Effect of polymer on rheological behavior of heated solutions of potassium oleate cylindrical micelles

The rheological characteristics of aqueous solutions of potassium oleate cylindrical micelles and their mixtures with hydrophobized polyacrylamide are studied at different temperatures and polymer concentrations no higher than the concentration of overlapping of coils. It is shown that, at all temperatures, the viscosities of surfactant-polymer solutions appear to be noticeably higher than the viscosities of individual surfactant solutions; however, the presence of the polymer has no effect on the viscous flow activation energy.     

Periodic arrays of interfacial cylindrical reverse micelles

We report an approach for the fabrication of periodic molecular nanostructures on surfaces. The approach involves biomimetic self-organization of synthetic wedge-shaped amphiphilic molecules into multilayer arrays of cylindrical reverse micelles. The films were characterized by atomic force microscopy and X-ray reflectivity. These nanostructured films self-assemble in solution but remain stable upon removal and exposure to ambient conditions, making them potentially suitable for a variety of dry pattern transfer methods. We illustrate the generality of this approach by using two distinct molecular systems that vary in size by a factor of 2.     

Model of cylindrical micelles with different endcaps

The system of alcohol (C₈OH) and hexadecyl trimethyl ammonium bromide (CTAB) was studied by molecular dynamics simulation, and the cylindrical (or rod-like) micelles with different endcaps were obtained. The simulation results presented the different terminal structures of the cylindrical (rod-like) micelles. According to the critical packing parameters of the micellar stability theory, the microscopic structures of cylindrical (or rod-like) micelles with different endcaps were analyzed. The shorter rod-like micelle was constituted by the cylindrical body and two swelling spherical endcaps, while the longer cylindrical (or rod-like) micelle had two spherical crown endcaps less than the hemisphere. The models of the cylindrical (rod-like) micelles were presented in detail based on the simulation results and the micellar stability theory.     

Effect of surface field on the morphology of a symmetric diblock copolymer under cylindrical confinement

We have used lattice Monte Carlo simulations to investigate the molecular assembly of symmetric diblock copolymer melts within cylindrical nanochannels. We studied the effect that the surface field has on the copolymer morphology in three cylinders having different diameters. Upon varying the strength of the surface field, we observed a variety of morphologies, including stacked-disk, single-helix, catenoid-cylinder, gyroidal, stacked-circle, and concentric cylindrical barrel structures. The results of these simulations should be helpful when designing polymeric nanomaterials confined in cylindrical nanochannels.     

On the intramicellar fluorescence quenching rate constant in cylindrical micelles

A theoretical model developed for the intramicellar fluorescence quenching rate constant in spherical micelles is extended to cylindrical micelles for diffusion- and reaction-controlled processes. The rate constants for prolate ellipsoidal micelles are expected to be intermediate between those of spherical and those of cylindrical micelles of the same volume. The importance of diffusion transients is dicussed as a function of micellar shape and the fluorescence decay time of the excited probe.     

Kinetic description of the relaxation of surfactant solutions containing spherical and cylindrical micelles

Monotonically decaying relaxation of a materially isolated nonionic surfactant solution containing spherical and cylindrical micelles at the arbitrary heights of the first and second potential barriers of aggregation work is kinetically substantiated. The realistic situation, where the height of second potential barrier is at least slightly higher (by the relative value) than that of the first barrier, is studied. Analytical expressions for two relaxation times of materially isolated surfactant solution are calculated. The shortest of these times corresponds to the relatively fast establishment of the mutual quasi-equilibrium of spherical and cylindrical micelles, beginning with relatively small cylindrical micelles. The longest of relaxation times corresponds to the relatively slow establishment of the total equilibrium of surfactant solution. It is shown that this time (the only significant for the establishment of the final equilibrium of materially isolated surfactant solution) is determined by the height of the first potential barrier of aggregation work and is by no means dependent on the height of the second potential barrier about which not much is known. Variations (with time) of the total concentrations of spherical and cylindrical micelles, surfactant monomer concentration, and the total amount of the substance in cylindrical micelles in the approach of solution to the final equilibrium state are described analytically. It is shown that theoretically admitted small relative deviations of the concentrations of spherical and cylindrical micelles from their values in the final equilibrium state are fully measurable in experiment. Calculated relaxation time of surfactant solution can also be measured experimentally together with the aforementioned values. It is elucidated that this time is approximately proportional to the overall solution concentration, if the second critical micellization concentration (CMC2) by the order of magnitude exceeds the first critical micellization concentration (CMC1), and is virtually independent of the overall solution concentration, if the CMC2 exceeds the CMC1 by two orders of magnitude. The characteristic time of the establishment of quasi-equilibrium distribution of cylindrical micelles throughout the region of their sizes is estimated, thus allowing us to establish the lower limit of the height of the first barrier of aggregation work.Translated from Kolloidnyi Zhurnal, Vol. 67, No. 1, 2005, pp. 47–56.Original Russian Text Copyright © 2005 by Kuni, Shchekin, Grinin, Rusanov.     

Extension of the ladder model of self-assembly from cylindrical to disclike surfactant micelles

The ladder model of growth of cylindrical micelles gives expressions for the micellar size distribution and for the mean aggregation number, which are in good agreement with the experiment. Here, we consider this model and its extension to the case of disclike micelles. In analogy with the modeling of elongated micelles as sphero-cylinders, the disclike micelles can be modeled as toro-discs. Upon micelle growth, the hemispherical caps of a cylindrical aggregate remain unchanged, whereas the semitoroidal periphery of a disclike micelle expands. This effect can be taken into account in the expression for the size distribution of the disclike micelles, which predicts the dependence of the micelle mean aggregation number on the surfactant concentration. It turns out that disclike micelles could form in a limited range of surfactant concentrations, and that their mean aggregation number cannot exceed a certain maximal value. Large disclike micelles can exist only near the border with the domain of cylindrical micelles. Then, small variations in the experimental conditions could induce a transformation of the disclike micelles into cylindrical ones.     

Charge induced pattern formation on surfaces: segregation in cylindrical micelles of cationic-anionic peptide-amphiphiles

Micelles, vesicles, and films composed of two species of incompatible heterogeneous molecules exhibit full internal segregation of the component species. This macroscopic segregation can be inhibited by oppositely charging the two different molecular species. The degree of compatibility achieved by the charges leads to either fully homogenous mixtures or to local segregation and the possible formation of regular patterns. We investigate the induction of periodic surface patterns by the presence of opposite charges in flat films and cylindrical micelles. In the strong segregation limit the incompatibility between species can be described by a line tension parameter gamma. The size of the patterns formed is of the order of a characteristic size L approximately (gamma/sigma(2))(1/2), where sigma is the surface charge density. The pattern symmetry on flat surfaces is function only of the fraction of area covered by the components, f: lamellar for 0.34相似文献   

Temperature effect on the viscoelastic properties of solutions of cylindrical mixed micelles of zwitterionic and anionic surfactants

The viscoelastic properties of semidilute mixed aqueous solutions of oleyl amidopropylbetaine and sodium dodecylbenzene sulfonate are studied in the temperature range of 20–40°C. It is shown that, at 20°C, the solution viscosity can be as high as 390 (Pa s), which is related to the formation of a network of entanglements of long cylindrical micelles of surfactants. It is revealed that, upon heating, the viscosity and relaxation time of the system decrease, while the contour length of cylindrical micelles decreases consider-ably. It is shown that this susceptibility of viscoelastic surfactant solutions to temperature is due to the low energy of break, which is much lower than the energy of covalent bonds.     

Effect of counterion geometry on cationic micelles

The critical micelle concentration, aggregation number, and binding properties of decyltrimethylammonium ion micelles are determined as a function of counterion geometry using the dianions of phthalic, isophthalic, and terephthalic acids. Light-scattering methods were used to secure the CMC and AN data whereas binding data were obtained with a specific ion electrode. It is shown that the differences among the micellar parameters are quite small relative to counterion effects induced by variations in polarizability and hydrophobicity. The data are used as evidence for a disorganized micelle surface containing water-filled grooves and fatty patches which do not discriminate among various geometric dispositions of the carboxylates about the aromatic ring.     

Gold-nanoparticle-stabilized pluronic micelles exhibiting glutathione triggered morphology evolution properties

Nanocomposites constructed from metallic nanoparticles and amphiphilic copolymers have attracted substantial interest for various potential applications. Here we report on the nanocomposites prepared through cross-linking pluronic micelles with gold nanoparticles. The covalent binding of gold nanoparticles onto the micelles and the thermoresponsibility of the system was followed via ultraviolet-visible spectroscopy, dynamic light scattering, transmission electron microscopy, and fluorescence spectroscopy. The gold-nanoparticle-stabilized pluronic micelles can take thiol-exchange reaction with glutathione and their morphology spontaneously evolved and reassembled into large "vesicular"-like nanocapsules. Obvious temperature responsibility was followed in the gold-nanoparticle-stabilized pluronic micelles system and also the glutathione triggered nanocapsules systems. It is believed that the high stability and glutathione responsibility of the Au-NPs shell-cross-linked micelles allowed for high potential in drug delivery and biosensors.     

Crystallization-induced aggregation of block copolymer micelles: influence of crystallization kinetics on morphology

We present a systematic investigation of the crystallization and aggregation behavior of a poly(1,2-butadiene)-block-poly(ethylene oxide) diblock copolymer (PB-b-PEO) in n-heptane. n-Heptane is a poor solvent for PEO and at 70°C the block copolymer self-assembles into spherical micelles composed of a liquid PEO core and a soluble PB corona. Time- and temperature-dependent light scattering experiments revealed that when crystallization of the PEO cores is induced by cooling, the crystal morphology depends on the crystallization temperature (T _c ): Below 30°C, the high nucleation rate of the PEO core dictates the growth of the crystals by a fast aggregation of the micelles into meander-like (branched) structures due to a depletion of the micelles at the growth front. Above 30°C the nucleation rate is diminished and a relatively small crystal growth rate leads to the formation of twisted lamellae as imaged by scanning force microscopy. All data demonstrate that the formation mechanism of the crystals through micellar aggregation is dictated by two competitive effects, namely, by the nucleation and growth of the PEO core.     

Effect of micelles on the acid hydrolysis of N-phenylbenzohydroxamic acid

The effect of cationic (cetylpyridinium bromide and cetylpyridinium chloride) anionic (sodium dodecyl sulfate and lithium dodecyl sulfate) and non-ionic (Brij-35 and Triton-X-100) micelles on the acid-catalyzed hydrolysis of N-phenylbenzohydroxamic acid in 20 vol.% dioxane medium has been investigated. The kinetic results are explained by both pseudo-phase and Piszkiewicz cooperativity models.     

Binary mixing of micelles using Pluronics for a nano-sized drug delivery system

Pluronics with different structural compositions and properties are used for several applications, including drug delivery systems. We developed a binary mixing system with two Pluronics, L121/P123, as a nano-sized drug delivery carrier. The lamellar-forming Pluronic L121 (0.1 wt%) was incorporated with Pluronic P123 to produce nano-sized dispersions (in case of 0.1 and 0.5 wt% P123) with high stability due to Pluronic P123 and high solubilization capacity due to Pluronic L121. The binary systems were spherical and less than 200-nm diameter, with high thermodynamic stability (at least 2 weeks) in aqueous solution. The CMC of the binary system was located in the middle of the CMC of each polymer. In particular, the solubilization capacity of the binary system (0.1/0.1 wt%) was higher than mono-systems of P123. The main advantage of binary systems is overcoming limitations of mono systems to allow tailored mixing of block copolymers with different physicochemical characteristics. These nano-sized systems may have potential as anticancer drug delivery systems with simple preparation method, high stability, and high loading capacity.     

Effects of salts and ethanol on the population and morphology of triblock copolymer micelles in solution

The morphological changes of micelles composed of triblock copolymer of ethylene oxide and propylene oxide (EO20PO70EO20) in the presence of different inorganic salts and ethanol have been investigated using dynamic light scattering (DLS), rheometry, and cryogenic transmission electron microscopy (cryo-EM). The following salts were studied: KF, KCl, KI, LiCl, and CsCl. In the presence of KF, KCl, and CsCl, spherical and wormlike micelles coexist. LiCl and KI have little influence on the morphology of the micelles, whereas KF has the most pronounced effect. In agreement with the well-known Hoffmeister anion salt series, F- has the strongest effect of the three anions studied (F-, Cl-, I-). In contrast, the effectiveness of the cation type does not follow the original Hoffmeister cation series. The addition of ethanol to the KCl micellar solutions leads to the formation of more or longer wormlike micelles, which start to interact at certain copolymer concentrations depending on the volume fraction of ethanol added. Both the dilute and the semidilute regimes of the wormlike micelles were studied. The length of the micelles reaches a maximum value at around 8-10 vol % ethanol, after which it decreases again. At higher ethanol concentrations (18 vol %), spherical micelles are formed. Conclusions from this study enhance our understanding of the role played by ethanol and salts in the formation of micelle-templated mesoporous materials, such as SBA-15.     

Boltzmann distributions and slow relaxation in systems with spherical and cylindrical micelles

Equilibrium and nonequilibrium distributions of molecular aggregates in a solution of a nonionic surfactant are investigated at the total surfactant concentration above the second critical micelle concentration (CMC2). The investigation is not limited by the choice of a specific micellar model. Expressions for the direct and reverse fluxes of molecular aggregates over the potential humps of the aggregation work are derived. These aggregation work humps set up activation barriers for the formation of spherical and cylindrical micelles. With the aid of the expressions for molecular aggregate fluxes, a set of two kinetic equations of micellization is derived. This set, along with the material balance equation, describes the molecular mechanism of the slow relaxation of micellar solution above the CMC2. A realistic situation has been analyzed when the CMC2 exceeds the first critical micelle concentration, CMC1, by an order of magnitude, and the total surfactant concentration varies within the range lying markedly above the CMC2 but not by more than 2 orders of magnitude. For such conditions, an equation relating the parameters of the aggregation work of a cylindrical micelle to the observable ratio of the total surfactant concentration and the monomer concentration is found for an equilibrium solution. For the same conditions, but in the nonequilibrium state of materially isolated surfactant solution, a closed set of linearized relaxation equations for total concentrations of spherical and cylindrical micelles is derived. These equations determine the time development of two modes of slow relaxation in micellar solutions markedly above the CMC2. Solving the set of equations yields two rates and two times of slow relaxation.