Monolith peptide affinity chromatography for quantification of immunoglobulin M

We have developed a method for quantification of a specific monoclonal IgM directed toward embryonic stem cells based on a peptide affinity monolith. A peptide affinity ligand with the sequence C-C-H-Q-R-L-S-Q-R-K was obtained by epitope mapping using peptide SPOT synthesis. The peptide ligand was covalently immobilized by coupling the N-terminal cysteine to a monolithic disk that was previously modified with iodated spacer molecules. The monolithic disc was used for quantification of purified IgM and for IgM present in mammalian cell culture supernatant. We observed 17% unspecific binding of IgM to the monolithic disk and additionally a product loss in the flow through of 20%. Nevertheless, calibration curves had high correlation coefficients and inter/intra-assay variability experiments proved sufficient precision of the method. A limit of quantification of 51.69 μg/mL for purified IgM and 48.40 μg/mL for IgM in cell culture supernatant could be calculated. The binding capacity was consistent within the period of the study which included more than 200 cycles. The analysis time of less than 2 min is an advantage over existing chromatographic methods that rely on pore diffusion.     

Immobilization of monoclonal antibodies for affinity chromatography using a chelating peptide.

A procedure was developed for oriented immobilization of monoclonal antibodies on a solid support. The technique involves the specific oligosaccharide-directed covalent modification of the monoclonal antibody (mAb) with the chelating peptide, Lys-Gly-(His)6, in conjunction with immobilized metal ion affinity chromatography. Chelating peptide-mAb conjugates with a molar ratio of 2.2 retained full antigen binding activity. On immobilization of the modified antibodies on a nickel affinity resin, the molar antigen binding ratio was 1.4. The high antigen binding capacity is indicative of oriented immobilization providing maximum access for the antigen. The described method can be used for the preparation of high-capacity immunosorbents for affinity chromatography and it is applicable for all immunoglobulin classes.     

Development and optimization of a single-step procedure using protein A affinity chromatography to isolate murine IgG1 monoclonal antibodies from hybridoma supernatants.

Protein A affinity chromatography is a standard method of purifying murine monoclonal antibodies (mabs), primarily because it can be performed easily and achieves high-purity levels. Because of its high concentration capacity, it lends itself particularly well to the isolation of mabs from the supernatants of hybridoma cultures. Unfortunately, murine immunoglobulin (Ig) G1 antibodies, a subclass which occurs frequently in the IgG mabs of mice, binds very poorly to protein A, leading to problems in this isolation procedure. For this reason an attempt was made to increase the effectiveness of protein A affinity chromatography in purifying mabs of this IgG subclass by optimizing the binding conditions. The influence of ionic strength, pH and temperature on the binding capacity of a protein A column was studied. The results show the significance of temperature in the binding of the murine IgG1 mab tested to protein A. Further investigations were carried out to optimize the elution conditions and to study the contamination of mab preparations obtained with non-specific bovine protein A reactive Igs originating from culture medium supplement (10% foetal calf serum). An optimized, automatic single-step procedure to obtain highly purified murine IgG1 mabs from hybridoma culture supernatants was developed.     

Chromatographic behavior of IgM:DNA complexes

This study documents the presence of stable complexes between monoclonal IgM and genomic DNA in freshly harvested mammalian cell culture supernatants. 75% of the complex population elutes from size exclusion chromatography with the same retention volume as IgM. DNA comprises 24% of the complex mass, corresponding to an average of 347 base pairs per IgM molecule, distributed among fragments smaller than about 115 base pairs. Electrostatic interactions appear to provide most of the binding energy, with secondary stabilization by hydrogen bonding and metal affinity. DNA-dominant complexes are unretained by bioaffinity chromatography, while IgM-dominant complexes are retained and coelute with IgM. DNA-dominant complexes are repelled from cation exchangers, while IgM-dominant complexes are retained and partially dissociated. Partially dissociated forms elute in order of decreasing DNA content. The same pattern is observed with hydrophobic interaction chromatography. All complex compositions bind to anion exchangers and elute in order of increasing DNA content. A porous particle anion exchanger was unable to dissociate DNA from IgM. Monolithic anion exchangers, offering up to 15-fold higher charge density, achieved nearly complete complex dissociation. The charge-dense monolith surface appears to outcompete IgM for the DNA. Monoliths also exhibit more than double the IgM dynamic binding capacity of the porous particle anion exchanger, apparently due to better surface accessibility and more efficient mass transfer.     

Oriented Covalent Immobilization of Engineered ZZ-Cys onto Maleimide-Sepharose: An Affinity Platform for IgG Purification

Protein A affinity chromatography is an important technique that is widely used in purifying polyclonal and monoclonal antibodies. However, improving the IgG loading capacity of protein A affinity materials remains crucial. In this study, a smaller divalent IgG binding molecule derived from the B domain of protein A, i.e., ZZ-domain, was used to develop an affinity adsorbent with high IgG loading capacity by improving the unit area yield of the site-specific immobilization affinity ligand. The engineered ZZ-Cys was tightly immobilized onto Sepharose support via the covalent incorporation of a cysteine handle and a maleimide group, with oriented manner and divalent IgG binding capacity, thereby resulting in homogenous conjugates, namely, Sepharose–ZZ^SA. Approximately 1.19 mg of ZZ-Cys was coupled onto wet Sepharose g⁻¹ and the maximum saturation binding capacity of Sepharose–ZZ^SA g⁻¹ was approximately 23.80 mg of IgG. The smaller engineered ZZ-Cys can be produced at a lower cost than protein A and covalently conjugated onto matrix surface with high density and full IgG binding capacity. Thus, the proposed platform may be of general use for IgG purification in an efficient and economical manner.

     

Immobilization of binding proteins on nonporous supports

Four different nonporous particulate materials, nylon, polystyrene, soda-lime silicate glass, and fused silica glass, have been evaluated for their appropriateness as immobilization supports for immunoglobulins. A method of protein quantitation that is usually applied to solutions, the bicinchoninic acid (BCA) assay, was used successfully to directly measure ng amounts of protein immobilized on the supports. Two proteins, a monoclonal antibody to theophylline and the biotin binding protein avidin, were studied. Radioactive theophylline and radioactive biotin were used to measure the activity of the immobilized protein. Ligand binding capacity per mm2 of support was measured as a function of amount of protein immobilized. By measuring both the amount of protein immobilized and its ligand binding capacity, we have determined that antitheophylline antibody adsorbed on polystyrene balls loses almost 90% of its binding activity after 65 h, although little protein is lost from the balls over this time. Avidin retains nearly full activity for biotin on polystyrene. The binding activity of biotinyl-antibody conjugate immobilized on avidin-adsorbed polystyrene is stable, even when stored for over 22 wk. Antibody covalently immobilized on soda-lime silicate glass beads retains its binding activity over long-term storage, although only 0.1 mol of 3H-theophylline bind per mol of immobilized antibody. Using fused silica glass particles as the solid support, the same antibody binds approx 0.6 mol of ligand per mol of immobilized antibody protein. The structural "softness" of the immunoglobulin requires that interaction with the surface be prevented in order to maintain activity.     

SPR免疫竞争法研究小分子吗啡与其抗体间作用的动力学特征

表面等离子体共振技术(SPR)主要应用于生物大分子相互作用的研究,本文采用溶液竞争法,测定了小分子吗啡与其抗体作用的结合常数K₁,并计算了吗啡抗体与吗啡化牛血清白蛋白的结合常数K₂.证明了多抗对抗原的亲和力较单抗大,并表明大分子蛋白质的存在对抗体与待测物的结合有阻碍作用.     

Activation of Supports Containing Hydroxyl Groups Using bis(4-Nitrophenyl) carbonate

Abstract

The hydroxyl groups carrying supports, Sepharose Cl-4B and Fractogel HW75F, were facilely activated under anhydrous conditions using bis(4-nitrophenyl) carbonate (BPNPC), a stable and readily available compound. The activation time at room temperature can be as short as 0.5 hour. The activated supports can be stored at 4°C for at least one month without any loss of coupling capacity. Amines can be coupled to the activated support at pH 7 to 10. Coupling of Protein A to BPNPC activated supports yielded immobilized Protein A affinity supports having a high IgG binding capacity. For example, the Protein A-Sepharose and Protein A-Fractogel prepared by using the BPNPC activation method were able to bind, respectively 13 - 14 mg and 8 - 9 mg human IgG with phosphate buffer saline as the loading buffer. In contrast the use of a high yield binding buffer increases the binding capacity of the two affinity supports to 25 - 28 mg and 22 mg respectively.     

Combined use of lectin affinity chromatography and endo-beta-galactosidase to study polylactosamine sequences isolated from haemopoietic cell surfaces

The trypsin-sensitive glycopeptides from cell surfaces of a multipotential murine haemopoietic cell line (DE) have been studied using serial lectin affinity chromatography on columns of immobilized lentil lectin (LCA), concanavalin A (Con A), and wheat-germ agglutinin (WGA). WGA-binding material consisted of glycopeptides that failed to bind to LCA and Con A. Step elution from the WGA-column with 0.01-, 0.1-, 0.5- and 1.0 M N-acetyl-D-glucosamine yielded four affinity classes of glycopeptide (WGA-W, WGA-I, WGA-S and WGA-SS respectively). WGA-W, WGA-I and WGA-S contained both alkali-stable (N-linked) and alkali-labile (O-linked) carbohydrate on high molecular weight glycopeptides. The WGA-SS fraction contained only N-linked carbohydrate. N-linked glycopeptides isolated from each WGA-binding class differed in molecular size, relative N-acetylneuraminic acid content and affinity for Ricinus communis 120 agglutinin. endo-beta-Galactosidase digestion showed that these glycopeptides contained polylactosamine-type glycans. Gel filtration profiles of the enzyme treated materials were different for each WGA-binding population suggesting variation in branching patterns and/or substitution with fucose residues. Affinity chromatography has shown that the WGA binding molecules are the major glycopeptide group at DE cell surfaces.     

Chromatographic behaviour of monoclonal antibodies against wild-type amidase from Pseudomonas aeruginosa on immobilized metal chelates

The aim of this work was to devise a one‐step purification procedure for monoclonal antibodies (MAbs) of IgG class by immobilized metal affinity chromatography (IMAC). Therefore, several stationary phases were prepared containing immobilized metal chelates in order to study the chromatographic behaviour of MAbs against wild‐type amidase from Pseudomonas aeruginosa. Such MAbs adsorbed to Cu(II), Ni(II), Zn(II) and Co(II)–IDA agarose columns. The increase in ligand concentration and the use of longer spacer arms and higher pH values resulted in higher adsorption of MAbs into immobilized metal chelates. The dynamic binding capacity and the maximum binding capacity were 1.33 ± 0.015 and 3.214 ± 0.021 mg IgG/mL of sedimented commercial matrix, respectively. A K_D of 4.53 × 10⁻⁷ m was obtained from batch isotherm measurements. The combination of tailor‐made stationary phases of IMAC and the correct selection of adsorption conditions permitted a one‐step purification procedure to be devised for MAbs of IgG class. Culture supernatants containing MAbs were purified by IMAC on commercial‐Zn(II) and EPI‐30–IDA–Zn(II) Sepharose 6B columns and by affinity chromatography on Protein A‐Sepharose CL‐4B. This MAb preparation revealed on SDS–PAGE two protein bands with M_r of 50 and 22 kDa corresponding to the heavy and light chains, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Specific capture of uranyl protein targets by metal affinity chromatography

To improve general understanding of biochemical mechanisms in the field of uranium toxicology, the identification of protein targets needs to be intensified. Immobilized metal affinity chromatography (IMAC) has been widely developed as a powerful tool for capturing metal binding proteins from biological extracts. However uranyl cations (UO2(2+)) have particular physico-chemical characteristics which prevent them from being immobilized on classical metal chelating supports. We report here on the first development of an immobilized uranyl affinity chromatography method, based on the cation-exchange properties of aminophosphonate groups for uranyl binding. The cation distribution coefficient and loading capacity on the support were determined. Then the stability of the uranyl-bonded phase under our chromatographic conditions was optimized to promote affinity mechanisms. The successful enrichment of uranyl binding proteins from human serum was then proven using proteomic and mass spectral analysis.     

Polystyrene beads as an alternative support material for epitope identification of a prion-antibody interaction using proteolytic excision–mass spectrometry

The binding epitope structure of a protein specifically recognized by an antibody provides key information to prevent and treat diseases with therapeutic antibodies and to develop antibody-based diagnostics. Epitope structures of antigens can be effectively identified by the proteolytic epitope excision–mass spectrometry (MS) method, which involves (1) immobilization of monoclonal or polyclonal antibodies, e.g., on N-hydroxysuccinimide-activated sepharose, (2) affinity binding of the antigen followed by limited proteolytic digestion of the immobilized immune complex, and (3) elution and mass spectrometric analysis of the remaining affinity-bound peptide(s). In the epitope analysis of recombinant cellular bovine prion protein (bPrP^C) to a monoclonal antibody (mAb3E7), we found that epitope excision experiments resulted in extensive nonspecific binding of bPrP to a standard sepharose matrix employed. Here, we show that the use of amino-modified polystyrene beads with aldehyde functionality is an efficient alternative support for antibody immobilization, suitable for epitope excision–MS, with complete suppression of nonspecific bPrP binding.     

Use of nitrocellulose films for affinity-directed mass spectrometry for the analysis of antibody/antigen interactions

Combination of affinity extraction procedures with mass spectrometric analyses is termed affinity-directed mass spectrometry, a technique that has gained broad interest in immunology and is extended here with several improvements from methods used in previous studies. A monoclonal antibody was immobilized on a nitrocellulose (NC) membrane, allowing the corresponding antigen to be selectively captured from a complex solution for analysis by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). This method was also used to rapidly determine the approximate binding region responsible for the antibody/antigen interaction. The tryptic fragments of antigen protein in buffer were applied to the antibody immobilized on NC film and allowed to interact. The NC film was then washed to remove salts and other unbound components, and subjected to analysis by MALDI-TOFMS. Using interferon-alpha(2a) and anti-interferon-alpha(2a) monoclonal antibody IgG as a model system, we successfully extracted the antigen protein and determined the approximate binding region for the antigen/antibody interaction (i.e., the tryptic fragment responsible).     

Chromatographic study of the adsorption kinetics of albumin on monoclonal and polyclonal immunoadsorbents

Summary High-performance liquid chromatography (HPLC) has been used to study the adsorption kinetics of proteins on immunoadsorbents. The adsorption rate constant of human serum albumin (HSA) on monoclonal and polyclonal anti-HSA antibodies immobilized on a silica HPLC support was determined by saturating the column with repeated pulse injections. Studies on polyclonal immunodsorbents of different capacities enable evaluation of the contribution of transport to the binding sites. The adsorption properties of two different monoclonal anti-HSA antibodies immobilized on a chromatographic support were characterized by different approaches. The location of the epitope on the HSA molecule was determined by enzyme-linked immunoassay (ELISA) with albumin fragments. The chromatographic method was used to determine the column capacity and the adsorption rate constant of HSA on the immunoadsorbent. To compare the affinity of the antibodies for the antigen, an indirect ELISA method was used to determine the equilibrium constant of antigen-antibody association in solution Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th september, 1996.     

Screening and chromatographic assessing of a novel IgG biomimetic ligand

A novel biomimetic ligand, N-benzyloxycarbonyl-l-tyrosine (N-cbz-l-Tyr), was screened by a combination method of molecular docking and immobilized receptor technique. Then, N-cbz-l-Tyr was immobilized on Sepharose CL-4B to prepare a specific affinity adsorbent for immunoglobulin G (IgG). Scatchard analysis of the binding isotherm for IgG on the adsorbent gave an association constant (K(a)) of 4.91 x 10(6) m(-1) and a theoretical maximum adsorption capacity of 17.3 mg IgG/mL gel. IgG with a purity of 98% was separated from human plasma by this new affinity adsorbent.     

Surface plasmon resonance spectroscopy study of interfacial binding of thrombin to antithrombin DNA aptamers

We have applied surface plasmon resonance (SPR) spectroscopy, in combination with one-step direct binding, competition, and sandwiched assay schemes, to study thrombin binding to its DNA aptamers, with the aim to further the understanding of their interfacial binding characteristics. Using a 15-mer aptamer that binds thrombin primarily at the fibrinogen-recognition exosite as a model, we have demonstrated that introducing a DNA spacer in the aptamer enhances thrombin-binding capacity and stability, as similarly reported for hydrocarbon linkers. The bindings are aptamer surface coverage and salt concentration dependent. When free aptamers or DNA sequences complementary to the immobilized aptamer are applied after the formation of thrombin/aptamer complexes, bound thrombin is displaced to a certain extent, depending on the stability of the complexes formed under different conditions. When the 29-mer aptamer (specific to thrombin's heparin-binding exosite) is immobilized on the surface, its affinity to thrombin appears to be lower than the immobilized 15-mer aptamer, although the 29-mer aptamer is known to have a higher affinity in the solution phase. These findings underline the importance of aptamers' ability to fold into intermolecular structures and their accessibility for target capture. Using a sandwiched assay scheme followed by an additional signaling step involving biotin-streptavidin chemistry, we have observed the simultaneous binding of the 15- and 29-mer aptamers to thrombin protein at different exosites and have found that one aptamer depletes thrombin's affinity to the other when they bind together. We believe that these findings are invaluable for developing DNA aptamer-based biochips and biosensors.     

Alpha 1-acid glycoprotein affinity columns for the clean-up of adrenergic drugs.

alpha 1-Acid glycoproteins (AAGs) have a structure resembling beta-adrenergic receptors and bind several basic drugs in plasma. Chromatographic columns were prepared by linking epsilon-NH2 groups of AAG lysines to a Sepharose 4B support, in order to purify by affinity chromatography adrenergic drugs of possible use in animal production. Loading capacities, binding efficiency, memory effects and matrix interferences from urine samples were studied. The method developed involves sample application in buffered media (pH 7.4), washing with 5 ml of PBS, and elution with 4 ml of 1% v/v acetic acid. Under these conditions no memory effect was observed. Loading capacity is correlated with the physiological plasma binding rate (PB) of the drug. For clenbuterol (PB 50%) and anilino-like related drugs, 5 mg of AAG were able to bind about 15 x 10(-6) g of drug, with a 100% recovery from the column. Repeatability and reproducibility, expressed as RSD, were 4.2 and 5.4%, respectively. The calculated AAG: drug molar ratio was 4.5:1, indicating 22% of the AAG bound to the column retained drug affinity. Among phenolic-like agonists, salbutamol (PB 5%), fenoterol and isoxsuprine hardly interacted, whereas nylidrin, ritodrine and bamethan showed more effective binding. We also checked binding of other drugs of possible use in veterinary medicine. Application of the AAG column to spiked bovine urine revealed a mean recovery of 97.8%; no matrix interferences were observed.     

Preparation of Functionalized Fe3O4@SiO2 Magnetic Nanoparticles for Monoclonal Antibody Purification

Magnetic Fe₃O₄@SiO₂ nanoparticles with superparamagnetic properties were prepared via a reverse mi-croemulsion method at room temperature. The as-prepared samples were characterized by transmission electron mi-croscopy(TEM), X-ray diffractometry(XRD), and vibrating sample magnetometry(VSM). The Fe₃O₄@SiO₂ nanoparticles were modified by (3-aminopropyl)triethoxysilane(APTES) and subsequently activated by glutaraldehyde(Glu). Protein A was successfully immobilized covalently onto the Glu activated Fe₃O₄@SiO₂ nanoparticles. The adsorption capacity of the nanoparticles was determined on an ultraviolet spectrophotometer(UV) and approximately up to 203 mg/g of protein A could be uniformly immobilized onto the modified Fe₃O₄@SiO₂ magnetic beads. The core-shell of the Fe₃O₄@SiO₂ magnetic beads decorated with protein A showed a good binding capacity for the chime-ric anti-EGFR monoclonal antibody(anti-EGFR mAb). The purity of the anti-EGFR mAb was analyzed by virtue of HPLC. The protein A immobilized affinity beads provided a purity of about 95.4%.     

Formation of high-capacity protein-adsorbing membranes through simple adsorption of poly(acrylic acid)-containing films at low pH

Layer-by-layer polyelectrolyte adsorption is a simple, convenient method for introducing ion-exchange sites in porous membranes. This study demonstrates that adsorption of poly(acrylic acid) (PAA)-containing films at pH 3 rather than pH 5 increases the protein-binding capacity of such polyelectrolyte-modified membranes 3-6-fold. The low adsorption pH generates a high density of -COOH groups that function as either ion-exchange sites or points for covalent immobilization of metal-ion complexes that selectively bind tagged proteins. When functionalized with nitrilotriacetate (NTA)-Ni(2+) complexes, membranes containing PAA/polyethylenimine (PEI)/PAA films bind 93 mg of histidine(6)-tagged (His-tagged) ubiquitin per cm(3) of membrane. Additionally these membranes isolate His-tagged COP9 signalosome complex subunit 8 from cell extracts and show >90% recovery of His-tagged ubiquitin. Although modification with polyelectrolyte films occurs by simply passing polyelectrolyte solutions through the membrane for as little as 5 min, with low-pH deposition the protein binding capacities of such membranes are as high as for membranes modified with polymer brushes and 2-3-fold higher than for commercially available immobilized metal affinity chromatography (IMAC) resins. Moreover, the buffer permeabilities of polyelectrolyte-modified membranes that bind His-tagged protein are ~30% of the corresponding permeabilities of unmodified membranes, so protein capture can occur rapidly with low-pressure drops. Even at a solution linear velocity of 570 cm/h, membranes modified with PAA/PEI/PAA exhibit a lysozyme dynamic binding capacity (capacity at 10% breakthrough) of ~40 mg/cm(3). Preliminary studies suggest that these membranes are stable under depyrogenation conditions (1 M NaOH).     

Preparation of agarose/chitosan composite supermacroporous monolithic cryogels for affinity purification of glycoproteins

Supermacroporous agarose/chitosan composite monolithic (AC CM) cryogels were prepared for affinity purification of the major egg white glycoproteins, ovalbumin (OVA), and ovotransferrin (OVT). The supermacroporous AC CM cryogels were produced by cryocopolymerization of agarose/chitosan blend solutions using glutaraldehyde as the cross-linker. The 3-aminophenlyboronic acid ligand was immobilized by covalent binding to epoxy-group-coupled supermacroporous AC CM cryogels. The microstructure morphologies of these cryogels were analyzed by scanning electron microscopy. The supermacroporous AC CM cryogels contained a continuous interpenetrating polymer network matrix with interconnected pores of 10-100 μm in size. The composite cryogels offered high mechanical stability and had specific recognition for glycoproteins. The maximum binding capacity of OVA adsorption from aqueous solutions was 55.6 mg/g. The matrix could be reused 11 times without significant loss in OVA adsorption capacity. The recovery yields of OVA and OVT from egg white were estimated to be 89 and 93%, respectively.