铱催化环加成反应的研究进展

过渡金属催化环加成反应是合成单环及多环化合物的重要方法,也是有机化学的研究热点之一.综述了近年来铱催化环加成反应的研究进展,主要包括了[2+2+1],[2+2+2],[4+2],1,3-偶极环加成反应等,及少量关于[3+2+2],[3+2],[5+1]环加成反应的报道,并讨论了部分铱催化环加成反应机理.     

A DFT study of the domino inter

The molecular mechanism of the domino inter [4 + 2]/intra [3 + 2] cycloaddition reactions of nitroalkenes with enol ethers to give nitroso acetal adducts has been characterized using density functional theory methods with the B3LYP functional and the 6-31G basis set. The presence of Lewis acid catalyst and solvent effects has been taken into account to model the experimental environment. These domino processes comprise two consecutive cycloaddition reactions: the first one is an intermolecular [4 + 2] cycloaddition of the enol ether to the nitroalkene to give a nitronate intermediate, which then affords the final nitroso acetal adduct through an intramolecular [3 + 2] cycloaddition reaction. The intermolecular [4 + 2] cycloaddition can be considered as a nucleophilic attack of the enol ether to the conjugated position of the nitroalkene, with concomitant ring closure and without intervention of an intermediate. For this cycloaddition process, the presence of the Lewis acid favors the delocalization of the negative charge that is being transferred from the enol ether to the nitroalkene and decreases the activation energy of the first cycloaddition. The [4 + 2] cycloaddition presents a total regioselectivity, while the endo/exo stereoselectivity depends on the bulk of the Lewis acid used as catalyst. Thus, for small Lewis acid catalyst, modeled by BH(3), the addition presents an endo selectivity. The [3 + 2] cycloaddition reactions present an total exo selectivity, due to the constraints imposed by the tether. Inclusion of Lewis acid catalyst and solvent effects decrease clearly the barrier for the first [4 + 2] cycloaddition relative to the second [3 + 2] one. Calculations for the activation parameters along this domino reaction allow to validate the results obtained using the potential energy barriers.     

Sequential cycloaddition approach to the tricyclic core of vibsanin E. Total synthesis of (+/-)-5-epi-10-epi-vibsanin E

[chemical reaction: see text]. A direct access to (+/-)-5-epi-10-epi-vibsanin E is described, based on three key cycloaddition steps, a rhodium-catalyzed [4 + 3] cycloaddition, a heteronuclear [4 + 2] cycloaddition, and a photochemically induced [4 + 2] cycloaddition.     

Palladium-catalyzed [3 + 3] cycloaddition of trimethylenemethane with azomethine imines

A palladium-catalyzed [3 + 3] cycloaddition of trimethylenemethane (TMM) with azomethine imines has been developed to produce hexahydropyridazine derivatives under simple and mild conditions. The use of substituted TMM precursors highlights the difference of this system from previously reported [3 + 2] cycloaddition of TMMs under palladium catalysis. The present [3 + 3] cycloaddition reactions are also applicable to couplings with nitrones.     

Asymmetric Brønsted Base Catalyzed and Directed [3+2] Cycloaddition of 2‐Acyl Cycloheptatrienes with Azomethine Ylides

Conjugated cyclic trienes have the potential for different types of cycloaddition reactions. In the present work, we will, in a novel asymmetric cycloaddition reaction, demonstrate that the organocatalytic reaction of 2‐acyl cycloheptatrienes with azomethine ylides proceeds as a [3+2] cycloaddition, which is in contrast to the Lewis acid‐catalyzed reaction, in which a [3+6] cycloaddition takes place. In the presence of a chiral organosuperbase, 2‐acyl cycloheptatrienes react in a highly enantioselective manner in the [3+2] cycloaddition with azomethine ylides, providing the 1,3‐dipolar cycloaddition product in high yields and up to 99 % ee. It is also shown that the diene formed by the reaction can undergo stereoselective dihydroxylation, bromination, and cycloaddition reactions. Finally, based on experimental observations, some mechanistic considerations are discussed.     

Reaction mechanism and chemoselectivity of intermolecular cycloaddition reactions between phenyl-substituted cyclopropenone ketal and methyl vinyl ketone

In this paper, the mechanisms of the intermolecular [3+2] and [1+2] cycloaddition reactions of 1,1/1,3-dipolar π-delocalized singlet vinylcarbenes, which is obtained from cyclopropenone, with an electron-deficient C═O or C═C dipolarophile, to generate five-membered ring products are first disclosed by the density functional theory (DFT). Four reaction pathways, including two concerted [3+2] cycloaddition reaction pathways and two stepwise reaction pathways (an initial [1+2] cycloaddition and then a rearrangement from the [1+2] cycloadducts to the final [3+2] cycloadducts), are investigated at the B3LYP/6-31G(d,p) level of theory. The calculated results reveal that, in contrast to the concerted C═O [3+2] cycloaddition reaction pathway, which is 7.1 kcal/mol more energetically preferred compared with its stepwise reaction pathway, the C═C dipolarophile favors undergoing [1+2] cycloaddition rather than concerted [3+2] cycloaddition (difference of 5.3 kcal/mol). The lowest free energy barrier of the C═O concerted [3+2] cycloaddition reaction pathway shows that it predominates all other reaction pathways. This observation is consistent with the finding that the C═O [3 + 2] cycloadduct is the main product under experimental conditions. In addition, natural bond orbital second-order perturbation charge analyses are carried out to explain the preferred chemoselectivity of C═O to the C═C dipolarophile and the origins of cis-stereoselectivity for C═C [1+2] cycloaddition. Solvent effects are further considered at the B3LYP/6-31G(d,p) level in the solvents CH(3)CN, DMF, THF, CH(2)Cl(2), toluene, and benzene using the PCM model. The results indicate that the relative reaction trends and the main products are insensitive to the polarity of the reaction solvent.     

A theoretical study of the reaction of alkynylboranes with butadiene: competition between cycloaddition and alkynylboration

The reactions of alkynyldihaloboranes and alkynyldialkylboranes with butadiene have been explored by using DFT methods at the B3LYP level with the 6-31G basis set. Transition structures for the concerted [4+2] cycloaddition have been found for the alkynylborane derivatives. Along with these, another reactive pathway has been found for the cycloaddition process with transition structures of high [4+3] character. The transition structures for the 1,4-alkynylboration processes have also been found. The geometries computed for the cycloaddition transition structure with high [4+3] character and the 1,4-alkynylboration transition structures are surprisingly similar though leading to different products. IRC calculations suggest that the [4+3] cycloaddition and alkynylboration pathways are associated by a zwitterionic structure.     

Catalytic (3+2) Palladium‐Aminoallyl Cycloaddition with Conjugated Dienes

We describe the design and application of tailored aminoallyl precursors for catalytic (3+2) cycloaddition with conjugated dienes via a Pd‐aminoallyl intermediate. The new cycloaddition reactions override the conventional (4+3) selectivity of aminoallyl cation cycloaddition through a sequence of Pd‐allyl transfer and ring closure. A variety of highly substituted or fused pyrrolidine rings were synthesized using the cycloaddition, and can further undergo [1,3] N‐to‐C rearrangement to five‐membered carbocycles with a different palladium catalyst. The utility of the (3+2) cycloaddition is also demonstrated by the preparation of various derivatives from the bicyclic pyrrolidine products.     

3 + 2] cycloaddition reactions of 4-alkyl-3-hydroxy-2H-pyrazolo[4,3-c]isoquinolinium inner salts

Heating dipolarophiles with 4-alkyl-3-hydroxy-2H-pyrazolo[4,3-c]isoquinolinium hydroxide inner salts results in [3 + 2] cycloaddition across positions 3a and 5 of the aromatic system to give the [3 + 2] cycloadducts in good yield. When the 4-alkyl substituent is a 2-acetate ester and the methylene group can be deprotonated, a second mode of [3 + 2] cycloaddition becomes available for the resulting anion (across the side chain methine group and position 5 of the aromatic system) and occurs under basic conditions, allowing either of two modes of [3 + 2] cycloaddition to be selected by appropriate choice of reaction conditions.     

Mechanism, regioselectivity, and the kinetics of phosphine-catalyzed [3+2] cycloaddition reactions of allenoates and electron-deficient alkenes

With the aid of computations and experiments, the detailed mechanism of the phosphine-catalyzed [3+2] cycloaddition reactions of allenoates and electron-deficient alkenes has been investigated. It was found that this reaction includes four consecutive processes: 1) In situ generation of a 1,3-dipole from allenoate and phosphine, 2) stepwise [3+2] cycloaddition, 3) a water-catalyzed [1,2]-hydrogen shift, and 4) elimination of the phosphine catalyst. In situ generation of the 1,3-dipole is key to all nucleophilic phosphine-catalyzed reactions. Through a kinetic study we have shown that the generation of the 1,3-dipole is the rate-determining step of the phosphine-catalyzed [3+2] cycloaddition reaction of allenoates and electron-deficient alkenes. DFT calculations and FMO analysis revealed that an electron-withdrawing group is required in the allene to ensure the generation of the 1,3-dipole kinetically and thermodynamically. Atoms-in-molecules (AIM) theory was used to analyze the stability of the 1,3-dipole. The regioselectivity of the [3+2] cycloaddition can be rationalized very well by FMO and AIM theories. Isotopic labeling experiments combined with DFT calculations showed that the commonly accepted intramolecular [1,2]-proton shift should be corrected to a water-catalyzed [1,2]-proton shift. Additional isotopic labeling experiments of the hetero-[3+2] cycloaddition of allenoates and electron-deficient imines further support this finding. This investigation has also been extended to the study of the phosphine-catalyzed [3+2] cycloaddition reaction of alkynoates as the three-carbon synthon, which showed that the generation of the 1,3-dipole in this reaction also occurs by a water-catalyzed process.     

Hetero [6+3] cycloaddition of fulvenes with N-alkylidene glycine esters: a facile synthesis of the delavayine and incarvillateine framework

[reaction: see text] In contrast to the [3+2] or [4+3] cycloaddition of N-metalated azomethine ylides and various alkenes, N-benzylidene glycine ethyl ester reacts with fulvenes to give the hetero [6+3] cycloaddition adducts with high stereoselectivity, constituting an efficient and novel route to [2]pyrindines.     

Intramolecular [2+2+2] cycloaddition reactions of yne-ene-yne and yne-yne-ene enediynes catalysed by Rh(I): experimental and theoretical mechanistic studies

N-tosyl-linked open-chain yne-ene-yne enediynes 1 and 2 and yne-yne-ene enediynes 3 and 4 have been satisfactorily synthesised. The [2+2+2] cycloaddition process catalysed by the Wilkinson catalyst [RhCl(PPh(3))(3)] was tested with the above-mentioned substrates resulting in the production of high yields of the cycloadducts. Enediynes 1 and 2 gave standard [2+2+2] cycloaddition reactions whereas enediynes 3 and 4 suffered β-hydride elimination followed by reductive elimination of the Wilkinson catalyst to give cycloadducts, which are isomers of those that would be obtained by standard [2+2+2] cycloaddition reactions. The different reactivities of these two types of enediyne have been rationalised by density functional theory calculations.     

An exploratory study of type II [3 + 4] cycloadditions between vinylcarbenoids and dienes

The intramolecular type II [3 + 4] cycloaddition between vinylcarbenoids and furans is a practical method for the construction of 5-oxo-10-oxatricyclo[6.2.1.0(4,9)]undeca-3, 8(11)-dienes, containing two anti-Bredt double bonds. These tricyclic systems are well functionalized for eventual elaboration to the natural product CP-263,114. The rhodium-stabilized vinylcarbenoids are generated by dirhodium tetracarboxylate catalyzed decomposition of vinyldiazoacetates. The [3 + 4] cycloaddition is generally considered to occur by a tandem cyclopropanation/Cope rearrangement, although evidence is presented that with these substrates the [3 + 4] cycloaddition may occur in a concerted manner.     

Cycloaddition to a C3-ethynylated chlorophyll derivative and self-aggregation of zinc chlorin–pyrazole/triazole conjugates

Several kinds of cycloaddition reactions were applied to C3-ethynylated pyropheophorbide-a methyl ester to develop C3-functionalized chlorophyll derivatives. Its [2+2] cycloaddition with tetracyanoethylene, [2+3] cycloaddition with diazomethane, [2+3] Huisgen reaction with trimethylsilyl azide, and [2+4] Diels–Alder reaction with tetraphenylcyclopentadienone gave the expected products in moderate to high yields. Zinc complex of the resulting 3-pyrazolyl-chlorin was found to show self-aggregation in a less polar solvent, in an aqueous micelle, and in the solid thin films more readily than the corresponding zinc 3-triazolyl-chlorin.     

Tetronamides as latent acyclic vinylogous amides in formal aza-[3 + 3] cycloaddition reactions with alpha,beta-unsaturated iminium salts. An unexpected rearrangement and an approach to synthesis of substituted piperidines

A detailed account regarding formal aza-[3 + 3] cycloaddition reactions of tetronamides with alpha,beta-unsaturated iminium salts is described here. This investigation uncovers regioisomeric cycloadducts that were not found in previous studies involving this formal cycloaddition and an unexpected rearrangement that led to pyridines and dihydropyridines. Both stereochemical and regiochemical issues raised in this study provide further mechanistic insights into this cycloaddition. With careful control of reaction temperatures, the desired formal cycloadducts are obtained. Ensuing transformation of these cycloadducts into functionalized piperidines establishes the concept of employing tetronamides as latent acyclic vinylogous amides for the formal aza-[3 + 3] cycloaddition.     

Intramolecular 4 + 3 cycloadditions. Aspects of stereocontrol in the synthesis of cyclooctanoids. A synthesis of (+)-dactylol

[reaction: see text] The judicious placement of stereocenters on precursors for 4 + 3 cycloaddition reactions can lead to high levels of stereocontrol in the 4 + 3 cycloaddition process of cyclopentenyl cations and tethered butadienes. This concept was successfully tested in the context of a synthesis of (+)-dactylol.     

The Lewis acid-catalyzed [3+1+1] cycloaddition of azomethine ylides with isocyanides

A Lewis acid-catalyzed [3+1+1] cycloaddition reaction between aliphatic isocyanides and azomethine ylides generated in situ from aziridines, leading to pyrrolidine derivatives, has been developed. This reaction proceeds smoothly under mild conditions and can also be modified by employing aromatic isocyanides to generate four-membered heterocycles, azetidines, through a [3+1] cycloaddition reaction.     

Development of a [3+3] cycloaddition strategy toward functionalized piperidines

This paper describes a novel route to functionalized piperidines via a formal [3+3] cycloaddition reaction of activated aziridines and palladium-trimethylenemethane (Pd-TMM) complexes. The cycloaddition reaction generally proceeds enantiospecifically with ring opening at the least hindered site of the aziridine. Therefore, readily available enantiomerically pure 2-substituted aziridines can be utilized to prepare enantiomerically pure 2-substituted piperidines in good to excellent yield. The N-substituent on the aziridine proved to be crucial to the success of this reaction with only 4-toluenesulfonyl (Ts) and 4-methoxybenzenesulfonyl (PMBS) aziridines permitting smooth cycloaddition to take place. Additionally, spirocyclic aziridines have been found to participate in the [3+3] cycloaddition reaction, whereas 2,3-disubstituted aziridines can be applied to provide fused bicyclic piperidines, albeit in low yield.     

Multicomponent domino [4+2]/[3+2] cycloadditions of nitroheteroaromatics: an efficient synthesis of fused nitrogenated polycycles

Activation by high pressure allows 3-nitroindole and 3-nitropyrrole derivatives to behave as electron-poor heterodienes in multicomponent domino [4+2]/[3+2] cycloaddition processes. The primary [4+2] inverse demand cycloaddition appears to be completely endo selective, while the subsequent [3+2] process shows a total facial selectivity, setting the stereochemistry at ring junction, and an endo/exo selectivity depending on the nature of the heterocycle. In two operations, a polycyclic diamine featuring a quaternary center at ring junction is efficiently generated.     

Anion radical [2 + 2] cycloaddition as a mechanistic probe: stoichiometry- and concentration-dependent partitioning of electron-transfer and alkylation pathways in the reaction of the Gilman reagent Me2CuLi.LiI with bis(enones)

Exposure of easily reduced aromatic bis(enones) 1a-1e to the methyl Gilman reagent Me(2)CuLi.LiI at 0 degrees C in tetrahydrofuran solvent provides the products of tandem conjugate addition-Michael cyclization, 2a-2e, along with the products of [2 + 2] cycloaddition, 3a-3e. Complete partitioning of the Gilman alkylation and [2 + 2] cycloaddition pathways may be achieved by adjusting the loading of the Gilman reagent, the rate of addition of the Gilman reagent, and the concentration of the reaction mixture. The Gilman alkylation manifold is favored by the rapid addition of excess Gilman reagent at higher substrate concentrations, while the [2 + 2] cycloaddition manifold is favored by slow addition of the same Gilman reagent at lower concentrations and loadings. Notably, [2 + 2] cycloaddition to form 3a-3e is catalytic in Gilman reagent. Kinetic data reveal that the ratio of 2a and 3a changes such that the cycloaddition pathway becomes dominant upon increased consumption of Gilman reagent. These data suggest a concentration-dependent speciation of the Gilman reagent and differential reactivity of the aggregates present at higher and lower concentrations. While the species present at higher concentration induce Gilman alkylation en route to products 2a-2e, the species present at lower concentration provide products of catalytic [2 + 2] cycloaddition, 3a-3e. Moreover, upon electrochemical reduction of the bis(enones) 1a-1e, or chemically induced single-electron transfer from arene anion radicals, the very same [2 + 2] cycloadducts 3a-3e are formed. The collective data suggest that [2 + 2] cycloadducts 3a-3e arising under Gilman conditions may be products of anion radical chain cyclobutanation that derive via electron transfer (ET) from the Me(2)CuLi.LiI aggregate(s) present at low concentration. These observations provide a link between the Gilman alkylation reaction and related ET chemistry and suggest these reaction paths are mechanistically distinct. This analysis is made possible by the recent observation that easily reduced bis(enones) are subject to intramolecular [2 + 2] cycloaddition upon cathodic reduction or chemically induced ET from arene anion radicals, and is herewith showcased as a novel method of testing for the intermediacy of enone anion radicals.