Liquid structure of room-temperature ionic liquid, 1-Ethyl-3-methylimidazolium bis-(trifluoromethanesulfonyl) imide

The liquid structure of 1-ethyl-3-methylimidazolium bis-(trifluoromethanesulfonyl) imide (EMI(+)TFSI(-)) has been studied by means of large-angle X-ray scattering (LAXS), (1)H, (13)C, and (19)F NMR, and molecular dynamics (MD) simulations. LAXS measurements show that the ionic liquid is highly structured with intermolecular interactions at around 6, 9, and 15 A. The intermolecular interactions at around 6, 9, and 15 A are ascribed, on the basis of the MD simulation, to the nearest neighbor EMI(+)...TFSI(-) interaction, the EMI(+)...EMI(+) and TFSI(-)...TFSI(-) interactions, and the second neighbor EMI+...TFSI(-) interaction, respectively. The ionic liquid involves two conformers, C(1) (cis) and C(2) (trans), for TFSI(-), and two conformers, planar cis and nonplanar staggered, for EMI(+), and thus the system involves four types of the EMI(+)...TFSI(-) interactions in the liquid state by taking into account the conformers. However, the EMI(+)...TFSI(-) interaction is not largely different for all combinations of the conformers. The same applies alsoto the EMI(+)...EMI(+) and TFSI(-)...TFSI(-) interactions. It is suggested from the 13C NMR that the imidazolium C(2) proton of EMI(+) strongly interacts with the O atom of the -SO(2)(CF(3)) group of TFSI(-). The interaction is not ascribed to hydrogen-bonding, according to the MD simulation. It is shown that the liquid structure is significantly different from the layered crystal structure that involves only the nonplanar staggered EMI(+) and C(1) TFSI(-) conformers.     

离子液体凝胶聚合物电解质的三元组分相互作用研究

采用Raman光谱、傅里叶转换红外光谱和X-射线衍射光谱研究N-甲基-N-丙基哌啶双三氟甲磺酸亚胺离子液体（PP13TFSI）和双三氟甲磺酸亚胺锂盐（LiTFSI）对PVDF-HFP聚合物聚合方式的影响,结果表明,PP13TFSI、LiTFSI和PVDF-HFP是共混存在的,同时加入PP13TFSI和LiTFSI会使聚合物的聚合方式由晶体结构转变为无定形结构. 通过对电解质及其各组分的线性扫描伏安曲线和热重曲线分析可知,溶剂N-甲基吡咯烷酮（NMP）容易残留在凝胶聚合物电解质（ILGPE）中,这会降低ILGPE的电化学稳定性和热稳定性. 作者对固态LiFePO₄|ILGPE|Li电池的倍率性能进行了研究,实验结果表明其具有较好的倍率性能,当电池倍率由C/10增大至2C,然后再回到C/10时,其容量可以恢复到原来的90.9%左右. 该研究结果对理解PP13TFSI和LiTFSI在ILGPE中的作用机理具有重要的意义.     

Formation of ionic liquid submicron particles. 1H and 19F nuclear magnetic resonance spectroscopic studies

We prepared novel ionic liquid submicron particles (ILSPs) in water by emulsifying the ionic liquid (IL) N-(2-methoxyethyl)-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (Pyr_12O1TFSI), which is immiscible with water, with the nonionic surfactants Tween 20 and Span 80. The mean particle size and zeta potential of the ILSPs were about 580?nm and ?30?mV, respectively. The ILSPs were characterized using ¹H and ¹⁹F nuclear magnetic resonance (NMR) spectroscopic methods. The chemical shifts of the Pyr_12O1⁺ cation and TFSI^? anion in the ¹H and ¹⁹F NMR spectra of the ILSP suspension were consistent with those corresponding to pure Pyr_12O1TFSI. This indicated that most of the Pyr_12O1TFSI was still in the IL state in the ILSP suspension. In addition, ¹H–¹H nuclear Overhauser effect correlated spectroscopic measurements showed that the ILSP droplets contained Pyr_12O1TFSI in the neat IL steric state even in the ILSP suspension, and Pyr_12O1TFSI species localized in the droplet surfaces interacted with the hydrophobic acyl side chains of the surfactants. These NMR spectroscopic results show that the ILSPs formed an IL-in-water microemulsion in which droplets of neat Pyr_12O1TFSI were surrounded by the two surfactants, that is, Tween 20 and Span 80.     

Transport coefficients, Raman spectroscopy, and computer simulation of lithium salt solutions in an ionic liquid

Lithium salt solutions of Li(CF3SO2)2N, LiTFSI, in a room-temperature ionic liquid (RTIL), 1-butyl-2,3-dimethyl-imidazolium cation, BMMI, and the (CF3SO2)2N(-), bis(trifluoromethanesulfonyl)imide anion, [BMMI][TFSI], were prepared in different concentrations. Thermal properties, density, viscosity, ionic conductivity, and self-diffusion coefficients were determined at different temperatures for pure [BMMI][TFSI] and the lithium solutions. Raman spectroscopy measurements and computer simulations were also carried out in order to understand the microscopic origin of the observed changes in transport coefficients. Slopes of Walden plots for conductivity and fluidity, and the ratio between the actual conductivity and the Nernst-Einstein estimate for conductivity, decrease with increasing LiTFSI content. All of these studies indicated the formation of aggregates of different chemical nature, as it is corroborated by the Raman spectra. In addition, molecular dynamics (MD) simulations showed that the coordination of Li+ by oxygen atoms of TFSI anions changes with Li+ concentration producing a remarkable change of the RTIL structure with a concomitant reduction of diffusion coefficients of all species in the solutions.     

NMR investigation of ionic liquid-LiX mixtures: pyrrolidinium cations and TFSI- anions

In this paper is reported an extensive NMR characterization of N-methyl-N-propyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR13TFSI) room-temperature ionic liquid and its mixtures with LiTFSI. NMR was used to investigate the interactions between the ionic liquid and lithium salt and the diffusion coefficients of all ionic species present in these mixtures. The results are compared with previous DSC, Raman, and electrochemical investigations.     

Lithium solvation in bis(trifluoromethanesulfonyl)imide-based ionic liquids

The lithium solvation in (1 -x)(EMI-TFSI), xLiTFSI ionic liquids where EMI(+) is the 1-ethyl-3-methylimidazolium cation and TFSI(-) the bis(trifluoromethanesulfonyl)imide anion, is shown by Raman spectroscopy to involve essentially [Li(TFSI)(2)](-) anionic clusters for 0 < x < 0.4, but addition of stoichiometric amounts of solvents S such as oligoethers changes the lithium solvation into [Li(S)(m)](+) cationic clusters; the lithium transference number in TFSI-based ionic liquid electrolytes for lithium batteries should thus be strongly improved.     

核磁方法研究离子液体与丙酮的相互作用

运用核磁共振手段, 研究了室温离子液体1-辛基-3-甲基咪唑四氟硼酸盐([C8mim][BF4])在不同比例的离子液体／丙酮混合体系中1H和13C的化学位移及13C的自旋-晶格弛豫时间(T1). 结果表明, 离子液体[C8mim][BF4]的阳离子芳环上的氢原子, 以及与氮原子直接相连的甲基和亚甲基上的氢原子都与丙酮羰基上的氧原子有相互作用, 从而减弱了离子液体阴阳离子间的强相互作用, 使离子液体的运动加快, 黏度降低.     

Existing condition and migration property of ions in lithium electrolytes with ionic liquid solvent

Ionization conditions of each ionic species in lithium ionic liquid electrolytes, LiTFSI/BMI-TFSI and LiTFSI/BDMI-TFSI, were confirmed based on the diffusion coefficients of the species measured by the pulsed gradient spin-echo (PGSE) NMR technique. We found that the diffusion coefficient ratios of the cation and anion species D(Li)(obs)/D(F)(obs) of the lithium salt and D(H)(obs)/D(F)(obs) of the ionic liquid solvent were effective guides to evaluate the ionization condition responsible for their mobility. Lithium ions were found to be stabilized, forming the solvated species as Li(TFSI)3(2-). TFSI- anion coordination could be relaxed by the dispersion of silica to form a gel electrolyte, LiTFSI/BDMI-TFSI/silica. It is expected that the oxygen sites on the silica directly attract Li+, releasing the TFSI- coordination. The lithium species, loosing TFSI- anions, kept a random walk feature in the gel without the diffusion restriction attributed from the strong chemical and morphological effect as that in the gel with the polymer. We can conclude that the silica dispersion is a significant approach to provide the appropriate lithium ion condition as a charge-transporting species in the ionic liquid electrolytes.     

Raman investigation of the ionic liquid N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide and its mixture with LiN(SO2CF3)2

A preliminary Raman investigation of the ionic liquid N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR(13)TFSI) and its 2/1 complex with the lithium salt LiN(SO(2)CF(3))(2) is reported. The study was performed over a temperature range extending from -100 to +60 degrees C, i.e., with PYR(13)TFSI in the crystalline and melt states. For comparison purposes, the study was extended to PYR(13)I, which is the precursor used in the synthesis of PYR(13)TFSI.     

Structural characterization of a lanthanum bistriflimide complex, La(N(SO2CF3)2)3(H2O)3, and an investigation of La, Sm, and Eu electrochemistry in a room-temperature ionic liquid, [Me3N(n)Bu][N(SO2CF3)2

The reduction of selected lanthanide cations to the zerovalent state in the room-temperature ionic liquid [Me3N(n)Bu][TFSI] is reported (where TFSI = bistriflimide, [N(SO2CF3)2]-). The lanthanide cations were introduced to the melt as the TFSI hydrate complexes [Ln(TFSI)3(H2O)3] (where Ln = La(III), Sm(III) or Eu(III)). The lanthanum compound [La(TFSI)3(H2O)3] has been crystallographically characterized, revealing the first structurally characterized f-element TFSI complex. The lanthanide in all three complexes was shown to be reducible to the metallic state in [Me3N(n)Bu][TFSI]. For both the Eu and Sm complexes, reduction to the metallic state was achieved via divalent species, and there was an additional observation of the electrodeposition of Eu metal.     

Cyclic voltammetry of Th(IV) in the room-temperature ionic liquid [Me3NnBu][N(SO2CF3)2

A Th(IV) compound, [Th(TFSI)4(HTFSI)].2H2O [where TFSI = N(SO2CF3)2], has been synthesized and characterized using elemental analysis, thermogravimetric analysis, and vibrational spectroscopy. The analysis suggests that the TFSI anion coordinates to the metal center via the sulfonyl oxygens as well as provides evidence for the coordination of HTFSI. The voltammetric behavior of this compound has been studied in the room-temperature ionic liquid [Me3NnBu][TFSI], and results show that Th(IV) is reduced to Th(0) in this ionic liquid in a single reduction step. Analysis of cyclic voltammograms shows that an insoluble product is being formed at the electrode surface, which is attributed to the formation of ThO2 by reaction with water. The E0 value for the reduction of Th(IV) to Th(0) has been determined to be -2.20 V (vs Fc+/Fc; -1.80 V vs SHE). A comparison of this E0 value with those obtained for Th(IV) reduction in a LiCl-KCl eutectic (400 degrees C), water, and nonaqueous solvents shows that the reduction in [Me3NnBu][TFSI] is easier to accomplish than that in these other solvents.     

溴代1-己基-3-甲基咪唑离子液体与丙酮的相互作用

1H and 13C NMR chemical shifts were determined to investigate the interactions of acetone with a room temperature ionic liquid 1-hexyl-3- methylimidazolium bromide C6mimBr at various mole fractions. Changes in chemical shifts of hydrogen nuclei and of carbon nuclei with the acetone concentration indicated the formation of hydrogen bond between anion of the ionic liquid and methyl protons of acetone. The NMR results were in good agreement with the ab initio computational results.     

Structural and NMR spectroscopic investigations of chair and twist conformers of the P2Se8(2-) anion

Four new salts of the P2Se8(2-) anion have been prepared, starting from easily available reagents using different reaction strategies including reaction of the elements, oxidation of P4Se3 with alkalimetal diselenides and elemental selenium, and the use of an ionic liquid as a reaction medium. Multinuclear NMR investigations show the presence of both chair-P2Se8(2-) and twist-P2Se8(2-) in solution, with twist-P2Se8(2-) being the predominant conformer. The interconversion between the two conformers is slow on the NMR time scale. Structural investigations of the new salts by single-crystal X-ray diffraction show that chair-P2Se8(2-) is the conformer mostly found in the solid state. A first structural characterization of twist-P2Se8(2-) is reported. The bonding situation in the P2Se8(2-) anion as well as the relative stability of the chair, twist, and boat conformers was elucidated by quantum chemical calculations.     

A disiloxane-functionalized phosphonium-based ionic liquid as electrolyte for lithium-ion batteries

A disiloxane-functionalized ionic liquid based on a phosphonium cation and a bis(trifluoromethylsulfonyl)imide (TFSI) anion was synthesized and characterized. This new ionic liquid electrolyte showed good stability with a lithium transition metal oxide cathode and a graphite anode in lithium ion cells.     

Effect of lithium salt on the stability of dispersions of fumed silica in the ionic liquid BMImBF4

We have investigated the stability and interactions in dispersions of colloidal fumed silica, Aerosil 200, and the ionic liquid 1-butyl-3-methylimidazolium tetraflouroborate (BMImBF(4)) as a function of the Li salt concentration (LiBF(4)). Photon correlation spectroscopy was used to study the aggregation behavior at low silica concentrations, and Raman spectroscopy was used to investigate the interactions in the ionic liquid and with the silica surface. We find that the addition of LiBF(4) increases the stability of the dispersions, with smaller agglomerates of silica particles and higher gelation concentrations in the presence of Li salt. The increased stability with the addition of Li salt is explained by the formation of a more stable solvation layer, where Li ions accumulate on the surface. This leads to an increased interaction between lithium ions and the BF(4)(-) anions in the solvation layer, as seen by Raman spectroscopy. Upon gelation, the Li ions are expelled from the surface because hydrogen bonding between the silica particles are formed. For both neat BMImBF(4) and Li-salt-doped BMImBF(4)/silica dispersions, a weak gel phase was found preceding the formation of a strong gel at slightly higher silica concentrations.     

具有表面活性的功能化离子液体N-(三甲氧硅丙基)-N-甲基-2-吡咯烷酮盐酸盐的合成与表征

以N-甲基-2-吡咯烷酮和3-氯丙基三甲氧基硅烷单体为原料,利用SN2亲核取代反应合成具有一定表面活性的功能化离子液体N-(三甲氧硅丙基)-N-甲基-2-吡咯烷酮盐酸盐.通过元素分析、红外光谱和核磁共振对功能化离子液体进行表征,并测定了其表面张力和导电率.结果表明,合成的产物结构与其理论结构基本一致,具有较宽的液体温度范围和较低的表面张力,并具有较高的电导率,随着温度的升高,电导率逐渐增高.     

Spontaneous phase transfer of thermosensitive hairy particles between water and an ionic liquid

This article describes the temperature-induced phase transfer behavior of a series of thermosensitive polymer brush-grafted particles between water and a hydrophobic ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]). Six samples were made by surface-initiated atom transfer radical polymerization: silica particles grafted with poly(methoxypoly(ethylene glycol) methacrylate) (PPEGMMA) with two different molecular weights, poly(methoxytri(ethylene glycol) methacrylate) (PTEGMMA), poly(methoxydi(ethylene glycol) methacrylate) (PDEGMMA), and two copolymers of PEGMMA and TEGMMA with different compositions (P(PEGMMA-co-TEGMMA)-82 and P(PEGMMA-co-TEGMMA)-74). The cloud points of free PPEGMMA with M(n,SEC) of 23 and 40 kDa, P(PEGMMA-co-TEGMMA)-82, P(PEGMMA-co-TEGMMA)-74, and PTEGMMA in [EMIM][TFSI]-saturated water were 95, 94, 80, 72, and 43 °C, respectively. PDEGMMA was not soluble in the ionic liquid-saturated water. PPEGMMA brush-grafted particles moved spontaneously and completely from water to the [EMIM][TFSI] phase upon heating at 80 °C. When cooled to 22 °C, all particles returned to the water layer. From UV-vis absorbance measurements, the transfer temperature (T(tr)) of PPEGMMA-grafted particles from water to the ionic liquid was 42 °C. Thermodynamic analysis showed that the particle transfer was an entropically driven process. P(PEGMMA-co-TEGMMA)-82, P(PEGMMA-co-TEGMMA)-74, and PTEGMMA brush-grafted particles also underwent reversible and quantitative transfer between the two phases upon heating at 70 °C and cooling at 0 °C; their transfer temperatures from water to [EMIM][TFSI] were 36, 30, and 16 °C, respectively. T(tr) was a linear function of the cloud point of the corresponding free polymer in ionic liquid-saturated water. In contrast, PDEGMMA-grafted particles moved spontaneously to the ionic liquid layer upon heating but did not return to water even after prolonged stirring at 0 °C.     

Potential energy landscape of bis(fluorosulfonyl)amide

The conformational landscape of the bis(fluorosulfonyl)amide, [FSI]-, anion was analyzed using data obtained from Raman spectroscopy, molecular dynamics (MD), and ab initio studies. The plotting of three-dimensional potential energy surfaces and the corresponding MD simulation conformer-population histograms show the existence of two stable isomers, C2 (trans) and C1 (cis) conformers, and confirm the nature of the anion as a flexible molecule capable of interconversion between conformers in the liquid state. In ionic liquids, the two [FSI]- conformers coexist in equilibrium, a result confirmed by the Raman data. The implications of the conformational behavior of the ion [FSI]- are discussed in terms of the solvation properties of the corresponding ionic liquids.     

Lithium ion solvation in room-temperature ionic liquids involving bis(trifluoromethanesulfonyl) imide anion studied by Raman spectroscopy and DFT calculations

The solvation structure of the lithium ion in room-temperature ionic liquids 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide (EMI(+)TFSI(-)) and N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide (BMP(+0TFSI(-)) has been studied by Raman spectroscopy and DFT calculations. Raman spectra of EMI(+)TFSI(-) and BMP(+)TFSI(-) containing Li(+)TFSI(-) over the range 0.144-0.589 and 0.076-0.633 mol dm(-3), respectively, were measured at 298 K. A strong 744 cm-1 band of the free TFSI(-) ion in the bulk weakens with increasing concentration of the lithium ion, and it revealed by analyzing the intensity decrease that the two TFSI(-) ions bind to the metal ion. The lithium ion may be four-coordinated through the O atoms of two bidentate TFSI(-) ions. It has been established in our previous work that the TFSI(-) ion involves two conformers of C(1) (cis) and C(2) (trans) symmetries in equilibrium, and the dipole moment of the C(1) conformer is significantly larger than that of the C(2) conformer. On the basis of these facts, the geometries and SCF energies of possible solvate ion clusters [Li(C(1)-TFSI(-))(2)](-), [Li(C(1)-TFSI(-))(C(2)-TFSI(-))](-), and [Li(C(2)-TFSI(-))(2)](-) were examined using the theoretical DFT calculations. It is concluded that the C(1) conformer is more preferred to the C(2) conformer in the vicinity of the lithium ion.     

Ionization condition of lithium ionic liquid electrolytes under the solvation effect of liquid and solid solvents

Ionization condition and ionic structures of the lithium ionic liquid electrolytes, LiTFSI/EMI-TFSI/(PEG or silica), were investigated through the measurements of ionic conductivity and diffusion coefficient. The size of the hydrodynamic lithium species (rLi) evaluated from the Stokes-Einstein equation was 0.90 nm before gelation with the PEG or silica. This reveals that the TFSI- anions from the solvent are coordinated on Li+ for solvation, forming, for example, Li(TFSI)4(3-) and Li(TFSI)2- in the electrolyte solution. By the dispersion of PEG for gelation, rLi increased up to 1.8 nm with the 10 wt % of PEG. This indicates that the lithium species is directly interacted with the oxygen sites on the polymer chains and the lithium species migrate, reflecting the polymer by hopping from site to site. In case of the silica dispersion, rLi decreased to 0.7 nm at 10 wt % silica. Although the silica surface with silanol groups fundamentally attracts Li+, the lithium does not migrate from site to site on the silica surface as in the gel of the polymer and follows random walk behavior in the network of the liquid-phase pathways in the two-phase gel. In the process, that solvated TFSI- anions are partially removed may be due to the attractive effect of H+, which was dissociated from the silanol group. It is concluded that the dispersed silica is effective to modify the hydrodynamic lithium species to be appropriate for charge transport as reducing the size and anionic charge of Li(TFSI)4(3-) by removing one or two TFSI- anions.