Gold nanoparticles bridging infra-red spectroscopy and laser desorption/ionization mass spectrometry for direct analysis of over-the-counter drug and botanical medicines

With a coating of gold nanoparticles (AuNPs), over-the-counter (OTC) drugs and Chinese herbal medicine granules in KBr pellets could be analyzed by Fourier Transform Infra-red (FT-IR) spectroscopy and Surface-assisted Laser Desorption/Ionization mass spectrometry (SALDI-MS). FT-IR spectroscopy allows fast detection of major active ingredient (e.g., acetaminophen) in OTC drugs in KBr pellets. Upon coating a thin layer of AuNPs on the KBr pellet, minor active ingredients (e.g., noscapine and loratadine) in OTC drugs, which were not revealed by FT-IR, could be detected unambiguously using AuNPs-assisted LDI-MS. Moreover, phytochemical markers of Coptidis Rhizoma (i.e. berberine, palmatine and coptisine) could be quantified in the concentrated Chinese medicine (CCM) granules by the SALDI-MS using standard addition method. The quantitative results matched with those determined by high-performance liquid chromatography with ultraviolet detection. Being strongly absorbing in UV yet transparent to IR, AuNPs successfully bridged FT-IR and SALDI-MS for direct analysis of active ingredients in the same solid sample. FT-IR allowed the fast analysis of major active ingredient in drugs, while SALDI-MS allowed the detection of minor active ingredient in the presence of excipient, and also quantitation of phytochemicals in herbal granules.     

单嘧磺隆原药组成的定性和定量分析

磺酰脲类除草剂作用于乙酰乳酸合成酶(ALS),对温血动物几乎无毒,磺酰脲活性分子必须含有胍桥,在胍桥间位须为双取代,而对位不能有任何取代基,分子中还须有一个杂环系统,前文从室内筛选出发,发现部分单一取代杂环的磺酰脲化合物也具有足够的除草活性,     

Analysis and stability of polymorphs in tablets: The case of Risperidone

Identification of the crystal phase of an active pharmaceutical ingredient (API) in a pharmaceutical tablet is of outmost importance since different polymorphs exhibit different physicochemical properties. Furthermore, some of the crystal phases are protected by patents. Identification of Risperidone polymorph A in film coated commercial tablets was attempted using IR spectroscopy, Raman spectroscopy and X-ray powder diffraction (XRPD). The stability of this polymorph through time and during the manufacturing process was also examined. The inability of IR and Raman techniques to identify the presence of polymorph A in the tablets, despite their lower detection limits for Risperidone, left the XRPD as the only technique that could be used for identifying the presence of Risperidone A against the other crystal phases in the presence of the excipients. Polymorph A was proved to be stable during the manufacturing process and after a storage period of 2 years.     

N-杂环油酰胺、亚油酰胺的合成及抑菌活性测定

采用具有天然活性的植物源成分油酸、亚油酸为先导化合物,经过酰氯化、酰胺化,引入高活性的含氮杂环,合成了7个新化合物,经核磁共振氢谱、红外光谱和元素分析测定,确认了新化合物的结构.初步进行了防治中草药半夏、太子参病害的抑菌活性测试.结果表明,部分化合物对半夏枯萎病、太子参轮纹病有一定的抑菌活性.     

Preparation, Structure and Electrochemical Property of a Pyrazole-substituted Diiron Dithiolate Complex

A pyrazole-substituted diiron dithiolate complex [Fe2(μ-pdt)(CO)5(3,5-Me2Pz)](1,3,5-Me 2Pz=3,5-dimethylpyrazole) was prepared as a biomimetic model for the active site of [FeFe]-hydrogenase by CO-substitution of all-carbonyl complex [Fe2(μ-pdt)(CO)6] with 3,5-Me2Pz. The molecular structure was confirmed by MS, IR, 1H NMR, elemental analysis and single-crystal X-ray analysis. Complex 1 crystallizes in the triclinic system, space group P1 with a=9.108(7), b=9.743(8), c=11.192(9), α=109.235(5), β=101.914(9), γ=96.605(6)o. In CH3CN solution, reversible transformation between 1 and the acetonitrile-substituted species [Fe2(μ-pdt)-(CO)5(NCCH3)] was detected by both IR and cyclic voltammetry (CV). The electrochemical proton reduction catalyzed by 1 in the presence of acetic acid was also studied in CH2Cl2.     

N-[2,4-二取代-5-(3-甲基-2,6-二氧-4-三氟甲基-1,2,3,6-四氢嘧啶-1-基)苯基]酰亚胺类化合物的合成及除草活性

脲嘧啶类化合物具有显著的除草活性. 设计并合成了10个未见文献报道的N-[2,4-二取代-5-(3-甲基-2,6-二氧-4-三氟甲基-1,2,3,6-四氢嘧啶-1-基)苯基]酰亚胺类化合物, 其化学结构经1H NMR, IR, HPLC/MS和元素分析表征. 初步生物活性测定结果表明, 该类化合物具有一定的除草活性, 如9a, 9b, 9c, 9f, 9g和9h在有效成分75 g/hm2剂量下, 茎叶处理对苘麻(Abutilon theophrasti Medic )、刺苋(Amaranthus spinosus)等双子叶杂草的抑制率达90%以上.     

Characterization of biologically active compounds from different herbs: Influence of drying and extraction methods

The hot air (HA) method is the most widely implemented drying method for plants (herbs, vegetables, and fruits). This method has a few drawbacks that include long drying time, limited heat transfer, and limited thermal conductivity. This study investigated the effects of HA and infra-red (IR) heating method on biologically active compounds from different herbs (Khaffir lime, Lemongrass, Prai, Tamarind, and Turmeric). The efficiency of the drying methods was evaluated by considering (a) moisture ratio (MR), (b) specific energy consumption (SEC, MJ/kg.H₂O), (c) moisture diffusivity (D_eff), and (d) activation energy (E_a, kJ/mol). The active compounds were extracted from HA and IR dried herbs using different solvents (hexane, water, and ethanol) through Solid-Liquid Extraction (SLE) and Soxhlet Solvent Extraction (SSE) methods. The moisture removal in the IR drying process increased 10–11% for the herb samples. Specific energy consumption (SEC) increase during the IR drying process is attributed to the rapid evaporation of water at shorter time intervals than HA. Activation energy (E_a) values decreased by 1.66, 1.48, 2.24, 3.13, and 2.07 fold times for IR dried prai, turmeric, lemongrass, tamarind, and kaffir lime, respectively. The higher yields of herbal extracts and the abundance of bioactive terpene derivatives in hexane extracts were obtained from HA herbs compared to IR samples. Therefore, it is concluded that the IR method and SSE process using hexane was suitable to dry and retain the bioactive active compounds within herbs. Further, the IR method over the HA method was considered based on energy consumption, processing time, yield, and active compounds.     

STEM and EDXS characterisation of physico-chemical reactions at the periphery of sol-gel derived Zn-substituted hydroxyapatites during interactions with biological fluids

With its good properties of biocompatibility and bioactivity hydroxyapatite (HA) is highly used as bone substitutes and as coatings on metallic prostheses. In order to improve the bioactive properties of HA, we have elaborated Zn²⁺ doped hydroxyapatite. Zn²⁺ ions substitute for Ca²⁺ cations in the HA structure and four Zn concentrations (Zn/Zn + Ca) were prepared at 0.5, 1, 2 and 5 at.%. To study physico-chemical reactions at the materials periphery, we immersed the bioceramics into biological fluids for intervals from 1 day to 20 days. The surface changes were studied at the nanometer scale by scanning transmission electron microscopy associated with energy dispersive X-ray spectroscopy. After 20 days of immersion, we observed the formation of a calcium–phosphate layer at the periphery of the HA doped with 5% zinc. This layer contains magnesium and its thickness was around 200 nm. Formation of this Ca–P–Mg layer represents the bioactive properties of 5% Zn-substituted hydroxyapatite. This biologically active layer improves the properties of HA and will permit a chemical bond between the ceramic and bone.     

Synthesis, structures and electrochemical properties of nitro- and amino-functionalized diiron azadithiolates as active site models of Fe-only hydrogenases

Complex [[(mu-SCH2)2N(4-NO2C6H4)]Fe2(CO)6] (4) was prepared by the reaction of the dianionic intermediate [(mu-S)2Fe2(CO)6](2-) and N,N-bis(chloromethyl)-4-nitroaniline as a biomimetic model of the active site of Fe-only hydrogenase. The reduction of 4 by Pd-C/H2 under a neutral condition afforded complex [[(mu-SCH2)2N(4-NH2C6H4)]Fe2(CO)6] (5) in 67 % yield. Both complexes were characterized by IR, 1H and 13C NMR spectroscopy and MS spectrometry. The molecular structure of 4, as determined by X-ray analysis, has a butterfly 2Fe2S core and the aryl group on the bridged-N atom slants to the Fe(2) site. Cyclic voltammograms of 4 and 5 were studied to evaluate their redox properties. It was found that complex 4 catalyzed electrochemical proton reduction in the presence of acetic acid. A plausible mechanism of the electrocatalytic proton reduction is discussed.     

Reactivity studies,structural characterization,and thermolysis of cubic titanosiloxanes: precursors to titanosilicate materials which catalyze olefin epoxidation

The cubic titanosiloxane [RSiO(3)Ti(OPr(i))](4) (R = 2,6-Pr(2)(i)C(6)H(3)NSiMe(3)) (1) is found to be relatively inert in its attempted reactions with alcohols and other acidic hydrogen containing compounds. The reaction of 1 with silanol (Bu(t)O)(3)SiOH however proceeds over a period of approximately 3 months to result in the hydrolysis of (Bu(t)O)(3)SiOH and yield the transesterification product [RSiO(3)Ti(OBu(t))](4) (2) rather than the expected [RSiO(3)Ti(OSi(OBu(t))(3))](4). Products 1 and 2 have been characterized by elemental analysis, thermal analysis, and spectroscopic techniques (IR, EI-MS, and NMR). The solid-state structures of both 1 and 2 have been determined by single-crystal X-ray diffraction studies. Compounds 1 and 2 are isomorphous and crystallize in a cubic space group with a central cubic Ti(4)Si(4)O(12) core. Solid state thermolysis of 1 was carried at 450, 600, 800, 900, 1000, and 1200 degrees C in air, and the resulting titanosilicate materials 1a-f were characterized by spectroscopic (IR and DR UV), powder XRD, and electron microscopic methods. While, the presence of Ti-O-Si linkages appears to be dominant in the samples prepared at lower temperatures (450-800 degrees C), phase separation of anatase and rutile forms of TiO(2) occurs at temperatures above 900 degrees C as revealed by IR spectral and PXRD studies. The presence of octahedral titanium centers was observed by DR UV spectroscopy for the samples heated at higher temperatures. The use of new titanosilicate materials as catalysts for olefin epoxidation has been investigated. The titanosilicate materials produced at temperatures below 800 degrees C with a large number of Ti-O-Si linkages (or tetrahedral titanium centers) were found to be more active catalysts compared to the materials produced above 900 degrees C. The observed conversion in the epoxidation reactions was found to be somewhat low although the selectivity of the epoxide formation over the other possible oxidized products was found to be very good.     

Synthesis and antitumour activities of a novel class of dehydroabietylamine derivatives

Structural modification is still a popular and important route in the forest chemical field for finding novel tricyclic diterpenes with more potential bioactivities and broad bioactive spectra. In this study, a series of dehydroabietylamine derivatives containing tricyclic diterpene structures were synthesised through oxidation in the 7th position of ring B and nitrification in the 12th position of ring C using dehydroabietylamine as the starting material. Structures of the synthesised compounds were confirmed by IR, (1)H-NMR, (13)C-NMR, MS and HRMS. The cytotoxicities of these compounds against PC-3 (human prostate carcinoma cell line) and Hey-1B (human ovarian carcinoma cell line) cells by the MTT assay were investigated. The results showed that the presence of a nitro group at 12th position and a carbonyl group at 7th position resulted in an increase of cytotoxic activity. Our findings present more evidence, showing the relationship between the chemical structure and biological function.     

X‐ray microanalysis in STEM of short‐term physicochemical reactions at bioactive glass particle/biological fluid interface. Determination of O/Si atomic ratios

Short‐term physicochemical reactions at the interface between bioactive glass particles and biological fluids are studied and we focus our attention on the measurements of O/Si atomic ratio. The studied bioactive glass is in the SiO₂? Na₂O? CaO? P₂O₅? K₂O? Al₂O₃? MgO system. The elemental analysis is performed at the submicrometre scale by scanning transmission electron microscopy associated with energy‐dispersive x‐ray spectroscopy (EDXS) and electron energy‐loss spectroscopy (EELS). We previously developed an EDXS quantification method based on the ratio method and taking into account local absorption corrections. In this way, we use EELS data to determine, by an iterative process, the local mass thickness, which is an essential parameter for correcting absorption in EDXS spectra. After different immersion times of bioactive glass particles in a simulated biological solution, results show the formation of different surface layers at the bioactive glass periphery. Before 1 day of immersion, we observe the presence of an already shown (Si,O,Al)‐rich layer at the periphery. In this paper, we demonstrate that a thin ‘electron dense’ (Si,O)‐layer is formed on top of the (Si,O,Al)‐layer. In this (Si,O)‐layer, depleted in aluminium, we point out an increase of oxygen weight concentration that can be interpreted by the presence of Si(OH)₄ groups, which permit the formation of a (Ca,P)‐layer. Aluminium plays a role in the glass solubility and may inhibit apatite nucleation. After the beginning of the (Ca,P)‐layer formation, the size of the ‘electron dense’ (Si,O)‐layer decreases and tends to disappear. After 2 days of immersion, the (Ca,P)‐layer grows in thickness and leads to apatite precipitation. Copyright © 2004 John Wiley & Sons, Ltd.     

Bio-Guided Fractionation of Retama raetam (Forssk.) Webb & Berthel Polar Extracts

The fractionation of the methanolic extract (MeOH-E) of Retama raetam (Forssk.) Webb & Berthel and further analysis by thin layer chromatography resulted in four fractions (F1, F2, F3 and F4) that, in parallel with the MeOH-E, were screened for antioxidant, cytotoxic, antidiabetic and antibacterial properties. In addition, chemical characterization of their bioactive molecules was performed using LC-DAD-ESI/MSⁿ. The results indicated that F3 was the most promising regarding antioxidant and cytotoxicity abilities, possibly due to its richness in flavonoids class, particularly isoflavones. In turn, F1 was characterized by the presence of the most polar compounds from MeOH-E (organic acids and piscidic acid) and showed promising abilities to inhibit α-amylase, while F4, which contained prenylated flavonoids and furanoflavonoids, was the most active against the tested bacteria. The gathered results emphasize the distinct biological potentials of purified fractions of Retama raetam.     

二茂铁甲醛与含活性亚甲基化合物的水相反应研究

二茂铁甲醛与具有活性亚甲基的化合物巴比妥酸 ( 2a)、硫代巴比妥酸 ( 2b)、2 ,2 二甲基 1,3 二烷 4,6 二酮 ( 2c)、1 苯基 3 甲基 5 吡唑啉酮 ( 2d)、氰乙酸乙酯 ( 2e)、2 ,4 戊二酮 ( 2f)、环己酮 ( 2g)及环戊酮 ( 2h)在水相中进行缩合反应 ,高产率简便地得到α 二茂铁亚甲基酮 .产物结构经1 HNMR ,1 3 CNMR ,IR及元素分析进行了表征 .     

Protonation, electrochemical properties and molecular structures of halogen-functionalized diiron azadithiolate complexes related to the active site of iron-only hydrogenases

Diiron complexes [{(micro-SCH2)2NCH2C6H4X}{Fe(CO)2L}2] (L = CO, X = 2-Br, 1; 2-F, 2; 3-Br, 3; L = PMe(3), X = 2-Br, 4) were prepared as biomimetic models of the iron-only hydrogenase active site. The N-protonated species [(NH)]+ClO(4)(-), [(NH)](+)ClO(4)(-) and the micro-hydride diiron complex [4(FeHFe)]+PF(6)(-) were obtained in the presence of proton acids and well characterized. The protonation process of 4 was studied by in-situ IR and NMR spectroscopy, which suggests the formation of the diprotonated species [4(NH)(FeHFe)](2+) in the presence of an excess of proton acid. The molecular structures of 1, [(NH)]+ClO(4)(-), 4 and [4(FeHFe)]+PF(6)(-) were determined by X-ray crystallography. The single-crystal X-ray analysis reveals that an intramolecular H...Br contact (2.82 A) in the crystalline state of [1(NH)]+ClO(4)(-). In the presence of 1-6 equiv of the stronger acid HOTf, complex 1 is readily protonated on the bridged-N atom and can electrochemically catalyze the proton reduction at a relatively mild potential (ca.-1.0 V). Complex 4 is also electrocatalytic active at -1.4 V in the presence of HOTf with formation of the micro-hydride diiron species.     

镉配合物的合成、晶体结构与荧光性质

用水热合成法得到了镉的2个配合物[CdCl(pybma)·H₂O]_n (1)和[Cd₂(pybma)₂(OH-BDC)]_n (2)(Hpybma=2-(2-吡啶基)苯并咪唑基乙酸, OH-H₂BDC=5-羟基-1,3-苯二酸),对它们进行了元素分析、红外光谱、XRD,热重,荧光等表征,并用X-射线单晶衍射测定了配合物的单晶结构。配位聚合物1属单斜晶系,P2₁/c空间群, 配位聚合物2属三斜晶系,P1 空间群。2个配合物都是二维层状结构,其中配合物1通过氢键作用形成三维网状结构。实验结果表明2个配合物都具有较好的荧光性质,可以作为潜在的荧光光学材料。     

Spectroscopic Characterization and Properties of Some Bioactive- Peroxovanadium Complexes in Aqueous Solution

1　ＩＮＴＲＯＤＵＣＴＩＯＮＰｅｒｏｘｏｖａｎａｄｉｕｍ ( ｐＶ )ｃｏｍｐｌｅｘｅｓａｒｅ ｐｏｔｅｎｔｐｒｏｔｅｉｎｔｙｒｏｓｉｎｅｐｈｏｓｐｈａｔａｓｅｉｎ ｈｉｂｉｔｏｒｓｗｉｔｈｉｎｓｕｌｉｎ ｍｉｍｅｓｉｓｐｒｏｐｅｒｔｉｅｓａｎｄｃｏｕｌｄｐｏｓｓｉｂｌｙｂｅｄｅｖｅｌｏｐｅｄｉｎｔｏａｎｅｗｋｉｎｄｏｆｏｒａｌｄｒｕｇｆｏｒｔｈｅｔｒｅａｔｍｅｎｔｏｆｄｉａｂｅｔｅｓ[1～ 3].Ｒｅｃｅｎｔｌｙ ,ｔｈｉｓｋｉｎｄｏｆｃｏｍｐｏｕｎｄｈａｓｒｅｃｅｉｖｅｄｃｏｎｓｉｄｅｒａｂｌｅａｔｔｅｎｔ…     

能够促进细胞黏附的生物活性表面的制备

报道了一种能够促进细胞黏附的生物活性表面的制备方法.首先通过表面引发原子转移自由基聚合方法在硅表面接枝了聚(N-甲基丙烯酰氧基琥珀酰亚胺)(PNMASI)聚合物刷.随着反应时间的增加,接枝层厚度基本呈线性增长,表明聚合反应具有一定的可控性.蛋白质吸附测试表明PNMASI改性后的表面具有高密度固定生物分子的能力.同时,通...     

Carbonate formation on bioactive glasses

The system termed 58S is a sol-gel-synthesized bioactive glass composed of SiO2, CaO, and P2O5, used in medicine as bone prosthetic because, when immersed in a physiological fluid, a layer of hydroxycarbonate apatite is formed on its surface. The mechanism of bioactive glass 58S carbonation was studied in the vacuum by means of in-situ FTIR spectroscopy with the use of CO2, H2O, and CD3CN as probe molecules. The study in the vacuum was necessary to identify both the molecules specifically involved in the carbonation process and the type of carbonates formed. Bioactive glass 58S was compared to a Ca-doped silica and to CaO. On CaO, ionic carbonates could form by contact with CO2 alone, whereas on 58S and on Ca-doped silica carbonation occurred only if both CO2 and an excess of H2O were present on the sample. The function of H2O was not only to block surface cationic sites, so that CO2 could not manifest its Lewis base behavior, but also to form a liquid-like (mono)layer that allowed the formation of carbonate ions. The presence of H2O is also supposed to promote Ca2+ migration from the bulk to the surface. Carbonates formed at the surface of CaO and of Ca-bearing silicas (thus including bioactive glasses) are of the same type, but are produced through two different mechanisms. The finding that a water excess is necessary to start heavy carbonation on bioactive glasses seemed to imply that the mechanism leading to in-situ carbonation simulates, in a simplified and easy-to-reproduce system, what happens both in solution, when carbonates are incorporated in the apatite layer, and during sample shelf-aging.     

New Method for Obtaining a Bioactive Essence Extracted from Iberian Ham Fat Rich in MUFA and Antioxidants

Iberian ham is one of the most representative Spanish products and presents an excellent nutritional and sensory quality. Iberian ham trimming fat is considered a by-product and to give a new use to this remaining part could represent a healthy and innovative option for obtaining sustainable foods. The purpose of this work was to obtain a new bioactive ingredient from Iberian ham trimming fat with the highest amount of antioxidants and monounsaturated fatty acids (MUFA), using a new non-invasive solvent-free method. To obtain the essence, two different extraction procedures were carried out. After fatty acid characterization, degree of acidity, peroxide index and a basic sensory analysis were performed. Antioxidant in vitro activity and total phenolic compounds (TPC) were also determined. This new ingredient showed a better sensory profile than raw ham fat, a lower degree of acidity, a higher content of MUFAs, and also showed a higher antioxidant capacity and an increase in phenolic compounds compared to the raw material. This bioactive essence could be used as a food, a cosmetic or a nutraceutical ingredient to prevent certain diseases related to oxidative stress and could also contribute to the maintenance of the circular economy.