Reversal of thermal rectification in one-dimensional nonlinear composite system

Using nonequilibrium molecular dynamics simulations, a comprehensive study of the asymmetric heat conduction in the composite system consisting of the Frenkel-Kontorova （FK） model and Fermi-Pasta-Ulam （FPU） model is conducted. The calculated results show that in a larger system, the rectifying direction can be reversed only by adjusting the thermal bias. Moreover, the rectification reversal depends critically on the system size and the properties of the interface. The mechanisms of the two types of asymmetric heat conduction induced by nonlinearity are discussed. Considering the novel asymmetric heat conduction in the system, it may possess possible applications to manage the thermal rectification in situ directionally without re-building the structure.     

Nonlinear dynamic characteristics and optimal control of a giant magnetostrictive film-shaped memory alloy composite plate subjected to in-plane stochastic excitation

The nonlinear dynamic characteristics and optimal control of a giant magnetostrictive film(GMF)-shaped memory alloy(SMA) composite plate subjected to in-plane stochastic excitation are studied. GMF is prepared based on an SMA plate, and combined into a GMF–SMA composite plate. The Van der Pol item is improved to explain the hysteretic phenomena of GMF and SMA, and the nonlinear dynamics model of a GMF–SMA composite cantilever plate subjected to in-plane stochastic excitation is developed. The stochastic stability of the system is analyzed, and the steady-state probability density function of the dynamic response of the system is obtained. The condition of stochastic Hopf bifurcation is discussed, the reliability function of the system is provided, and then the probability density of the first-passage time is given. Finally, the stochastic optimal control strategy is proposed by the stochastic dynamic programming method.Numerical simulation shows that the stability of the trivial solution varies with bifurcation parameters, and stochastic Hopf bifurcation appears in the process; the system’s reliability is improved through stochastic optimal control, and the firstpassage time is delayed. A GMF–SMA composite plate combines the advantages of GMF and SMA, and can reduce vibration through passive control and active control effectively. The results are helpful for the engineering applications of GMF–SMA composite plates.     

A novel orthogonally linearly polarized Nd:YVO4 laser

<正>We presented a novel orthogonally linearly polarized Nd:YVO₄ laser.Two pieces of a-cut grown-together composite YVO₄/Nd:YVO₄ crystals were placed in the resonant cavity with the c-axis of the two crystals orthogonally.The polarization and power performance of the orthogonally polarized laser were investigated.A 26.2-W orthogonally linearly polarized laser was obtained.The power ratio between the two orthogonally polarized lasers was varied with the pump power caused by the polarized mode coupling.The longitudinal modes competition and the corresponding variable optical beats were also observed from the orthogonally polarized laser.We also adjusted the crystals with their c-axis parallele to each other,and a 40.7-W linearly polarized TEMoo laser was obtained,and the beam quality factors were M_x²=1.37 and M_y² =1.25.     

Effects of BaCu（B2Os） addition on sintering temperature and microwave dielectric properties of BasNb4O15-BaWO4 ceramics

The effects of BaCu（B2Os） （BCB） addition on the microstructure, phase formation, and microwave dielectric proper- ties of BasNb4015-BaWO4 ceramic are investigated. As a sintering aid, BaCu（B2Os） ceramic could effectively lower the sintering temperature of BasNb4015-BaWO4 ceramic from 1100 ℃ to 950 ℃ due to the liquid-phase effect. Meanwhile, BaCu（B2Os） addition effectively improves the densification of BasNb4015-BaWO4 ceramic and significantly influences the microwave dielectric properties. X-ray diffraction analysis reveals that BasNb4015 and BaWO4 coexist with no crystal phase of BaCu（B2Os） in the sintered ceramics. The BasNb4015-BaWO4 ceramics with 1.0 wt% BaCu（B2Os） sintered at 950 ℃ for 2 h presents good microwave dielectric properties of er = 19.0, high Q× f of 33802 GHz and low vf of 2.5 ppm/℃.     

高磁导率材料FeCuNbSiB对超磁致伸缩/压电层合材料磁电性能的影响

采用超磁致伸缩材料TbxDy_1-xFe₂(x≈0.3)(Terfenol-D)、压电材料PbZrxTi_1-xO₃(PZT)和高磁导率材料FeCuNbSiB构造了新型的层合结构.由于引入高磁导率材料FeCuNbSiB改变了Terfenol-D的内部磁场分布,并且在磁场作用下,FeCuNbSiB发生形变对Terfenol-D产生应力,增大了Terfeno 关键词： 磁电效应 磁致伸缩材料 压电材料 高磁导率材料     

FeCuNbSiB对FeNi/PZT复合结构磁电效应的影响

构造了FeCuNbSiB/FeNi/PZT磁电复合结构并与FeNi/PZT复合结构进行了对比研究.分析了高磁导率材料FeCuNbSiB对FeNi磁场的影响机理,研究了FeCuNbSiB/FeNi/PZT三相复合结构的磁电效应.实验表明,在FeNi/PZT两相层合结构中黏接FeCuNbSiB层后:1)最优偏置磁场从200 Oe降低到55 Oe,最大谐振磁电电压系数从1.59 V/Oe增大到2.77 V/Oe;2)在低偏置磁场中,层合结构磁电电压转换系数提高了1.7—7.8倍;3)层合结构的磁电电压对静态磁场 关键词： 层合结构 最优偏置磁场 高磁导率 磁电电压转换系数     

DNA介导复合膜中[Ru(bpy)3]2+与Cu(Ⅱ)间光诱导电子转移

由于DNA与[Ru(bpy)₃]2+(bpy=2,2′-联吡啶)及Cu2+间的静电作用,用自铸膜法在铟锡氧化物(ITO)上制备了橙红色[Ru(bpy)₃]2+-DNA-Cu2+复合膜,并应用稳态和暂态荧光光谱、紫外可见光谱、荧光显微镜和扫描电镜对复合膜进行了表征和DNA介导的光诱导电子转移(PET)研究。结果表明,[Ru(bpy)₃]2+-DNA-Cu2+复合膜(摩尔比为10∶20∶1)呈现了明显的吸收特征峰(450 nm)和发射峰(λ_em=595 nm),发光呈单指数衰减,发光寿命为188.6 ns,Cu2+通过DNA介导PET机制猝灭[Ru(bpy)₃]2+发光,猝灭常数为6.94×103 L·mol-1,猝灭速率常数为3.80×1010 L·mol-1·s-1;复合膜中Cu2+摩尔比(10倍)的增大使发射峰蓝移了11 nm,吸收和发射强度衰减至消失,Cu2+通过静态猝灭机制削弱[Ru(bpy)₃]2+发光。此外,对比于溶液和复合膜中Cu2+对[Ru(bpy)₂(tatp)]2+-DNA(tatp=1,4,8,9-四氮三苯)的发光调控,Cu2+仅能因静电作用猝灭复合膜中[Ru(bpy)₃]2+的发光。     

First-Principles Calculations of Atomic and Electronic Properties of T1 and In on Si（111）

The atomic and electronic structures of T1 and In on Si（111） surfaces are investigated using the firstprinciples total energy calculations. Total energy optimizations show that the energetically favored structure is 1/3 ML T1 adsorbed at the T4 sites on Si（111） surfaces. The adsorption energy difference of one T1 adatom between （√3 × √3） and （1 × 1） is less than that of each In adatom. The DOS indicates that TI 6p and Si 3p electrons play a very important role in the formation of the surface states. It is concluded that the bonding of TI adatoms on Si（111） surfaces is mainly polar covalent, which is weaker than that of In on Si（111）. So T1 atom is more easy to be migrated than In atom in the same external electric field and the structures of T1 on Si（111） is prone to switch between （√3 × √3） and （1 × 1）.     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

Synchronization in a Mutualism Ecosystem Induced by Noise Correlation

Understanding the cause of the synchronization of population evolution is an important issue for ecological improvement. Here we present a Lotka-Volterra-type model driven by two correlated environmental noises and show, via theoretical analysis and direct simulation, that noise correlation can induce a synchronization of the mutualists. The time series of mutual species exhibit a chaotic-like fluctuation, which is independent of the noise correlation, however, the chaotic fluctuation of mutual species ratio decreases with the noise correlation. A quantitative parameter defined for characterizing chaotic fluctuation provides a good approach to measure when the complete synchronization happens.     

Metric of States

Metric of quantum states plays an important role in quantum information theory. In this letter, we find the deep connection between quantum logic theory and quantum information theory. Using the method of quantum logic, we can get a famous inequality in quantum information theory, and we answer a question raised by S. Gudder.     

Remarks on interpretations of the Eotvos experiment and misinterpretation of E=mc^2

The Eotvos experiment on the verification of equivalence between inertial mass and gravitational mass of a body is famous for its accuracy. A question is, however, can these experimental results be applied to the case of a physical space in general relativity, where the space coordinates could be arbitrary？ It is pointed out that it can be validly applied because it has been proven that Einstein＇s equivalence principle for a physical space must have a frame of reference with the Euclidean-like structure. Will claimed further that such an overall accuracy can be translated into an accuracy of the equivalence between inertial mass and each type of energy. It is shown that, according to general relativity, such a claim is incorrect. The root of this problem is due to an inadequate understanding of special relativity that produced the famous equation E=mc^2, which must be understood in terms of energy conservation. Concurrently, it is pointed out that this error is a problem in Will＇s book, ‘Theory and Experiment in Gravitational Physics＇.     

Design and construction progress of BRIF

A new RIB project, the Beijing Radioactive Ion-beam Facility （BRIF）, has been running at CIAE since 2004. In this project, a 100 MeV H-cyclotron, CYCIAE-100, is selected as the driving accelerator providing a 75-100 MeV, 200-500 μA proton beam. An ISOL system employs two stage separators to reach the mass resolution of 20000. Its RIB beam will be injected into the existing Tandem and a superconducting booster installed down stream of the Tandem will increase the energy by 2 MeV/q. The progress of BRIF, giving special emphasis to CYCIAE-100, will be introduced in this paper.     

D^0D^0 mixing and other recent charm results from BABAR

Studies in which BABAR data have shown evidence for mixing in the neutral charm meson system are presented. A new measurement of the lifetime difference parameter ycp = （1.16±0.22±0.18）% is described. Results are also presented from a systematic study of DK and D＊K invariant mass distributions from a 470 fb^-1 sample of asymmetric e^＋e^- interactions recorded by the BABAR detector at the PEP-Ⅱ storage rings. A new charmed-strange meson has been observed with mass [3044 ± 8stat （-5^＋30 ）syst] MeV/c^2 and width [239± 35stat （-42^＋46）syst]MeV/c^2.     

Entropy of Quantum Dynamical Systems and Sufficient Families in Orthomodular Lattices with Bayessian State

The purpose of the present paper is to study the entropy hs（Ф） of a quantum dynamical systems Ф = （ L, s, Ф）, where s is a bayessian state on an orthomodular lattice L. Having introduced the notion of entropy hs（ Ф, A） of partition A of a Boolean algebra B with respect to a state s and a state preserving homomorphism Ф, we prove a few results on that, define the entropy of a dynamical system hs（Ф）, and show its invariance. The concept of sufficient families is also given and we establish that hs （Ф） comes out to be equal to the supremum of hs （Ф,A）, where A varies over any sufficient family. The present theory has then been extended to the quantum dynamical system （ L, s, Ф）, which as an effect of the theory of commutators and Bell inequalities can equivalently be replaced by the dynamical system （B, s0, Ф）, where B is a Boolean algebra and so is a state on B.     

Pattern recognition and data mining software based on artificial neural networks applied to proton transfer in aqueous environments

In computational physics proton transfer phenomena could be viewed as pattern classification problems based on a set of input features allowing classification of the proton motion into two categories： transfer ＇occurred＇ and transfer ＇not occurred＇. The goal of this paper is to evaluate the use of artificial neural networks in the classification of proton transfer events, based on the feed-forward back propagation neural network, used as a classifier to distinguish between the two transfer cases. In this paper, we use a new developed data mining and pattern recognition tool for automating, controlling, and drawing charts of the output data of an Empirical Valence Bond existing code. The study analyzes the need for pattern recognition in aqueous proton transfer processes and how the learning approach in error back propagation （multilayer perceptron algorithms） could be satisfactorily employed in the present case. We present a tool for pattern recognition and validate the code including a real physical case study. The results of applying the artificial neural networks methodology to crowd patterns based upon selected physical properties （e.g., temperature, density） show the abilities of the network to learn proton transfer patterns corresponding to properties of the aqueous environments, which is in turn proved to be fully compatible with previous proton transfer studies.     

Status and accuracy of the Monte Carlo generators for luminosity measurements

The status and accuracy of the precision Monte Carlo generators used for luminosity measurements at flavour factories is reviewed. It is shown that, thanks to a considerable, long-term effort in tuned comparisons between the predictions of independent programs, as well as in the validation of the generators against the presently available calculations of the next-to-next-to-leading order QED corrections to Bhabha scattering, the theoretical accuracy reached by the most precise tools is of about one per mille. This error estimate is valid for realistic experimental cuts, appears to be quite robust and is already sufficient for very accurate luminosity measurements. However, recent progress and possible advances to further improve it are also discussed.     

Beam tail effect of a performance-enhanced EC-ITC RF gun

The beam tail effect of multi-bunches will influence the electron beam performance in a high intensity thermionic RF gun. Beam dynamic calculations that illustrate the working states of single beam tail and multi-pulse feed-in of a performance-enhanced EC-ITC （external cathode independent tunable cavity） RF gun for an FEL （free electron laser） injector are performed to estimate the extracted bunch properties. By using both Parmela and homemade MATLAB codes, the effects of a single beam tail as well as interactions of multi-pulses are analyzed, where a ring-based electron algorithm is adopted to calculated RF fields and the space-charge field. Furthermore, the procedure of unexpected deviated-energy particles mixed with an effective bunch head is described by the MATLAB code as well. As a result, the performance-enhanced EC-ITC RF gun is proved to have the capability to extract continual stable bunches suitable for a high requirement THz-FEL.     

Effects of hydrogen bonds on solid state TATB,RDX,and DATB under high pressures

To probe the behavior of hydrogen bonds in solid energetic materials, we conduct ReaxFF and SCC-DFTB molecular dynamics simulations of crystalline TATB, RDX, and DATB. By comparing the intra- and inter-molecular hydrogen bond- ing rates, we find that the crystal structures are stabilized by inter-molecular hydrogen bond networks. Under high-pressure, the inter- and intra-molecular hydrogen bonds in solid TATB and DATB are nearly equivalent. The hydrogen bonds in solid TATB and DATB are much shorter than in solid RDX, which suggests strong hydrogen bond interactions existing in these energetic materials. Stretching of the C-H bond is observed in solid RDX, which may lead to further decomposition and even detonation.     

Calibration of RPC-based muon detector at BESⅢ

The calibration algorithm for RPC-based muon detector at BESIII has been developed. The calibration method, calibration error and algorithm performance are studied. The primary results of efficiency and noise at layer, module and strip levels have been calibrated with cosmic ray data. The calibration constants are available for simulation and reconstruction tuning. The results of Monte Carlo and data are also compared to check the validation and reliability of the algorithm.