单源前体合成水溶性的CdS和ZnS纳米晶

0引言量子点(QuantumDots)一般指半径小于或接近玻尔激子半径的半导体纳米晶颗粒。和有机染料分子相比,无机半导体纳米晶的带隙宽度可通过简单     

Colloidal CdSe nanocrystals synthesized in noncoordinating solvents with the addition of a secondary ligand: exceptional growth kinetics

The addition of a secondary ligand, trioctylphosphine oxide, in the synthesis of cadmium selenide nanocrystals performed in a system with oleic acid as the primary ligand and octadecene as the noncoordinating solvent gives rise to the improvement of nanocrystal size distribution. This phenomenon, which is more significant in the nucleation process than in the growth process, demonstrates that the existence of trioctylphosphine oxide allows for superior nucleation control and permits the facile and reproducible production of extremely small CdSe nanocrystals with narrow size distribution. A systematic study of the nanocrystal formation processes shows that the well-established colloidal nanocrystal growth mechanism, in which nucleation is followed by focusing of size distribution and ended with defocusing of size distribution, cannot be applied to our reactions. Instead, we observed an exceptional type of growth mechanism in which, after nucleation, clear defocusing instead of focusing follows; then slight focusing occurs.     

Synthesis of high-quality semiconductor nanoparticles in a composite hot-matrix

Semiconductor nanocrystals are of a great interest for many practical applications which motivates the search of low cost and environmental-friendly methods for their manufacturing. Here we report the synthesis of CdSe and CdS nanoparticles utilizing composite matrix of liquid paraffin as a non-coordinating solvent and stearic acid as a coordinating ligand. The nanoparticle growth kinetics is compared to that of the classical synthesis in trioctylphosphine oxide matrix. It is found that the nucleation and crystal growth are remarkably affected by the coordinating ligand. The CdSe and CdS nanocrystals can be isolated and purified from the matrix which makes it possible their large-scale synthesis for applications.     

Precursor conversion kinetics and the nucleation of cadmium selenide nanocrystals

The kinetics of cadmium selenide (CdSe) nanocrystal formation was studied using UV-visible absorption spectroscopy integrated with an automated, high-throughput synthesis platform. Reaction of anhydrous cadmium octadecylphosphonate (Cd-ODPA) with alkylphosphine selenides (1, tri-n-octylphosphine selenide; 2, di-n-butylphenylphosphine selenide; 3, n-butyldiphenylphosphine selenide) in recrystallized tri-n-octylphosphine oxide was monitored by following the absorbance of CdSe at λ = 350 nm, where the extinction coefficient is independent of size, and the disappearance of the selenium precursor using {(1)H}(31)P NMR spectroscopy. Our results indicate that precursor conversion limits the rate of nanocrystal nucleation and growth. The initial precursor conversion rate (Q(o)) depends linearly on [1] (Q(o)(1) = 3.0-36 μM/s) and decreases as the number of aryl groups bound to phosphorus increases (1 > 2 > 3). Changes to Q(o) influence the final number of nanocrystals and thus control particle size. Using similar methods, we show that changing [ODPA] has a negligible influence on precursor reactivity while increasing the growth rate of nuclei, thereby decreasing the final number of nanocrystals. These results are interpreted in light of a mechanism where the precursors react in an irreversible step that supplies the reaction medium with a solute form of the semiconductor.     

Separating Growth from Nucleation for Facile Control over the Size and Shape of Palladium Nanocrystals

In order to maximize the performance of nanocrystals in a specific application, it is necessary to control both their size and shape. Here we report a one-pot protocol that allows us to separate growth from nucleation for achieving better control over the size and shape of Pd nanocrystals. The two processes are temporally separated from each other, although the synthesis is carried out in the same reaction container. Size control is achieved by simply varying the ratio between the amounts of precursor allocated to the growth and nucleation processes. With the involvement of seeds at a fixed number, increasing the amount of precursor for growth leads to increasingly larger nanocrystals. Shape control is made possible by varying the capping agent, with bromide leading to a cubic shape and citrate inducing the formation of an octahedral shape. The synthesis can also be scaled up by at least tenfold without compromising the quality.     

Effect of digestion time and alkali addition rate on physical properties of magnetite nanoparticles

We investigate the effect of digestion time and alkali addition rate on the size and magnetic properties of precipitated magnetite nanoparticles. It is observed that the time required to complete the growth process for magnetite nanocrystals is very short (approximately 300 s), compared to long digestion times (20-190 min) required for MnO and CdSe nanocrystals. The rapid growth of magnetite nanoparticles suggests that Oswald ripening is insignificant during the precipitation stage, due to the low solubility of the oxides and the domination of a solid-state reaction where high electron mobility between Fe2+ and Fe3+ ions drives a local cubic close-packed ordering. During the growth stage (0-300 s), the increase in the particle size is nominal (6.7-8.2 nm). The effect of alkali addition rate on particle size reveals that the nanocrystal size decreases with increasing alkali addition rate. The particle size decreases from 11 to 6.8 nm as the alkali addition rate is increased from 1 to 80 mL/s. During the size decrease, the lattice parameter decreases from 0.838 to 0.835 nm, which is attributed to an increase in the amount of Fe3+ atoms at the surface due to oxidation. As the alkali addition rate increases, the solution reaches supersaturation state rapidly leading to the formation of large number of initial nuclei at the nucleation stage, resulting in large number of particles with smaller size. When alkali addition rate is increased from 1 to 80 mL/s, the saturation magnetization of the particles decreases from 60 to 46 emu/g due to the reduced particle size.     

Synthesis of Zinc Blende CdTe Nanocrystals and Facile Shape Conversion from Multipods to Dot-shaped Particles

Branched CdTe nanocrystals with zinc blende structure were directly synthesized in the early growth stage at a high initial concentration of cadmium precursor and a high molar ratio of Cd precursor to Te precuesor. Activation of the cadmium precursor by octadecylamine was found to be critical for the formation of branched CdTe nanocrystals. Furthermore, these as-prepared CdTe nanocrystals can evolve into nearly monodisperse dots through Ostwald ripening and still keep strong photoluminescence. These results manifest a new route to synthesize branch- and dot-shaped CdTe nanocrystals with zinc blende structure.     

Microwave synthesis of CdSe and CdTe nanocrystals in nonabsorbing alkanes

Controlling nanomaterial growth via the "specific microwave effect" can be achieved by selective heating of the chalcogenide precursor. The high polarizability of the precursor allows instantaneous activation and subsequent nucleation leading to the synthesis of CdSe and CdTe in nonmicrowave absorbing alkane solvents. Regardless of the desired size, narrow dispersity nanocrystals can be isolated in less than 3 min with high quantum efficiencies and elliptical morphologies. The reaction does not require a high temperature injection step, and the alkane solvent can be easily removed. In addition, batch-to-batch variance in size is 4.2 +/- 0.14 nm for 10 repeat experimental runs. The use of a stopped-flow reactor allows near continuous automation of the process leading to potential industrial benefits.     

无膦方法合成高质量CdSe纳米晶及其光学性质

以合成的十碳酸镉作为Cd前驱体, 十八烯作为单质硒溶剂, 并添加十八胺作为活性剂, 在无三丁基膦或三辛基膦参与的条件下, 以较低温度制备了具有闪锌矿结构的高质量的CdSe纳米晶. 利用吸收光谱、荧光光谱(PL)、X射线衍射(XRD)、透射电镜(TEM)对不同反应时间得到的CdSe纳米晶进行形貌和光谱性质表征. 实验结果表明, 采用该无膦法只需调控反应时间就可得到粒径均一、分散性好的CdSe纳米晶, 其荧光波长可覆盖470-630 nm的可见光区, 而荧光峰半高宽则始终保持在24-30 nm之间并具有较高的荧光量子产率(535 nm处大于60%). 最后, 对CdSe纳米晶量子产率随反应时间变化的原因进行了分析.     

Nucleation and growth of CdSe nanocrystals in a binary ligand system

The competing effects of two ligands, oleic acid (OA) and bis-(2,2,4-trimethylpentyl) phosphinic acid (TMPPA), on the nucleation rate and growth of CdSe nanocrystals in octadecene are reported. It is found that TMPPA acts as a high boiling point "nonsolvent" or "nucleating agent". Addition of TMPPA leads to higher initial particle yields and smaller particle diameters. Conversely, oleic acid inhibits nucleation and results in a drastic increase in "early time ripening" (ETR), a phenomenon that causes a rapid reduction in the number of particles within the first minutes of reaction. By controlling the number of nuclei formed with TMPPA and tuning the rate of ETR with oleic acid, high yields of particles can be obtained with sizes between 3 and 7 nm. Furthermore, in the absence of OA, the preparation of very small nanocrystals with diameters approximately 2 nm is facilitated.     

Single-source precursor route for overcoating CdS and ZnS shells around CdSe core nanocrystals

We reported a facile route for overcoating CdS and ZnS shells around colloidal CdSe core nanocrystals. To synthesize such double shelled core/shell nanocrystals, first, CdSe core nanocrystals were prepared in a much “greener” and cheap route, which did not involve the use of hazardous and expensive trioctylphosphine. Then, a low-cost and labor-saving route was adopted for the CdS and ZnS shell growth with the use of thermal decomposition of commercial available air stable single-source precursors cadmium diethyldithio-carbamate and zinc diethyldithiocarbamate in a non-coordinating solvent at intermediate temperatures. Powder X-ray diffraction patterns and transmission electron microscopy images confirm the epitaxial growth of the shell in the core/shell nanocrystals. The photoluminescence quantum yield of the resulting CdSe/CdS/ZnS core/shell nanocrystals can be as high as 90% in organic media and up to 60% after phase transfer into aqueous media. By varying the size of CdSe cores, the emission wavelength of the obtained core/shell nanostructures can span from 554 to 636 nm.     

Synthesis of nanocrystals via microreaction with temperature gradient: towards separation of nucleation and growth

By utilizing the symmetrical temperature distribution in a tube furnace chamber, a capillary microreactor was designed with the microchannel passing two well-controlled, stable temperatures in steep temperature gradients. The two-temperature microreator, first developed and implemented by this research team, provides an opportunity to separate the nucleation and growth of semiconductor nanocrystals, leading to better control of nucleation and growth kinetics. For the synthesis of CdSe nanocrystals as a model system, we demonstrated the improved size uniformity achieved by the two-temperature approach, confirming the success of the use of high temperature to burst nucleation and low temperature to promote growth.     

Highly luminescent CdTe/CdSe colloidal heteronanocrystals with temperature-dependent emission color

In this work we present the preparation of highly luminescent anisotropic CdTe/CdSe colloidal heteronanocrystals. The reaction conditions used (low temperature, slow precursor addition, and surfactant composition) resulted in a tunable shape from prolate to branched CdTe/CdSe nanocrystals. Upon CdSe shell growth the heteronanocrystals show a gradual evolution from type-I to type-II optical behavior. These heteronanocrystals show a remarkably high photoluminescence quantum yield (up to 82%) and negligible thermally induced quenching up to temperatures as high as 373 K.     

功能性CdSe纳米晶的合成及自组装膜光致发光

以巯基丙酸(RSH)为稳定剂,采用湿化学法合成了功能性CdSe纳米晶,用XRD、TEM表征其粒度和形貌,用UV-Vis监测成核及成膜过程。结果表明：制得的CdSe近似呈球形,平均粒径为48 nm。利用静电自组装法层层组装成CdSe-PDDA复合膜,荧光测试表明：所得CdSe纳米晶自组装复合膜(CdSe-PDDA)的荧光强度随着组装层数的增加而呈线性增强,该复合膜在582 nm附近有黄绿色荧光发射。     

Continuous‐Flow Synthesis of CdSe Quantum Dots: A Size‐Tunable and Scalable Approach

In recent years, continuous‐flow/microreactor processing for the preparation of colloidal nanocrystals has received considerable attention. The intrinsic advantages of microfluidic reactors have opened new opportunities for the size‐controlled synthesis of nanocrystals either in the laboratory or on a large scale. Herein, an experimentally simple protocol for the size‐tunable continuous‐flow synthesis of rather monodisperse CdSe quantum dots (QDs) is presented. CdSe QDs are manufactured by using cadmium oleate as cadmium source, selenium dioxide as selenium precursor, and 1‐octadecene as solvent. Exploiting selenium dioxide as selenium source and 1‐octadecene as solvent allows execution of the complete process in open air without any requirement for air‐free manipulations using a glove box or Schlenk line. Continuous‐flow processing is performed with a stainless steel coil of 1.0 mm inner diameter pumping the combined precursor solution through the reactor by applying a standard HPLC pump. The effect of different reaction parameters, such as temperature, residence time, and flow rate, on the properties of the resulting CdSe QDs was investigated. A temperature increase from 240 to 260 °C or an extension of the residence time from 2 to 20 min affords larger nanocrystals (range 3–6 nm) whereas the size distribution does not change significantly. Longer reaction times and higher temperatures result in QDs with lower quantum yields (range 11–28 %). The quality of the synthesized CdSe QDs was confirmed by UV/Vis and photoluminescence spectroscopy, small‐angle X‐ray scattering, and high‐resolution transmission electron microscopy. Finally, the potential of this protocol for large‐scale manufacturing was evaluated and by operating the continuous‐flow process for 87 min it was possible to produce 167 mg of CdSe QDs (with a mean diameter of 4 nm) with a quantum yield of 28 %.     

The kinetics of growth of semiconductor nanocrystals in a hot amphiphile matrix

The first comprehensive study on the kinetics of nanocrystal growth in a hot amphiphile medium is presented. An example is given with CdSe semiconductor nanocrystals grown after the injection of precursor (a mixture of Cd- and Se-reagents) in concentrated tri-octylphosphine oxide matrix (heated to more than 300 degrees C). The particle size distribution is reconstructed as a function of time from the absorption and photoluminescence spectra collected during the synthesis process. For this purpose a new expression is used relating the exciton energy due to quantum confinement with the nanocrystal radius. The growth kinetics is considered as a two-stage process in order to describe the time variation of nanoparticle size. During the first stage, called reaction-limited growth, the size of initial nucleus rapidly increases due to a sort of surface reaction exhausting the precursor in the nanoparticle vicinity. The growth in such conditions favors also a remarkable narrowing of the size distribution. The nanocrystal develops further on account of a slow precursor transfer from a distant space driven by the concentration gradient--classical diffusion-limited growth. The width of size distribution also increases proportional to the average particle size. Any growth will stop after the precursor concentration reaches a minimum value defining the limit for the final nanocrystal size in a batch. Solving the kinetic equations for the growth rate in each case of kinetics derives analytical expressions for the mean radius and variance of size distribution. Then the respective expressions are matched in a uniform solution valid during the entire synthesis. The theoretical model is in a good quantitative agreement with the experimental data for independent syntheses. Important characteristic scales of the processes (time-constant and length) and microscopic parameters of the reacting system (interfacial energy and reaction rate constant) are estimated from the data. It turns out that the fast reaction-limited growth is important to obtain well-defined nanocrystals of high optical quality by using less energy, time and consumable. However, to make them reproducibly uniform one should control also the ultra-fast nucleation process preceding the nanocrystal growth, which is still unknown. Nevertheless, our current findings allow the conceptual design of a new continuos-flow reactor for the manufacturing of a large amount of uniform nanocrystals.     

Synthesis of monodisperse spherical nanocrystals

Much progress has been made over the past ten years on the synthesis of monodisperse spherical nanocrystals. Mechanistic studies have shown that monodisperse nanocrystals are produced when the burst of nucleation that enables separation of the nucleation and growth processes is combined with the subsequent diffusion-controlled growth process through which the crystal size is determined. Several chemical methods have been used to synthesize uniform nanocrystals of metals, metal oxides, and metal chalcogenides. Monodisperse nanocrystals of CdSe, Co, and other materials have been generated in surfactant solution by nucleation induced at high temperature, and subsequent aging and size selection. Monodisperse nanocrystals of many metals and metal oxides, including magnetic ferrites, have been synthesized directly by thermal decomposition of metal-surfactant complexes prepared from the metal precursors and surfactants. Nonhydrolytic sol-gel reactions have been used to synthesize various transition-metal-oxide nanocrystals. Monodisperse gold nanocrystals have been obtained from polydisperse samples by digestive-ripening processes. Uniform-sized nanocrystals of gold, silver, platinum, and palladium have been synthesized by polyol processes in which metal salts are reduced by alcohols in the presence of appropriate surfactants.     

Influence of Cd Content and Se Doping on the Formation of CdSe Nanocrystals in Silica Xerogels: A SAXS Study

Small-angle X-ray scattering (SAXS) experiments were carried out to characterize the structure of the composite formed by CdSe nanocrystals embedded in a popous silica matrix (silica xerogels containing Cd with formamide addition and ultrasound treatment). SAXS results from samples before Se diffusion indicate the presence of heterogeneities with a bimodal size distribution which was associated to the existence of mesopores (pores of several hundred Å) immersed in a nanoporous matrix (characteristic pore radii of 20–30 Å). The diffusion of Se induces the nucleation and growth of CdSe nanocrystals. The average size of the nanocrystals increases with Cd content. Higher Se doses promote the formation of larger nanocrystals (radius of gyration of ∼30 to 50 Å). Anomalous scattering results confirm the existence of Se aggregation associated with CdSe nanocrystal formation and suggest that only partial segregation of Cd and Se occurs.     

Chemical and optical properties of CdSe and CdSe/ZnS nanocrystals investigated using high-performance liquid chromatography

We apply a variety of characterization tools, including dynamic light scattering (DLS), transmission electron microscopy (TEM), high-resolution size-exclusion chromatography (HRSEC), and X-ray fluorescence (XRF), to study CdSe and CdSe/ZnS semiconductor nanocrystals of various sizes. We compare the size monodispersity, composition, and optical properties such as absorbance, photoluminescence (PL), and photoluminescence excitation of samples synthesized by high-temperature organometallic decomposition methods to CdSe clusters synthesized in our laboratory using a room-temperature metathesis from ionic precursors in coordinating solvents. DLS revealed considerable aggregation in all the conventionally synthesized samples, while TEM showed significant size and shape polydispersity in the core/shell CdSe/ZnS nanoparticles. We demonstrate how HRSEC can be used to explore size and shape polydispersity in semiconductor nanocrystals by measurement of the spectral homogeneity of the PL and PLE of spectra obtained within cluster elution peaks observed by HRSEC. Using HRSEC, we show that size fractionation by solvent/nonsolvent precipitation is only partially effective in size selection and that discrete size populations are present in each fraction. HRSEC shows that our synthesis yields a single-size, blue-emitting, homogeneous population whose absorbance and PL correspond to those of the smallest-size fraction made by conventional synthesis. This suggests that especially stable discrete sizes are favored in both synthetic methods.     

Growth dynamics of CdTe nanoparticles in liquid and crystalline phases

Normally the size dependence of the chemical potential is used to explain the growth dynamics of semiconductor nanoparticles. Instead we show that very small CdTe nanoparticles continue to grow at high dilution, the growth rate is virtually independent of monomer concentration, nucleation continues after the growth of larger particles has saturated, and the growth rate has a much greater nonlinear dependence on particle size than predicted by theory. We suggest that nanoparticle growth is fast in the liquid phase and then saturates as the particles change phase from liquid to crystal at a threshold size which depends on the growth temperature and not the monomer concentration. The photoluminescence quantum efficiency becomes high when tellurium is depleted in the reaction solution giving a cadmium enriched surface.