Synergic Deprotonation Generates Alkali-Metal Salts of Tethered Fluorenide-NHC Ligands Co-Complexed to Alkali-Metal Amides

Synergic combinations of alkali-metal hydrocarbyl/amide reagents were used to synthesise saturated N-heterocyclic carbene (NHC) ligands tethered to a fluorenide anion through deprotonation of a spirocyclic precursor, whereas conventional bases were not successful. The Li₂ derivatives displayed a bridging amide between two Li atoms within the fluorenide-NHC pocket, whereas the Na₂ and K₂ analogues displayed extended solid-state structures with the fluorenide-NHC ligand chelating one alkali metal centre.     

Organoaluminium complexes incorporating an amido phosphine chelate with a pendant amine arm

The palladium-catalyzed aryl amination of 1-bromo-2-fluorobenzene with N,N-dimethylethylenediamine quantitatively produces N-(dimethylaminoethyl)-2-fluoroaniline, which subsequently reacts with KPPh2 in 1,4-dioxane to afford N-(dimethylaminoethyl)-2-diphenylphosphinoaniline (H[PNN]). The reactions of trialkylaluminium with H[PNN] in toluene generate the corresponding aluminium dialkyl complexes [PNN]AlR2 (R = Me, Et, i-Bu). The solution NMR spectroscopic and X-ray crystallographic studies are indicative of a trigonal bipyramidal geometry for these aluminium complexes in which the amino nitrogen atom is trans to the phosphorus donor of the [PNN]- ligand. This study presents rare examples of structurally characterized, five-coordinate aluminium hydrocarbyl complexes supported by phosphine-derived ligands.     

Novel nucleophilic reactivity of disulfido ligands coordinated parallel to M-M (M = Rh, Ir) bonds

Reaction of trans-[(MCp)(2)(mu-CH(2))(2)Cl(2)] (M = Rh, Ir; Cp = eta(5)-C(5)Me(5)) with Li(2)S(2) afforded the disulfido complexes [(MCp)(2)(mu-CH(2))(2)(mu-S(2)-S:S')] which were easily oxidized by O(2) to give the oxygenated complexes [(MCp)(2)(mu-CH(2))(2)(mu-SSO(2)-S:S')]. Although [(RhCp)(2)(mu-CH(2))(2)(mu-S(2)-S:S')] gave a complicated mixture when reacted with CH(2)Cl(2) or CHCl(3), [(IrCp)(2)(mu-CH(2))(2)(mu-S(2)-S:S')] reacted with both CH(2)Cl(2) and CHCl(3) to give the dithioformato complex [(IrCp)(2)(mu-CH(2))(2)(mu-S(2)CH-S:S')]Cl and the cyclotetrasulfido complex [((IrCp)(2)(mu-CH(2))(2))(2)(mu-S(4)-S:S':S":S"')]Cl(2). The oxygenated complexes [(RhCp)(2)(mu-CH(2))(2)(mu-SSO(2)-S:S')] reacted with hydrocarbyl halides to afford bridging hydrocarbyl thiolato complexes accompanied by the generation of SO(2) gas. These complexes have been characterized by NMR spectroscopy, ESI-MS, and X-ray diffraction.     

Intervalence involvement of bridging ligand vibrations in hexaruthenium mixed-valence clusters probed by resonance Raman spectroscopy

Resonance Raman spectroscopy, performed using spectroelectrochemistry and with excitation in the intervalence bands of three pyrazine-bridged, mixed-valence dimers of trinuclear ruthenium clusters, shows resonant enhancement of symmetric bridging ligand modes. The resonant enhancements and frequency shifts of these bridging ligand modes are observed as a function of varying electronic communication between charge sites, and they show that a three-state vibronic model which explicitly includes the participation of the bridging ligand is needed to explain the spectroscopic behavior of these near-delocalized complexes.     

Photoswitching tetranuclear rhenium(I) tricarbonyl diimine complexes with a stilbene-like bridging ligand

Highly efficient photoswitching tetranuclear rhenium(I) tricarbonyl diimine complexes with a stilbene-like bridging ligand are reported. The ability to directly populate excited states localized on the bridging ligand is the key for the observed efficient photoisomerization.     

Methoden zur Synthese von (μ-Kohlenwasserstoff)-Übergangsmetallkomplexen ohne Metall-Metall-Bindung

Übergangsmetallkomplexe mit Kohlenwasserstoffen als σ,σ-, σ,π-oder π,π-gebundene Brükkenliganden sind zur Zeit von großem Interesse. In diesem Aufsatz werden effiziente und gezielte Synthesen für diese Verbindungen, die häufig ästhetische Strukturen aufweisen, vorgestellt. Bei diesen Reaktionen begegnen wir den wichtigsten Reaktionstypen in der modernen metallorganischen Chemie. Sie können eine nützliche Hilfe zur Synthese maßgeschneiderter Verbindungen, z. B. von Modellkomplexen für katalytische Prozesse, sein, insbesondere auch zum gezielten Aufbau von Heterometallverbindungen. Reaktionen von elektrophilen mit nucleophilen Komplexen, zahlreiche Umsetzungen von (funktionalisierten) Kohlenwasserstoffen mit Metallkomplexen, die zur Zeit besonders aktuellen Komplexe mit Acetylid- und Carbidobrücken sowie metallorganische Polymere, von denen man vorteilhafte Materialeigenschaften erwarten kann, werden behandelt. Die Bedeutung dieser Komplexe hat Chisholm^[1] wie folgt formuliert: ?Central to the development of polynuclear and cluster chemistry are bridging ligands and central to organometallic chemistry are metal-carbon bonds. Thus, bridging hydrocarbyl ligands hold a pivotal position in the development of dinuclear and polynuclear organometallic chemistry”?.     

Sequential C-H activation and dinuclear insertion of ethylene promoted by a diiridium complex

Two ethylene molecules, bonded to different metal atoms of a diiridium(I) complex, can be converted into a bridging 3-butenyl-1-yl ligand and a terminal hydride. Such transformation is initiated by an ethylene C-H activation step and followed by an insertion of the second ethylene into a bridging vinyl ligand. This result illustrates the potentiality of diiridium(I) complexes to promote and support reaction sequences of alkene functionalization through C-H activation.     

Acyl iodides in organic synthesis: XI. Unusual N-C bond cleavage in tertiary amines

Acyl iodides reacted with excess primary and secondary amines in a way similar to acyl chlorides, yielding the corresponding carboxylic acid amide and initial amine hydroiodide. Reactions of tertiary amines with acyl iodides were accompanied by cleavage of the N-C bond with formation of the corresponding N,N-di(hydrocarbyl)carboxamide and alkyl iodide. In the presence of excess tertiary amine the latter was converted into quaternary tetra(hydrocarbyl)ammonium iodide.     

Intervalence charge transfer transition in mixed valence complexes synthesised from RuIII(edta)- and FeII(CN)5-cores

Intervalence charge transfer properties were studied for a set of mixed valence complexes incorporating Ru(III) and Fe(II)-centres linked by various saturated and unsaturated bridging ligands (BL). Studies reveal that degree of ground state electronic interaction and coupling between Ru(III) and Fe(II)-centrescanbe attenuated by changing the nature of the bridging ligand. Further, inclusion of the bridging ligand with interrupted π-electron system in a β-CD cavity initiate an optical electron transfer from Fe(II) to Ru(III) which is otherwise not observed.     

Rhodium cluster complexes containing bridging phenylgermanium ligands

The reaction of Rh(4)(CO)(12) with Ph(3)GeH at 97 degrees C has yielded the first rhodium cluster complexes containing bridging germylene and germylyne ligands: Rh(8)(CO)(12)(mu(4)-GePh)(6), 9, and Rh(3)(CO)(5)(GePh(3))(mu-GePh(2))(3)(mu(3)-GePh)(mu-H), 10. When the reaction is performed under hydrogen, the yield of 9 is increased to 42% and no 10 is formed. Compound 9 contains a cluster of eight rhodium atoms arranged in the form of a distorted cube. There are six mu(4)-GePh groups bridging each face of this distorted cube. Four of the rhodium atoms have two terminal carbonyl ligands, while the remaining four rhodium atoms have only one carbonyl ligand. Compound 10 contains a triangular cluster of three rhodium atoms with one terminal GePh(3) ligand, three bridging GePh(2) ligands, and one triply bridging GePh ligand. There is also one hydrido ligand that is believed to bridge one of the Rh-Ge bonds. Compound 9 reacted with PPhMe(2) at 25 degrees C to give the tetraphosphine derivative Rh(8)(CO)(8)(PPhMe(2))(4)(mu(4)-GePh)(6), 11. The structure of 11 is similar to 9 except that a PPhMe(2) ligand has replaced a carbonyl ligand on each the four Rh(CO)(2) groups. Compound 10 reacted with CO at 68 degrees C to give the complex Rh(3)(CO)(6)(mu-GePh(2))(3)(mu(3)-GePh), 12. Compound 12 is formed by the loss of the hydrido ligand and the terminal GePh(3) ligand from 10 and the addition of one carbonyl ligand. All compounds were fully characterized by IR, NMR, elemental, and single-crystal X-ray diffraction analyses.     

Diastereoselective formation and optical activity of an M4L6 cage complex

A chiral bridging ligand affords a single diastereoisomer of tetrahedral M4L6 cage complex in which the optical rotation of each ligand is increased by a factor of 5 on coordination.     

High-nuclearity iridium carbonyl clusters containing phenylgermyl ligands: synthesis, structures, and reactivity

The reaction of Ir4(CO)12 with Ph3GeH at 97 degrees C has yielded the new tetrairidium cluster complexes Ir4(CO)7(GePh3)(mu-GePh2)2[mu3-eta3-GePh(C6H4)](mu-H)2 (10) and Ir4(CO)8(GePh3)2(mu-GePh2)4 (11). The structure of 10 consists of a tetrahedral Ir4 cluster with seven terminal CO groups, two bridging GePh2) ligands, an ortho-metallated bridging mu3-eta3-GePh(C6H4) group, a terminal GePh3 ligand, and two bridging hydrido ligands. Compound 11 consists of a planar butterfly arrangement of four iridium atoms with four bridging GePh2 and two terminal GePh3 ligands. The same reaction at 125 degrees C yielded the two new triiridium clusters Ir3(CO)5(GePh3)(mu-GePh2)3(mu3-GePh)(mu-H) (12) and Ir3(CO)6(GePh3)3(mu-GePh2)3 (13). Compound 12 contains a triangular Ir3 cluster with three bridging GePh2), one triply bridging GePh, and one terminal GePh3 ligand. The compound also contains a hydrido ligand that bridges one of the Ir-Ge bonds. Compound 13 contains a triangular Ir3 cluster with three bridging GePh2 and three terminal GePh3 ligands. At 151 degrees C, an additional complex, Ir4H4(CO)4(mu-GePh2)4(mu4-GePh)2 (14), was isolated. Compound 14 consists of an Ir4 square with four bridging GePh2, two quadruply bridging GePh groups, and four terminal hydrido ligands. Compound 12 reacts with CO at 125 degrees C to give the compound Ir3(CO)6(mu-GePh2)3(mu3-GePh) (15). Compound 15 is formed via the loss of the hydrido ligand and the terminal GePh3 ligand and the addition of one carbonyl ligand to 12. All compounds were fully characterized by IR, NMR, single-crystal X-ray diffraction analysis, and elemental analysis.     

First computational evidence for a catalytic bridging hydroxide ion in a phosphodiesterase active site.

Phosphodiesterases are clinical targets for a variety of biological disorders, because this superfamily of enzymes regulates the intracellular concentration of cyclic nucleotides that serve as the second messengers playing a critical role in a variety of physiological processes. Understanding the structure and mechanism of a phosphodiesterase will provide a solid basis for rational design of the more efficient therapeutics. Although a three-dimensional X-ray crystal structure of the catalytic domain of human phosphodiesterase 4B2B was recently reported, it is uncertain whether a critical bridging ligand in the active site is a water molecule or a hydroxide ion. The identity of this bridging ligand is theoretically determined by performing first-principles quantum chemical calculations on models of the active site. All the results obtained indicate that this critical bridging ligand in the active site of the reported X-ray crystal structure is a hydroxide ion, rather than a water molecule, expected to serve as the nucleophile to initialize the catalytic degradation of the intracellular second messengers.     

Redox-responsive molecular switches based on azoterpyridine-bridged Ru/Os complexes

Three new terpyridine-based dinuclear complexes, [(tpy)Ru(azotpy)Ru(tpy)]4+ (tpy = 2,2':6',2'-terpyridine, azotpy = bis[2,6-bis(2-pyridyl)-4-pyridyl]diazene), [(tpy)Os(azotpy)Os(tpy)]4+, and [(tpy)Ru(azotpy)Os(tpy)]4+ were prepared and their electrochemical and photophysical properties investigated. The bridging ligand, azotpy, in these complexes is reduced at less negative potentials than the unsubstituted tpy ligand. These complexes exhibit absorption bands due to the metal-to-ligand charge-transfer transitions both to the unsubstituted tpy ligand and the bridging azotpy ligand, the latter absorption being observed at the lower energy side of the former. These observations are consistent with the lower lying pi* level of the azotpy ligand than that of the tpy ligand. These complexes are nonluminescent, since the excited electron is trapped in this lower lying pi* level of the azotpy ligand in the excited state. Reduction of this bridging ligand by constant potential electrolysis renders the shape of absorption spectra for these complexes nearly identical to those of the parent complexes, [M(tpy)2]2+ (M = Ru, Os). In this reduced state, the homodinuclear Os complex becomes luminescent at room temperature, whereas the homodinuclear Ru complex becomes luminescent at 77 K, thus establishing their photoswitching behavior. The reduced heterodinuclear complex exhibits luminescence from the Os center, which is sensitized by the Ru center in the same molecule as evidenced by the excitation spectra. Thus, the intramolecular energy transfer can be switched on and off by the redox reaction of the bridging component.     

Formation of dinuclear,macrocyclic, and chain structures from HgI(2) and a semirigid benzimidazole-based bridging ligand: an example of ring-opening supramolecular isomerism

The reactions of HgI(2) with the semirigid ditopic ligand 1,3-bis(benzimidazol-1-ylmethyl)-2,4,6-trimethylbenzene (bbimms) afforded three new complexes, [Hg(2)(mu-I)(2)I(2)(bbimms)] (1), [Hg(2)I(4)(bbimms)(2)] (2), and catena-poly[HgI(2)(bbimms)] (3). The ligand and all complexes have been structurally characterized by single-crystal X-ray diffraction. 1 is a triply bridged dinuclear complex comprised of two Hg(II) ions, one bridging ligand, two bridging I(-) anions, and two terminal I(-) anions. 2 is a dinuclear metallamacrocycle comprised of two Hg(II) ions, two bridging ligands, and four terminal I(-) anions, while 3 is a helical chain with the repeating unit of HgI(2)(bbimms). 2 and 3 can be classified as supramolecular isomers, and both are related to the triply bridged precursor 1 via the addition of one more ligand in a ring-opening process.     

Relative rates for the amination of eta3-allyl and eta3-benzyl complexes of palladium

Reactions of nucleophiles with metal-bound hydrocarbyl pi-ligands bound in an eta3-fashion are key steps in a variety of carbon-carbon and carbon-heteroatom bond-forming reactions. To reveal factors that control the rates of reaction of nucleophiles with this type of ligand, the rates of reactions of an aromatic and an aliphatic amine with a series of eta3-allyl, eta3-benzyl, and eta3-phenethyl palladium complexes ligated by the bisphosphine (R)-BINAP to form allylic and benzylic amines were measured. These data showed that the less common addition to an eta3-benzyl complex is faster than the more common addition to an eta3-allyl complex. The relative rates of reaction followed the trend naphthylmethyl > naphthylethyl > benzyl > 1,1-dimethylallyl > allyl. Computational studies suggest that there is a correlation between the amount of positive charge at the site of nucleophilic attack and the rate of C-N bond formation.     

A closed molecular cube and an open book: two different products from assembly of the same metal salt and bridging ligand

Reaction of the bis-bidentate bridging ligand L1 with Co(ClO4)2 or Zn(BF4)2 affords a mixture of complexes [M8(L1)12]X16 and [M6(L1)9]X12 having the same metal : ligand ratio: the former is a molecular cube with a metal ion at each vertex and a bridging ligand spanning each edge, whereas the latter has a metal framework like that of an 'open book' containing cross-linked double helical metal-ligand subunits.     

Bimetallic reactivity. One-site addition two-metal oxidation reactions using a di-Co(II) complex of a binucleating ligand with 5- and 6-coordinate sites

The preparation of an unsymmetrical binucleating ligand bearing a bridging oxadiazole ring flanked on one side by three ligands and on the other by four ligands is described. When bound to two metals, the ligand forms complexes where the metals are in 5- and 6-coordinate sites after the incorporation of an exogenous bridging ligand. A di-Co(2+) complex of this ligand has been prepared containing a hydroxide bridge. The complex is readily oxidized to the di-Co(3+) state by outer sphere electron transfer with ferrocenium ions. Addition of Br(2) or NO(2)(+) to the di-Co(2+) complex leads to the rapid formation of the di-Co(3+) bromo or nitro complexes, respectively. The ligand characteristics which allow for double oxidation with ferrocenium ions and for the one-site addition two-metal oxidations with Br(2) and NO(2)(+) are discussed in terms of mechanical coupling between the two metal sites.     

Localized Mixed‐Valence and Redox Activity within a Triazole‐Bridged Dinucleating Ligand upon Coordination to Palladium

The new dinucleating redox‐active ligand ( L^H4 ), bearing two redox‐active NNO‐binding pockets linked by a 1,2,3‐triazole unit, is synthetically readily accessible. Coordination to two equivalents of Pd^II resulted in the formation of paramagnetic (S= ) dinuclear Pd complexes with a κ²‐N,N′‐bridging triazole and a single bridging chlorido or azido ligand. A combined spectroscopic, spectroelectrochemical, and computational study confirmed Robin–Day Class II mixed‐valence within the redox‐active ligand, with little influence of the secondary bridging anionic ligand. Intervalence charge transfer was observed between the two ligand binding pockets. Selective one‐electron oxidation allowed for isolation of the corresponding cationic ligand‐based diradical species. SQUID (super‐conducting quantum interference device) measurements of these compounds revealed weak anti‐ferromagnetic spin coupling between the two ligand‐centered radicals and an overall singlet ground state in the solid state, which is supported by DFT calculations. The rigid and conjugated dinucleating redox‐active ligand framework thus allows for efficient electronic communication between the two binding pockets.     

Metallodithiolato ligands as bridges in multiply bonded dimolybdenum complexes

For the first time, a NiN2S2 metallothiolate ligand is used as a bidentate bridging ligand for a multiply bonded dimetal unit.