Crystallization of silver stearate from sodium stearate dispersions

Silver carboxylates, the common silver source used for photothermographic imaging materials, are normally obtained from the reaction between sodium soap (e.g., sodium stearate) and silver nitrate. They form platelet-like crystals with a lamellar structure in water at room temperature. Light microscopy investigations reveal that the formation of silver stearate (AgSt) crystals follows a diffusion-controlled mechanism. The reaction between the sodium soap and silver nitrate preferentially occurs in solution rather than on the soap fiber solid interface. Cryogenic transmission electron microscopy, together with an on-the-grid reaction technique, provides a useful tool to directly image silver stearate microstructures at the initial stages of AgSt precipitation. The AgSt reaction product first forms particles about 5 nm in size, which is similar to the d-spacing of final AgSt crystals. Those particles aggregate to produce larger and loosely packed embryonic crystals, the precursors to the ultimate silver stearate crystals.     

Chemical microcharacterization of ultrathin iodide conversion layers and adsorbed thiocyanate surface layers on silver halide microcrystals with time-of-flight SIMS.

The technique of imaging time-of-flight secondary ion mass spectrometry (TOF-SIMS) and dual beam depth profiling has been used to study the composition of the surface of tabular silver halide microcrystals. Analysis of individual microcrystals with a size well below 1 microm from a given emulsion is possible. The method is successfully applied for the characterization of silver halide microcrystals with subpercent global iodide concentrations confined in surface layers with a thickness below 5 nm. The developed TOF-SIMS analytical procedure is explicitly demonstrated for the molecular imaging of adsorbed thiocyanate layers (SCN) at crystal surfaces of individual crystals and for the differentiation of iodide conversion layers synthesized with KI and with AgI micrates (nanocrystals with a size between 10 and 50 nm). It can be concluded that TOF-SIMS as a microanalytical, surface-sensitive technique has some unique properties over other analytical techniques for the study of complex structured surface layers of silver halide microcrystals. This offers valuable information to support the synthesis of future photographic emulsions.     

Nucleation at three-phase junction lines: in situ atomic force microscopy of the electrochemical reduction of sub-micrometer size silver and mercury(I) halide crystals immobilized on solid electrodes

The electrochemical reduction of sub-micrometer size silver halide crystals immobilized on the surface of gold and platinum electrodes starts at the three-phase junction line where the three phases metal, silver halide and electrolyte solution meet. Following nucleation at this line the reaction advances within seconds on the surface of the silver halide crystals until the entire surface is covered with about 20 atomic layers of silver and the reduction is terminated. The silver layer can be oxidized anodically and the next layer of the silver halide crystals becomes accessible for further reduction. This sequence of reductions and oxidations can be repeated. The nucleation of silver at the three-phase junction line can be detected by atomic force microscopy (AFM) measurements when, after a short reduction pulse and dissolution of the remaining silver halide, a thin ring of silver is observed at the place where the three-phase junction line was situated. The entire scenario of electrochemical reduction of immobilized silver halide crystals depends on the crystal size. Large crystals (about 100 µm edge-length) immobilized on the surface of optically transparent indium tin oxide electrodes show the growing of silver whiskers on the crystal surface, similar to what is known for the reduction of silver halides with photographic developers. However, also in the case of the large crystals, the reduction starts at the three-phase junction line. The electrochemical reduction of immobilized sub-micrometer size crystals of Hg₂Cl₂ and Hg₂Br₂ starts also at the three-phase junction. In the case of gold electrodes the formation of liquid mercury is followed by the formation of a solid crystalline gold amalgam. In the case of platinum electrodes the liquid mercury wets the platinum surface but does not destroy it.     

片状卤化银晶体的制备、结构与性能的研究——Ⅱ.pAg对片状颗粒的尺寸、纵横比、碘离子分布及离子电导率的影响

本文研究了双注法制备片状卤化银微晶时,pAg值对所形成的卤化银片状颗粒的尺寸、纵横此、碘离子分布以及离子电导率的影响。随着pAg值的升高,片状颗粒的尺寸和纵横比都相应地增大和升高,且越来越多的碘离子从颗粒中心向外层迁移,直至到达表层,这说明存在晶体的重结晶过程。表面层的溴碘原子比是用X射线光电子能谱仪(XPS)测定的,并测量了不同pAg值下制备的不同尺寸的片状卤化银乳剂的介电损耗频谱。其结果表明,片状颗粒的尺寸影响其离子电导率,表层碘含量的影响不明显。     

A new strategy for electrochemical immunoassay based on enzymatic silver deposition on agarose beads

A novel, sensitive electrochemical immunoassay in a homogeneously dispersed medium is described herein based on the unique features of agarose beads and the special amplified properties of biometallization. The immunochemical recognition event between human immunoglobulin G (IgG) and goat anti-human IgG antibody is chosen as the model system to demonstrate the proposed immunoassay approach. Avidin-agarose beads rapidly react with the biotinylated goat anti-human IgG antibody to form agarose beads-goat anti-human IgG conjugate (agarose bead-Ab). Agarose bead-Ab, alkaline phosphatase conjugated goat anti-human IgG antibody (ALP-Ab) and the human IgG analyte are mixed to form sandwich-type immunocomplex followed by the addition of the enzymatic silver deposition solution to deposit silver onto the surface of proteins and agarose beads. The silver deposited are dissolved and quantified by anodic stripping voltammetry. The influence of relevant experimental variables was examined and optimized. The logarithm of the anodic stripping peak current depended linearly on the logarithm of the concentration of human IgG in the range from 1 to 1000 ng/ml. A detection limit as low as 0.5 ng/ml human IgG was attained by 3σ-rule. The R.S.D. of the approach is 9.65% for eight times determination of 10 ng/ml human IgG under same conditions. Optical microscope and TEM graphs were also utilized to characterize agarose beads and silver nanoparticles formed.     

Influence of pinning effects on the electrochemical formation of silver patterns in agarose-containing sols and gels

The formation of silver patterns via electrolysis from aqueous silver sulfate + x% w/v agarose sol and gel media, with and without supporting electrolyte, in a quasi-two-dimensional (2D) cylindrical cell at room temperature, is utilized as a reference system to investigate the complexity of pinning effects. From pattern morphology and electrochemical data, both delocalized and localized pinning in the bulk dominate the drift of the growth front, depending on the concentration of agarose in the heterogeneous media. Delocalized pinning results from mobile, small agarose aggregates at the growth front and from their accumulation by the front drift. For gels, localized pinning comes from their own percolated structure. A depinning/pinning transition is observed in going from sols to gels. The relative contribution of diffusion and advection in mass-transport-controlled silver electrodeposition depends on the plating bath composition. On the other hand, silver ion attachment to the cathode appears to be interfered with by some screening caused by weakly adsorbed, mobile agarose aggregates at the metal surface without slowing down the rate of the electron-transfer step at the cathode. Their relative contribution of a delocalized, localized pinning and screening effect to a great extent determines the morphology and transition in the growth mode of silver patterns in both media. The analysis of charge and current transients and the corresponding silver pattern morphologies for open and dense radial patterns is made. Results are qualitatively simulated with a novel, rather simple cellular automaton algorithm.     

Assessing the synergy effect of additive and matrix on single-crystal growth: Morphological revolution resulted from gel-mediated enhancement on CIT-calcite interaction

CIT additives are active in crystal morphology modification at relatively high concentration. Once agarose gel is simultaneously introduced, the curved morphological feature of calcite crystal emerges at a much lower concentration of CIT additives.     

Nanosecond probing of the early nucleation steps of silver atoms in colloidal zeolite by pulse radiolysis and flash photolysis techniques

The process of formation and the subsequent aggregation of silver atoms (Ag⁰) in nanosized zeolite beta (BEA) are studied by transient absorption spectroscopy. The zeolite nanocrystals are stabilized in aqueous colloidal suspensions with a narrow particle size distribution in the range 30–60 nm. The reduction of silver cations is initiated either by pulse radiolysis of the aqueous suspension or by photoinduced electron transfer using an organic electron donor adsorbed in the zeolite framework. The silver atom in BEA nanosized crystals is found to be stable on the microsecond timescale.     

Crystallization of silver carboxylates from sodium carboxylate mixtures

Silver carboxylates can be made by the reaction of silver nitrate and the corresponding sodium carboxylates. The length of the alkyl chain has a significant impact on the product behavior. In this study, 18, 20, and 22 carbon chains (stearate, arachidate, and behenate, respectively) have been selected. All three sodium carboxylates are very insoluble in water at room temperature. Solutions are obtained above the Krafft temperature, which precipitates lamellar crystals if cooled at the proper cooling rate. Depending on the chain length, metastable morphologies, such as vesicles and tiny fibers, can be seen consecutively before hexagonal plates form. The carboxylate with the shorter chain length reaches equilibrium more quickly. All three silver carboxylates also take on a lamellar structure. Small-angle X-ray scattering (SAXS) shows that the d spacing of the crystals increases as the chain length increases. Cryo-TEM illustrates that the crystallites are the result of micelle nucleation and micelle aggregation. In addition, the crystallization process in the presence of silver bromide nanocrystals has been investigated. In the initial stage, an epitaxial interface is formed between the silver carboxylate crystallites and the cubic silver bromide grains. Budlike and strandlike structures grow because of it. The consequent strand enclosure restrains the crystal growth, which reduces the size and changes the morphology of the crystals.     

Synthesis and characterization of silica-silver core-shell composite particles with uniform thin silver layers

Silica-silver core-shell composite particles with uniform thin silver layers were successfully synthesized by a facile and one-step ultrasonic electrodeposition method. By electrolysis of the slurry consisting of preformed silica spheres and silver perchlorate without any additives, the homogenous composite particles can be prepared. The average size of single silver crystals in the composite is about 12 nm and the thickness of silver layer is 14±2 nm. Moreover, the continuity of Ag distribution, the surface roughness and the thickness of silver layer are controllable by adjusting the current density (I), the concentration of electrolyte (C) and the reaction time (t). Optical properties of the composite particles with different silver content were also investigated.     

Comparison of oligonucleotide migration in a bicontinuous cubic phase of monoolein and water and in a fibrous agarose hydrogel

Porous hydrogels such as agarose are commonly used to analyze DNA and water-soluble proteins by electrophoresis. More recently lyotropic liquid crystals, such as the diamond cubic phase formed by the lipid monoolein and water, has become a new type of well-defined porous structure of interest for both hydrophilic and amphiphilic analytes. Here we compare these two types of matrixes by investigating the nature of retardation they confer to an oligonucleotide that migrates in their respective aqueous phases. The retardation for a 25-mer oligonucleotide was found to be about 35-fold stronger in the cubic phase than in an agarose hydrogel modified to have the same average pore size. According to modelling, the strong retardation is primarily due to the fact that hydrodynamic interaction with the continuous monoolein membrane is a stronger source of friction than the steric interactions (collisions) with discrete gel fibres. A secondary effect is that the regular liquid crystal has a narrower pore-size distribution than the random network of the agarose gel. In agreement with experiments, these two effects together predict that the retardation in the cubic phase is a 30-fold stronger than in an agarose gel with the same average pore radius.     

Stabilization of thin-layer agarose gels after isoelectric focusing with polyacrylamide enables reverse imidazole-zinc staining and facilitates two-dimensional gel electrophoresis

Large-pore-size agarose gels provide excellent resolving capacity for high molecular weight biomolecules. Thin-layer agarose isoelectric focusing (IEF) gels on polyester support films are especially useful for the separation of large proteins based on their pI in native conformation, but the method has suffered from the lack of detection methods compatible with agarose gels in hydrated form. Recently, an acrylamide copolymerization method was reported to enable mass-spectrometry-compatible silver staining and in-gel digestion of proteins. In this study, the method was further applied by demonstrating successful reverse imidazole-zinc staining of thin-layer agarose IEF gels copolymerized with acrylamide. The sensitivity of the reverse staining method on the composite gel at its best equaled the sensitivity of the traditional dried agarose silver staining method. Owing to the increased durability and reversible detection, the reverse-stained first-dimension gel could be conveniently prepared for the second-dimension sodium dodecyl sulfate polyacrylamide gel electrophoresis by reduction and alkylation. In addition, the micropreparative generation of tryptic peptides of Coomassie brilliant blue R-250 stained proteins in the composite gel is demonstrated.     

Silver colloid nanoparticles: synthesis, characterization, and their antibacterial activity

A one-step simple synthesis of silver colloid nanoparticles with controllable sizes is presented. In this synthesis, reduction of [Ag(NH(3))(2)](+) complex cation by four saccharides was performed. Four saccharides were used: two monosaccharides (glucose and galactose) and two disaccharides (maltose and lactose). The syntheses performed at various ammonia concentrations (0.005-0.20 mol L(-1)) and pH conditions (11.5-13.0) produced a wide range of particle sizes (25-450 nm) with narrow size distributions, especially at the lowest ammonia concentrations. The average size, size distribution, morphology, and structure of particles were determined by dynamic light scattering (DLS), transmission electron microscopy (TEM), and UV/Visible absorption spectrophotometry. The influence of the saccharide structure (monosacharides versus disaccharides) on the size of silver particles is briefly discussed. The reduction of [Ag(NH(3))(2)](+) by maltose produced silver particles with a narrow size distribution with an average size of 25 nm, which showed high antimicrobial and bactericidal activity against Gram-positive and Gram-negative bacteria, including highly multiresistant strains such as methicillin-resistant Staphylococcus aureus. Antibacterial activity of silver nanoparticles was found to be dependent on the size of silver particles. A very low concentration of silver (as low as 1.69 mug/mL Ag) gave antibacterial performance.     

Sieving of ionic constituents across moving boundaries in gel electrophoresis

The representative beta-hydroxyethylmorpholinium-chloride-bicinate moving boundary with a trailing ion net mobility relative to Na+ of 0.41, detected by precipitation of chloride with silver nitrate, exhibits a decreasing chloride mobility at increasing polyacrylamide gel concentrations from 3.5 to 45%T, 5%CBis. This decrease, largely due to an increase of field strength at constant current, is described by a convex* plot of log (mobility) vs. %T (Ferguson plot) and signifies that chloride/bicinate are sieved by the gel. In agarose gels, the same plot of mobility vs. gel concentration is constant below 7% gel concentration, since in those gels field strength and migration rate remain the same within that gel concentration range. Both in polyacrylamide and in agarose gels the displacement rate of the chloride-bicinate boundary as a function of the time of electrophoresis or distance migrated remains invariant within 15%. The plot of log (mobility) vs. gel concentration extrapolated to 0%T is 5.85 and 5.41 (10(-5) cm2s-1V-1) for polyacrylamide and for agarose (SeaKem HGT-P,FMC) gels, respectively. The slightly decreased mobility intercept at 0%T for agarose is presumably due either to the electroendosmotic properties of agarose HGT-P and/or failure to Sufficiently take into account the flattening of the Ferguson plot in the polyacrylamide concentration range below 3% in which a transition from a gel to a fluid (sol) medium takes place.     

Selective growth and distribution of crystalline enantiomers in hydrogels

The crystallization of sodium chlorate (NaClO3) is a classic example of spontaneous chirality, since it is achiral in solution but adopts a chiral form in the solid state. While crystal growth of NaClO3 from pure aqueous solutions yields a 50:50 statistical distribution of d- and l-crystals, large enantiomeric excesses of either d- and l-crystals can be achieved by crystal growth in agarose gel, a naturally occurring chiral polysaccharide. The influence of gel density (0.1-0.75 wt %), temperature, and the diffusion of cosolvents on crystal distribution was discerned from statistical data obtained from 752 gel-mediated crystallization experiments yielding 12,384 individual crystals. These studies demonstrate that the magnitude and direction of the bias can be selectively engineered toward either d- or l-forms by changing the gelation conditions. Aqueous agarose gels infused with 48 wt % NaClO3 at 6 degrees C, favored the growth of d-NaClO3 crystals, with ee's reaching 22% at the highest gel concentrations. Crystal growth under methanol diffusion favored deposition of the opposite enantiomorph, l-NaClO3. The bias in the crystal distribution is enhanced at higher temperatures. Aqueous gels at 24 degrees C infused with methanol cosolvent favored l-NaClO3, with ee's reaching 53%. The changing magnitude and direction of the enantiomorph bias can be ascribed to differences in the agarose conformation and intermolecular interactions between the gel and crystal surfaces that inhibit the formation of the two enantiomers to different extents.     

Selective Synthesis of Silver Nanoparticles onto Potassium Hexaniobate: Structural Organisation with Bactericidal Properties

Silver‐based nanocomposites are known to act as biocides against a series of microorganisms and are largely studied as an alternative to substitute conventional antibiotics that show decreasing efficacy. In this work, an eco‐friendly method to synthesize silver nanoparticles assembled on the surface of hexaniobate crystals is reported. By means of ion exchange, K⁺ ions of layered potassium hexaniobate were partially substituted by Ag⁺ ions and the resulting material was exposed to UV light. The irradiation allowed the reduction of silver ions with consequent formation of silver nanoparticles located only on the hexaniobate surface, whereas Ag⁺ ions located in the interlayer space remained in the ionic form. Increasing UV‐light exposure times allowed controlling of the silver nanoparticle size. The antibacterial effects of the pristine potassium hexaniobate and of silver‐containing hexaniobate samples were tested against Escherichia coli (E. coli). The antibacterial efficacy was determined to be related to the presence of silver in hexaniobate. An increasing activity against E. coli was observed with the decrease in silver nanoparticles size, suggesting that silver nanoparticles of distinct sizes interact differently with bacterial cell walls.     

Hydrogels coupled with self-assembled monolayers: an in vitro matrix to study calcite biomineralization

This paper describes the control of the nucleation and growth of calcite crystals by a matrix composed of an agarose hydrogel on top of a carboxylate-terminated self-assembled monolayer (SAM). The design of this matrix is based upon examples from biomineralization in which hydrogels are coupled with functionalized, organic surfaces to control, simultaneously, crystal morphology and orientation. In the synthetic system, calcite crystals nucleate from the (012) plane (the same plane that is observed in solution growth). The aspect ratio (length/width) of the crystals decreases from 2.1 +/- 0.22 in solution to 1.2 +/- 0.04 in a 3 w/v % agarose gel. One possible explanation for the change in morphology is the incorporation of gel fibers inside of the crystals during the growth process. Etching of the gel-grown crystals with deionized water reveals an interpenetrating network of gel fibers and crystalline material. This work begins to provide insight into why organisms use hydrogels to control the growth of crystals.     

Preparation of silver nanoparticles in liquid crystalline systems

Silver nanoparticles preparation and the aggregation stability of the particles was investigated in lamellar liquid crystalline systems. A liquid crystal of HDTABr/pentanol/water was first prepared. The water content was next increased while keeping the mass ratio of HDTABr and pentanol constant. Silver nanoparticles were produced by replacing the aqueous phase by Ag sols of various concentrations (0.5–5×10^–3 mol/l) or by an in situ preparation method, i.e., interlamellar reduction of Ag⁺ ions in the liquid crystalline phase. The stability of the silver nanoparticles was monitored by UV-VIS spectroscopy and TEM. The particle size ranged from 5 to 44 nm. The kinetic of silver nanoparticle aggregation was investigated. The effect of nanoparticles on structural ordering in liquid crystals was studied by XRD measurements and it was established that the lamellar distance (d_L) was only slightly altered. Electronic Publication     

Silver nanoparticle formation in microemulsions acting both as template and reducing agent

A novel method of making silver nanoparticles in water-in-oil microemulsions using the surfactants as both the reducing agent and as the structure-directing agent is presented. Since no external strong reducing agent is used the kinetics of the formation is slow, which makes it possible to study the silver nanoparticle formation in situ. The microemulsions used were based on either the nonionic surfactant Brij30 (C12E4), which reduces the silver ion to metallic silver and is thereby partly oxidized, or mixtures of Brij30 and AOT (sodium bis(2-ethylhexyl) sulfosuccinate, where the latter does not reduce the silver ions. The influences of silver ion and nonionic surfactant concentrations on the formation kinetics of the nanoparticles were followed in situ using UV-vis spectroscopy, and both parameters were found to have a big influence. The microemulsion droplet's size, size distribution, and shape were examined by small-angle X-ray scattering (SAXS), and the formed silver nanoparticles were studied using both transmission electron microscopy and SAXS. The SAXS measurements showed that the presence of silver nitrate does not affect the microemulsion systems noticeably and that the droplet's size and shape are retained during the particle formation. It is shown that the size and morphology of the particles do not directly follow the shape and size of the microemulsion droplets even though there is a relation between the droplet size and the radii of the formed particles.     

Quantitative secondary ion mass spectrometry depth profiling of surface layers of cubic silver halide microcrystals

The present article describes depth-profiling studies on populations of cubic silver halide microcrystals (typical size between 400 and 600 nm). These crystals consist of mixed halides (Cl, Br, I) and are characterized by internal halide distributions such as core-shell structures. Determination of the spatial distribution of the different halides in the microcrystals offers valuable information for the optimization of the crystal design of new photographic materials. The first part describes the calibration of the sputtered depth, which is more complicated than in the one-dimensional case of flat surfaces. In a second part, three different quantification methods [halide intensity ratios, XCs₂⁺ detection (X=halide) and the infinite velocity method] are used to determine the mean composition of the surface layer as a function of sputtered depth in the silver halide crystals. Although particles of submicrometer size are obviously not the ideal samples for depth profiling, a good correlation with values obtained by scanning electron microscopy energy dispersive X-ray microanalysis and wavelength dispersive X-ray fluorescence bulk analysis could be achieved.