 300 K and 700 K. For annealing temperatures above 800 K, the alloyed layer is decomposed, Al atoms diffusing in the bulk of the substrate.     

Physical-morphological and chemical changes leading to an increase in adhesion between plasma treated polyester fibres and a rubber matrix

The effects of plasma treatment, used to increase adhesion strength between poly(ethylene terephtalate) (PET) fibres and a rubber matrix, were investigated and compared. Morphological changes as a result of atmospheric plasma treatment were observed using scanning electron microscopy (SEM) and atomic force microscopy (AFM). Wettability analysis using a surface energy evaluation system (SEE system) suggested that the plasma treated fibre was more wetting towards a polar liquid. When treated, these fibres showed a new lamellar crystallization, as shown by a new melting peak using differential scanning calorimetry (DSC). X-ray photoelectron spectroscopy (XPS) has been used to study the chemical effect of inert (argon), active and reactive (nitrogen and oxygen) microwave-plasma treatments of a PET surface. Reactive oxygen plasma treatment by a de-convolution method shows new chemical species that drastically alter the chemical reactivity of the PET surface. These studies have also shown that the surface population of chemical species formed after microwave-plasma treatment is dependent on the plasma gas. All these changes cause better adhesion strength of the PET fibres to the rubber matrix.     

In situ gas-phase catalytic properties of TiC-supported size-selected gold nanoparticles synthesized by diblock copolymer encapsulation

TiC-supported size- and shape-selected Au nanoparticles with well defined interparticle distances were synthesized by diblock copolymer encapsulation. Atomic force microscopy (AFM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption (TPD) have been used to investigate the correlation between the nanocatalyst morphological/electronic structure and its chemical reactivity. Using the low-temperature oxidation of CO as a model reaction, our TPD results showed an enhancement of the catalytic activity with decreasing particle size. Two desorption features were observed and assigned to kinks/steps in the gold surface and the Au-TiC interface. The role of the interparticle distance on the activity is discussed. AFM measurements showed drastic morphological changes (Ostwald ripening) on the nanoparticles after CO oxidation when the initial interparticle distance was small (∼30 nm). However, no sintering was observed for Au nanoparticles more widely spaced (∼80 nm).     

Desorption of H ions from water chemisorbed on Si(100) by O 1s excitation - an Auger electron-photoion coincidence spectroscopy study

Auger electron-photoion coincidence (AEPICO) spectroscopy, which has been recently developed and proved to be a very powerful technique for investigating the dynamics of desorption induced by the core-level excitation, is applied to the investigation of Auger-stimulated ion desorption from the chemisorbed-water-Si(100) surface induced by O 1s excitation. It is shown that the fast relaxation of the excited state with a core hole and an excited electron takes place before the core hole decay, and that the desorption yield is enhanced by the shake-up (and/or shake-off) excitation. The relative cross-section for Auger-stimulated ion desorption is estimated, and is shown to increase as holes are created at deeper levels of the valence bands as the final state of the Auger decay. A comparison is also made with condensed H₂O.     

Surface analysis of inhibitor films formed by imidazolines and amides on mild steel in an acidic environment

Imidazolines and amidic precursors were synthesized with good yields through an optimized process. These compounds were evaluated as corrosion inhibitors in an aqueous solution of 1.0 M HCl by gravimetric and polarization techniques. AISI 1018 carbon steel displayed a corrosion rate dependent on the molecular structure and concentration of inhibitor in the testing environment. Adsorption of inhibitors was found to follow the Langmuir's isotherm, this concept together with Gibbs’ free energy provided the basis to arrange corrosion inhibitors according to efficiency and stability. The surface analysis by AFM displayed that the damage on the metallic surface was considerably reduced in the presence of certain inhibitors. XPS determined the presence of a layer of inhibitor on the metal surface with protective properties.     

Formation of a √3 × √3 surface on Si/Ge(1 1 1) studied by STM and LEED

We have performed a detailed study of the formation and the atomic structure of a √3 × √3 surface on Si/Ge(1 1 1) using both scanning tunneling microscopy (STM) and low energy electron diffraction (LEED). Both experimental methods confirm the presence of a √3 × √3 periodicity but unlike the Sn/Ge(1 1 1) and the Sn/Si(1 1 1) surfaces, the Si/Ge(1 1 1) surface is not well ordered. There is no long range order on the surface and the √3 × √3 reconstruction is made up of double rows of silicon atoms separated by disordered areas composed of germanium atoms.     

Surface chemistry and catalysis of oxide model catalysts from single crystals to nanocrystals

Fundamental understandings of surface chemistry and catalysis of solid catalysts are of great importance for the developments of efficient catalysts and corresponding catalytic processes, but have been remaining as a challenge due to the complex nature of heterogeneous catalysis. Model catalysts approach based on catalytic materials with uniform and well-defined surface structures is an effective strategy. Single crystals-based model catalysts have been successfully used for surface chemistry studies of solid catalysts, but encounter the so-called “materials gap” and “pressure gap” when applied for catalysis studies of solid catalysts. Recently catalytic nanocrystals with uniform and well-defined surface structures have emerged as a novel type of model catalysts whose surface chemistry and catalysis can be studied under the same operational reaction condition as working powder catalysts, and they are recognized as a novel type of model catalysts that can bridge the “materials gap” and “pressure gap” between single crystals-based model catalysts and powder catalysts. Herein we review recent progress of surface chemistry and catalysis of important oxide catalysts including CeO₂, TiO₂ and Cu₂O acquired by model catalysts from single crystals to nanocrystals with an aim at summarizing the commonalities and discussing the differences among model catalysts with complexities at different levels. Firstly, the complex nature of surface chemistry and catalysis of solid catalysts is briefly introduced. In the following sections, the model catalysts approach is described and surface chemistry and catalysis of CeO₂, TiO₂ and Cu₂O single crystal and nanocrystal model catalysts are reviewed. Finally, concluding remarks and future prospects are given on a comprehensive approach of model catalysts from single crystals to nanocrystals for the investigations of surface chemistry and catalysis of powder catalysts approaching the working conditions as closely as possible.     

Passivation of the surface of aluminum nanopowders by protective coatings of the different chemical origin

The results of investigation and analysis of electro-exploded aluminum nanopowders, whose surface were passivated with the following substances: liquids - nitrocellulose (NC), oleic acid (C₁₇H₃₃COOH) and stearic acid (C₁₇H₃₅COOH), suspended in kerosene and ethanol, fluoropolymer; solids - boron and nickel; gases - N₂, CO₂ and air (for a comparison) are discussed. The surface protection for the aluminum nanopowders by coatings of different chemical origins leads to the some advantages of the powders properties for an application in energetic systems, e.g. solid propellants and “green” propellants (Al-H₂O). Aluminum nanopowders with a protected surface showed the increased stability to oxidation in air during the storage period and higher reactivity by heating. The TEM-visual diagram of the formation and stabilization of the coatings on the particles has been proposed on the basis of experimental results. The kinetics of the interaction of aluminum nanopowders with air has been discussed. The recommendations concerning an efficiency of the protective “non-Al₂O₃” layers on aluminum nanoparticles were proposed.     

Effects of dual-frequency slit ultrasound on the enzymolysis of high-concentration hydrolyzed feather meal: Biological activities and structural characteristics of hydrolysates

Ultrasound-assisted enzymolysis has been applied to improve conventional enzymolysis, while there are rare reports on the application of ultrasound to high-concentration feather protein enzymolysis. Therefore, the feasibility of dual-frequency slit ultrasound (DFSU) for enzymolysis of high-concentration hydrolyzed feather meal (HFM), as well as the biological activities and structural characteristics of hydrolysates were investigated. The single-factor test was used to optimize the ultrasonic processing parameters: substrate concentration, frequency mode, intermittent ratio, power density, and time. The results showed that protein recovery rate and conversion rate increased by 6.08% and 18.63% under the optimal conditions (200 g/L, 28/80 kHz, 5:2 s/s, 600 W/L, and 3 h) compared with conventional enzymolysis, respectively. The macromolecular proteins in hydrolysates were converted into micromolecular peptides (< 500 Da) when treated by DFSU, and antioxidant activity and angiotensin-I-converting enzyme (ACE) inhibitory activity of hydrolysates were increased. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) images illustrated the microstructure changes of feather protein particles in the ultrasound-assisted enzymatic hydrolysates of HFM (UEH), including more porous, smaller, and more uniform. Additionally, the conformation of protein molecules was significantly affected (P < 0.05), including the increase in free sulfhydryl (SH), the decrease in disulfide bond (SS) and surface hydrophobicity (H₀). Fourier transform infrared (FTIR) spectra analysis further showed that the secondary structure of feather proteins was modified with a reduction in α-helix, β-turn, and β-sheet, while an increase in random coil content was observed. These results indicated that DFSU could be a promising method to enhance high-concentration HFM for preparing peptide-rich hydrolysates with high antioxidant activity and ACE inhibitory activity.