Hf3 cluster is triply (sigma-, pi-, and delta-) aromatic in the lowest D3h, 1A1' state

The extensive search for the global minimum structure of Hf3 at the B3LYP/LANL2DZ level of theory revealed that D3h 3A2' (1a1'(2)1a2'(2)1e'(4)2a1'(2)1e'2) and D3h 1A1' (1a1'(2)2a1'(2)1e'(4)1a2'(2)3a1'2) are the lowest triplet and singlet states, respectively, with the triplet state being the lowest one. However, at the CASSCF(10,14)/Stuttgart+2f1g level of theory these two states are degenerate, indicating that at the higher level of theory the singlet state could be in fact the global minimum structure. The triplet D3h 3A2' (1a1'21a2'(2)1e'(4)2a1'(2)1e'2) structure is doubly (sigma- and pi-) aromatic and the singlet D3h 1A1' (1a1'(2)2a1'(2)1e'(4)1a2'(2)3a1'2) structure is the first reported triply (sigma-, pi-, and delta-) aromatic system.     

Sequential reaction intermediates in aliphatic C-H bond functionalization initiated by a bis(mu-oxo)dinickel(III) complex

The reaction of [Ni2(OH)2(Me2-tpa)2]2+ (1) (Me2-tpa = bis(6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine) with H2O2 causes oxidation of a methylene group on the Me2-tpa ligand to give an N-dealkylated ligand and oxidation of a methyl group to afford a ligand-based carboxylate and an alkoxide as the final oxidation products. A series of sequential reaction intermediates produced in the oxidation pathways, a bis(mu-oxo)dinickel(III) ([Ni2(O)2(Me2-tpa)2]2+ (2)), a bis(mu-superoxo)dinickel(II) ([Ni2(O2)2(Me2-tpa)2]2+ (3)), a (mu-hydroxo)(mu-alkylperoxo)dinickel(II) ([Ni2(OH)(Me2-tpa)(Me-tpa-CH2OO)]2+ (4)), and a bis(mu-alkylperoxo)dinickel(II) ([Ni2(Me-tpa-CH2OO)2]2+ (5)), was isolated and characterized by various physicochemical measurements including X-ray crystallography, and their oxidation pathways were investigated. Reaction of 1 with H2O2 in methanol at -40 degrees C generates 2, which is extremely reactive with H2O2, producing 3. Complex 2 was isolated only from disproportionation of the superoxo ligands in 3 in the absence of H2O2 at -40 degrees C. Thermal decomposition of 2 under N2 generated an N-dealkylated ligand Me-dpa ((6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine) and a ligand-coupling dimer (Me-tpa-CH2)2. The formation of (Me-tpa-CH2)2 suggests that a ligand-based radical Me-tpa-CH2* is generated as a reaction intermediate, probably produced by H-atom abstraction by the oxo group. An isotope-labeling experiment revealed that intramolecular coupling occurs for the formation of the coupling dimer. The results indicate that the rebound of oxygen to Me-tpa-CH2* is slower than that observed for various high-valence bis(mu-oxo)dimetal complexes. In contrast, the decomposition of 2 and 3 in the presence of O2 gave carboxylate and alkoxide ligands, respectively (Me-tpa-COO- and Me-tpa-CH2O-), instead of (Me-tpa-CH2)2, indicating that the reaction of Me-tpa-CH2* with O2 is faster than the coupling of Me-tpa-CH2* to generate ligand-based peroxyl radical Me-tpa-CH2OO*. Although there is a possibility that the Me-tpa-CH2OO* species could undergo various reactions, one of the possible reactive intermediates, 4, was isolated from the decomposition of 3 under O2 at -20 degrees C. The alkylperoxo ligands in 4 and 5 can be converted to a ligand-based aldehyde by either homolysis or heterolysis of the O-O bond, and disproportionation of the aldehyde gives a carboxylate and an alkoxide via the Cannizzaro reaction.     

Trisilane-1,3-diolato complexes of Ti and Zr: syntheses and X-ray crystal structures

The syntheses and structures of zirconium and titanium complexes containing the novel chelating trisilane-1,3-diolate ligand [Me2Si(R2SiO)2]2- (R = SiMe3) (5)-H2 are reported. The chloride complexes [Me2Si(R2SiO)2]TiCl2 (7a) and [Me2Si(R2SiO)2]ZrCl2 x 2 THF (7b) were prepared by the reaction of MCl4 (M = Ti, Zr) with [Me2Si(R2SiO)2]2Ti (6a) and [Me2Si(R2SiO)2]2Zr (6b), which are derived from the reaction of 5 with M(NEt2)4, respectively. In the presence of TiCl4, complexes 6a and 7a undergo a ring-opening reaction to produce the dinuclear complex [Me2Si(R2SiO)2][TiCl3]2 (9). [Me2Si(R2SiO)2]TiMe2 (10) and [Me2Si(R2SiO)2]TiBnz2 (11) were prepared in moderate yields from reactions of 7a with 2 equiv of MeMgBr and BnzMgCl, respectively. According to NMR spectroscopic investigations, the reaction of the dimethyltitanium complex 10 with B(C6F5)3 led to full exchange of both methyl groups by C6F5 groups under quantitative formation of [Me2Si(R2SiO)2]Ti(C6F5)2 (12) and a mixture of B(C6F5)(3-n)Me(n), where n = 1-3. The structure of 12 is further evidenced by the preparation of an identical sample from the reaction of 7a with 2 equiv of C6F5MgBr. Refluxing an ether solution of 12 surprisingly gave [Me2Si(R2SiO)2]2TiC6F5]2O (13) as a result of ether cleavage. The structures of the complexes 7a, 7b, 9, 10, and 13 were determined by X-ray crystallography, and structural discussion of the bond parameters will be given.     

H_2O_2氧化N_2生成N_2O和H_2O机理的研究

采用量子化学计算方法研究了Ｈ２Ｏ２ 氧化Ｎ２ 生成Ｎ２Ｏ 和Ｈ２Ｏ 的机理．结果发现, Ｈ２Ｏ２ 氧化Ｎ２ 先通过１ 个四元环过渡态形成中间体Ｈ２Ｎ２Ｏ２ 分子,Ｈ２Ｎ２Ｏ２ 再通过一个五元环过渡态形成Ｎ２Ｏ和Ｈ２Ｏ．根据计算得到的每步反应的活化能,得知Ｈ２Ｏ２ 氧化Ｎ２ 生成中间体Ｈ２Ｎ２Ｏ２ 分子是整个反应的控制步骤．     

Reversible intramolecular C-C bond formation/breaking and color switching mediated by a N,C-chelate in (2-ph-py)BMes2 and (5-BMes2-2-ph-py)BMes2

A diboron compound with both 3-coordinate boron and 4-coordinate boron centers, (5-BMes2-2-ph-py)BMes2 (1) and its monoboron analogue, (2-ph-py)BMes2 (2) have been synthesized. Both compounds are luminescent but have a high sensitivity toward light. UV and ambient light cause both compounds to isomerize to 1a and 2a, respectively, via the formation of a C-C bond between a mesityl and the phenyl group, accompanied by a drastic color change from yellow or colorless to dark olive green or dark blue. The structures of 1a and 2a were established by 2D NMR experiments and geometry optimization by DFT calculations. Both 1a and 2a can thermally reverse back to 1 and 2 via the breaking of a C-C bond, with the activation barrier being 107 and 110 kJ/mol, respectively. The N,C-chelate ligands in 1 and 2 were found to play a key role in promoting this unusual and reversible photo-thermal isomerization process on a tetrahedral boron center. Reactions with oxygen molecules convert 1a and 2a to 5-BMes2-2-[(2-Mes)-ph]-pyridine (1b) and 2-(2-Mes)-ph-pyridine (2b), respectively.     

1,4-shifts in a dinuclear Ni(I) biarylyl complex: a mechanistic study of C-H bond activation by monovalent nickel

The known aryne complex (PEt3)2Ni(eta2-C6H2-4,5-F2) (1a) reacts with a catalytic amount of Br2Ni(PEt3)2 over 1% Na/Hg to afford the dinuclear Ni(I) biarylyl complex [(PEt3)2Ni]2(mu-eta1:eta1-3,4-F2C6H2-3',4'-F2C6H2) (2a), which results from a combination of C-C bond formation and C-H bond rearrangement. The dinuclear benzyne [(PEt3)2Ni]2(mu-eta2:eta2-C6H2-4,5-F2) (3) was obtained by the reaction of 1a with a stoichiometric amount of Br2Ni(PEt3)2 over excess 1% Na/Hg, and 3 was found to catalyze the conversion of 1a to 2a. The reaction of 1a with B(C6F5)3 produced the trinuclear complex (PEt3)3Ni3(mu3:eta1:eta1:eta2-4,5-F2C6H2)(mu3:eta1:eta1:eta2-4,5-F2C6H2-4',5'-F2C6H2) (6). The addition of PEt3 to 6 produced 1 equiv of 1a and 1 equiv of [(PEt3)2Ni]2(mu-eta1:eta1-4,5-F2C6H2-4',5'-F2C6H2) (7a). Both 6 and 7a were identified as intermediates in the conversion of 1a to 2a. The analogue [(PEt3)(PMe3)Ni]2(mu-eta1:eta1-4,5-F2C6H2-4',5'-F2C6H2) (7b) was prepared by the addition of PMe3 to 6 and was structurally characterized. NMR spectroscopic evidence identified the additional asymmetric biarylyl [(PEt3)2Ni]2(mu-eta1:eta1-4,5-F2C6H2-3',4'-F2C6H2) (8a) during the conversion of 1a to 2a. The initial observation of 2 equiv of 8a for every equivalent of 2a produced from solutions of 7a suggests that 8a and 2a are formed from a common intermediate. A crossover labeling experiment shows that the C-H bond rearrangement steps in the conversion of 1a to 2a occur with the intermolecular scrambling of hydrogen and deuterium labels. The evidence collected suggests that Ni(I) complexes are capable of activating aromatic C-H bonds.     

Insertion of CO2, CS2, and COS into iron(II)-hydride bonds

The reactions between cis-Fe(dmpe)2H2 (dmpe = Me2PCH2CH2PMe2) (1) or cis-Fe(PP3)H2 (PP3 = P(CH2CH2PMe2)3) (2) and carbon dioxide (CO2), carbon disulfide (CS2), and carbonyl sulfide (COS) are investigated. At 300 K, additions of CO2 (1 atm), CS2 (2 equiv), and COS (1 atm) to 1 result in the formation of a stable transformato hydride, trans-Fe(dmpe)2(OCHO)H (3a), a trans-dithioformato hydride, trans-Fe(dmpe)2(SCHS)H (4a), and a trans-thioformato hydride, trans-Fe(dmpe)2(SCHO)H (5a), respectively. When CS2 and COS are added to cis-Fe(dmpe)2H2 at 195 K, a cis-dithioformato hydride, 4b, and a cis-thioformato hydride, 5b, respectively, are observed as the initially formed products, but there is no evidence of the corresponding cis-formato hydride upon addition of CO2 to cis-Fe(dmpe)2H2. Additions of excess CO2, CS2, and COS to 1 at lower temperatures (195-240 K) result in the formation of a trans-bis(formate), trans-Fe(dmpe)2(OCHO)2 (3b), a trans-bis(dithioformate), trans-Fe(dmpe)2(SCHS)2 (4c), and a cis-bis(thioformate), cis-Fe(dmpe)2(SCHO)2 (5c), respectively. trans-Fe(dmpe)2(SCHO)2 (5d) is prepared by the addition of excess COS at 300 K. Additions of CO2 (1 atm), CS2 (0.75 equiv), and COS (1 atm) to 2 at 300 K result in the formation of a thermally stable, geometrically constrained cis-formato hydride, cis-Fe(PP3)(OCHO)H (6a), a cis-dithioformato hydride, cis-Fe(PP3)(SCHS)H (7a), and a cis-thioformato hydride, cis-Fe(PP3)(SCHO)H (8a), respectively. Additions of excess CO2 and COS to 2 yield a cis-bis(formate), cis-Fe(PP3)(OCHO)2 (6b), and a thermally stable cis-bis(thioformate), cis-Fe(PP3)(SCHO)2 (8b), respectively. All complexes are characterized by multinuclear NMR spectroscopy, with IR spectroscopy and elemental analyses confirming structures of thermally stable complexes where possible. Complexes 3b and 5a are also characterized by X-ray crystallography.     

Experimental and theoretical investigations of the redox behavior of the heterodichalcogenido ligands [(EP(i)Pr2)(TeP(i)Pr2)N](-) (E = S, Se): cyclic cations and acyclic dichalcogenide dimers

The two-electron oxidation of the lithium salts of the heterodichalcogenidoimidodiphosphinate anions [(EP (i)Pr 2)(TeP (i)Pr 2)N] (-) ( 1a, E = S; 1b, E = Se) with iodine yields cyclic cations [(EP (i)Pr 2)(TeP (i)Pr 2)N] (+) as their iodide salts [(SP (i)Pr 2)(TeP (i)Pr 2)N]I ( 2a) and [(SeP (i)Pr 2)(TeP (i)Pr 2)N]I ( 2b). The five-membered rings in 2a and 2b both display an elongated E-Te bond as a consequence of an interaction between tellurium and the iodide anion. One-electron reduction of 2a and 2b with cobaltocene produces the neutral dimers (EP (i)Pr 2NP (i)Pr 2Te-) 2 ( 3a, E = S; 3b, E = Se), which are connected exclusively through a Te-Te bond. Two-electron reduction of 2a and 2b with 2 equiv of cobaltocene regenerates the corresponding dichalcogenidoimidodiphosphinate anions as ion-separated cobaltocenium salts Cp 2Co[(EP (i)Pr 2)(TeP (i)Pr 2)N] ( 4a, E = S; 4b, E = Se). The ditellurido analogue Cp 2Co[(TeP (i)Pr 2) 2N] ( 4c) has been prepared in the same manner for comparison. Density functional theory calculations reveal that the preferential interaction of the iodide anion with tellurium is determined by the polarization of the lowest unoccupied molecular orbital [sigma*(E-Te)] of the cations in 2a and 2b toward tellurium and that the formation of the dimers 3a and 3b with a central Te-Te linkage is energetically more favorable than the structural isomers with either E-Te or E-E bonds. Compounds 2a, 2b, 3a, 3b, 4a, 4b, and 4c have been characterized in solution by multinuclear NMR spectroscopy and in the solid state by X-ray crystallography.     

2-rhodaoxetanes: their formation of oxidation of [RhI(ethene)]+ and their reactivity upon protonation

New cationic, pentacoordinate complexes [(TPA)Rh1(ethene)]+, [1a]+, and [(MeTPA)Rh1(ethene)]+, [1b]+, have been prepared (TPA = N,N,N-tri(2-pyridylmethyl)amine, MeTPA = N-[(6-methyl-2-pyridyl)-methyl]-N,N-di(2-pyridylmethyl)amine). Complex [1a]+ is selectively converted by aqueous HCl to [(TPA)RhIII-(ethyl)Cl]+, [2a]+. The same reaction with [1b]+ results in the [(MeTPA)RhIII-(ethyl)Cl]+ isomers [2b]+ and [2c]+. Treatment of [1a]+ and [1b]+ with aqueous H2O2 results in a selective oxygenation to the unsubstituted 2-rho-da(III)oxetanes (1-oxa-2-rhoda(III)cyclo-butanes) [(TPA)RhIII(kappa2-C,O-2-oxyethyl)]+, [3a]+, and [(MeTPA)RhIII(kappa2-C,O-2-oxyethyl)]+, [3b]+. The reactivity of 2-rhodaoxetanes [3a]+ and [3b]+ is dominated by the nucleophilic character of their 2-oxyethyl oxygen. Reaction of [3a]+ and [3b]+ with the non-coordinating acid HBAr(f)4 results in the dicationic protonated 2-rhodaoxetanes [(TPA)RhIII(kappa2-2-hydroxyethyl)]2+, [4a]2+, and [(MeTPA)RhIII(kappa2-2-hydroxyethyl)]2+, [4b]2+. These eliminate acetaldehyde at room temperature, probably via a coordinatively unsaturated kappa1-2-hydroxyethyl complex. In acetonitrile, complex [4a]2+ is stabilised as [(TPA)-RhIII(kappa1-2-hydroxyethyl)(MeCN)]2+, [5a]2+, whereas the MeTPA analogue [4b]2+ continues to eliminate acetaldehyde. Reaction of [3a]+ with NH4Cl and Mel results in the coordinatively saturated complexes [(TPA)RhIII(kappa1-2-hydroxyethyl)(Cl)]+, [6a]+, and [(TPA)-RhIII(kappa1-2-methoxyethyl)(I)+, [7a]+, respectively. Reaction of [3a]+ with NH4+ in MeCN results in formation of the dicationic metallacyclic amide [(TPA)-RhIII [kappa2-O,C-2-(acetylamino)ethyl]]2+, [9]2+, via the intermediates [4a]2+, [5a]2+ and the metallacyclic iminoester [(TPA)RhIII[kappa2-N,C-2-(acetimidoyloxy)ethyl]]2+, [8]2+. The observed overall conversion of the [Rh(I)(ethene)] complex [1a]+ to the metallacyclic amide [9]2+ via 2-rhodaoxetane [3a]+, provides a new route for the amidation of a [RhI(ethene)] fragment.     

ω-氯氟烷基醇,烯烃及环氧化物的合成

本文报道在引发剂存在下, ω-氯氟烷基碘与烯丙基化合物(CH~2=CH-CH~2X, X=OH,OAC) 及乙烯基化合物CH~2=CH-OAC 发生自由基加成反应, 生成相应的加成产物Cl(CF~2)~nCH~2CHICH~2OH (2a～d), Cl(CF~2)~nCH~2CHICH~2OAC (3a～d)和Cl(CF~2)~nCH~2CHIOAC (4a～d) , 产率较好.2a～d用LiAlH~4脱碘生成Cl(CF~2)~nCH~2CH~2CH~2OH(5a～d), 反应条件温和. 2a～d与KOH-CH~3OH反应， 主要得到醇Cl(CF~2)~nCH=CHCH~2OH (6a～c), 若2a～d与NaOH-水溶液反应则得到环氧丙烷化合物. 在少量HOAC存在下， 异丙醇溶剂中， 锌粉与2a～d和3a～d反应得到消除产物Cl(CF~2)~n-CH~2CH=CH~2 (8a～d) . 4a～d与锌反应，再经KOH-CH~3OH-H~2O水解得到Cl(CF~2)~n(CH~2)~2OH(10a～d).     

Reactivity of the bridged-sulfide complex Pd2Cl2(μ-S)(μ-dmpm)2 toward electrophiles

The dipalladium(I) complex Pd(2)Cl(2)(dmpm)(2) (1a) [dmpm = bis(dimethylphosphino)methane] is known to react with elemental sulfur (S(8)) to give the bridged-sulfide complex Pd(2)Cl(2)(μ-S)(dmpm)(2) (2a) but, in the presence of excess S(8), PdCl(2)[P,S-dmpm(S)] (4a) and dmpm(S)(2) are generated. Treatment of 1a with elemental selenium (Se(8)), however, gives only Pd(2)Cl(2)(μ-Se)(dmpm)(2) (3a). Complex 4a is best made by reaction of trans-PdCl(2)(PhCN)(2) with dmpm(S). Complex 2a reacts with MeI to yield initially Pd(2)I(2)(μ-S)(dmpm)(2) and MeCl, and then Pd(2)I(2)(μ-I)(2)(dmpm)(2) and Me(2)S, whereas alkylation of 2a with MeOTf generates the cationic, bridged-methanethiolato complex [Pd(2)Cl(2)(μ-SMe)(dmpm)(2)]OTf (5). Oxidation of 2a with m-CPBA forms a mixture of Pd(2)Cl(2)(μ-SO)(dmpm)(2) and Pd(2)Cl(2)(μ-SO(2))(dmpm)(2), whereas Pd(2)Br(2)(μ-S)(dmpm)(2) reacts selectively to give Pd(2)Br(2)(μ-SO)(dmpm)(2) (6b). Treatment of the Pd(2)X(2)(μ-S)(dmpm)(2) complexes with X(2) (X = halogen) removes the bridged-sulfide as S(8), with co-production of Pd(II)(dmpm)-halide species. X-ray structures of 3a, 5 and 6b are presented. Reactions of dmpm with S(8) and Se(8) are clarified. Differences in the chemistry of the dmpm systems with that of the corresponding dppm systems [dppm = bis(diphenylphosphino)methane] are discussed.     

Amide-silyl ligand exchanges and equilibria among group 4 amide and silyl complexes

M(NMe2)4 (M = Zr, 1a; Hf, 1b) and the silyl anion (SiButPh2)- (2) in Li(THF)2SiButPh2 (2-Li) were found to undergo a ligand exchange to give [M(NMe2)3(SiButPh2)2]- (M = Zr, 3a; Hf, 3b) and [M(NMe2)5]- (M = Zr, 4a; Hf, 4b) in THF. The reaction is reversible, leading to equilibria: 2 1a (or 1b) + 2 2 <--> 3a (or 3b) + 4a (or 4b). In toluene, the reaction of 1a with 2 yields [(Me2N)3Zr(SiButPh2)2]-[Zr(NMe2)5Li2(THF)4]+ (5) as an ionic pair. The silyl anion 2 selectively attacks the -N(SiMe3)2 ligand in (Me2N)3Zr-N(SiMe3)2 (6a) to give 3a and [N(SiMe3)2]- (7) in reversible reaction: 6a + 2 2 <--> 3a + 7. The following equilibria have also been observed and studied: 2M(NMe2)4 (1a; 1b) + [Si(SiMe3)3]- (8) <--> (Me2N)3M-Si(SiMe3)3 (M = Zr, 9a; Hf, 9b) + [M(NMe2)5]- (M = Zr, 4a; Hf, 4b); 6a (or 6b) + 8 <--> 9a (or 9b) + [N(SiMe3)2]- (7). The current study represents rare, direct observations of reversible amide-silyl exchanges and their equilibria. Crystal structures of 5, (Me2N)3Hf-Si(SiMe3)3 (9b), and [Hf(NMe2)4]2 (dimer of 1b), as well as the preparation of (Me2N)3M-N(SiMe3)2 (6a; 6b) are also reported.     

Role of the phosphine ligands on the stabilization of monoadducts of the model nucleobases 1-methylcytosine and 9-methylguanine in platinum(II) complexes

The addition of 1-methylcytosine (1-MeCy) or 9-methylguanine (9-MeGu) to solutions of cis-(PPh3)2P(ONO2)2 (1a), in a molar ratio of 1:1, affords the monoadducts cis-[(PPh3)2Pt(1-MeCy)(ONO2)]NO3 (2a) and cis-[(PPh3)2Pt(9-MeGu)(ONO2)]NO3 (3a) and only trace amounts of the bisadducts cis-[(PPh3)2Pt(1-MeCy)2](NO3)2 (4a) and cis-[(PPh3)2Pt(9-MeGu)2](NO3)2 (5a), respectively. The X-ray structural determination of 2a and 3a indicates a strong pi-pi stacking interaction between one of the PPh3 phenyl groups and the pyrimydinic N3-platinated cytosine or the imidazole part of the N7-coordinated guanine base. The addition of a further equiv of nucleobase to the monoadducts forms quantitatively the bisadducts that have been isolated as pure compounds 4a and 5a. Under the same experimental conditions, the dinitrato analogue cis-[(PMePh2)2Pt(ONO2)2] (1b) forms the monoadducts 2b and 3b in equilibrium with a relatively high concentration (20-30%) of the bisadducts cis-[(PMePh2)2Pt(1-MeCy)2](NO3)2 (4b) and cis-[(PMePh2)2Pt(9-MeGu)2](NO3)2 (5b), which have been structurally characterized by single-crystal X-ray analysis. The characterization of the isolated complexes by multinuclear NMR spectroscopy is also described.     

Active-site models for iron hydrogenases: reduction chemistry of dinuclear iron complexes

Reduction of Fe2(mu-S2C3H6)(CO)6 (1) in tetrahydrofuran with 1 equiv of decamethylcobaltocene (Cp*2Co) affords a tetranuclear dianion 2. The IR spectra of samples of 2 in solution and in the solid state exhibit a band at 1736 cm(-1), suggestive of the presence of a bridging carbonyl (CO) ligand. X-ray crystallography confirms that the structure of 2 consists of two Fe2 units bridged by a propanedithiolate moiety formulated as [Fe2(mu-S2C3H6)(CO)5(SCH2CH2CH2-mu-S)Fe2(mu-CO)(CO)6](2-). One of the Fe2 units has a bridging CO ligand and six terminal CO ligands. The second subunit exhibits a bridging propanedithiolate moiety. One CO ligand has been replaced by a terminal thiolate ligand, replicating the basic architecture of Fe-only hydrogenases. The reduction reaction can be reversed by treatment of 2 with 2 equiv of [Cp2Fe][PF6], reforming complex 1 in near-quantitative yield. Complex 2 can also be oxidized by acids such as p-toluenesulfonic acid, regenerating complex 1 and forming H2.     

Boron/nitrogen substitution of the central carbon atoms of the biphenalenyl diradical π dimer: a novel 2e-12c bond and large NLO responses

On the basis of the famous staggered biphenalenyl diradical π dimer 1, the eclipsed biphenalenyl (1a), with no centrosymmetry, was obtained by rotating a layer of 1 by 60° around its central axis. Furthermore, the central carbon atoms of 1 and 1a were substituted by boron and nitrogen atoms to form 2 and 2a with a novel 2e-12c bond. We found that the novel 2e-12c bond is formed by the electron pair of the occupied orbital of the phenalenyl monomer substituted by the nitrogen atom and the unoccupied orbital of the phenalenyl monomer substituted by the boron atom. As a result of the novel 2e-12c bond, 2 and 2a exhibit a fascinating interlayer charge-transfer transition character, which results in a significant difference in the dipole moments (Δμ) between the ground state and the crucial excited state. The values of Δμ for 2 and 2a are 6.4315 and 6.9253 Debye, clearly larger than the values of 0 and 0.0015 Debye for 1 and 1a. Significantly, the boron/nitrogen substitution effect can greatly enhance the first hyperpolarizabilities (β(0) ) of 2 and 2a with a novel 2e-12c bond compared with 1 and 1a with a traditional 2e-12c bond: 0 and 19 a.u. for 1 and 1a are much lower than 3516 and 12272 a.u. for 2 and 2a. Furthermore, the interaction energies (E(int) )of 2 and 2a are larger than those of 1 and 1a, which could be considered as a signature of reliability for the newly designed dimers. Our present work will be beneficial for further theoretical and experimental studies on the properties of molecules with the novel 2e-12c bond.     

Cobalt(II) and cobalt(III) complexes of thioether-containing hexadentate pyrazine amide ligands: C-S bond cleavage and cyclometallation reaction

Anaerobic reaction of Co(O2CMe)2.4H2O with the thioether-containing acyclic pyrazine amide hexadentate ligand 1,4-bis[o-(pyrazine-2-carboxamidophenyl)]-1,4-dithiobutane (H2L1) (-CH2CH2- spacer between the two pyrazine amide tridentate coordination units) furnishes [CoII(L1)].MeOH (1a) having CoN2(pyrazine)N'2(amide)S2(thioether) coordination. It exhibits an eight-line EPR spectrum, attesting to a low-spin (S = 1/2) state of CoII. A similar reaction in air, however, furnishes [CoIII(L3a)(L3b)].2MeOH (2a) (S = 0), resulting from a C-S bond cleavage reaction triggered by an acetate ion as a base, having CoN2(pyrazine)N'2(amide)S(thioether)S'(thiolate) coordination. On the other hand, the reaction of Co(O2CMe)2.4H2O with 1,4-bis[o-(pyrazine-2-carboxamidophenyl)]-1,5-dithiopentane (H2) (-CH2CH2CH2- spacer between the two pyrazine amide tridentate coordination units) in air affords a cobalt(II) complex [CoII(L2)].MeOH (1b.MeOH) (S = 1/2); its structurally characterized variety has the composition 1b.C6H6. Interestingly, 1b.MeOH undergoes facile metal-centred oxidation by aerial O2-H2O2-[Fe(eta5-C5H5)2][PF6], which led to the isolation of the corresponding cobalt(iii) complex [CoIII(L2)][ClO4] (2b). When treated with methanolic KOH, 2b affords a low-spin (S = 0) organocobalt(III) complex [Co(III)((L2')] (3). Structures of all complexes, except 1a, have been authenticated by X-ray crystallography. A five-membered chelate-ring forming ligand L1(2-) effects C-S bond cleavage and a six-membered chelate-ring forming ligand L2(2-) gives rise to Co-C bond formation, in cobalt(III)-coordinated thioether functions due to alpha C-H bond activation by the base. A rationale has been provided for the observed difference in the reactivity properties. The spectroscopic properties of the complexes have also been investigated. Cyclic voltammetry experiments in MeCN-CH2Cl2 reveal facile metal-centred reversible-to-quasireversible CoIV-CoIII (or a ligand-centred redox process; 2a), CoIII-CoII (1a, 1b.MeOH, 2a, 2b and 3), CoII-CoI (1a, 1b.MeOH, 2aand 2b), and CoI-Co0 (1a, 1b.MeOH and 2b) redox processes.     

Interaction of diatomic germanium with lithium atoms: electronic structure and stability

Quantum chemical calculations were applied to investigate the electronic structure of mono-, di-, and trilithiated digermanium (Ge2Lin) and their cations (n=0-3). Computations using a multiconfigurational quasidegenerate perturbation approach based on complete active space self-consistent-field wave functions, and density functional theory reveal that Ge2Li has a 2B1 ground state with a doublet-quartet energy gap of 33 kcal/mol. Ge2Li2 has a singlet ground state with a 3Au-1A1 gap of 29 kcal/mol, and Ge2Li3 a doublet ground state with a 4B2-2A2 separation of 22 kcal/mol. The cation Ge2Li+ has a 3B1 ground state, being 13 kcal/mol below the open-shell 1B1 state. The computed electron affinities for diatomic germanium are EA(1)=1.9 eV, EA(2)=-2.5 eV, and EA(3)=-6.0 eV, for Ge2-, Ge2 (2-), and Ge2 (3-), respectively, indicating that only the monoanion is stable with respect to electron detachment, in such a way that Ge2Li is composed by Ge2-Li+ ions. An "atoms-in-molecules" analysis shows the absence of a ring critical point in Ge(2)Li. An electron localization function analysis on Ge2Li supports the view that the Ge-Li bond is predominantly ionic; however, a small covalent character could be anticipated from the analysis of the Laplacian at the Ge-Li bond critical point. The ionic picture of the Ge-Li bond is further supported by a natural-bond-order analysis and the Laplacian of the electron density. The calculated Li affinity value for Ge2 is 2.08 eV, while the Li+ cation affinity value for Ge2- is 5.7 eV. The larger Li+ cation affinity value of Ge2- suggests a Ge2-Li+ interaction and thus supports the ionic nature of Ge-Li bond. In GeLi4 and Ge2Li, the presence of trisynaptic basins indicates a three-center bond connecting the germanium and lithium atoms.     

Which do endohedral Ti2C80 metallofullerenes prefer energetically: Ti2@C80 or Ti2C2@C78? A theoretical study

Four possible isomers of the Ti2C80 metallofullerene are discussed in detail at the B3LYP DFT level of theory: two isomers in Ti2@C80 formula with two Ti atoms encapsulated inside a C80 cage and the other two in Ti2C2@C78 formula with a Ti2C2 cluster involved inside a C78 cage. In the encaged Ti2C2 cluster, there are end-on and side-on C2 bridging modes into the two Ti atoms. The optimized end-on cluster has a linear Ti-C-C-Ti array, whereas the side-on cluster has a butterfly-like structure where the two Ti atoms and the C2 unit do not lie in a plane. DFT calculations show that the Ti2C2@C78 molecule with the end-on Ti2C2 cluster is energetically most favorable in the four isomers. Stabilities of the Ti2C80 molecules are essentially dominated by Ti binding sites inside fullerene cages. The Ti atoms bind over the hexagon rings in preference to a junction between hexagon and pentagon rings. In the Ti2C2@C78 molecules, orbital interactions between the Ti2C2 cluster and the outer cage play a significant role in determining the C2 bridging modes into the dititanium center and their relative stabilities.     

Anionic Roussin's red esters (RREs) syn-/anti-[Fe(mu-SEt)(NO)2]2(-): the critical role of thiolate ligands in regulating the transformation of RREs into dinitrosyl iron complexes and the anionic RREs

The anionic syn-/ anti-[Fe(mu-SEt)(NO) 2] 2 (-) ( 2a) were synthesized and characterized by IR, UV-vis, EPR, and X-ray diffraction. The geometry of the [Fe(mu-S) 2Fe] core is rearranged in going from [{Fe(NO) 2} (9)-{Fe(NO) 2} (9)] Roussin's red ester [Fe(mu-SEt)(NO) 2] 2 ( 1a) (Fe...Fe distance of 2.7080(5) A) to the [{Fe(NO) 2} (9)-{Fe(NO) 2} (10)] complex 2a (Fe...Fe distance of 2.8413(6) A) to minimize the degree of Fe...Fe interaction to stabilize complex 2a. On the basis of X-ray absorption (Fe K- and L-edge), EPR and SQUID, complex 2a is best described as the anionic [{Fe(NO) 2} (9)-{Fe(NO) 2} (10)] Roussin's red ester with the fully delocalized mixed-valence core. The complete bridged-thiolate cleavage yielded DNIC [(EtS) 2Fe(NO) 2] (-) ( 3a) in the reaction of 2 equiv of [EtS] (-) and complex 1a, whereas reaction of 2 equiv of [(t)BuS] (-) with [Fe(micro-S (t)Bu)(NO) 2] 2 (1b) gave DNIC [((t)BuS) 2Fe(NO) 2] (-) (3b) and the anionic Roussin's red ester [Fe(mu-S (t)Bu)(NO) 2] 2 (-) (2b) through bridged-thiolate cleavage in combination with reduction. In contrast to the inertness of DNIC 3b toward complex 1b, nucleophile DNIC 3a induces the reduction of complex 1a to produce the anionic Roussin's red ester 2a. Interestingly, dissolution of complex 3a in MeOH at 298 K finally led to the formation of a mixture of complexes 2a and 3a, in contrast to the dynamic equilibrium of complexes 3b and 1b observed in dissolution of complex 3b in MeOH. These results illustrate the aspect of how the steric structures of nucleophiles ([EtS] (-) vs [ (t)BuS] (-) and [(EtS) 2Fe(NO)2](-) vs [((t)BuS) 2Fe(NO)2] (-)) function to determine the reaction products.     

Formation of iminium ions by fragmentation of a2 ions

Tandem mass spectrometric experiments have been carried out on the protonated amides H-Gly-Ala-NH2, H-Ala-Gly-NH2, H-Ala-Val-NH2, H-Val-Ala-pNA, H-Leu-Phe-NH2, H-Phe-Leu-NH2, H-Phe-Tyr-NH2 and H-Tyr-Phe-NH2 with particular emphasis on the fragmentation of the isomeric a2 ions derived therefrom. Primary fragmentation reactions of the protonated amides involve formation of the y1" and b2 ions with further fragmentation of the b2 ion to form the a2 ion which fragments to form iminium ions. Collision-induced dissociation studies of the mass-selected a2 ions were carried out. For the Gly-Ala, Ala-Gly and Val-Ala a2 ions, weak signals were observed corresponding to loss of CO from the a2 ion. With the exception of the Gly-Ala, Ala-Gly and Val-Ala a2 ions, both possible iminium ions (a1 and the internal iminium ion) are observed with the most abundant being that formed by proton attachment to the imine of higher proton affinity. The results provide strong support for the recently proposed (El Aribi et al. J. Am. Chem. Soc. 2003; 125: 9229) mechanism of fragmentation of a2 ions which involves elimination of CO from the a2 ion to form a proton-bound complex of two imines. Based on this mechanism ab initio calculations of the total energies of the a2 ions and the transition states for fragmentation have been carried out giving the energy barrier for fragmentation of each a2 ion. The experimental results are interpreted in terms of these energetics data, unimolecular rate constants calculated by using the RRKM theory, and the imine proton affinities.