The influence of molecular interactions on polymerization—IV: Copolymerization of 2-naphthyl methacrylate and methyl methacrylate in solvents with different dielectric constants

The copolymerization of 2-naphthyl methacrylate (2-NM) with methyl methacrylate (MMA) initiated by 2,2′-azoisobutyronitrile in carbon tetrachloride, chloroform, benzene, acetone and acetonitrile was investigated. The reactivity ratios determined by the methods of Fineman-Ross and Kelen-Tüdős are: in carbon tetrachloride—r_2-NM = 2.46 ± 0.25, r_MMA = 0.61 ± 0.06; chloroform—r_2-NM = 2.71 ± 0.30, r_MMA = 0.60 ± 0.06; benzene—r_2-NM = 2.62 ± 0.44, r_MMA = 0.63 ± 0.11; acetone—r_2-NM = 4.13 ± 0.45, r_MMA = 0.60 ± 0.06 and acetonitrile—r_2-NM = 3.70 ± 0.30, r_MMA = 0.62 ± 0.05.The dependence of the reactivity ratios on the solvent is explained on the basis of formation of complexes between the electron-donating naphthalene rings and the electron-accepting methacrylic double bonds, as indicated by NMR studies.     

Synthesis, spectral and thermal properties of homo- and copolymers of 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate with styrene and methyl methacrylate and determination of monomer reactivity ratios

The methacrylate monomer, 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate (IAOEMA), was synthesized by reacting 2-chloro-N-(5-methylisoxazol)acetamide dissolved in acetonitrile with sodium methacrylate in the presence of triethylbenzylammoniumchloride (TEBAC). The free-radical-initiated copolymerization of IAOEMA, with styrene (ST) and methyl methacrylate (MMA) was carried out in dimethylsulphoxide (DMSO) solution at 65 °C using 2,2^′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios in the feed. The monomer (IAOEMA) and copolymers were characterized by FTIR, ¹H- and ¹³C-NMR spectral studies. The copolymer composition was evaluated by nitrogen content in polymers led to the determination of reactivity ratios. The reactivity ratios of the monomers were determined by the application of Fineman-Ross and Kelen-Tüdös methods. The analysis of reactivity ratios revealed that ST and MMA are more reactive than IAOEMA, and copolymers formed are statisticalle in nature. The molecular weights (M_w and M_n) and polydispersity index of the polymers were determined using gel permeation chromagtography. Glass transition temperatures of the copolymers were found to increase with an increase in the mole fraction of IAOEMA in the copolymers. The apparent thermal decomposition activation energies (E_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance.     

Molecular dynamics of polystyrene model molecules: Solvent effects on intramolecular excimer formation in 2,4-diphenylpentanes

Intramolecular excimer formation in 2,4-diphenylpentanes has been examined in a homologous series of alkanes, in ethanol and in mixtures of ethanol, ethylene glycol and glycerol. The ratio of the emission intensities of dimer and monomer (I_D/I_M) is not affected in low viscosity solvents but, above 4 cP, viscosity effects are discernible and a relationship of the form I_D/I_M = Aη^?2 is obeyed. In methylene chloride, only the dl molecule exhibits a decrease of the efficiency of excimer sampling. The temperature dependence of I_D/I_M in isooctane and methylene chloride has been interpreted in terms of the activation energy of the excimer sampling.     

Reactivity ratios and sequence structures of the copolymers prepared using photo‐induced copolymerization of MMA with MTMP

4‐Methacryloyl‐2,2,6,6‐tetramethyl‐piperidine (MTMP) was applied as reactive hindered amine piperidine. Photo‐induced copolymerization of methyl methacrylate (MMA, M₁) with MTMP (M₂) was carried out in benzene solution at ambient temperature. The reactivity ratios for these monomers were measured by running a series of reactions at various feed ratios of initial monomers, and the monomer incorporation into copolymer was determined using ¹H NMR. Reactivity ratios of the MMA/MTMP system were measured to be r₁ = 0.37 and r₂ = 1.14 from extended Kelen‐Tüdos method. The results show that monomer MTMP prefers homopolymerization to copolymerization in the system, whereas monomer MMA prefers copolymerization to homopolymerization. Sequence structures of the MMA/MTMP copolymers were characterized using ¹H NMR. The results show that the sequence structure for the main chain of the MMA/MTMP copolymers is mainly composed of a syndiotactic configuration, only with a little heterotactic configuration. Three kinds of the sequences of rr, rr′, and lr′ in the syndiotactic configuration are found. The sequence‐length distribution in the MMA/MTMP copolymers is also obtained. For f₁ = 0.2, the monomer unit of MMA is mostly separated by MTMP units, and for f₁ = 0.6, the alternating tendency prevails and a large number of mono‐sequences are formed; further up to f₁ = 0.8, the monomer unit of MTMP with the sequence of one unit is interspersed among the chain of MMA. Copyright © 2012 John Wiley & Sons, Ltd.     

Copolymers of methyl methacrylate and fluoroalkyl methacrylates: Effects of fluoroalkyl groups on the thermal and optical properties of the copolymers

Fluoroalkyl methacrylates, 2,2,2‐trifluoroethyl methacrylate ( 1 ), hexafluoroisopropyl methacrylate ( 2 ), 1,1,1,3,3,3‐hexafluoro‐2‐methyl‐2‐propyl methacrylate ( 3 ), and perfluoro t‐butyl methacrylate ( 4 ) were synthesized. Homopolymers and copolymers of these fluoroalkyl methacrylates with methyl methacrylate (MMA) were prepared and characterized. With the exception of the copolymers of MMA and 2,2,2‐trifluoroethyl methacrylate ( 1 ), the glass transition temperatures (T_gs) of the copolymers were found to deviate positively from the Gordon‐Taylor equation. The positive deviation from the Gordon‐Taylor equation could be accounted for by the dipole–dipole intrachain interaction between the methyl ester group and the fluoroalkyl ester group of the monomer units. These T_g values of the copolymers were found to fit with the Schneider equation. The fitting parameters in the Schneider equation were calculated, and R² values, the coefficients of determination, were almost 1.0. The refractive indices of the copolymers, measured at 532, 633, and 839 nm wavelengths, were lower than that of PMMA and showed a linear relationship with monomer composition in the copolymers. 2 and MMA have a tendency to polymerize in an alternating uniform monomer composition, resulting in less light scattering. This result suggests that the copolymer prepared with an equal molar ratio of 2 and MMA may have useful properties with applications in optical devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4748–4755, 2008     

Properties of vinylpyrrolidone-tert-butylphenyl methacrylate copolymers in solution

Copolymers of vinylpyrrolidone-p-tert-butylphenyl methacrylate (VP-MBPh) of several compositions were prepared by polymerization in benzene at 50°C using α′α′-azobisisobutyronitrile as initiator. Three of the copolymers were fractionated. Number-average molecular weights of fractionated samples were determined by osmotic pressure in benzene or 2-propanol. Kuhn–Mark–Houwink relations were established in benzene, chloroform, and 2-propanol. From the relation between M _n and the intrinsic viscosity (η), it appears that these random copolymers behave as predicted by the theory for flexible polymers. Abnormal viscometric behavior shown by one of the copolymers in nitromethane at 29°C (the theta temperature) is discussed. The Stockmayer–Fixman semiempirical method was used for estimating unperturbed dimensions from viscosity data obtained in chloroform, a good common solvent. Values of the viscosity parameter K_θ increase with the content of p-tert-butylphenyl methacrylate. In general, experimental K_θ values are higher than those calculated for the homopolymers. Excluded-volume parameters are estimated and discussed in relation to repulsive interactions between unlike monomer units.     

Magnetic field dependence of monomer and excimer delayed fluorescence of aromatics in fluid solution

We have extended our study of the magnetic field dependence of monomer (M_M) and excimer (I_D) delayed fluorescence of aromatics in fluid solution. I_M and I_D show a monotonic decrease with increasing field strength at room temperature in agreement with theoretical predictions. At lower temperatures both I_M and I_D show an initial increase followed by a monotonic decrease. This marked temperature dependence can be attributed to a “freezing-out” of the effect of molecular motion on the field effect. At even lower temperatures the field effect curves of I_M and I_D start to diverge. Two models have been proposed to explain the mechanism of excimer formation in triplet—triplet annihilation. Qualitatively at least the divergence can be rationalized in terms of both models.     

Property modification of poly(methyl methacrylate) through copolymerization with fluorinated aryl methacrylate monomers

Copolymers of methyl methacrylate (MMA) with 2,3,5,6‐tetrafluorophenyl methacrylate (TFPMA), pentafluorophenyl methacrylate (PFPMA), and 4‐trifluoromethyl‐2,3,5,6‐tetrafluorophenyl methacrylate (TFMPMA) were investigated. All the three systems showed a random copolymerization character. The composition, glass transition temperature (T_g), and refractive index of the copolymers obtained were studied. T_gs of TFPMA/MMA and PFPMA/MMA copolymers were found to deviate positively from the Gordon–Taylor equation. However, T_gs of TFMPMA/MMA copolymers were well fit with the Gordon–Taylor equation. These results indicated the existence of interaction between MMA and either TFPMA or PFPMA units in copolymers. This interaction resulted in the enhancement of the T_g of MMA polymers through the copolymerization with TFPMA and PFPMA. The refractive index and the light transmittance of copolymers were close to those of PMMA. Copyright © 2007 John Wiley & Sons, Ltd.     

Configurations conducive to the formation of intramolecular excimers in poly(N‐vinyl carbazole) and its copolymers

The ratios of the intensity of excimer and monomer emissions, denoted I_E/I_M, in poly(N‐vinyl carbazole) and copolymers of N‐vinyl carbazole and methyl methacrylate were measured with steady‐state fluorescence. Measurements were performed in dilute solutions of several fluid solvents at 25 °C and in a solid matrix of poly(methyl methacrylate) at room temperature. The values of I_E/I_M depended on the nature of the solvent, the emission wavelength, and the copolymer composition. Molecular dynamics simulations were performed for diastereoisomers of 2,4‐di(N‐carbazolyl)pentane and for isotactic and syndiotactic trichromophoric copolymer fragments to assist in the identification of the thermally accessible conformations capable of forming intramolecular excimers and the configurational relationship of the carbazole units in these complexes. Nearest neighbor carbazole groups made the dominant contribution to the excimers. Excimers were more likely in isotactic sequences than in syndiotactic sequences, as was also the case for the low‐energy excimer arising from the complete overlap of two carbazole units. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1272–1281, 2001     

Organotin polymers—III: Copolymerization and terpolymerization of tributyltin acrylate with methyl methacrylate,propyl methacrylate,butyl methacrylate and acrylonitrile

Copolymerizations of tri-n-butyltin acrylate (M₁) with (a) methyl methacrylate (M₂), (b) propyl methacrylate (M₃), (c) butyl methacrylate (M₄) and (d) acrylonitrile (M₅) in solution at 70 using AIBN as initiator led to monomer reactivity ratios as follows: (a) r₁ = 0.401 and r₂ = 2.199, (b) 0.323 and 1.713, (c) 0.196 and 1.65, and (d) 0.243 and 1.008. The variation of the average copolymer composition with conversion for two copolymers from M₁ with M₂ and M₄ were calculated and verified experimentally. Four terpolymer compositions involving M₁ and M₅ with M₂ or M₄ were prepared and the terpolymer compositions were calculated on the basis of tin and nitrogen analyses. The variations of instantaneous and average terpolymer composition with conversion fit satisfactorily the experimental results over a wide range of conversion.     

Orientation and relaxation in uniaxially stretched styrene-co-methyl methacrylate random copolymers

Orientation and relaxation behavior in uniaxially stretched styrene-co-methyl methacrylate random copolymers was investigated. When compared at a reference temperature T = T_g + constant, orientation of methyl methacrylate units (MMA) decreases while styrene units orientation increases with a decrease in the styrene percentage. This behavior can be related to intermolecular interactions between MMA units and to the stiffness of styrene-MMA units, which do not undergo conformational changes upon stretching. Both monomer units relax the same in a given copolymer and chain relaxation increases when the styrene percentage increases. Orientation relaxation of styrene and MMA units can be reduced to two general relaxation master curves whatever the blend composition, when the results are compared at same monomeric friction coefficient. © 1994 John Wiley & Sons, Inc.     

Magnetic field dependence of delayed fluorescence of pyrene in solution

The magnetic field effect on the intensities of monomer (I_M) and excimer (I_D) delayed fluorescence of pyrene has been found to be identical. This result suggests a common spin-selective step in the processes giving rise to I_M and I_D, and is discussed in the light of previously proposed mechanisms. An unusual solvent effect is found on the I_M (I_D) versus field strength curves. This is attributed to photochemical doublet-radical formation. Doublet-radical formation affects the field dependence of I_M and I_D through spin selectivity in the triplet quenching reaction.     

Graft copolymerization of 2-hydroxyethyl methacrylate and methyl methacrylate onto hide powder

Graft copolymerization of 2-hydroxyethyl methacrylate(HEMA) and mixtures of HEMA with methyl methacrylate (MMA) onto hide powder was attempted using ceric ammonium nitrate as initiator, with a view to optimize the conditions for graft copolymerization. Percent grafting and grafting efficiency were calculated for various variables such as monomer concentration, initator concentration and mole ratio of HEMA to MMA. R_p, R_g and R_h (rates of polymerization, grafting and homopolymerization respectively) were also evaluated. It was observed that R_p increased linearly with increasing concentration of MMA except at very low concentrations of the monomer. An explanation is given for the effect of variables on extent of grafting and grafting efficiency.     

Anionic alternating copolymerization of α‐arylacrylates with methyl methacrylate: Effect of monomer sequence on fluorescence

Anionic polymerizations of acrylates possessing 1‐pyrenyl (Py1), 1‐naphthyl (Np1), 2‐naphthyl (Np2), and 2‐fluorenyl (Fl2) groups as α‐substituents were investigated as well as the properties of the obtained polymers. Py1 and Np1 did not undergo polymerization, whereas Np2 and Fl2, annulated α‐phenylacrylates at 3,4‐position of the phenyl group, afforded homo‐oligomers and alternating copolymers with methyl methacrylate (MMA). The oligomer of Fl2 [oligo(Fl2)] exhibited strong excimer emission in diluted solution. In contrast, dominant monomer emission was observed for the alternating copolymer with MMA [poly(Fl2‐co‐MMA)]. In the alternating copolymer, MMA units could function as spacers preventing the association of pendant fluorene moieties to suppress the excimer formation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2806–2814     

Synthesis of poly[1,1,1,3,3,3-hexafluoro-2-(pentafluorophenyl)propan-2-yl methacrylate]: Thermal and optical properties of the copolymers with methyl methacrylate

Poly[1,1,1,3,3,3-hexafluoro-2-(pentafluorophenyl)propan-2-yl methacrylate (I)] was synthesized, and the copolymers of the monomer I with various compositions of methyl methacrylate (MMA) were prepared and characterized. The glass transition temperature values obtained for the copolymers were between 120 and 150 °C. The refractive indices of the copolymers were in the range of 1.4350-1.4872 at 532 nm. They were thermally stable (up to 297-323 °C), and their water absorptive properties were greatly decreased, compared with pure PMMA.     

Polymerization behavior of 2,2,6,6-tetramethylpiperidinyl methacrylate: A monomer carrying a hindered amine group

Copolymers of 2,2,6,6-tetramethylpiperidinyl methacrylate (TPMA) with styrene (S) and with methyl methacrylate (MMA) were synthesized using AIBN as initiator. S–TPMA copolymers from feed ranging from 0.10–0.80 mole fractions TPMA and MMA-TPMA copolymers from feed of 0.04–0.85 mole fractions TPMA were used in the determination of monomer reactivity ratios r₁, r₂. Four different methods were employed in the calculations of r₁ and r₂ and all calculated results were in good agreement with each other. The structure of S–TPMA copolymers was inferred to be of an alternating nature while that of MMA–TPMA copolymers was random. Both copolymers are potential hindered amine light stabilizers (HALS) and are expected to be less extractable from, and more compatible with, polystyrene and poly(methyl methacrylate) base polymers.     

Photosensitized copolymerization of optically active N-l-menthylmaleimide with styrene and methyl methacrylate

Photosensitized copolymerization of optically active N-l-menthylmaleimide (NMMI) with styrene (Sty) and methyl methacrylate (MMA) was carried out in tetrahydrofuran (THF) at 30°C with benzoyl peroxide (BPO). The monomer reactivity ratios for the copolymerization of NMMI (M₂) with Sty (M₁) and MMA (M₁) were r₁ = 0.08 ± 0.10, r₂ = 0.20 ± 0.05 and r₁ = 2.85 ± 0.06, r₂ = 0.07 ± 0.06, respectively. Copoly-MMA–NMMI and poly-NMMI showed positive circular dichroism(CD) curves of equal intensity and shape over the wavelength region from 230 to 270 nm; copoly-Sty–NMMI also showed a positive CD curve which was similar in shape but was different in intensity from that of poly-NMMI. The correlation between monomer unit ellipticity of the copolymers and their composition would suggest the alternating and stereoregular copolymerization of NMMI with Sty.     

Homopolymerization and copolymerization of isocyanatoethyl methacrylate

This article describes the homopolymerization of isocyanatoethyl methacrylate (IEM) and its copolymerization with methyl methacrylate (MMA) in acetonitrile in the presence of 2,2′‐azobisisobutyronitrile. The constant characteristic of IEM polymerizability (k_p²/k_te = 128 × 10^?3 L mol^?1 s^?1, where k_p is the propagation constant and k_te is the termination constant) was determined. The study of IEM reactivity toward MMA gave ratios of 0.88 and 1.20 for IEM and MMA, respectively. The physicochemical properties of the IEM homopolymer and IEM/MMA copolymers were also studied. The glass‐transition temperature of poly(isocyanatoethyl methacrylate) was found to be 47 °C. From the thermogravimetric analysis of the weight‐loss percentage corresponding to the first wave of the thermogram, it was shown that the degradation mechanism of the IEM/MMA copolymers started from the isocyanate group. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4762–4768, 2006     

The flame-retardant material - 1. Studies on thermal characteristics and flame retardance behavior of phosphorus-containing copolymer of methyl methacrylate with 2-methacryloxyethyl phenyl phosphate

2-Methacryloxyethyl phenyl phosphate/methyl methacrylate (MEPP/MMA) copolymers were synthesized by the bulk polymerization of MMA in the presence of various amounts of MEPP. MEPP was prepared by the esterification of phenyl dichlorophosphate with 2-hydroxyethyl methacrylate, followed by hydrolysis. Structural and compositional details of MEPP were obtained by Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance, ¹³C nuclear magnetic resonance, ³¹P nuclear magnetic resonance, and mass spectrometer, as well as by elemental analysis. The monomer reactivity ratios of MEPP/MMA system were calculated by the methods of Fineman-Ross, Kelen-Tüdös, and Joshi-Joshi. The thermal degradation temperature of the MEPP/MMA copolymers was considerably enhanced by only a slight decrease in T_g, as determined by differential scanning calorimetry and thermogravimetric analysis experiments. The fire-retardant properties of MEPP/MMA copolymers were also studied by LOI and UL-94 tests, indicating that an MEPP/MMA copolymer with only 2.17 wt% phosphorus can effectively inhibit burning.