Helical twisting power and compatibility in twisted nematic phase of new chiral liquid crystalline dopants with various liquid crystalline matrices

ABSTRACT

Four chiral dopants exhibiting smectic LC phases themselves were prepared and their helical twisting power (HTP) and thermal phase behaviour in mixtures with four various LC hosts were studied. The influence of host liquid crystal on HTP was evaluated and generally higher values were found for hosts with high birefringence. Unexpectedly, high enhancement was found for an LC-chiral dopant pair, both having a similar aromatic core – biphenyl ring substituted with polar group. All studied chiral dopants exhibited limited compatibility with the LC hosts in twisted nematic phase at room temperature. For one of the studied mixtures, it was able to obtain single twisted nematic phase with selective light reflection band with maximum at wavelength about 1.0 µm. Carboxylic acid-type dopants exhibited total compatibility with the studied host in single twisted nematic phase at elevated temperatures, allowing preparation of mixtures with reflection band in the visible range. In case of the carboxylic acid dopants, blue phases for optimised compositions were observed. Intermolecular hydrogen bonding between carboxylic acid proton and pyridine nitrogen of chiral dopants was found. Doping the LC host with these dopants led to slight enhancement of HTP value and higher solubility in the LC host.     

Viscoelastic and photoresponsive properties of microparticle/liquid-crystal composite gels: tunable mechanical strength along with rapid-recovery nature and photochemical surface healing using an azobenzene dopant

We investigated viscoelastic and photoresponsive properties of the microparticle/liquid-crystal (LC) composite gels. The mechanical strength of the colloidal gels can be widely tuned by varying particle concentrations. With increasing particle concentration, a storage modulus of the particle/LC composite gels increased and reached over 10(4) Pa, showing good self-supporting ability. We demonstrated for the first time that the particle/LC composite gels exhibited rapid and repetitive recovery of the mechanical strength after large-amplitude oscillatory breakdown. In addition, photoresponsive properties of the composite gels were investigated by the cis-trans photoisomerization of the azobenzene compound doped into the host LCs. The photochemical gel-sol transition could be repeatedly induced by changing the phase structure of the host LCs between nematic and isotropic, using the photoisomerization. The particle/LC composite gels can be applied to optically healable materials by the site-selective gel-sol transition based on the photochemical modulation of the phase structures of the host LCs.     

Polyfluorinated cycloalkoxyphenyl ether systems as dopants for liquid crystal display applications

The effects on response times of representative commercially available dielectrically negative (−LC) and positive (+LC) type liquid crystal mixtures doped with small quantities of various tetrafluorinated cycloalkoxyphenyl ether derivatives were investigated. The synthesis of various polyfluoroaryl systems by nucleophilic aromatic substitution processes is described and electro-optical measurements concerning the rise and decay times and voltage holding ratios of each doped LC formulation are reported. The response time of the dielectrically negative LC host was improved upon doping with each of the tetrafluorinated cycloalkoxyphenyl ether derivatives, although no improvement in the performance of the dielectrically positive LC host was achieved.     

Simultaneous chirality transfer and structured aggregation of a cyclopeptide in a liquid crystal

We report the finding that a chiral cyclopeptide dissolved in a nematic liquid crystal (LC) host could aggregate in a manner that is controlled by the texture (LC director configuration) of a cholesteric phase that is induced by the cyclopeptide itself. On one hand, with the fingerprint texture, where the helical axis formed by rotating LC molecules, that lies in the substrate plane, the cyclopeptide can use the LC texture as a template to aggregate and form long-range-ordered ribbons that mimic the helical configuration of the LC director. On the other hand, with the planar texture, where the helical axis is normal to the substrate plane, the cyclopeptide can migrate into the "oily-streak" defect regions of the cholesteric phase and stabilize a network of defects that dictates the electrooptical response of the LC. This is the first example of a molecular species exhibiting such a structured aggregation and defect stabilization effect in a cholesteric LC, but similar phenomena were previously reported for platinum nanoparticles and silica colloidal particles, respectively, dispersed in a cholesteric LC host. This study provides more evidence for the potential interest of exploring LCs as an anisotropic medium for mediating the aggregation and assembly of cyclopeptides.     

New hydrogen-bonded comblike polyimides with mesogenic side chains for stable orientation and fast switching of liquid crystals

ABSTRACT

New supramolecular comblike polyimides with mesogenic side chains for stable homeotropic orientation and fast electro-optical switching of liquid crystals (LCs) have been prepared through selective intermolecular hydrogen bonding between 4-(4-heptylphenyl)benzoic acid (4HPB) and host polyimide. A low concentration of 4HPB as the mesogenic guest molecule was hydrogen-bonded to polyimide backbone leading to the self-assembled comblike polyimide with enhanced homeotropic orientation properties. The electro-optical characteristics of the LC device containing hydrogen-bonded comblike polyimide exhibited better performance than those of LC cell with conventional polyimide. Because the conventional covalent approach for preparation of polyimides requires considerable synthetic efforts to achieve new functionality in polyimide materials, the proposed noncovalent method is a simple one and highly cost effective. Our controlled methodology should find wide application for the fabrication of functional alignment materials requiring high orientation ability.     

Bulk-mediated in-situ homogeneous photoalignment induced by reactive mesogen containing diphenylacetylene moiety

ABSTRACT

We designed and synthesised a reactive mesogen containing diphenylacetylene moiety in the mesogenic core and two polymerisable acrylate groups at both ends. By irradiating linearly polarised UV light on the conventional host LC mixture containing a small amount of the synthesised reactive mesogen in a sandwiched cell without an alignment layer, we demonstrated an in-situ photo-induced homogeneous alignment of liquid crystals without a pre-treated alignment layer, which was achieved by an irreversible polarisation-selective [2 + 2] photodimerization of diphenylacetylene moiety with linearly polarised UV irradiation at above the isotropic temperature of LC mixture. The resulting homogeneous alignment showed a superior initial dark state, negligible pretilt angle and excellent stabilities. Furthermore, the in-plane switching (IPS) LC cell prepared by this method exhibited a better dark state and electro-optic performance compared to that with conventional-rubbed polyimide alignment layer. The single photoirradiation process automatically resulted in a perfect alignment matching of optical axes between the top and bottom substrates in the LC cell, giving rise to an excellent dark state overcoming an intrinsic misalignment issue and complex fabrication process. The proposed in-situ alignment method is a promising candidate for cost-effective, green-manufacturing, and high-quality alignment technique in the manufacturing of high-resolution liquid crystal displays.     

The influence of nematic liquid crystal content on the electro-optical properties of a polymer dispersed liquid crystal prepared with monodisperse liquid crystal microcapsules

Highly monodisperse poly(methylmethacrylate) (PMMA)/liquid crystal (LC) microcapsules were prepared by the solute codiffusion method (SCM). In SCM, the solvency of the dispersion medium and the swelling temperature were controlled to ensure complete swelling of the LC into the PMMA substrate particles. After the solvent evaporation procedure, mononuclear LC domains were formed in every particle, and overall the LC microcapsules maintained a spherical shape, monodispersity and smooth surface. PDLC cells prepared using the LC microcapsules exhibited an excellent contrast ratio and transmittance. By increasing the LC content in these LC microcapsules, the electro-optical properties of PDLC cells have been greatly improved.     

Main‐chain,thermotropic, liquid‐crystalline,hydrogen‐bonded polymers of 4,4′‐bipyridyl with aliphatic dicarboxylic acids

A series of main‐chain, thermotropic, liquid‐crystalline (LC), hydrogen‐bonded polymers or self‐assembled structures based on 4,4′‐bipyridyl as a hydrogen‐bond acceptor and aliphatic dicarboxylic acids, such as adipic and sebacic acids, as hydrogen‐bond donors were prepared by a slow evaporation technique from a pyridine solution and were characterized for their thermotropic, LC properties with a number of experimental techniques. The homopolymer of 4,4′‐bipyridyl with adipic acid exhibited high‐order and low‐order smectic phases, and that with sebacic acid exhibited only a high‐order smectic phase. Like the homopolymer with adipic acid, the two copolymers of 4,4′‐bipyridyl with adipic and sebacic acids (75/25 and 25/75) also exhibited two types of smectic phases. In contrast, the copolymer of 4,4′‐bipyridyl with adipic and sebacic acids (50/50), like the homopolymer with sebacic acid, exhibited only one high‐order smectic phase. Each of them, including the copolymers, had a broad temperature range of LC phases (36–51 °C). The effect of copolymerization for these hydrogen‐bonded polymers on the thermotropic properties was examined. Generally, copolymerization increased the temperature range of LC phases for these polymers, as expected, with a larger decrease in the crystal‐to‐LC transition than in the LC‐to‐isotropic transition. Additionally, it neither suppressed the formation of smectic phases nor promoted the formation of a nematic phase in these hydrogen‐bonded polymers, as usually observed in many thermotropic LC polymers. The thermal transitions for all of them, measured by differential scanning calorimetry, were well below their decomposition temperatures, as measured by thermogravimetric analysis, which were in the temperature range of 193–210 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1282–1295, 2003     

Influence of rubbing conditions of polyimide alignment layer on optical anisotropy of immobilized liquid crystal film

The relationship between the molecular orientation of a rubbed polyimide film (alignment layer) and that of mesogens in a photopolymerized liquid crystal (LC) coated on the film has been investigated using optical measurements. LC monomers were deposited on the alignment layer and were aligned in one direction. The LC monomers were subsequently photocured. Alignment layers under various rubbing conditions were prepared. It was found that the inclination angle of the refractive index ellipsoid and the optical retardation of photopolymerized LC films are strongly related to the optical anisotropy of the rubbed polyimide film. The photopolymerized LC film exhibited high optical anisotropy when alignment layers with an inclination angle of the refractive index ellipsoid smaller than 6° were used.     

In situ photochemical conversion from cinnamoyl-functionalized liquid-crystalline monomers to liquid-crystalline dimers

Liquid-crystalline (LC) monomers, which were functionalized with a cinnamoyl group on their extremity, were synthesized and irradiated with UV light in their LC phases. In the presence of a triplet sensitizer, most LC monomers were converted into the corresponding dimers, which were produced by the cycloaddition reaction of the cinnamoyl group. The photodimerization reaction could proceed while the LC phases were maintained, because the dimers showed LC phases whose temperature ranges were wider than those of the corresponding monomers. A ¹H NMR study of the LC dimers indicated that the cyclobutane unit dominantly had an anti-head-to-head configuration, that is, δ-truxinate. As the LC monomers, which had a phenyl biphenyl-4-carboxylate moiety as a mesogen, showed smectic A phases and the corresponding dimers also exhibited smectic A phases, we estimated the smectic layer distances by X-ray diffraction analysis and found that the dimers adopted the structure in which the two mesogens aligned laterally and existed in the same smectic layer in the LC phases.     

Fabrication of photoluminescent liquid crystal device using an in situ self-assembled molecular layer of a pyrene derivative

An in situ self-assembled molecular layer of 1-pyrenesulfonic acid sodium salt as an alignment agent was formed on indium tin oxide substrates for vertically aligning liquid crystals (LCs). The thus-aligned LCs exhibited uniform vertical alignment under crossed polarisers. The electro-optical characteristic of the LC cell fabricated using this method exhibited better performance than those of conventional LC cells with a polyimide alignment layer. Because the proposed alignment method is a simple one and involves low concentrations of the alignment agent (0.05 wt%), it is highly cost-effective. Further, the pyrene derivative, when mixed with LCs, exhibited photoluminescence (PL) under ultraviolet light. Given that the proposed method resulted in highly vertically aligned LCs and the alignment agent exhibited PL, the method should find wide use in the fabrication of colour-filter-free LC displays.     

Effects of thiophene-based mesogen terminated with branched alkoxy group on the temperature range and electro-optical performances of liquid crystalline blue phases

A series of symmetrically thiophene-based bent-shaped molecules with branched terminal was synthesised and characterised. Then, their effects as dopants on the blue phase (BP) range of the chiral nematic liquid crystal (N*LC) host were investigated. It was found that the bent-shaped dopants with branched terminal had better miscibility in LC host than the bent-shaped dopants with straight terminal, and contributed to induce BP and enhance the BP temperature range, with the maximum BP temperature range about 20.4°C. Besides, the electro-optical (E-O) performances of the blue phase liquid crystal doped with Th-BC6 (a bent-shaped dopant with the widest induced BP range in N*LC) were also explored. It was found that the drive voltage reduced first and then increased with the doping amount of Th-BC6 increasing. When the doping amount of Th-BC6 was about 15 wt%, the hysteresis could be strikingly reduced.     

Liquid crystal alignment properties of 2-naphthoxymethyl-substituted polystyrenes

The liquid crystal (LC) alignment properties of LC cells fabricated with films of 2-naphthoxymethyl-substituted polystyrenes with different contents of naphthoxymethyl side groups were investigated. The polymer films exhibited good optical transparency in the visible light region (400–700 nm). The LC cells made from the unrubbed films of polymers having more than 57 mol%?of 2-naphthoxymethyl containing monomeric units showed homeotropic LC alignment with a high pretilt angle of about 90^o. Good electro-optical characteristics, such as the threshold voltage, response time, voltage holding ratio and residual DC voltage were observed for the LC cells fabricated with the polymer having 100 mol%?of 2-naphthoxymethyl containing monomeric units as an LC alignment layer.     

Synthesis of new aromatic polyimides with various side chains containing a biphenyl mesogen unit and their abilities to control liquid-crystal alignments on the rubbed surface

New poly(m-phenylene 4,4′-oxydiphthalimide)s containing various side chains, such as 6-(4-biphenylmethoxy)hexyloxy group and 6-(phenylphenoxy)hexyloxy isomers, were synthesized, giving thin films of a high quality. All the polyimides apparently were almost amorphous, but exhibited short-range ordering in some extent, depending on the side chains. By incorporating side chains, the thermal properties, including stability, thermal expansivity, and glass transition temperature, were generally degraded, whereas the optical and dielectric properties were improved. All the polyimides exhibited a good rubbing processability and excellent performance in the controlling of both the alignment and the pretilt of LC molecules in the LC cell. The pretilt angle of LC molecules was easily achieved in a wide-angle range of 8–27°, depending upon the rubbing density as well as the incorporated side chains. The pretilting of LC molecules was very sensitive to all the molecular parameters (namely, the flexibility of polymer chain backbone as well as the isomeric structure of biphenyl mesogen end group, spacer length, and spacer conformation in the side chain) in the polyimide, in addition to the rubbing process. In particular, the side chains, which are much shorter in length than the long alkyl side chains in the polyimides being used widely as LC alignment layers, were evident to involve effectively in the alignment of and the pretilt of LC molecules, which are highly desired in the LC display industry. This might mainly be attributed to a strong interaction between the biphenyl mesogen end group of the side chain and the LC molecule. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2909–2921, 1999     

In situ photochemical conversion from cinnamoyl‐functionalized liquid‐crystalline monomers to liquid‐crystalline dimers

Liquid‐crystalline (LC) monomers, which were functionalized with a cinnamoyl group on their extremity, were synthesized and irradiated with UV light in their LC phases. In the presence of a triplet sensitizer, most LC monomers were converted into the corresponding dimers, which were produced by the cycloaddition reaction of the cinnamoyl group. The photodimerization reaction could proceed while the LC phases were maintained, because the dimers showed LC phases whose temperature ranges were wider than those of the corresponding monomers. A ¹H NMR study of the LC dimers indicated that the cyclobutane unit dominantly had an anti‐head‐to‐head configuration, that is, δ‐truxinate. As the LC monomers, which had a phenyl biphenyl‐4‐carboxylate moiety as a mesogen, showed smectic A phases and the corresponding dimers also exhibited smectic A phases, we estimated the smectic layer distances by X‐ray diffraction analysis and found that the dimers adopted the structure in which the two mesogens aligned laterally and existed in the same smectic layer in the LC phases.     

含液晶基团的聚对亚苯基亚乙炔基类交替共聚物的合成、表征及性能研究

合成了两种含氰基联苯液晶基团的新型聚对亚苯基亚乙炔基(PPE)类交替共聚物,并对其进行了结构表征和性能研究.示差扫描量热仪(DSC)和偏光显微镜(POM)的结果证明了在液晶单元含量较大时聚合物才会出现明显的液晶形态.荧光光谱表明,在降温前后液晶聚合物的发光光谱发生了明显的变化.同时,对聚合物进行能量转移研究发现随着溶液浓度的增加,Frster能量转移更加完全;另外,利用原子力显微镜(AFM)对聚合物降温前后的形态变化进行了观察.结果表明,液晶性质可以导致聚合物形态的变化进而带来发光光谱的改变,为今后制备液晶可控型发光聚合物提供了理论依据.     

Synthesis and characterisation of thermotropic liquid-crystalline properties of azomethine dimers

A series of azomethine dimers were prepared by condensation reactions of benzaldehyde, biphenylcarboxaldehyde and 9-anthraldehyde with various aromatic diamines of varying flexibility in ethanol in the presence of tosic acid. Their chemical structures were determined by Fourier transform infrared and ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopies, as well as elemental analysis. Their thermal properties were also examined by using a number of experimental techniques, including differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarising optical microscopy (POM) and variable temperature X-ray diffraction (VTXRD). Azomethine dimer, prepared from benzaldehyde and 1,9-bis(4-aminophenoxy)nonane, exhibited a monotropic, nematic liquid-crystalline (LC) phase. The majority of the azomethine dimers containing biphenyl moieties exhibited enantiotropic, nematic LC phase on melting at relatively low temperatures, since they developed typical Schlieren, threaded or marbled textures in their LC phase. They also had accessible isotropisation temperatures well below their decomposition temperatures. Azomethine dimers containing anthracene moieties did not exhibit LC properties, but exhibited polymorphism as determined by POM and VTXRD in two cases. All of these azomethine dimers in the series had excellent thermal stability that was in the broad range of temperatures of 307–400°C depending on their degrees of aromaticity index.     

The temperature dependence of nematic liquid crystalline polymer melt diffusion

Polymer chain diffusion in the nematic mesophase was studied using a model main chain liquid crystalline (LC) polyether based on 2,2'-dimethyl-4,4'-dihydroxyazoxybenzene and mixed alkane spacers. A side chain LC polymethacrylate containing an azobenzene mesogenic group was also investigated. Tracer diffusion coefficients were determined as a function of temperature by an ion-beam depth profiling technique, forward recoil spectrometry. The results confirm that main chain LC polymer chain dynamics are dramatically affected by phase transitions and sample geometry. This behaviour is in marked contrast to the side chain LC polymer which exhibited no phase dependence on the part of the tracer diffusion coefficient.     

Chiral nematic liquid crystals with helix inversion from (R)-1,1′-binaphthyl and cholesteryl ester moieties

In this study, on the concept of intramolecular chiral conflict between the (R)-1,1′-binaphthyl and cholesteryl ester moieties, we have designed and synthesised a new liquid crystal (LC) (R)-dicholesteryl 6,6′-[1,1′-binaphthyl-2,2′-diylbis(oxy)]dihexanoate [(R)-DC]. A helix inversion could be observed for the chiral nematic liquid crystal (N*-LC) comprising the commercial nematic LC (N-LC) host SLC1717 and (R)-DC on heating. As a comparison, (S)-dicholesteryl 6,6′-[1,1′-binaphthyl-2,2′-diylbis(oxy)]dihexanoate [(S)-DC] was also prepared. Due to the intramolecular chiral superposition between the (S)-1,1′-binaphthyl and cholesteryl ester moieties, the N*-LC comprising SLC1717 and (S)-DC also exhibited excellent temperature sensitivity.     

Gel formation and photoactive properties of azobenzene-containing polymer in liquid crystal mixture

For the first time, a photochromic azobenzene-containing liquid crystalline (LC) acrylic polymer was used for gelation of low-molar-mass nematic mixture (LMNM). Dissolution of LC polymer in amount of only 2.5 wt.% in LMNM at 120°C (isotropic state) followed by cooling down results in formation of the solid-like photochromic LC gel. Gelation is associated with a phase separation and formation of microsized LC polymer domains, which form a physical “network” containing encapsulated nematic host. Textural changes of mixture during gel formation were analyzed, and absorbance spectra were measured. A special attention was paid to the kinetic study of photoinduced E-Z and Z-E isomerization of azobenzene side groups of polymer in gel. It was shown that ultraviolet (UV)-irradiation and E-Z isomerization processes are accompanied by disruption of H-aggregates of azobenzene moieties and partial dissolution of polymer.