Iridium and rhodium complexes with the planar chiral thioether ligands in asymmetric hydrogenation of ketones and imines

Rhodium complexes with the planar chiral phosphinoferrocenyl thioether ligands [Rh(P,SR)(diene)X] (R = Me, Bu^t, Ph, Bn, diene is cyclooctadiene (COD) or norbornadiene (NBD), X = Cl, BF₄) catalyze hydrogenation of ketones, imines, and heteroaromatic compounds; in the case of acetophenone, the enantioselectivity reached 60% ee. Similar iridium complexes demonstrate a good activity in the hydrogenation of imines, the maximal enantioselectivity in the case of N-phenyl-N-(1-phenylethylidene)amine was about 40% ee.     

Nickel complexes of bidentate [S2] and [SN] borato ligands

Nickel(II) complexes of the monoanionic borato ligands [Ph2B(CH2SCH3)2] (abbreviated Ph2Bt), [Ph2B(CH2S(t)Bu)2] (Ph2Bt(tBu)), [Ph2B(1-pyrazolyl)(CH2SCH3)], and [Ph2B(1-pyrazolyl)(CH2S(t)Bu)] have been prepared and characterized. While [Ph2Bt] formed the square planar homoleptic complex, [Ph2Bt]2Ni, the larger [S2] ligand with tert-butyl substituents, [Ph2BttBu], yielded an unexpected organometallic derivative, [Ph2Bt(tBu)]Ni(eta2-CH2SBut), resulting from B-C bond rupture. The analogous thiametallacycle derived from the [S3] ligand, [PhB(CH2S(t)Bu)3] (PhTt(tBu)), has been structurally authenticated (Schebler, P. J.; Mandimutsira, B. S.; Riordan, C. G.; Liable-Sands, L.; Incarvito, C. D.; Rheingold, A. L. J. Am. Chem. Soc. 2001, 123, 331). The [SN] borato ligands formed exclusively the cis stereoisomers upon reaction with Ni(II) sources, [Ph2B(1-pyrazolyl)(CH2SR)]2Ni. Analysis of the Ni(II/I) reduction potentials by cyclic voltammetry revealed a approximately 600 mV anodic shift upon replacement of two thioether donors ([Ph2Bt]2Ni) with two pyrazolyl donors ([Ph2B(1-pyrazolyl)(CH2SCH3)]2Ni) consistent with the all thioether environment stabilizing the lower oxidation state of nickel.     

Rhodium complexes with the chelating and binucleating ligands P(CH2CH2Py)nPh3-n (Py = 2-pyridyl; n = 1,2): structures and fluxional behavior

Several rhodium(I) complexes of the type [RhX(CO)(PePy2)], [Rh(diene)(PePy)]+, and [Rh(diene)(PePy2)]+ (PePyn = P(CH2CH2Py)nPh3-n; Py = 2-pyridyl; n = 1, 2) have been prepared. The two former are square planar; the latter are pentacoordinated for diene = tetrafluorobenzobarrelene or norbornadiene (confirmed by X-ray diffraction), but an equilibrium of 4- and 5-coordinate isomers exists in solution for diene = 1,5-cyclooctadiene. The fluxional behavior of all these complexes is studied by NMR spectroscopy. The complex [Rh(NBD)(PePy2)]PF6.Cl2CH2 crystallizes in the monoclinic space group P21/n with a = 8.455(1) A, b = 18.068(3) A, c = 19.729(3) A, beta = 99.658(3)degrees, and Z = 4. The complexes [Rh(diene)(PePy2)]+ react with CO to give the dimeric complex [Rh2(CO)2[P(CH2CH2Py)2Ph]2](BF4)2 with the pyridylphosphine acting as P,N-chelating and P,N-bridging.     

Rh(I) coordination chemistry of chiral alpha-aminophosphine(eta6-arene)chromium tricarbonyl ligands

The diastereoselective addition of Ph(2)PH to the chiral ortho-substituted eta(6)-benzaldimine complexes (eta(6)-o-X-C(6)H(4)CH=NAr)Cr(CO)(3) (1, X = MeO, Ar = p-C(6)H(4)OMe; 2, X = Cl, Ar = Ph) leads to the formation of the corresponding chiral aminophosphines (alpha-P,N) Ph(2)P-CH(Ar(1))-NHAr(2) (3, Ar(1) = o-C(6)H(4)(OCH(3))[Cr(CO)(3)], Ar(2) = p-C(6)H(4)OCH(3); 4, Ar(1) = o-C(6)H(4)Cl[Cr(CO)(3)], Ar(2) = Ph) in equilibrium with the starting materials. The uncomplexed benzaldimine (o-ClC(6)H(4)CH=NPh), 2', analogously produces an equilibrium amount of the corresponding aminophosphine Ph(2)P-CH(Ar(1))-NHAr(2) (4', Ar(1) = o-C(6)H(4)Cl, Ar(2) = Ph). Depending on the equilibrium constant, the subsequent addition of (1)/(2) equiv of [RhCl(COD)](2) (COD = 1,5-cyclooctadiene) leads to either Ph(2)PH oxidative addition in the case of 3 or to the corresponding [RhCl(COD)(alpha-P,N)] complexes [RhCl(COD)(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)] (5) and [RhCl(COD)(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)] (5') in the cases of the aminophosphines 4 and 4'. The addition of the latter ligands, as racemic mixtures, to (1)/(4) equiv of [Rh(CO)(2)Cl](2) leads to the [RhCl(CO)(alpha-P,N)(2)] complexes [RhCO(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)(2)Cl] (7) or [RhCO(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)(2)Cl] (7') as mixtures of (R(C),S(C))/(S(C),R(C)) and (R(C),R(C))/(S(C),S(C)) diastereomers. The rhodium complexes 5 and 7' have been fully characterized by IR and (31)P NMR spectroscopies and X-ray crystallography. These compounds exhibit intramolecular Rh-Cl.H-N interactions in the solid state and in solution. The stability of the new rhodium complexes has been studied under different CO pressures. Under 1 atm of CO, 5 is converted to an unstable complex [RhCl(CO)(2)(alpha-P,N)], 6, which undergoes ligand redistribution leading to 7 plus an unidentified complex. This reaction is inhibited under higher CO or syngas pressure, as confirmed by the observation of the same catalytic activity in hydroformylation when styrene was added to a catalytic mixture that was either freshly prepared or left standing for 20 h under high CO pressure.     

A study of M-X-BR3 (M = Pt, Pd or Rh; X = Cl or I) interactions in square planar ambiphilic ligand complexes: structural, spectroscopic, electrochemical and computational comparisons with borane-free analogues

Reaction of [PtCl(2)(COD)] and [PtI(2)(COD)] with 2,7-di-tert-butyl-5-diphenylboryl-4-diphenylphosphino-9,9-dimethylthioxanthene (TXPB) afforded square planar [PtCl(2)(TXPB)] (1B) and [PtI(2)(TXPB)] (4B), both of which were crystallographically characterized. Single-crystal X-ray quality crystals were also obtained for [PdCl(2)(TXPB)] (2B; Emslie et al., Organometallics, 2008, 27, 5317) as 2B·2CH(2)Cl(2) and solvent-free 2B. Both the chloro and iodo TXPB complexes exhibit metal-halide-borane bridging interactions similar to those in previously reported [RhCl(CO)(TXPB)] (3B) and [RhI(CO)(TXPB)] (5B) (Emslie et al., Organometallics, 2006, 25, 583 and Inorg. Chem., 2010, 49, 4060). To facilitate a more detailed analysis of M-X-BR(3) (X = Cl and I) interactions, a borane-free analogue of the TXPB ligand, 2,7-di-tert-butyl-4-diphenylphosphino-9,9-dimethylthioxanthene (TXPH), was prepared. Reaction with [PtX(2)(COD)] (X = Cl or I), [PdCl(2)(COD)] and 0.5 [{RhCl(CO)(2)}(2)] provided square planar [PtCl(2)(TXPH)] (1H), [PdCl(2)(TXPH)] (2H), [RhCl(CO)(TXPH)] (3H) and [PtI(2)(TXPH)] (4H). M-Cl-BR(3) and M-I-BR(3) bonding in 1B-5B was then probed through the use of structural comparisons, IR and NMR spectroscopy, cyclic voltammetry, and DFT calculations (Slater-type orbitals, Mayer bond orders, Hirshfeld charges, fragment analysis, SCF deformation density isosurfaces, and energy decomposition analysis).     

Synthesis and reactivity of fluoro complexes: Part 2. Rhodium(I) fluoro complexes with alkene and phosphine ligands. Synthesis of the first isolated rhodium(I) bifluoride complexes. Structure of [Rh3(mu3-OH)2(COD)(3)](HF2) by X-ray powder diffraction

The reaction between [Rh(mu-OH)(COD)](2) (COD = 1,5-cyclooctadiene) and 73% HF in THF gives [Rh(3)(mu(3)-OH)(2)(COD)(3)](HF(2)) (1). Its crystal structure, determined by ab initio X-ray powder diffraction methods (from conventional laboratory data), contains complex trimetallic cations linked together in 1D chains by a mu(3)-OH...F-H-F...HO-mu(3) sequence of strong hydrogen bonds. The complex [Rh(mu-F)(COE)(2)](2) (COE = cyclooctene; 2), prepared by reacting [Rh(mu-OH)(COE)(2)](2) with NEt(3).3HF (3:2), has been characterized. Complex 1 reacts with PR(3) (1:3) to give [RhF(COD)(PR(3))] [R = Ph (3), C(6)H(4)OMe-4 (4), (i)Pr (5), Cy (6)] that can be prepared directly by reacting [Rh(mu-OH)(COD)](2) with 73% HF and PR(3) (1:2:2). The reactions of 1 with PPh(3) or Et(3)P have been studied by NMR spectroscopy at different molar ratios. Complexes [RhF(PEt(3))(3)] (7), [RhF(COD)(PEt(3))] (8), and [RhF(PPh(3))(3)] (9) have been detected. The complex [Rh(F)(NBD)(iPr(3)P)] (NBD = norbornadiene; 10) was prepared by the sequential treatment of [Rh(mu-OMe)(NBD)](2) with 1 equiv of NEt(3).3HF and (i)Pr(3)P. The first isolated bifluoride rhodium(I) complexes [Rh(FHF)(COD)(PR(3))] [R = Ph (11), (i)Pr (12), Cy (13)], obtained by reacting fluoro complexes 3, 5, and 6 with NEt(3).3HF (3:1), have been characterized. The crystal structures of 3 and 11 have been determined.     

Insertion reactions of [M(SR)3(PMe2Ph)2] with CS2 (M = Ru, Os; R = C6F4H-4, C6F5). X-ray structures of [Ru(S2CSC6F4H-4)2(PMe2Ph)2], trans-thiolates [M(SR)2(S2CSR)(PMe2Ph)2] (M = Ru; R = C6F5 and M = Os; R = C6F4H-4), and trans-thiolate-phosphine [Os(SC6F5)2(S2CSC6F5)(PMe2Ph)2

Reactions of [M(SR)(3)(PMe(2)Ph)(2)] (M = Ru, Os; R = C(6)F(4)H-4, C(6)F(5)) with CS(2) in acetone afford [Ru(S(2)CSR)(2)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 1; C(6)F(5), 3) and trans-thiolates [Ru(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 2; C(6)F(5), 4) or the isomers trans-thiolates [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 5; C(6)F(5), 7) and trans-thiolate-phosphine [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 6; C(6)F(5), 8) through processes involving CS(2) insertion into M-SR bonds. The ruthenium(III) complexes [Ru(SR)(3)(PMe(2)Ph)(2)] react with CS(2) to give the diamagnetic thiolate-thioxanthato ruthenium(II) and the paramagnetic ruthenium(III) complexes while osmium(III) complexes [Os(SR)(3)(PMe(2)Ph)(2)] react to give the paramagnetic thiolate-thioxanthato osmium(III) isomers. The single-crystal X-ray diffraction studies of 1, 4, 5, and 8 show distorted octahedral structures. (31)P [(1)H] and (19)F NMR studies show that the solution structures of 1 and 3 are consistent with the solid-state structure of 1.     

Base induced P-C bond cleavage in a coordinated bis(dimethylphosphino)methane ligand

Treatment of fac-[Mn(CNR)(CO)3{(PMe2)2CH2}]ClO4 (1a R = Ph, R = tBu) with KOH produced the cleavage of one of the P-C bonds of the coordinated dmpm ligand, resulting in the formation of phosphine-phosphinite complexes fac-[Mn(PMe2O)(CNR)(CO)3(PMe3)] (2a,b). Alkoxides such as NaOMe and NaOEt promoted similar processes in 1a,b, yielding fac-[Mn(CNR)(CO)3(PMe3)(PMe2OR')]ClO4 (3a R = tBu, R' = Me; 3b R = Ph, R' = Me; 4a R = tBu, R' = Et; 4b R = Ph, R' = Et) derivatives. The phosphinite ligand in 2a, b can be sequentially protonated by addition of 0.5 and 1 equivalent of HBF4 leading to fac-[{Mn(CNR)(CO)3(PMe3)(PMe2O)}2H]BF4 (6a,b) and fac-[Mn(CNR)(CO)3(PMe3)(PMe2OH)]BF4 (5a,b), respectively.     

Synthesis and coordination properties of new bis(phosphinomethyl)pyridine N,P,P'-trioxides

In a search for more hydrocarbon solvent soluble derivatives of the parent ligand, 2,6-[Ph(2)P(O)CH(2)](2)C(5)H(3)NO (1a), a series of new ligands, 2,6-[R(2)P(O)CH(2)](2)C(5)H(3)NO [R = Bz (1b); Tol (1c); Et (1d); Pr (1e); Bu (1f); Pn (1g); Hx (1h); Hp (1i); and Oct (1j)] and 2,6-[RR'P(O)CH(2)](2)C(5)H(3)NO [R = Ph, R' = Bz (2a); R = Ph, R' = Me (2b); R = Ph, R' = Hx (2c); R = Ph, R' = Oct (2d)], have been prepared by either Arbusov or Grignard substitutions on 2,6-bis(chloromethyl)pyridine followed by N-oxidation. The new ligands have been characterized by spectroscopic methods, and their coordination chemistry with selected lanthanide ions has been surveyed. Several 1:1 and 2:1 ligand/metal complexes have been isolated, and single-crystal X-ray diffraction analyses for Nd(2a)(NO(3))(3), Er(2a)(NO(3))(3), Yb(1d)(NO(3))(3), and [Nd(1c)(2)](NO(3))(3) are described. The new structural data are discussed in relation to the structures of complexes formed by 1a.     

Unusual pathways for metal-assisted C[bond]C and C[bond]P coupling reactions using allenylidenerhodium complexes as precursors

The rhodium allenylidenes trans-[RhCl[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] [R = Ph (1), p-Tol (2)] react with NaC(5)H(5) to give the half-sandwich type complexes [(eta(5)-C(5)H(5))Rh[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))] (3, 4). The reaction of 1 with the Grignard reagent CH(2)[double bond]CHMgBr affords the eta(3)-pentatrienyl compound [Rh(eta(3)-CH(2)CHC[double bond]C[double bond]CPh(2))(PiPr(3))(2)] (6), which in the presence of CO rearranges to the eta(1)-pentatrienyl derivative trans-[Rh[eta(1)-C(CH[double bond]CH(2))[double bond]C[double bond]CPh(2)](CO)(PiPr(3))(2)] (7). Treatment of 7 with acetic acid generates the vinylallene CH(2)[double bond]CH[bond]CH[double bond]=C=CPh(2) (8). Compounds 1 and 2 react with HCl to give the five-coordinate allenylrhodium(III) complexes [RhCl(2)[CH[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] (10, 11). An unusual [C(3) + C(2) + P] coupling process takes place upon treatment of 1 with terminal alkynes HC[triple bond]CR', leading to the formation of the eta(3)-allylic compounds [RhCl[eta(3)-anti-CH(PiPr(3))C(R')C[double bond]C[double bond]CPh(2)](PiPr(3))] [R' = Ph (12), p-Tol (13), SiMe(3) (14)]. From 12 and RMgBr the corresponding phenyl and vinyl rhodium(I) derivatives 15 and 16 have been obtained. The previously unknown unsaturated ylide iPr(3)PCHC(Ph)[double bond]C[double bond]C[double bond]CPh(2) (17) was generated from 12 and CO. A [C(3) + P] coupling process occurs on treatment of the rhodium allenylidenes 1, 2, and trans-[RhCl[[double bond]C[double bond]C[double bond]C(p-Anis)(2)](PiPr(3))(2)] (20) with either Cl(2) or PhICl(2), affording the ylide-rhodium(III) complexes [RhCl(3)[C(PiPr(3))C[double bond]C(R)R'](PiPr(3))] (21-23). The butatrienerhodium(I) compounds trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C[double bond]C(R)R'](PiPr(3))(2)] (28-31) were prepared from 1, 20, and trans-[RhCl[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] [R = CF(3) (26), tBu (27)] and diazomethane; with the exception of 30 (R = CF(3), R' = Ph), they thermally rearrange to the isomers trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C[double bond]C(R)R'](PiPr(3))(2)] (32, 33, and syn/anti-34). The new 1,1-disubstituted butatriene H(2)C[double bond]C[double bond]C[double bond]C(tBu)Ph (35) was generated either from 31 or 34 and CO. The iodo derivatives trans-[RhI(eta(2)-H(2)C[double bond]C[double bond]C[double bond]CR(2))(PiPr(3))(2)] [R = Ph (38), p-Anis (39)] were obtained by an unusual route from 1 or 20 and CH(3)I in the presence of KI. While the hydrogenation of 1 and 26 leads to the allenerhodium(I) complexes trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] (40, 41), the thermolysis of 1 and 20 produces the rhodium(I) hexapentaenes trans-[RhCl(eta(2)-R(2)C[double bond]C[double bond]C[double bond]C[double bond]C[double bond]CR(2))(PiPr(3))(2)] (44, 45) via C-C coupling. The molecular structures of 3, 7, 12, 21, and 28 have been determined by X-ray crystallography.     

Mono{hydrotris(mercaptoimidazolyl)borato} complexes of manganese(II), iron(II), cobalt(II), and nickel(II) halides

A series of [Tm(Me)M(mu-Cl)]2 and Tm(R)MCl (Tm(R) = tris(mercaptoimidazolyl)borate; R = Me, tBu, Ph, 2,6-iPr2C6H3 (Ar); M = Mn, Fe, Co, Ni) complexes have been prepared by treatment of NaTm(Me) or LiTm(R) with an excess amount of metal(II) chlorides, MCl2. Treatment of Tm(R)MCl (R = tBu, Ph, Ar) with NaI led to a halide exchange to afford Tm(R)MI. The molecular structures of [Tm(Me)M(mu-Cl)]2 (M = Mn, Ni), [Tm(Me)Ni(mu-Br)]2, Tm(tBu)MCl (M = Fe, Co), Tm(Ph)MCl (M = Mn, Fe, Co, Ni), Tm(Ar)MCl (M = Mn, Fe, Co, Ni), Tm(Ph)MI (M = Mn, Co), and Tm(Ar)MI (M = Fe, Co, Ni) have been determined by X-ray crystallography. The Tm(R) ligands occupy the tripodal coordination site of the metal ions, giving a square pyramidal or trigonal bipyramidal coordination geometry for Tm(Me)M(mu-Cl)]2 and a tetrahedral geometry for the Tm(R)MCl complexes, where the S-M-S bite angles are larger than the reported N-M-N angles of the corresponding hydrotris(pyrazolyl)borate (Tp(R)) complexes. Treatment of Tm(Ph)2Fe with excess FeCl2 affords Tm(Ph)FeCl, indicating that Tm(R)2M as well as Tm(R)MCl is formed at the initial stage of the reaction between MCl2 and the Tm(R) anion.     

The versatile reactivity of cyclo-(P5tBu4)- with complexes of the nickel triad

Na[cyclo-(P(5)tBu(4))] (1) reacts with [NiCl(2)(PEt(3))(2)] and [PdCl(2)(PMe(2)Ph)(2)] with elimination of tBuCl and formation of the corresponding metal(0) cyclopentaphosphene complexes [Ni{cyclo-(P(5)tBu(3))}(PEt(3))(2)] (2) and [Pd{cyclo-(P(5)tBu(3))}(PMe(2)Ph)(2)] (3). In contrast, complexes with the more labile triphenylphosphane ligand, such as [MCl(2)(PPh(3))(2)] (M=Ni, Pd), react with 1 with formation of [NiCl{cyclo-(P(5)tBu(4))}(PPh(3))] (4) and [Pd{cyclo-(P(5)tBu(4))}(2)] (5), respectively, in which the cyclo-(P(5)tBu(4)) ligand is intact. In the case of palladium, the cyclopentaphosphene complex [Pd{cyclo-(P(5)tBu(3))}(PPh(3))(2)] (6) in trace amounts is also formed. However, [Ni{cyclo-(P(5)tBu(4))}(2)] (7) is easily obtained by reaction of two equivalents of 1 and one equivalent of [NiCl(2)(bipy)] at room temperature. Complex 7 rearranges on heating in n-hexane or toluene to the previously unknown [Ni{cyclo-(P(5)tBu(4))PtBu}{cyclo-(P(4)tBu(3))}] (8), which presumably is formed via the intermediate [Ni{cyclo-(P(5)tBu(4))}{cyclo-(P(4)tBu(3))PtBu}], which, after an unexpected and unprecedented phosphanediide migration, gives 8, but always as an inseparable mixture with 7. In the reaction of 1 with [PtCl(2)(PPh(3))(2)], ring contraction and formation of [PtCl{cyclo-(P(4)tBu(3))PtBu}(PMe(2)Ph)] (9) is observed. Complexes 3-5 and 7-9 were characterised by (31)P NMR spectroscopy, and X-ray structures were obtained for 5-9.     

The bridging function of an apparently nonbridging ligand: dinuclear rhodium complexes with Rh(mu-SbR3)Rh as a molecular unit

Novel dinuclear rhodium complexes of the general composition [Rh2Cl2(mu-CRR')2(mu-SbiPr3)] (4-6) were prepared by thermolysis of the mononuclear precursors trans-[RhCl(=CRR')(SbiPr3)2] in excellent yield. The X-ray crystal structure analysis of 4 (R = R' = Ph) confirms the symmetrical bridging position of the stibane ligand. Related compounds [Rh2Cl2(mu-CPh2)(mu-CRR')(mu-SbiPr3)] (7, 8) with two different carbene units were obtained either from trans-[RhCl(=CPh2)(SbiPr3)2] (1) and RR'CN2 or by a conproportionation of 4 and 5 (R = R' = p-Tol) or 4 and 6 (R= Ph, R' = p-Tol), respectively. While CO reacts with 4 to give the polymeric product [[RhCl(CPh2)(CO)]n] (9), tert-butyl isocyanide replaces the bridging stibane and yields [Rh2Cl2(mu-CPh2)2(mu-CNtBu)] (10). The reaction of 4 with tertiary phosphanes PR3 leads to complete bridge cleavage and affords the mononuclear compounds trans-[RhCl(=CPh2)(PR3)2] (11-15). In contrast, treatment of 4 with SbMe3 and SbEt3 yields the related triply bridged complexes [Rh2Cl2(mu-CPh2)2(mu-SbR3)] (16, 17) by substitution of SbiPr3 for the smaller stibanes. The displacement of the chloro ligands in 4-6 and 10 by n5-cyclopentadienyl gives the dinuclear complexes [(n5-C5H5)2Rh2(mu-CRR')2] (18-20) and [(n5-C5H5)2Rh2(mu-CPh2)2(mu-CNtBu)] (21), of which 18 (R = R' = Ph) was characterized crystallographically.     

Phenolate and phenoxyl radical complexes of Co(II) and Co(III)

The new phenol-imidazole pro-ligands (R)LH react with Co(BF(4))(2).6H(2)O in the presence of Et(3)N to form the corresponding [Co(II)((R)L)(2)] compound (R = Ph (1), PhOMe (2), or Bz (3)). Also, (Bz)LH, reacts with Co(ii) in the presence of Et(3)N and H(2)O(2) to form [Co(III)((Bz)L)(3)](4). The structures of 1.2.5MeCN, 2.2DMF, 3.4MeOH, and 4.4DMF have been determined by X-ray crystallography. 1, 2, and 3 each involve Co(II) bound to two N,O-bidentate ligands with a distorted tetrahedral coordination sphere; 4 involves Co(III) bound to three N,O-bidentate ligands in a mer-N(3)O(3) distorted octahedral geometry. [Co(II)((R)L)(2)](R = Ph or PhOMe) undergo two, one-electron, oxidations. The products of the first oxidation, [1](+) and [2](+), have been synthesised by the chemical oxidation of 1 and 2, respectively; these cations, formulated as [Co(II)((R)L*)((R)L)(2)](+), comprise one phenoxyl radical and one phenolate ligand bound to Co(II) and are the first phenoxyl radical ligand complexes of tetra-coordinated Co(II). 4 undergoes two, one-electron, ligand-based oxidations, the first of which produces [4](+), [Co(III)((Bz)L*)((Bz)L)(2)](+). Unlike [1](+) and [2](+), product of the one-electron oxidation of [Co(II)((Bz)L)(2)], [3](+), is unstable and decomposes to produce [4](+). These studies have demonstrated that the chemical properties of [M(II)((R)L*)((R)L)(2)](+)(M = Co, Cu, Zn) are highly dependent on the nature of both the ligand and the metal centre.     

Synthesis of [Ag(NH=CMe(2))(2)]ClO(4) and its use as a source of acetimine. 1. Synthesis of the first acetimine rhodium complexes and the first crystal structure of a diacetonamine complex

The reaction of AgClO(4) and NH(3) in acetone gave [Ag(NH=CMe(2))(2)]ClO(4) (1). The reactions of 1 with [RhCl(diolefin)](2) or [RhCl(CO)(2)](2) (2:1) gave the bis(acetimine) complexes [Rh(diolefin)(NH=CMe(2))(2)]ClO(4) [diolefin = 1,5 cyclooctadiene = cod (2), norbornadiene = nbd (3)] or [Rh(CO)(2)(NH=CMe(2))(2)]ClO(4) (4), respectively. Mono(acetimine) complexes [Rh(diolefin)(NH=CMe(2))(PPh(3))]ClO(4) [diolefin = cod (5), nbd (6)] or [RhCl(diolefin)(NH=CMe(2))] [diolefin = cod (7), nbd (8)] were obtained by reacting 2 or 3 with PPh(3) (1:1) or with Me(4)NCl (1:1.1), respectively. The reaction of 4 with PR(3) (R = Ph, To, molar ratio 1:2) led to [Rh(CO)(NH=CMe(2))(PR(3))(2)]ClO(4) [R = Ph (9), C(6)H(4)Me-4 = To (10)] while cis-[Rh(CO)(NH=CMe(2))(2)(PPh(3))]ClO(4) (11) was isolated from the reaction of 1 with [RhCl(CO)(PPh(3))](2) (1:1). The crystal structures of 5 and [Ag[H(2)NC(Me)(2)CH(2)C(O)Me](PTo(3))]ClO(4) (A), a product obtained in a reaction between NH(3), AgClO(4), and PTo(3), have been determined.     

Phenoxyl radicals: H-bonded and coordinated to Cu(II) and Zn(II)

Two pro-ligands ((R)LH) comprised of an o,p-di-tert-butyl-substituted phenol covalently bonded to a benzimidazole ((Bz)LH) or a 4,5-di-p-methoxyphenyl substituted imidazole ((PhOMe)LH), have been structurally characterised. Each possesses an intramolecular O-H[dot dot dot]N hydrogen bond between the phenolic O-H group and an imidazole nitrogen atom and (1)H NMR studies show that this bond is retained in solution. Each (R)LH undergoes an electrochemically reversible, one-electron, oxidation to form the [(R)LH] (+) radical cation that is considered to be stabilised by an intramolecular O...H-N hydrogen bond. The (R)LH pro-ligands react with M(BF(4))(2).H(2)O (M = Cu or Zn) in the presence of Et(3)N to form the corresponding [M((R)L)(2)] compound. [Cu((Bz)L)(2)] (), [Cu((PhOMe)L)(2)] (), [Zn((Bz)L)(2)] and [Zn((PhOMe)L)(2)] have been isolated and the structures of .4MeCN, .2MeOH, .2MeCN and .2MeCN determined by X-ray crystallography. In each compound the metal possesses an N(2)O(2)-coordination sphere: in .4MeCN and .2MeOH the {CuN(2)O(2)} centre has a distorted square planar geometry; in .2MeCN and .2MeCN the {ZnN(2)O(2)} centre has a distorted tetrahedral geometry. The X-band EPR spectra of both and , in CH(2)Cl(2)-DMF (9 : 1) solution at 77 K, are consistent with the presence of a Cu(ii) complex having the structure identified by X-ray crystallography. Electrochemical studies have shown that each undergo two, one-electron, oxidations; the potentials of these processes and the UV/vis and EPR properties of the products indicate that each oxidation is ligand-based. The first oxidation produces [M(II)((R)L)((R)L )](+), comprising a M(ii) centre bound to a phenoxide ((R)L) and a phenoxyl radical ((R)L ) ligand; these cations have been generated electrochemically and, for R = PhOMe, chemically by oxidation with Ag[BF(4)]. The second oxidation produces [M(II)((R)L )(2)](2+). The information obtained from these investigations shows that a suitable pro-ligand design allows a relatively inert phenoxyl radical to be generated, stabilised by either a hydrogen bond, as in [(R)LH] (+) (R = Bz or PhOMe), or by coordination to a metal, as in [M(II)((R)L)((R)L )](+) (M = Cu or Zn; R = Bz or PhOMe). Coordination to a metal is more effective than hydrogen bonding in stabilising a phenoxyl radical and Cu(ii) is slightly more effective than Zn(II) in this respect.     

Hypervalent neutral O-donor ligand complexes of silicon tetrafluoride, comparisons with other group 14 tetrafluorides and a search for soft donor ligand complexes

The hypervalent adducts of SiF(4), trans-[SiF(4)(R(3)PO)(2)] (R = Me, Et or Ph), cis-[SiF(4){R(2)P(O)CH(2)P(O)R(2)}] (R = Me or Ph), cis-[SiF(4)(pyNO)(2)] and trans-[SiF(4)(DMSO)(2)] have been prepared from SiF(4) and the ligands in anhydrous CH(2)Cl(2), and characterised by microanalysis, IR and VT multinuclear ((1)H, (19)F, (31)P) NMR spectroscopy. The NMR studies show extensive dissociation at ambient temperatures in non-coordinating solvents, but mixtures of cis and trans isomers of the monodentate ligand complexes were identified at low temperatures. Crystal structures are reported for trans-[SiF(4)(R(3)PO)(2)] (R = Me or Ph), and cis-[SiF(4)(pyNO)(2)]. The GeF(4) analogues cis-[GeF(4){R(2)P(O)(CH(2))(n)P(O)R(2)}] (R = Me or Ph, n = 1; R = Ph, n = 2) were similarly characterised and the structures of cis-[GeF(4){R(2)P(O)CH(2)P(O)R(2)}] (R = Me or Ph) determined. The reaction of R(3)AsO (R = Me or Ph) with SiF(4) does not give simple adducts, but forms [R(3)AsOH](+) cations as fluorosilicate salts. SiF(4) adducts of some ether ligands (including THF, 12-crown-4) were also characterised by (19)F NMR spectroscopy in solution at low temperatures (～190 K), but are fully dissociated at room temperature. Attempts to isolate, or even to identify, SiF(4) adducts with phosphine or thioether ligands in solution at 190 K were unsuccessful, contrasting with the recent isolation and detailed characterisation of GeF(4) analogues. The chemistry of SiF(4) with these oxygen donor ligands, and with soft donors (P, As, S or Se), is compared and contrasted with those of GeF(4), SnF(4) and SiCl(4). The key energy factors determining stability of these complexes are discussed.     

Comparison of structure and reactivity of phosphine-amido and hemilabile phosphine-amine chelates of rhodium

A series of mono- and binuclear rhodium(I) complexes bearing ortho-phosphinoanilido and ortho-phosphinoaniline ligands has been synthesized. Reactions of the protic monophosphinoanilines, Ph(2)PAr or PhPAr(2) (Ar = o-C(6)H(4)NHMe), with 0.5 equiv of [Rh(μ-OMe)(COD)](2) result in the formation of the neutral amido complexes, [Rh(COD)(P,N-Ph(2)PAr(-))] or [Rh(COD)(P,N-PhP(Ar(-))Ar)] (Ar(-) = o-C(6)H(4)NMe(-)), respectively, through stoichiometrically controlled deprotonation of an amine by the internal methoxide ion. Similarly, the binuclear complex, [Rh(2)(COD)(2)(μ-P,N,P',N'-mapm(2-))] (mapm(2-) = Ar(Ar(-))PCH(2)P(Ar(-))Ar), can be prepared by reaction of the protic diphosphinoaniline, mapm (Ar(2)PCH(2)PAr(2)), with 1 equiv of [Rh(μ-OMe)(COD)](2). An analogous series of hemilabile phosphine-amine compounds can be generated by reactions of monophosphinoanilines, Ph(2)PAr' or PhPAr'(2) (Ar' = o-C(6)H(4)NMe(2)), with 1 equiv of [Rh(NBD)(2)][BF(4)] to generate [Rh(NBD)(P,N-Ph(2)PAr')][BF(4)] or [Rh(NBD)(P,N-PhPAr'(2))][BF(4)], respectively, or by reactions of diphosphinoanilines, mapm or dmapm (Ar'(2)PCH(2)PAr'(2)), with 2 equiv of the rhodium precursor to generate [Rh(2)(NBD)(2)(μ-P,N,P',N'-mapm)][BF(4)](2) or [Rh(2)(NBD)(2)(μ-P,N,P',N'-dmapm)][BF(4)](2), respectively. Displacement of the diolefin from [Rh(COD)(P,N-Ph(2)PAr(-))] by 1,2-bis(diphenylphosphino)ethane (dppe) yields [Rh(P,P'-dppe)(P,N-Ph(2)PAr(-))] which, while unreactive to H(2), reacts readily and irreversibly with oxygen to form the peroxo complex, [RhO(2)(P,P'-dppe)(P,N-Ph(2)PAr(-))], and with iodomethane to yield [RhI(CH(3))(P,P'-dppe)(P,N-Ph(2)PAr(-))]. Hemilabile phosphine-amine compounds can also be prepared by reactions of [Rh(P,P'-dppe)(P,N-Ph(2)PAr(-))] with Me(3)OBF(4) or HBF(4)·Et(2)O, resulting in (thermodynamic) additions at nitrogen to form [Rh(P,P'-dppe)(P,N-Ph(2)PAr')][BF(4)] or [Rh(P,P'-dppe)(P,N-Ph(2)PAr)][BF(4)], respectively. The nonlabile phosphine-amido and hemilabile phosphine-amine complexes were tested as catalysts for the silylation of styrene. The amido species do not require the use of solvents in reaction media, can be easily removed from product mixtures by protonation, and appear to be more active than their hemilabile, cationic congeners. Reactions catalyzed by either amido or amine complexes favor dehydrogenative silylation in the presence of excess olefin, showing modest selectivities for a single vinylsilane product. The binuclear complexes, which were prepared in an effort to explore possible catalytic enhancements of reactivity due to metal-metal cooperativity, are in fact somewhat less active than mononuclear species, discounting this possibility.     

In situ NMR observation of mono- and binuclear rhodium dihydride complexes using parahydrogen-induced polarization

Starting from the binuclear complex [RhCl(NBD)]2 (NBD = 2,5-norbornadiene) in the presence of the phosphines L = PMe3, PMe2Ph, PMePh2, PEt3, PEt2Ph, PEtPh2, or P(n-butyl)3, various mononuclear dihydrides of the type Rh(H)2CIL3, i.e., those of the homogeneous hydrogenation catalysts RhCIL3, have been obtained upon addition of parahydrogen, and their 1H NMR spectra have been investigated using parahydrogen-induced polarization (PHIP). Furthermore, the two binuclear complexes (H)(Cl)Rh(PMe3)2(mu-Cl)(mu-H)Rh(PMe3) and (H)(Cl)Rh(PMe2Ph)2(mu-Cl)(mu-H)Rh(PMe2Ph) have been detected and characterized by means of this in situ NMR method. Analogous complexes with trifluoroacetate instead of chloride, i.e., Rh(H)2(CF3COO)L3, have been generated in situ starting from Rh(NBD)(acac) in the presence of trifluoroacetic acid in combination with the phosphines L = PPh3, PEt2Ph, PEt3, and P(n-butyl)3, and their 1H NMR parameters have been determined.     

Mechanism of Formation of Peroxocarbonates RhOOC(O)O(Cl)(P)(3) and Their Reactivity as Oxygen Transfer Agents Mimicking Monooxygenases. The First Evidence of CO(2) Insertion into the O-O Bond of Rh(eta(2)-O(2)) Complexes

Extended labeling experiments have shown that formation of rhodium peroxocarbonate from CO(2) and [RhCl(eta(2)-O(2))(P)(3)] (P is PEt(2)Ph or PEtPh(2)) proceeds through O-O bond cleavage and CO(2) insertion. O-transfer to ancillary phosphine ligand to give R(3)P=O selectively (>85%) involves the Rh-linked O atom of the peroxo group of RhCl(CO(4))(P)(3).