Fluorine-19 NMR spectroscopy of polyhalonaphthalenes. Part II polychloropolyfluoronaphthalenes via nucleophilic fluoride dechlorination

Six new polychloropolyfluoronaphthalenes have been identified by F-19 NMR whose empirical formulae are C₁₀ Cl_8−n F_n where n is 5 and 6 two trichloropentafluoronaphthalenes and four dichlorohexafluoronaphthalenes:-

• 1,3,8-trichloro-2,4,5,6,7-pentafluoronaphthalene,

• 1,3,6-trichloro-2,4,5,7,8-pentafluoronaphthalene,

• 1,3-dichloro-2,4,5,6,7,8-hexafluoronaphthalene,

• 1,8-dichloro-2,3,4,5,6,7-hexafluoronaphthalene,

• 1,6-dichloro-2,3,4,5,7,8-hexafluoronaphthalene and

• 2,7-dichloro-1,3,4,5,6,8-hexafluoronaphthalene.

In the partly fluorinated compounds such as 1,3,6,8-tetrachloro- 2,4,5,7-tetrafluoronaphthalene, nucleophilic fluoride dechlorination occurs at both and β positions. Initial substitution in octachloronaphthalene is more selective and occurs predominantly at the -position; both subsequent exchanges occur at sites two carbons away from the initial site. The results support the idea that the transition state is stabilised by chlorine at the sites of electron density, ortho and para to the site of nucleophilic attack.     

Thermal stability of an explosive detonator

Mercuric 5-nitrotetrazole is a possible replacement for lead azide. The thermal decomposition peak maximum ranged from 185 to 270°C as the heating rate increased from 0.1 to 100°C min⁻¹. The activation energy and frequency factor for thermal decomposition were determined from dynamic and isothermal DSC and isothermal TG data; the average values were 38.8 kcal mol⁻¹ and 3.56×10¹⁴ s⁻¹. A half-life experiment confirmed the kinetic constants and indicated that the decomposition reaction was first order. The heat of explosion was determined by a pressure DSC test and found to be 2587 J g⁻¹. The linear coefficient of expansion was 37±2×10⁻⁶°C⁻¹ from −60 to 160°C and indicated secondary transitions near −10 and 90°C. The specific heat was 0.0003154T+0.1339 in the region −40–90°C. The critical temperature for a slab with a half-thickness of 0.035 cm was calculated to be 232 °C.     

Oxidation of crystal violet and malachite green in aqueous solutions — a kinetic spectrophotometric study

The reactions of two triphenyl methane (TPM) dyes—crystal violet (CV⁺) and malachite green (MG⁺)—with N₃^• and OH^• radicals were studied by pulse radiolytic kinetic spectrophotometry. The rate constants for the reaction of the cationic dyes (D⁺) with N₃^• are (9.0±0.6)×10⁹ and (3.0±0.2)×10⁹ dm³ mol⁻¹ s⁻¹ respectively and those for the reaction with OH^• are obtained as (8.0±0.6)×10⁹ and (1.1±0.1)×10⁹ dm³ mol⁻¹ s⁻¹ respectively. The transient spectra resulting from the oxidation of the dyes were characterized. The time-resolved spectra indicate that the reaction with OH^• radicals initially generates an adduct which subsequently dissociates to form the radical dication D^•2+. The D^•2+ species decay by further reaction with the parent dye.     

A simultaneous TG–DTA study of the thermal decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester (salsalate)

Simultaneous thermogravimetry–differential thermal analysis (TG–DTA) and gas and liquid chromatography with mass spectrometry detection have been used to study the kinetics and decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester, commercially known as salsalate. Samples of salsalate were heated in the TG–DTA apparatus in an inert atmosphere (100 ml min⁻¹ nitrogen) in the temperature range 30–500 °C. The data indicated that the decomposition of salsalate is a two-stage process. The first decomposition stage (150–250 °C) had a best fit with second-order kinetics with E_a=191–198 kJ/mol. The second decomposition stage (300–400 °C) is described as a zero-order process with E_a=72–80 kJ/mol. The products of the decomposition were investigated in two ways:

(a)Salsalate was heated in a gas chromatograph at various isothermal temperatures in the range 150–280 °C, and the exit gas stream analyzed by mass spectrometry (GC–MS). This approach suggested that salsalate decomposes with the formation of salicylic acid, phenol, phenyl salicylate, and cyclic oligomers of salicylic acid di- and tri-salicylides.

(b)One gram samples of salsalate were heated in a vessel under nitrogen to 150 °C, and the residues were analyzed by liquid chromatography–mass spectrometry (LC–MS). The major compound detected was a linear tetrameric salicylate ester.

     

From ephemers to monomers, oligomers and polymers. New methods for the generation and transformation of silanones

New efficient routes to the generation of silanones at relatively low temperatures are based on the following reactions:

1. (1) reaction of linear and branched perhydrocarbyldisiloxanes and oligosiloxanes, and of some of their C-functional derivatives, with gallium or indium iodides or bromides;

2. (2) reaction of hydrocarbylchlorosilanes R_4−nSiCl_n (n = 2–4) and SiCl₄ with dimethylsulphoxide (with or without Mg or Zn);

3. (3) Autodecomposition of organosilicon compounds containing and groups;

4. (4) reaction of R_4−nSiCl_n with metal oxides of high redox potential (with or without the presence of CH₃CN).

Insertions of dialkylsilanones into Si---O---Si and Si---O---C linkages as well as into the Si---Cl bond have been studied.     

Donnan dialysis preconcentration coupled with ion chromatography and electrocatalytic oxidation for the determination of cyanide

An electrocatalytic amperometric detector for the ion chromatographic determination of CN⁻ is described. A conducting composite that is based on a graphite-loaded sol–gel material comprises the working electrode. The composite is doped with a Ru^II metallodendrimer which is demonstrated to promote the electrochemical oxidation of CN⁻ at potentials positive of 0.5 V vs. Ag/AgCl. In 6 mM NaOH, 0.05 M NaCl flowed at 1.0 ml min⁻¹, a 5-point calibration curve with the following linear least squares parameters is obtained over the range, 1.0–30 M CN⁻: slope, 24.2±0.1 nA M⁻¹; intercept, −6±2 nA; and r, 0.9997. The detection limit, 0.7 μM CN⁻, compares favorably to that obtained by amperometry at a silver electrode, 0.5 μM CN⁻, under comparable experimental conditions. A 60-min preconcentration by Donnan dialysis increases the sensitivity by a factor of 23.6.     

New aspects of the reaction of silver(I) cations with the ethylenediaminetetraacetate ion

The highly neutralized ethylenediaminetetraacetate (EDTA) titrant (95–99% as Y⁴⁻ anion) precipitates with Ag⁺ cations to form the Ag₄Y species, in aqueous medium, which is well characterized from conductometric titration, thermal analysis and potentiometric titration of the silver content of the solid. The precipitate dissolves in excess Y⁴⁻ to form a complex, AgY³⁻. Equilibrium studies at 25°C and ionic strength 0.50 M (NaNO₃) have shown from solubility and potentiometric measurements that the formation constant (95% confidence level) β₁ = (1.93 ± 0.07) × 10⁵ M⁻¹ and the solubility products are K_S0 = [Ag +]⁴[Y⁴⁻] = (9.0 ± 0.4) × 10⁻¹⁸ M⁵ and K_S1 = [Ag +]³[AgY³⁻] = (1.74 ± 0.08) × 10⁻¹² M⁴. The presence of Na⁺, rather than ionic strength, markedly affects the equilibrium; the data at ionic strength 0.10 M are: β₁ = (1.19 ± 0.03) × 10⁶ M⁻¹, K_S0 = (1.6 ± 0.4) × 10⁻¹⁹ M⁵ and K_S1 = (1.9 ± 0.5) × 10⁻¹³ M⁴; at ionic strength tending to zero; β₁ = (1.82 ± 0.05) × 10⁷ M⁻¹, K_S0 = (2.6 ± 0.8) × 10⁻²² M⁵ and K_S1 = (5 ± 1) × 10⁻¹⁵ M⁴. The intrinsic solubility is 2.03 mM silver (I) in 0.50 M NaNO₃. Well-defined potentiometric titration curves can be taken in the range 1–2 mM with the Ag indicator electrode. Thermal analysis revealed from differential scanning calorimetry a sharp exothermic peak at 142°C; thermal gravimetry/differential thermal gravimetry has shown mass loss due to silver formation and a brown residue, a water-soluble polymeric acid (decomposition range 135–157°C), tending to pure silver at 600°C, consistent with the original Ag₄Y salt.     

Flow injection determination of selenium by successive retention of Se(IV) and tetrahydroborate(III) on an anion-exchange resin and hydride generation electrothermal atomization atomic absorption spectrometry with in-atomizer trapping: Part 1. Method development and investigation of interferences

A sample solution was passed at 20 ml min⁻¹ through a column (150×4 mm²) of Amberlite IRA-410Stron anion-exchange resin for 60 s. After washing, a solution of 0.1% sodium borohydride was passed through the column for 60 s at 5.1 ml min⁻¹. Following a second wash, a solution of 8 mol l⁻¹ hydrochloric acid was passed at 5.1 ml min⁻¹ for 45 s. The hydrogen selenide was stripped from the eluent solution by the addition of an argon flow at 150 ml min⁻¹ and the bulk phases were separated by a glass gas–liquid separator containing glass beads. The gas stream was dried by passing through a Nafion® dryer and fed, via a quartz capillary tube, into the dosing hole of a transversely heated graphite cuvette containing an integrated L’vov platform which had been pretreated with 120 μg of iridium as trapping agent. The furnace was held at a temperature of 250°C during this trapping stage and then stepped to 2000°C for atomization. The calibration was performed with aqueous standards solution of selenium (selenite, SeO₃²⁻) with quantification by peak area. A number of experimental parameters, including reagent flow rates and composition., nature of the gas–liquid separator, nature of the anion-exchange resin, column dimensions, argon flow rate and sample pH, were optimized. The effects of a number of possible interferents, both anionic and cationic were studies for a solution of 500 ng 1⁻¹ of selenium. The most severe depressions were caused by iron (III) and mercury (II) for which concentrations of 20 and 10 mg  1⁻¹ caused a 5% depression on the selenium signal. For the other cations (cadmium, cobalt, copper, lead,. magnesium, and nickel) concentrations of 50–70 mg 1⁻¹ could be tolerated. Arsenate interfered at a concentration of 3 mg⁻¹, whereas concentrations of chloride, bromide, iodide, perchlorate, and sulfate of 500–900 mg l⁻¹ could be tolerated. A linear response was obtained between the detection limit of 4 ng 1⁻¹, with a characteristic mass of 130 pg. The RSDs for solutions containing 100 and 200 ng 1⁻¹ selenium were 2.3% and 1.5%, respectively.     

Investigation of on-line coupling electrothermal atomic absorption spectrometry with flow injection sorption preconcentration using a knotted reactor for totally automatic determination of lead in water samples

A flow injection on-line sorption preconcentration electrothermal atomic absorption spectrometric system for fully automatic determination of lead in water was investigated. The discrete non-flow-through nature of ETAAS, the limited capacity of the graphite tube and the relatively large volume of the knotted reactor (KR) are obstacles to overcome for the on-line coupling of the KR sorption preconcentration system with ETAAS. A new FI manifold has been developed with the aim of reducing the eluate volume and minimizing dispersion. The lead diethyldithiocarbamate complex was adsorbed on the inner walls of a knotted reactor made of PTFE tubing (100 cm long, 0.5 mm i.d.). After that, an air flow was introduced to remove the residual solution from the KR and the eluate delivery tube, then the adsorbed analyte chelate was quantitatively eluted into a delivery tube with 50 μl of ethanol. An air flow was used to propel the eluent from the eluent loop through the reactor and to introduce all the ethanolic eluate onto the platform of the transversely heated graphite tube atomizer, which was preheated to 80°C. With the use of the new FI manifold, the consumption of eluent was greatly reduced and dispersion was minimized. The adsorption efficiency was 58%, and the enhancement factor was 142 in the concentration range 0.01–0.05 μg l⁻¹ Pb at a sample loading rate of 6.8 ml min⁻¹ with 60 s preconcentration time. For the range 0.1–2.0 μg l⁻¹ of Pb a loading rate of 3.0 ml min⁻¹ and 30 s preconcentration time were chosen, resulting in an adsorption efficiency of 42% and an enhancement factor of 21, respectively. A detection limit (3σ) of 2.2 ng l⁻¹ of lead was obtained using a sample loading rate of 6.8 ml min⁻¹ and 60 s preconcentration. The relative standard deviation of the entire procedure was 4.9% at the 0.01 μg l⁻¹ Pb level with a loading rate of 6.8 ml min⁻¹ and 60 s preconcentration, and 2.9% at the 0.5 μg l⁻¹ Pb level with a 3.0 ml min⁻¹ loading rate and 30 s preconcentration. Efficient washing of the matrix from the reactor was critical, requiring the use of the standard addition method for seawater samples. The analytical results obtained for seawater and river water standard reference materials were in good agreement with the certified values.     

Kinetic study of gas-phase Lu(D3/2) with O2, N2O and CO2

The second-order rate constants of gas-phase Lu(²D_3/2) with O₂, N₂O and CO₂ from 348 to 573 K are reported. In all cases, the reactions are relatively fast with small barriers. The disappearance rates are independent of total pressure indicating bimolecular abstraction processes. The bimolecular rate constants (in molecule⁻¹ cm³ s⁻¹) are described in Arrhenius form by k(O₂)=(2.3±0.4)×10⁻¹⁰exp(−3.1±0.7 kJmol⁻¹/RT), k(N₂O)=(2.2±0.4)×10⁻¹⁰exp(−7.1±0.8 kJmol⁻¹/RT), k(CO₂)=(2.0±0.6)×10⁻¹⁰exp(−7.6±1.3 kJmol⁻¹/RT), where the uncertainties are ±2σ.     

Strahlenchemie von alkoholen—IX Die UV-photolyse (λ = 185 nm) von methanol in flüssiger phase

The UV photolysis (λ = 185 nm) of liquid methanol yields hydrogen, glycol, formaldehyde, methane and traces of ethane in quantum yields of 0·83, 0·78, 0·058, 0·05 and 0·002 resp. (related to φ(H₂) = 0·4 of the ethanol-actinometer (5 mole/1 in water)). The isotopic distribution of the hydrogen (85% HD) formed in the photolysis of CH₃OD shows, that as in the gasphase² the scission of the O---H-bond (1) is the major process. CH₃OH + hv (λ = 185 nm) → CH₃O^• + H^• (1)

In methanoi-water mixtures (nearly all the light of the wavelength λ = 185 nm is absorbed by methanol) the quantum yields of hydrogen, glycol, methane and ethane are greatly reduced, while the formaldehyde yield remains unaffected. In 1 molar solution φ(H₂) = 0·42, φ(glycol) = 0·32 and φ(CH₄) = 6 x 10⁻⁴ is obtained. Ethane cannot be detected.     

Are excimers formed along with hydrated electrons in the UV excitation of cyanocuprate(I) ions in aqueous solution?

The three cyanocuprate(I) complexes, Cu(CN)₂⁻, Cu(CN)₃²⁻, and Cu(CN)₄³⁻, photoeject electrons with high efficiency when excited in aqueous solution by 266 nm laser pulses of 7 ns duration with quantum yields of 0.37±0.06, 0.224±0.021, and 0.240±0.005, for Cu(CN)₂⁻ (at 2 M ionic strength), Cu(CN)₃²⁻, and Cu(CN)₄³⁻ (both measured at 1 M ionic strength). Along with hydrated electrons, two transient intermediates, absorbing at 460 and 340 nm, respectively, form consecutively after excitation through bimolecular reactions with ground-state Cu(I) in solutions of Cu(CN)₂⁻, and Cu(CN)₃²⁻, but not in Cu(CN)₄³⁻. All photoprocesses are essentially monophotonic. A mechanism is proposed that suggests the formation of a dinuclear excited-state complex such as an excimer.     

Calorimetric glass transitions in the amorphous forms of water: a comparison

The calorimetric glass transition behaviour in the amorphous forms of water is reviewed: for a heating rate of 30 K min⁻¹ the onset temperature, or T_g, of the glass transition is 136±1 K for hyperquenched glassy water and annealed vapour-deposited amorphous solid water, and 129±1 K for the low-density form of pressure-amorphized hexagonal ice. The increase in heat capacity in the glass transition region is between 1.6–2 J K⁻ mol⁻ for the three amorphous forms. Annealing of the samples a few degrees below T_g or heating several degrees above the glass transition region has no influence on the onset temperatures at 136 K and 129 K respectively, which is contrary to ‘normal’ behaviour. The results are discussed with respect to the ‘structure’ of the three amorphous forms of water below the glass transition region and a “gel-like” state of water above T_g.     

The fate of As, Pb, Cd, Cr and Mn in a coal during pyrolysis

Transformation of As, Pb, Cd, Cr, and Mn in Chinese Datong coal during pyrolysis was studied. Experiments were carried out in a fixed-bed quartz reactor with a heating rate of 20 °C min⁻¹. Effects of the final temperature (300–1000 °C) and atmosphere (N₂ and H₂ at 0.1 MPa) were examined. Chemical form distribution of the elements in the coal and coal-derived chars (obtained at 1000 °C under N₂ and H₂) was investigated. As, Pb, Cr, Cd, and Mn in the coal and the chars were classified into five chemical forms (ion exchangeable, bound to carbonates, bound to Fe–Mn oxides, bound to organic matter, and in the residue) by a sequential dissolution method. Results show that As, Pb, and Cd are more volatile and tend to enrich in the volatile phase in the pyrolysis. Cr and Mn are relative non-volatile and tend to enrich in the solid phase. H₂ atmosphere promotes the release of the elements. The elements in all the five chemical forms undergo transformation in pyrolysis, and As, Pb, Cr and Cd show similar behavior.     

Thermal and spectroscopic investigation of europium and samarium sulphates hydrates by TG-FTIR and ICP-MS techniques

The investigation of europium(III) sulphate hydrate and samarium(III) sulphate hydrate was performed by thermal analysis (TG-DTG) and simultaneous infrared evolved gas analysis-Fourier transformed infrared (EGA-FTIR) spectroscopy. The TG, DTG and DTA curves were recorded at the 25–1400 °C in the dynamic air atmosphere by TG/DTA analyser. The infrared evolved gas analysis was obtained on the FTIR spectrometer. Eu₂(SO₄)₃·nH₂O (n = 3.97) and Sm₂(SO₄)₃·nH₂O (n = 8.11) were analysed, the dehydration and decomposition steps were investigated and the water content was calculated. The formation of different oxysulphates was studied.

The trace rare earth elements in Eu and Sm sulphates were determined by ICP-MS. The concentration of trace Eu, Sm, La, Gd, Y and Ce ranged from 3.9 × 10⁻⁶ to 1.5 × 10⁻⁴% (m/m).     

A new study of the enzymatic hydrolysis of carboxymethyl cellulose with a bulk acoustic wave sensor

A new bulk acoustic wave (BAW) cellulase sensing technique, which is based on the enzymatic hydrolysis process of sodium carboxymethylcellulose (CMC) by cellulase, was established. The frequency shift curves of BAW sensor indicated that the viscosity of the tested solutions decreased during the hydrolysis process. The hydrolysis rate of CMC by cellulase was calculated from the frequency shift curves. The hydrolysis rate of CMC under different pH conditions at 30°C showed that cellulase had high hydrolysis ability approximately at pH 5.0. Kinetic parameters (the Michaelis constant K_m and the maximum rate V_max) of the process were estimated by using a linear method of Lineweaver–Burk plot. K_m is 1.95±0.25 mg ml⁻¹ and V_max is −(4.25±0.58)×10⁻³ g^1/2 cm^−3/2 cP^1/2 min⁻¹. Also the activation energy (E_a) of the enzymatic hydrolysis, with a value of 51.99±1.26 kJ mol⁻¹, was estimated in this work.     

Tuning the parameters for fast respirometry

The aerobic bacterial respiration rate is an indicator of microbial growth and metabolism, essential for monitoring the oxidation process and organic load content of samples in a diverse field of application from influent streams in wastewater treatment facilities to industrial fermentations. This paper looks at the influence of parameters, such as culture concentration and volume, sample surface area/volume ratio and headspace volume to achieve optimisation of respirometry measurement and thus design a bench-top respirometric device, based on the monitoring of the pressure changes in a closed chamber where a bacterial culture is allowed to respire in contact with a sample. Contrary to traditional respirometry, the goal is detection of bacterial respiration within 5 min in a minimal sample volume. Both qualitative and quantitative data could be derived using a simple equation and fine-tuning of the micro-manometric parameters of the device, with a most important finding being that minimal headspace volume in combination with elevated bacterial populations maximised absolute pressure change response and favoured high sensitivity at short response time, even though the conditions indicated oxygen-limitation. Furthermore, in comparison with a commercially available respirometer the typical respiration rate of stationary phase P. putida M10 gave oxygen uptake rate (OUR) and specific oxygen uptake rate (SOUR) of 38 μmol l⁻¹ min⁻¹ and 5 μmol g⁻¹ min⁻¹, respectively with the ‘classical’ system, while the μ-Warburg device designed here showed a typical response, for the culture with the same dry cell concentration, of 66 μmol l⁻¹ min⁻¹ for the OUR and 9 μmol g⁻¹ min⁻¹ for the SOUR. The remarkable outcome from this data, therefore, is that it appears that the high surface area/volume geometry of the μ-Warburg device design has achieved less respiration limitation, even though the sample is unstirred. This presents important insight regarding future respirometer design.     

Structural stabilities of sulfonated manganese tetramesitylporphyrin and its β-brominated analogue toward NaOCl, H2O2 and (CH3)3COOH

This article gives the degradation rate constants of meso-tetrakis(3,5-disulfonatomesityl)porphinatomanganese(III) X (where X=H₂O and/or OH⁻ depending on pH) (MnTMSP) and its β-brominated analogue (MnTMSPBr₈) toward the oxidants NaOCl, H₂O₂, and (CH₃)₃COOH at various pHs, I=0.2 M and 30°C. In addition, the degradation rate constants of MnTMSP was determined when it was bound to cationic supports — namely, CTAB, a poly(vinylbenzyltrimethylammonium chloride) latex, 2,6-ionene and 2,10-ionene. MnTMSP showed high structural stability toward the peroxides in strong acidic medium and the degradation rate constants were found as low as 10⁻⁴ min⁻¹ at pH<1.50. When NaOCl was employed as the oxidant, the pH dependence of the stability of MnTMSP was vice versa and its degradation rate constant was determined as 1.43×10⁻⁴ min⁻¹ at pH 14.10. In strong acidic solution, the supports CTAB and latex made the stability of MnTMSP toward the peroxides improve significantly. In strong basic solution, only latex-bound MnTMSP showed higher stability toward NaOCl than the homogeneous MnTMSP. Because MnTMSPBr₈ was not stable in solutions having pH higher than 9 and containing no oxidant, its stability was investigated at pH<9 and it showed slightly lower stability toward the peroxides than the non-brominated analogue.     

The measurement of oxygen consumption and ventilation volume of draught animals using a modified Oxylog

This paper describes how the Oxylog, an apparatus for measuring the respiratory ventilation volume and oxygen consumption of ambulatory human beings which is manufactured by Morgan, Kent, UK has been adapted for use with draught animals up to 500 kg live weight. Modifications included a suitable face mask which can be made cheaply and easily for animals of different sizes and two types of enlarged flow meters allowing ventilation volume (VV) up to 320 1 min⁻¹ and oxygen consumption (VO₂) up to 131 min⁻¹ to be measured. When tested against a calibrated piston pump, the modified Oxylog performed as well as the original and measured VV and VO₂ to ±1%. Determinations of VO₂ of a cow agreed to within ±6% with simultaneous measurements obtained from an open circuit, laboratory based respirometric system (average difference 1.5% SD ±3.6, n = 14). Examples are given of results obtained from animals working in the field in Nigeria and Nepal.     

Rate constants for the reaction of OH radicals with CH3CN, C2H5CN AND CH2=CH-CN in the temperature range 298–424 K

Rate constants for the reactions of OH with CH₃CN, CH₃CH₂CN and CH₂=CH-CN have been measured to be 5.86 × 10⁻¹³ exp(−1500 ± 250 cal mole⁻¹/RT), 2.69 × 10⁻¹³ exp(−1590 ± 350 cal mole⁻¹/RT and 4.04 × 10⁻¹² cm³ molecule⁻¹ s⁻¹, respectively in the temperature range 298–424 K. These results are discussed in terms of the atmospheric lifetimes of nitrfles.