Hydrogenation of carbon dioxide and aryl isocyanates by a tetranuclear tetrahydrido yttrium complex. Isolation, structures, and CO2 insertion reactions of methylene diolate and mu3-oxo yttrium complexes

The reaction of carbon dioxide with a tetranuclear tetrahydrido yttrium complex [(C5Me4SiMe3)Y(mu-H)]4(L) (L = Me3SiCC(H)C(H)CSiMe3) (1) rapidly afforded the corresponding bis(methylene diolate) complex [(C5Me4SiMe3)Y]4(mu-O2CH2)2(L) (2), while the reactions of an aryl isocyanate with 1 led to selective formation of the mu3-oxo complex [(C5Me4SiMe3)Y]4(mu-O)( mu-H)2(L) (5) or [(C5Me4SiMe3)Y]4(mu-O)2(L) (7), depending on the substrate ratio. Both the methylene diolate and the oxo complexes can undergo CO2 insertion reactions to give the corresponding carbonate complexes. These reactions not only yield a new series of polynuclear yttrium complexes having novel structures but also shed new light on the mechanistic aspects of the heterogeneous hydrogenation of COmicron2. The high reactivity of the polynuclear mu3-oxo yttrium complexes 5 and 7 could also make them novel molecular models for study of metal oxide-supported catalysts.     

Flexible coordination of the carboxylate ligand in tin(II) amides and a 1,3-diaza-2,4-distannacyclobutanediyl

A series of tin(II) amido complexes possessing m-terphenyl carboxylate ligands have been prepared. These complexes, namely [(Me(3)Si)(2)NSn(mu-O(2)CC(6)H(2)Ph(3))](2), [(Me(3)Si)(2)NSn(mu-O(2)CC(6)H(3)Mes(2))](2), and [(Me(3)Si)(2)NSn(mu-O(2)CC(6)H(2)Mes(2)Me)](2) [Mes = 2,4,6-trimethylphenyl], are the first structurally characterized examples of tin(II) carboxylate complexes exhibiting discrete Sn(2)O(4)C(2) heterocyclic cores. Initial reactivity studies led to the isolation of a 1,3-diaza-2,4-distannacyclobutanediyl, [(Mes(2)C(6)H(3)CO(2))Sn(mu-NSiMe(3))](2). This molecule possesses a Sn(2)N(2) heterocyclic core and it was crystallised as both the CH(2)Cl(2) and Et(2)O solvates. Although the tin atoms in this molecule have a formal oxidation state of 3+, preliminary computational studies on this molecule suggest that it is best described as a ground state singlet. Finally, the X-ray crystal structure of (CH(2)Cl)(Cl)Sn[N(SiMe(3))(2)](2), the product of oxidative addition of CH(2)Cl(2) to Sn[N(SiMe(3))(2)](2), is also presented herein.     

Reactions of palladium germylene complexes: formation of sulfide bridges

Reactivity of three novel Pd germylene species is presented. (Et(3)P)(2)PdGe[N(SiMe(3))(2)](2) (1) and (dppe)PdGe[N(SiMe(3))(2)](2) (6) react with COS to give the sulfide bridged species (Et3P)2Pd(mu S)Ge[N(SiMe3)2]2 (2) and (dppe)Pd(mu S)Ge-[N(SiMe3)2]2 (7) (dppe = (diphenylphosphino)ethane). (Ph(3)P)(2)PdGe[N(SiMe(3))(2)](2) (4) reacts with COS to give the disulfide bridged complex (Ph(3)P)(2)Pd(muS)(2)Ge[N(SiMe(3))(2)](2) (5) resulting in Pd-Ge bond cleavage. This phosphine dependent reactivity is explored. Crystal structures of 2, 5, 7, and the dimeric form of complex 2, (8), are reported. In the presence of excess germylene, complexes 2 and 5 are shown to partially regenerate their parent palladium germylene complexes, 1 and 4, respectively, via photolysis or heating.     

Synthesis of (O2CEPh)1- ligands (E = S, Se) by CO2 insertion into lanthanide chalcogen bonds and their utility in forming crystallographically characterizable organoaluminum complexes [Me2Al(mu-O2CEPh)]2

CO(2) inserts into the Sm-S and Sm-Se bonds of [(C(5)Me(5))(2)Sm(mu-EPh)](2) (E = S, Se) to form the first crystallographically characterized (O(2)CEPh)(1-) complexes, [(C(5)Me(5))(2)Sm(mu-O(2)CEPh)](2). These complexes are structurally analogous to [(C(5)Me(5))(2)Sm(mu-O(2)CR)](2) complexes, but they are less soluble. This feature was utilized in the reaction of Me(2)AlCl with [(C(5)Me(5))(2)Sm(mu-O(2)CEPh)](2), which forms crystallographically characterizable [Me(2)Al(mu-O(2)CEPh)](2) complexes. Such complexes could not be isolated from an analogous carboxylate reaction. [(C(5)Me(5))(2)Sm(mu-O(2)CSePh)](2) decarboxylates in THF to form (C(5)Me(5))(2)Sm(SePh)(THF). The loss of CO(2) rather than COSe with formation of (C(5)Me(5))(2)Sm(OPh)(THF) was established by (13)CO(2) studies and independent synthesis of (C(5)Me(5))(2)Sm(OPh)(THF) from (C(5)Me(5))(2)Sm[N(SiMe(3))(2)] and PhOH.     

Two-coordinate d9 complexes. synthesis and oxidation of NHC nickel(I) amides

Reaction of the d9-d9 Ni(I) monochloride dimer, [(IPr)Ni(mu-Cl)]2 (1), with NaN(SiMe3)2 and LiNHAr (Ar = 2,6-diisopropylphenyl) gives the novel monomeric, 2-coordinate Ni(I) complexes (IPr)Ni{N(SiMe3)2} (2) and (IPr)Ni(NHAr) (3). Reaction of 2 with Cp2Fe+ results in its 1-e- oxidation followed by beta-Me elimination to give a base-stabilized iminosilane complex [(IPr)Ni(CH3){kappa1-N(SiMe3)=SiMe2.Et2O}][BArF4] (6). Oxidation of 3 gives [(IPr)Ni(eta3-NHAr)(THF)][BArF4] (4), which upon loss of THF affords dimeric [(IPr)Ni(N,eta3:NHC6iPr2H3)]2[BArF4]2 (5).     

Uranium (III) scorpionates: synthesis and structure of [(TpMe2)2U[N(C6H5)2]] and [(TpMe2)2U[N(SiMe3)2]

Reaction of [(Tp(Me)2)(2)UI] with KNR(2) (R = C(6)H(5), SiMe(3)) in tetrahydrofuran (THF) afforded the monomeric trivalent actinide amide complexes [(Tp(Me)2)(2)U[N(C(6)H(5))(2)]], 1, and [(Tp(Me)2)(2)U[N(SiMe(3))(2)]], 2. The complexes have been fully characterized by spectroscopic methods and their structures were confirmed by X-ray crystallographic studies. In the solid state 1 and 2 exhibit distorted pentagonal bipyramidal geometries. The U-NR(2) bond lengths in both complexes are the same but in complex 2 the greater steric demands of the N(SiMe(3))(2) ligand led to elongated U-N(pz) bonds, especially those opposite the amido ligand.     

Coordination chemistry of silanedithiolato ligands derived from cyclotrisilathiane: synthesis and structures of complexes of iron(II), cobalt(II), palladium(II), copper(I), and silver(I)

The coordination chemistry of chelating silanedithiolato ligands has been investigated on Fe(II), Co(II), Pd(II), Cu(I), and Ag(I). Treatment of M(OAc)(2) (M = Fe, Co, Pd) with cyclotrisilathiane (SSiMe(2))(3) in the presence of Lewis bases resulted in formation of Fe(S(2)SiMe(2))(PMDETA) (1), Fe(S(2)SiMe(2))(Me(3)TACN) (2), Co(S(2)SiMe(2))(PMDETA) (3), and Pd(S(2)SiMe(2))(PEt(3))(2) (4) (PMDETA = N,N,N',N',N' '-pentamethyldiethylenetriamine; Me(3)TACN = 1,4,7-trimethyl-1,4,7-triazacyclononane). The analogous reactions of M(OAc) (M = Cu, Ag) in the presence of PEt(3) gave rise to the dinuclear complexes M(2)[(SSiMe(2))(2)S](PEt(3))(3) [M = Cu (5), Ag (6)]. Complexes were characterized in solution by (1)H, (31)P[(1)H], and (29)Si[(1)H] NMR and in the solid state by single-crystal X-ray diffraction. Mononuclear complexes 1-3 have a four-membered MS(2)Si ring, and these five-coordinate complexes adopt trigonal-bipyramidal (for the PMDETA adducts) or square-pyramidal (for the Me(3)TACN adduct) geometries. In dimer 6, the (SSiMe(2))(2)S(2)(-) silanedithiolato ligand bridges two metal centers, one of which is three-coordinate and the other four-coordinate. The chelating effect of silanedithiolato ligands leads to an increase in the stability of silylated thiolato complexes.     

Heterobimetallic dioxygen activation: synthesis and reactivity of mixed Cu-Pd and Cu-Pt bis(mu-oxo) complexes

Heterobimetallic CuPd and CuPt bis(mu-oxo) complexes have been prepared by the reaction of (PPh3)2MO2 (M=Pd, Pt) with LCu(I) precursors (L=beta-diketiminate and di- and triamine ligands) and characterized by low-temperature UV-vis, resonance Raman, and 1H and 31P[1H] NMR spectroscopy in conjunction with DFT calculations. The complexes decompose upon warming to yield OPPh3, and in one case this was shown to occur by an intramolecular process through crossover experiments using double-labeling (oxo and phosphine). The reactivity of one of the complexes, LMe2Cu(mu-O)2Pt(PPh3)2 (LMe2 = beta-diketiminate), with a variety of reagents including CO2, 2,4-di-tert-butylphenol, 2,4-di-tert-butylphenolate, [NH4][PF6], and dihydroanthracene, was compared to that of homometallic Pt2 and Cu2 counterparts. Unlike typical [Cu2(mu-O)2]2+ cores which have electrophilic oxo groups, the oxo groups in the [Cu(mu-O)2Pt]+ core behave as bases and nucleophiles, similar to previously described Pt2 compounds. In addition, however, the [Cu(mu-O)2Pt]+ core is capable of oxidatively coupling 2,4-di-tert-butylphenol and 2,4-di-tert-butylphenolate. Theoretical evaluation of the electron affinities, basicities, and H-atom transfer kinetics and thermodynamics of the Cu2 and CuM (M=Pd, Pt) cores showed that the latter are more basic and form stronger O-H bonds.     

Synthesis, structures and reactions of lithium complexes of [(o-RCHC6H4)PPh2=NSiMe3]-(R = H, SiMe3) ligands

N-Trimethylsilyl o-methylphenyldiphenylphosphinimine, (o-MeC6H4)PPh2=NSiMe3 (1), was prepared by reaction of Ph2P(Br)=NSiMe3 with o-methylphenyllithium. Treatment of 1 with LiBun and then Me3SiCl afforded (o-Me3SiCH2C6H4)PPh2=NSiMe3 (2). Lithiations of both 1 and 2 with LiBu(n) in the presence of tmen gave crystalline lithium complexes [Li{CH(R)C6H4(PPh(2=NSiMe3)-.tmen](3, R = H; 4, R = SiMe3). From the mother liquor of 4, traces of the tmen-bridged complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}]2(mu-tmen) (5) were obtained. Reaction of 2 with LiBun in Et2O yielded complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}.OEt2] (6). Reaction of lithiated with Me2SiCl2 in a 2:1 molar ratio afforded dimethylsilyl-bridged compound Me2Si[CH2C6H4(PPh2=NSiMe3)-2]2 (7). Lithiation of 7 with two equivalents of LiBun in Et2O yielded [Li2{(CHC6H4(PPh2=NSiMe3)-2)2SiMe2}.0.5OEt2](8.0.5OEt2). Treatment of 4 with PhCN formed a lithium enamide complex [Li{N(SiMe3)C(Ph)CHC6H4(PPh2=NSiMe3)-2}.tmen] (9). Reaction of two equivalents of 5 with 1,4-dicyanobenzene gave a dilithium complex [{Li(OEt2)2}2(1,4-{C(N(SiMe3)CHC6H4(PPh2=NSiMe3)-2}2C6H4)] (10). All compounds were characterised by NMR spectroscopy and elemental analyses. The structures of compounds 2, 3, 5, 6 and 9 have been determined by single crystal X-ray diffraction techniques.     

Cu(I) dinuclear complexes with tripodal ligands vs monodentate donors: triphenylphosphine, thiourea, and pyridine. A 1H NMR titration study

Complexes [PPh3Cu(Tr(Mes,Me))] (1), [PPh3Cu(Tr(Me,o-Py))] (2), and [PPh3Cu(Br(Mes)pz(o-Py))] (3) (Tr(Mes,Me) = hydrotris[1,4-dihydro-3-methyl-4-mesityl-5-thioxo-1,2,4-triazolyl]borate; Tr(Me,o-Py) = hydrotris[1,4-dihydro-4-methyl-3-(2-pyridyl)-5-thioxo-1,2,4-triazolyl]borate; Br(Mes)pz(o-Py) = hydro[bis(thioxotriazolyl)-3-(2-pyridyl)pyrazolyl]borate; PPh3 = triphenylphosphine) were synthesized by the reaction of dinuclear complexes [Cu(Tr(Mes,Me))]2, [Cu(Tr(Me,o-Py))]2, [Cu(Br(Mes)pz(o-Py))]2, and PPh3. 1-3 were characterized by 1H, 13C, and 31P NMR spectroscopy and ESI-mass spectrometry. Crystal structure analyses were performed for 1 and 2. Both complexes crystallize in the triclinic P space group with the metal in a slightly distorted tetrahedral geometry (S3P coordination) bound by a kappa3-S3 ligand and a PPh3 molecule. The solution molecular structures were investigated by means of variable-temperature (210-310 K, CDCl3, 1-2; 200-310 K, CD2Cl2, 3) and NOESY NMR spectroscopy. The solution structures of 1-2 are in accordance with the X-ray structures, and the complexes do not exhibit fluxional behavior. On the other hand, 3 is subject to an equilibrium between two species with a coalescing temperature of approximately 260 K. DFT geometry optimizations suggest that the major species of 3 consists of the Br(Mes)pz(o-Py) ligand bound to Cu(I) in the kappa3-S2H fashion with two C=S groups and a [Cu...H-B] interaction. A PPh3 completes the copper coordination (S2HP coordination). The complex [TuCu(Tr(Mes,Me))] (4) (Tu = thiourea) was crystallized using an excess of Tu with respect to [Cu(Tr(Me,2-Py))]2 (approximately a 6:1 ratio). The metal adopts a distorted tetrahedral geometry with an overall S3H coordination determined by the bound kappa3-S2H ligand (two C=S groups and a [B-H...Cu] interaction) and by a Tu. The reactivity of dinuclear complexes [Cu(Tr(Mes,Me))]2, [Cu(Tr(Me,o-Py))]2, and [Cu(Br(Mes)pz(o-Py))]2 with monodentate ligands was investigated by means of NMR titrations with PPh3, Tu. and pyridine (Py), and formation constants for the adducts [DCu(L)] (D = monodentate donor, L = tripodal ligand) were determined.     

Extremely bulky amido-group 14 element chloride complexes: potential synthons for low oxidation state main group chemistry

The preparation of a series of extremely bulky secondary amines, Ar*N(H)SiR(3) (Ar* = C(6)H(2){C(H)Ph(2)}(2)Me-2,6,4; R(3) = Me(3), MePh(2) or Ph(3)) is described. Their deprotonation with either LiBu(n), NaH or KH yields alkali metal amide complexes, several monomeric examples of which, [Li(L){N(SiMe(3))(Ar*)}] (L = OEt(2) or THF), [Na(THF)(3){N(SiMe(3))(Ar*)}] and [K(OEt(2)){N(SiPh(3))(Ar*)], have been crystallographically characterised. Reactions of the lithium amides with germanium, tin or lead dichloride have yielded the first structurally characterised two-coordinate, monomeric amido germanium(II) and tin(II) chloride complexes, [{(SiR(3))(Ar*)N}ECl] (E = Ge or Sn; R = Me or Ph), and a chloride bridged amido-lead(II) dimer, [{[(SiMe(3))(Ar*)N]Pb(μ-Cl)}(2)]. DFT calculations on [{(SiMe(3))(Ar*)N}GeCl] show its HOMO to exhibit Ge lone pair character and its LUMO to encompass its Ge based p-orbital. A series of bulky amido silicon(IV) chloride complexes have also been prepared and several examples, [{(SiR(3))(Ar*)N}SiCl(3)] (R(3) = Me(3), MePh(2)) and [{(SiMe(3))(Ar*)N}SiHCl(2)], were crystallographically characterised. The sterically hindered group 14 complexes reported in this study hold significant potential as precursors for kinetically stabilised low oxidation state and/or low coordination number group 14 complexes.     

The first acetimine gold(I) and gold(III) complexes and the first acetonine complexes

Ketimino(phosphino)gold(I) complexes of the type [Au[NR=C(Me)R']L]X (X = ClO4, R = H, L = PPh3, R'=Me (la), Et (2a); L=PAr3 (Ar=C6H4OMe-4), R'=Me (1b), Et (2b); L=PPh3, R=R'=Me (3); X= CF3SO3 (OTf), L=PPh3, R=R'=Me (3'); R=Ar, R'=Me (4)) have been prepared from [Au(acac)L] (acac = acetyl acetonate) and ammonium salts [RNH3]X dissolved in the appropriate ketone MeC(O)R'. Complexes [Au(NH=CMe2)2]X (X = C1O4 (6), OTf (6')) were obtained from solutions of [Au(NH3)2]X in acetone. The reaction of 6 with PPN[AuCl2] or with PhICl2 gave [AuCl(NH=CMe2)] (7) or [AuCI2(NH=CMe2)2]ClO4 (8), respectively. Complex 7 was oxidized with PhICl2 to give [AuCl3(NH=CMe2)] (9). The reaction of [AuCl(tht)] (tht = tetrahydrothiophene), NaClO4, and ammonia in acetone gave [Au(acetonine)2]ClO4 (10) (acetonine = 2,2,4,4,6-pentamethyl-2,3,4,5-tetrahydropyrimidine) which reacted with PPh3 or with PPN[AuCl2] to give [Au(PPh3)(acetonine)]ClO4 (11) or [AuCl(acetonine)] (12), respectively. Complex 11 reacts with [Au(PPh3)(Me2CO)]ClO4 to give [(AuPPh3)2(mu-acetonine)](ClO4)2 (13). The reaction of AgClO4 with acetonine gave [Ag(acetonine)(OClO3)] (14). The crystal structures of [Au(NH2Ar)(PPh3)]OTf (5), 6' and 10 have been determined.     

Osmabenzenes from the reactions of a dicationic osmabenzyne complex

Treatment of the osmabenzyne Os([triple bond]CC(SiMe(3))=C(Me)C(SiMe(3))=CH)Cl(2)(PPh(3))(2) (1) with 2,2'-bipyridine (bipy) and thallium triflate (TlOTf) produces the thermally stable dicationic osmabenzyne [Os([triple bond]CC(SiMe(3))=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)](OTf)(2) (2). The dicationic osmabenzyne 2 reacts with ROH (R = H, Me) to give osmabenzene complexes [Os(=C(OR)CH=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)]OTf, in which the metallabenzene ring deviates significantly from planarity. In contrast, reaction of the dicationic complex 2 with NaBH(4) produces a cyclopentadienyl complex, presumably through the osmabenzene intermediate [Os(=CHC(SiMe(3))=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)]OTf. The higher thermal stability of [Os(=C(OR)CH=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)]OTf relative to [Os(=CHC(SiMe(3))=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)]OTf can be related to the stabilization effect of the OR groups on the metallacycle. A theoretical study shows that conversion of the dicationic osmabenzyne complex [Os([triple bond]CC(SiMe(3))=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)](OTf)(2) to a carbene complex by reductive elimination is thermodynamically unfavorable. The theoretical study also suggests that the nonplanarity of the osmabenzenes [Os(=C(OR)CH=C(Me)C(SiMe(3))=CH)(bipy)(PPh(3))(2)]OTf is mainly due to electronic reasons.     

Synthesis and structural characterization of two-coordinate low-valent 14-group metal complexes bearing bulky bis(amido)silane ligands

A series of germylene, stannylene and plumbylene complexes [η(2)(N,N)-Me(2)Si(DippN)(2)Ge:] (3a), [η(2)(N,N)-Ph(2)Si(DippN)(2)Ge:] (3b), [η(2)(N,N)-Me(2)Si(DippN)(2)Sn:] (4), [η(2)(N,N)-Me(2)Si(DippN)(2)Pb:](2) (5a), and [η(2)(N,N)-Ph(2)Si(DippN)(2)Pb:] (5b) (Dipp = 2,6-iPr(2)C(6)H(3)) bearing bulky bis(amido)silane ligands were readily prepared either by the transamination of M[N(SiMe(3))(2)](2) (M = Sn, Pb) and [Me(2)Si(DippNH)(2)] or by the metathesis reaction of bislithium bis(amido)silane [η(1)(N),η(1)(N)-R(2)Si(DippNLi)(2)] (R = Me, Ph) with the corresponding metal halides GeCl(2)(dioxane), SnCl(2), and PbCl(2), respectively. Preliminary atom-transfer chemistry involving [η(2)(N,N)-Me(2)Si(DippN)(2)Ge:] (3a) with oxygen yielded a dimeric oxo-bridged germanium complex [η(2)(N,N)-Me(2)Si(DippN)(2)Ge(μ-O)](2) (6). All complexes were characterized by (1)H, (13)C, (119)Sn NMR, IR, and elemental analysis. X-ray single crystal diffraction analysis revealed that the metal centres in 3b, 4, and 5b are sterically protected to prevent interaction between the metal centre and the nitrogen donors of adjacent molecules while complex 5a shows a dimeric feature with a strong intermolecular Pb···N interaction.     

Synthesis of MII[N(SiMe3)2][Me3SiNC(tBu)NSiMe3] (M = Sn,Ge) from amidinate precursors: active catalysts for phenyl isocyanate cyclization

Mixed amidinato amido complexes [Me3SiNC(tBu)NSiMe3]M[N(SiMe3)2] (M = Sn 2, Ge 3) were prepared by the reaction of [Me3SiNC(tBu)NSiMe3]Li (1a) with SnCl2 and GeCl2(dioxane) in ether. The N(SiMe3)2 ligand in these compounds is derived from the rearrangement of the [Me3SiNC(tBu)NSiMe3]- anion with extrusion of tBuCN. The susceptibility of [Me3SiNC(tBu)NSiMe3]- to rearrangement appears to be dependent on reaction solvent and on the coordinated metal center. Single-crystal X-ray diffraction studies of 2 and 3 are presented. Replacement of Me for tBu in the ligand allowed [Me3SiNC(Me)NSiMe3]2SnII (4) to be isolated, and an X-ray structure of this compound is reported. The isolation of 4 indicates that steric factors also play a role in the stability of [Me3SiNC(tBu)NSiMe3]-. Compounds 2 and 3 are outstanding catalysts for the cyclotrimerization of phenyl isocyanates to perhydro-1,3,5-triazine-2,4,6-triones (isocyanurates) at room temperature. In contrast, complex 4 catalytically reacts with phenyl isocyanate to produce isocyanate dimer and trimer in a 52:35 ratio.     

Complexes of an anionic gallium(I) N-heterocyclic carbene analogue with group 14 element(II) fragments: synthetic, structural and theoretical studies

The reactions of the anionic gallium(I) N-heterocyclic carbene (NHC) analogue, [K(tmeda)][:Ga{[N(Ar)C(H)]2}], Ar = C6H3Pri2-2,6, with the heavier group 14 alkene analogues, R2E=ER2, E = Ge or Sn, R = -CH(SiMe3)2, have been carried out. In 2:1 stoichiometries, these lead to the ionic [K(tmeda)][R2EGa{[N(Ar)C(H)]2}] complexes which exhibit long E-Ga bonds. The nature of these bonds has been probed by DFT calculations, and the complexes have been compared to neutral NHC adducts of group 14 dialkyls. The 4:1 reaction of [K(tmeda)][:Ga{[N(Ar)C(H)]2}] with R2Sn=SnR2 leads to the digallyl stannate complex, [K(tmeda)][RSn[Ga{[N(Ar)C(H)]2}]2], presumably via elimination of KR. In contrast, the reaction of the gallium heterocycle with PbR2 affords the digallane4, [Ga{[N(Ar)C(H)]2}]2, via an oxidative coupling reaction. For sake of comparison, the reactions of [K(tmeda)][:Ga{[N(Ar)C(H)]2}] with Ar'2E=EAr'2, E = Ge, Sn or Pb, Ar' = C6H2Pri3-2,4,6, were carried out and led to either no reaction (E = Ge), the formation of [K(tmeda)][Ar'2SnGa{[N(Ar)C(H)]2}] (E = Sn), or the gallium(III) heterocycle, [Ar'Ga{[N(Ar)C(H)]2}] (E = Pb). Salt elimination reactions between [K(tmeda)][:Ga{[N(Ar)C(H)]2}] and the guanidinato group 14 complexes [(Giso)ECl], E = Ge or Sn, Giso = [Pri2NC{N(Ar)}2]-, gave the neutral [(Giso)EGa{[N(Ar)C(H)]2}] complexes. All complexes have been characterized by NMR spectroscopy and X-ray crystallographic studies.     

A series of dinuclear homo- and heterometallic complexes with two or three bridging sulfido ligands derived from the tungsten tris(sulfido) complex [Et(4)N][(Me(2)Tp)WS(3)] (Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate)

The generation of heterobimetallic complexes with two or three bridging sulfido ligands from mononuclear tris(sulfido) complex of tungsten [Et(4)N][(Me(2)Tp)WS(3)] (1; Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate) and organometallic precursors is reported. Treatment of 1 with stoichiometric amounts of metal complexes such as [M(PPh(3))(4)] (M = Pt, Pd), [(PtMe(3))(4)(micro(3)-I)(4)], [M(cod)(PPh(3))(2)][PF(6)] (M = Ir, Rh; cod = 1,5-cyclooctadiene), [Rh(cod)(dppe)][PF(6)] (dppe = Ph(2)PCH(2)CH(2)PPh(2)), [CpIr(MeCN)(3)][PF(6)](2) (Cp = eta(5)-C(5)Me(5)), [CpRu(MeCN)(3)][PF(6)], and [M(CO)(3)(MeCN)(3)] (M = Mo, W) in MeCN or MeCN-THF at room temperature afforded either the doubly bridged complexes [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)M(PPh(3))] (M = Pt (3), Pd (4)), [(Me(2)Tp)W(=S)(micro-S)(2)M(cod)] (M = Ir, Rh (7)), [(Me(2)Tp)W(=S)(micro-S)(2)Rh(dppe)], [(Me(2)Tp)W(=S)(micro-S)(2)RuCp] (10), and [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)W(CO)(3)] (12) or the triply bridged complexes including [(Me(2)Tp)W(micro-S)(3)PtMe(3)] (5), [(Me(2)Tp)W(micro-S)(3)IrCp][PF(6)] (9), and [Et(4)N][(Me(2)Tp)W(micro-S)(3)Mo(CO)(3)] (11), depending on the nature of the incorporated metal fragment. The X-ray analyses have been undertaken to clarify the detailed structures of 3-5, 7, and 9-12.     

Mononuclear (Pd, Pt), heterodinuclear (PdAg, PtAg), and tetranuclear (Pd2Ag2, Pt2Ag2) 1,1-ethylenedithiolato complexes

lp;&-5q;1 The reactions of [Tl2[S2C=C[C(O)Me]2]]n with [MCl2L2] (1:1) or with [MCl2(NCPh)2] and PPh3 (1:1:2) give complexes [M[eta2-S2C=C[C(O)Me]2]L2] [M = Pt, L2 = 1,5-cyclooctadiene (cod) (1); L2 = bpy, M = Pd (2a), Pt (2b), L = PPh3, M = Pd (3a), Pt (3b)] whereas with MCl2 and QCl (2:1:2) anionic derivatives Q2[M[eta2-S2C=C[C(O)Me]2]2] [M = Pd, Q = NMe4 (4a), Ph3P=N=PPh3 (PPN) (4a'), M = Pt, Q = NMe4 (4b)] are produced. Complexes 1 and 3 react with AgClO4 (1:1) to give tetranuclear complexes [[ML2]2Ag2[mu2,eta2-(S,S')-[S2C=C[C(O)Me]2]2]](ClO4)2 [L = PPh3, M = Pd (5a), Pt (5b), L2 = cod, M = Pt (5b')], while the reactions of 3 with AgClO4 and PPh3 (1:1:2) give dinuclear [[M(PPh3)2][Ag(PPh3)2][mu2,eta2-(S,S')-S2C=C[C(O)Me]2]]]ClO4 [M = Pd (6a), Pt (6b)]. The crystal structures of 3a, 3b, 4a, and two crystal forms of 5b have been determined. The two crystal forms of 5b display two [Pt(PPh3)2][mu2,eta2-(S,S')-[S2C=C[C(O)Me]2]2] moieties bridging two Ag(I) centers.     

Synthesis and structures of crystalline Li, Al and Sn(II) 1-azaallyls and beta-diketiminates derived from [Li{mu,eta3-N(SiMe3)C(Ad)C(H)SiMe3}]2 (Ad = 1-adamantyl)

The crystalline dimeric 1-azaallyllithium complex [Li{mu,eta(3-N(SiMe3)C(Ad)C(H)SiMe3}]2 (1) was prepared from equivalent portions of Li[CH(SiMe3)2] and 1-cyanoadamantane (AdCN). Complex was used as precursor to each of the crystalline complexes 2-8 which were obtained in good yield. By 1-azaallyl ligand transfer, 1 afforded (i) [Al{eta3-N(SiMe3)C(Ad)C(H)SiMe3}{kappa1-N(SiMe3)C(Ad)=C(H)SiMe3-E}Me] (5) with [AlCl2Me](2), (ii) [Sn{eta3-N(SiMe3)C(Ad)C(H)SiMe3}2] (7) with Sn[N(SiMe3)2]2, and (iii) [Li(N{C(Ad)=C(H)SiMe3-E}{Si(NN)SiMe3})(thf)2] (8) with the silylene Si[(NCH(2)Bu(t))2C6H(4)-1,2] [= Si(NN)]. By insertion into the C[triple bond, length as m-dash]N bond of the appropriate cyanoarene RCN, gave the beta-diketiminate [Li{mu-N(SiMe3)C(Ad)C(H)C(R)NSiMe3}]2 [R = Ph (2), C(6)H(4)Me-4 (3)], and yielded [Al{kappa2-N(SiMe3)C(Ad)C(H)C(Ph)NSiMe3}{kappa1-N(SiMe3)C(Ad)=C(H)SiMe3-E}Me] (6). The beta-diketiminate [Al{kappa2-N(SiMe3)C(Ad)C(H)C(Ph)NSiMe3}Me2] (4) was prepared from 2 and [AlClMe2]2. The X-ray structures of 1 and 3-8 are presented. Multinuclear NMR spectra in C6D6 or C6D5CD3 have been recorded for each of 1-8; such data on 8 revealed that in solution two minor isomers were also present.     

Gold(I) heteroatom-substituted imido complexes. Amino nitrene loss from

The heteroatom-substituted imido complexes [(LAu)3(mu-NX)]+ (X = NR2, R = Ph, Me, Bz; X = OH, Cl; L = a phosphine) have been prepared from the reactions of NH2X with [(LAu)3(mu-O)]+. Thermally unstable [(LAu)3(mu-NNMe2)]+ (L = P(p-XC6H4)3, X = H, F, Me, Cl, MeO) decompose to the gold cluster [LAu]6(2+) and tetramethyltetrazene Me2NN=NNMe2. The decomposition is first-order overall with a rate constant that increases with increasing pKa of the phosphine ligand. Activation parameters for the decomposition are deltaH(not equal to) = 99(4) kJ/mol and deltaS(not equal to) = 18.5(5) J/K.mol for L = PPh3 and deltaH(not equal to) = 78(3) kJ/mol and deltaS(not equal to) = -47(2) J/K.mol for L = P(p-MeOC6H4)3. The decomposition of analogous [(LAu)3(mu-NNBz2)]+ produces bibenzyl, indicative of the release of free amino nitrene Bz2NN.