Novel proton-conducting polymer inclusion membranes

The preparation and characterization of new polymer inclusion membranes (PIMs) for proton transport is described. PIMs were prepared with different polymeric cellulose-based compounds and PVC as supports, tris(2-butoxyethyl)phosphate (TBEP) and 2-nitrophenyl octyl ether (NPOE) as plasticizers and dinonylnaphthalenesulfonic acid (DNSA) and dinonylnaphthalenedisulfonic acid (DNDSA) as carriers. The effects of the nature and content of the supports, plasticizers and carriers on membrane proton conductivity was studied using electrochemical impedance spectroscopy (EIS). This technique was also used to evaluate the chemical stability of a CTA–NPOE–DNDSA membrane while its selectivity was monitored with respect to sodium and calcium ions through counter-transport experiments. DSC and TGA techniques were used to determine the thermal stability of these membranes. A PIM based on CTA–DNDSA–NPOE showed the highest proton conductivity (3.5 mS/cm) with no variation of its behavior during 2 months of evaluation. FTIR characterization did not show structural changes of the membrane in this period of time. Thermal analysis indicates that it is stable up to 180 °C. An empirical functional relationship between PIM resistance and composition indicates that increasing plasticizer and carrier concentrations enhances the conductivity of the membranes, while increasing CTA content tends to decrease this property. Transport experiments showed a good selectivity of the CTA–DNDSA–NPOE membrane for protons over calcium or sodium ions.     

Facilitated transport of copper(II) across supported liquid membrane and polymeric plasticized membrane containing 3-phenyl-4-benzoylisoxazol-5-one as carrier

The potential of 3-phenyl-4-benzoylisoxazol-5-one (HPBI) as metal extractant has been evaluated for the first time for Cu(II) transport from aqueous nitrate solutions by supported liquid membrane (SLM) in the solvents chloroform, 2-nitro phenyl octyl ether (NPOE) and dodecyl nitro phenyl ether (DNPE). The efficiency of the membrane transport was optimized as a function of pH, temperature, aqueous phases and membrane composition. It follows the sequence CHCl₃ > DNPE > NPOE. The results suggested that the transport mechanism was mainly controlled by the diffusion of the Cu(PBI)₂ complex in the membrane core. A comparative investigation of Cu(II) transport ions has been made between SLM and polymeric plasticized membrane (PPM), containing HPBI with NPOE and DNPE as organic solvents or plasticizers in order to evaluate the feasibility of PPM with HPBI.     

The Removal of Zn(II) Through Calix[4]Recorcinarene Derivative Based Polymer Inclusion Membrane From Aqueous Solution

In the present work, the transport of Zn(II) metal ion from an aqueous nitrate solution of different metal ions through a polymer inclusion membrane (PIM) containing calix[4]resorcinarene derivative used as a carrier were investigated. Zn(II)metal ion showing high permeability were transported through PIMs prepared from cellulose triacetate (CTA) as a polymeric support material and 2-NPOE as a plasticizer. Total Zn(II) concentration was determined with an Atomic Absorption Spectrometer (AAS) in the acceptor phase. The prepared PIM and supported liquid membrane (SLM) were characterized by using Scanning Electron Microscopy(SEM) and Atomic Force Microscopy (AFM) techniques. The effects of membrane composition, effects of type of plasticizer in the membrane, effects of carrier concentration, and the thickness of the membranes were examined in the facilitated transport experiments of Zn(II) ion through PIM. We compared the performance of SLM experiments under the optimum conditions identified by the PIM studies. Higher permeability coefficient values for Zn(II) was found for SLM, while lower values were ascertained for PIM. The kinetic parameters which have been calculated as the constant rate (k), permeability coefficient (P), flux (J) and diffusion coefficient (D).     

Extraction and preconcentration of manganese(II) from biological fluids (water, milk and blood serum) using supported liquid membrane and membrane probe methods

A supported liquid membrane (SLM) technique was investigated to extract and preconcentrate Mn(II) from water, milk and blood serum. Di-2-ethylhexyl phosphoric acid (DEHPA) with kerosene as diluent was used as a carrier in the membrane to transport Mn(II) from the donor side to acceptor side. The membrane was modified with tri-n-octylphosphine oxide (TOPO) to increase its polarity. Various parameters were investigated to optimise the extraction efficiency: pH of the donor and acceptor phase, dilution factor, donor flow rate. Scanning electron microscope images of the membranes revealed that some matrix compounds were deposited on the surface, thus limiting the extraction process. The optimum conditions found were: pH 3 in the donor phase, 0.2 M nitric acid in the acceptor phase, donor flow rate between 1.0 and 0.3 ml min⁻¹, 15% (w/v) DEPHA and 10% TOPO in kerosene as a carrier in membrane, and dilution factors of 20 times for blood serum and 30 times for milk. The extraction efficiencies were found to be low but constant and highly reproducible showing, strong dependence on sample matrix. The new SLM extraction probe was developed and optimised for Mn(II) extraction. Compared to traditional SLM configurations, this is the simplest configuration. The use of stirring allows the same sample to be extracted many times giving higher extraction efficiency and to minimise the sample size. Adsorptive stripping voltammetry (AdSV) was applied to measure Mn(II) concentration. The optimised method was used to determine the concentration of Mn(II) in water, milk and blood serum samples.     

Quantitative analysis of transport process of cerium(III) ion through polymer inclusion membrane containing N,N,N′,N′-tetraoctyl-3-oxapentanediamide (TODGA) as carrier

The facilitated transport mechanism of cerium(III) ions through polymer inclusion membrane (PIM) consisting of cellulose triacetate (CTA) as a polymer matrix, 2-nitrophenyl n-octyl ether (NPOE) as a solvent and N,N,N′,N′-tetraoctyl-3-oxapentanediamide (TODGA) as a carrier was studied. In order to evaluate the mass transport phenomena in the PIM, a mathematical model was derived from the Fick's first law and the equations for the extraction and the material balance. Methods to determine the values of the transport parameters such as the diffusion coefficient are described, and the dependency of the flux on the experimental condition was calculated. The model is very useful as a design tool to analyze and optimize the concentration process of low level radioactive wastewater using the PIM.     

Polymer inclusion membranes: The concept of fixed sites membrane revised

The mechanism of facilitated transport of metal ions across polymer inclusion membranes (PIMs) is revised on the basis of transport flux measurements and of new data brought by techniques sensitive to local inter-molecular interactions and molecular diffusion. Cellulose triacetate (CTA) membranes built with two types of inclusion carriers: a liquid one Aliquat 336 and a crystalline one Lasalocid A, both able to carry metal ions across PIMs and supported liquid membranes (SLMs) made of the same components, have been compared. Both PIM systems show similar effects for what concern the need of a carrier threshold concentration for the occurrence of a transport flux across PIM as revealed by flux and fluorescence correlation spectroscopy (FCS) measurements, and the dependence of the chemical nature of plasticizers on the metal ion flux. These systems also present similar Raman and far IR signatures of structural evolution of PIMs with the increase of the carrier concentration within the CTA matrix.

All the presented data are interpreted as concern PIMs, according to an evolution of chemical interactions between components of the polymeric membrane able to lead to a phase transition. This phase transition type of the carrier-plasticized polymer system is induced by the increase of carrier concentration in the polymer chains. The PIM progressively organizes itself like a liquid SLM because of the enhancement of preferential solvent interactions between the carrier and the plasticizer.

The main conclusion of this study is that the classically adopted “hopping” transport mechanism between fixed carrier sites in a PIM does not apply to such carrier chemically unbound to polymer membrane systems.     

Separation and Removal of Metal Ionic Species by Polymer Inclusion Membranes

Competitive alkali metal cation transport across polymer inclusion membranes (PIMs) containing sym-(alkyl)dibenzo-16-crown-5-oxyacetic acid carriers provides excellent selectivity for Na⁺ transport with the total fluxes being strongly influenced by the length of the alkyl chain that is attached geminal to the functional side arm in the lariat ether. Removal of chromium(VI) anions by PIMs from acidic aqueous phases was also investigated. Using tri-n-octylamine (TOA) as the ion carrier, Cr(VI) was removed by a PIM to decrease the source phase metal concentration from 1.0 to 0.010 ppm after 30 hours of transport. Competitive transport of Cr(VI) and Cr(III) ions from acidic source phases through PIMs and supported liquid membranes (SLMs) containing TOA and tri-n-octylphosphine oxide (TOPO) as carriers was evaluated and a very high Cr(VI)/Cr(III) separation ratio of 4800 was achieved with a PIM containing TOA. Competitive transport of Zn(II), Cd(II), and Cr(VI) from acidic aqueous solutions through PIMs containing TOA was investigated. The selectivity order for metal ion transport was: HCrO₄ ^–>CdCl₄ ^2–+CdCl₃ ^–>ZnCl₄ ^2–+ ZnCl₃ ^–. Non-contact atomic force microscopy was used to obtain images of the pores in cellulose triacetate membranes containing a plasticizer.     

Development and application of carbon nanotubes assisted electromembrane extraction (CNTs/EME) for the determination of buprenorphine as a model of basic drugs from urine samples

In this work carbon nanotubes assisted electromembrane extraction (CNTs/EME) coupled with capillary electrophoresis (CE) and ultraviolet (UV) detection was developed for the determination of buprenorphine as a model of basic drugs from urine samples. Carbon nanotubes reinforced hollow fiber was used in this research. Here the CNTs serve as a sorbent and provide an additional pathway for solute transport. The presence of CNTs in the hollow fiber wall increased the effective surface area and the overall partition coefficient on the membrane; and lead to an enhancement in the analyte transport. For investigating the influence of the presence of CNTs in the SLM on the extraction efficiency, a comparative study was carried out between EME and CNTs/EME methods. Optimization of the variables affecting these methods was carried out in order to achieve the best extraction efficiency. Optimal extractions were accomplished with NPOE as the SLM, with 200 V as the driving force, and with pH 2.0 in the donor and pH 1.0 in the acceptor solutions with the whole assembly agitated at 750 rpm after 25 min and 15 min for EME and CNTs/EME, respectively.     

Cd(II) and Pb(II) extraction and transport modeling in SLM and PIM systems using Kelex 100 as carrier

The extraction and transport of Cd(II) and Pb(II) in two different membrane systems (SLM and PIM) using Kelex 100 as carrier was studied, proposing the corresponding chemical models of transport. A two-species transport model is proposed for Cd(II), according to solvent extraction (SX) data. Experimental SLM permeabilities are 9.7×10⁻⁵ m s⁻¹, while measured PIM permeabilities are 5×10⁻⁵ m s⁻¹. Values for the aqueous boundary layer thickness and for the diffusion coefficient of the metal cation-carrier complexes in the membrane phase were calculated from numerical fitting of experimental data using the proposed transport models. A highly selective Pb(II) separation was achieved in PIM systems based on the nature of the chemical equilibria involved in Cd(II) and Pb(II) membrane transport.     

Multiresidue determination of sulfonamides in a variety of biological matrices by supported liquid membrane with high pressure liquid chromatography-electrospray mass spectrometry detection

A high performance liquid chromatography (HPLC) coupled to a mass spectrometer (MS) was used for a simultaneous determination of 16 sulfonamide compounds spiked in water, urine, milk, and bovine liver and kidney tissues. Supported liquid membrane (SLM) made up of 5% tri-n-octylphosphine oxide (TOPO) dissolved in hexyl amine was used as a sample clean-up and/or enrichment technique. The sulfonamides mixture was made up of 5-sulfaminouracil, sulfaguanidine, sulfamethoxazole, sulfamerazine, sulfamethizole, sulfamethazine (sulfadimidine), sulfacetamide, sulfapyridine, sulfabenzamide, sulfamethoxypyridazine, sulfamonomethoxine, sulfadimethoxine sulfasalazine, sulfaquinoxaline, sulfadiazine, and sulfathiazole. Some of these compounds, such as, sulfaquinoxaline, sulfadiazine, sulfabenzamide, sulfathiazole and sulfapyridine failed to be trapped efficiently by the same liquid membrane (5% TOPO in hexylamine). The detection limits (DL) obtained were 1.8 ppb for sulfaguanidine and sulfamerazine and between 3.3 and 10 ppb in bovine liver and kidney tissues for the other sulfonamides that were successfully enriched with SLM; 2.1 ppb for sulfaguanidine and sulfamerazine and between 7.5 and 15 ppb in cow’s urine, whereas the DL values in milk were 12.4 ppb for sulfaguanidine and sulfamerazine and between 16.8 and 24.3 for the other compounds that were successfully enriched by the membrane. Several factors affecting the extraction efficiency during SLM enrichment, such as donor pH, acceptor pH, enrichment time and the membrane solvent were studied.     

Studies on ion transport of some rare earth elements through solvating extractants immobilised on supported liquid membrane

The studies on ion transport of terbium and dysprosium through a porous supported liquid membrane (SLM) containing TOPO (trioctyl phosphine oxide) and TBP (tributyl phosphate) as immobilised carriers have been carried out. The effect of stirring of bulk solutions on permeability coefficient has been investigated. The permeability coefficient increases with increase in pH of source phase from 0–6, and hydrogen ion concentration from 0.01 to 0.1 M of receiving solution. The dependency of permeability coefficient on the carrier concentration has been explored. The effect of ammonium thiocyanate concentration on permeability coefficient has been studied. In order to develop a method for enrichment of rare earth elements, further investigations were carried out by using a hollow fibre membrane extractor. The mechanism of ion transport of terbium and dysprosium in SLM systems has been explained.     

Electromembrane extraction combined with gas chromatography for quantification of tricyclic antidepressants in human body fluids

Recent advances in electromembrane extraction (EME) methodology calls for effective and accessible detection methods. Using imipramine and clomipramine as model therapeutics, this proof-of-principle work combines EME with gas chromatography analysis employing a flame ionization detector (FID). The drugs were extracted from acidic aqueous sample solutions, through a supported liquid membrane (SLM) consisting of 2-nitrophenyl octyl ether (NPOE) impregnated on the walls of the hollow fiber. EME parameters, such as SLM composition, type of ion carrier, pH and the composition of donor and acceptor solutions, agitation speed, extraction voltage, and extraction time were studied in detail. Under optimized conditions, the therapeutics were effectively extracted from different matrices with recoveries ranging from 90 to 95%. The samples were preconcentrated 270–280 times prior to GC analysis. Reliable linearity was also achieved for calibration curves with a regression coefficient of at least 0.995. Detection limits and intra-day precision (n = 3) were less than 0.7 ng mL⁻¹ and 8.5%, respectively. Finally, method was applied to determination and quantification of drugs in human plasma and urine samples and satisfactory results were achieved.     

Star-shaped Keggin-type heteropolytungstate nanostructure as a new catalyst for the preparation of quinoxaline derivatives

In this work, we report the novel successful preparation of the Keggin-type Cs(CTA)₂PW₁₂O₄₀ (CTA = cetyltrimethylammonium cation) nanostructure by a microemulsion method. The microemulsion system included the cationic surfactant CTAB, 1-butanol as co-surfactant, isooctane as oil phase, and an aqueous solution containing CsNO₃. The Cs(CTA)₂PW₁₂O₄₀ nanostructure was formed by the addition of an aqueous solution of phosphotungstic acid to the microemulsion solution. Characterization of the resultant nanostructure was done using FT–IR spectroscopy, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis, and CHN elemental analysis. The product was found to be a star-shaped nanostructure composed of some nanorods whose diameter and length are about 100 nm and 500 nm, respectively. The prepared nanostructure was used as a recoverable catalyst for the synthesis of quinoxaline derivatives by the condensation of 1,2-diamines with 1,2-dicarbonyl compounds, which afforded the products in good to high yields in short reaction times.     

Comparative study of sample preparation methods; supported liquid membrane and solid phase extraction in the determination of benzimidazole anthelmintics in biological matrices by liquid chromatography-electrospray-mass spectrometry

Supported liquid membrane (SLM) and solid phase extraction (SPE) have been applied as clean-up and/or enrichment techniques for a mixture of five benzimidazole anthelmintics compounds, namely albendazole, fenbendazole, mebendazole, oxibendazole, and thiabendazole. Two biological matrices, mainly urine and milk, and ultra high purity (UHP) water were spiked with a mixture of these five compounds. Waters Oasis^® MCX and International Sorbent Technology (IST) HCX SPE sorbents were used. The liquid membrane used for clean-up and/or enrichment of these compounds was 5% tri-n-octylphosphine oxide (TOPO) dissolved in n-undecane/di-n-hexyl ether (1:1). The SLM extraction efficiencies and SPE percentage recoveries ranged between 60 and 100%. The detection limits (DLs) for different benzimidazole compounds by SPE/LC-ES-MS for thiabendazole, oxibendazole, and albendazole was 0.1 ng/L, for fenbendazole and mebendazole was 1 and 10 ng/L, respectively. Similarly, the detection limits of SLM/LC-ES-MS for thiabendazole, oxibendazole, and albendazole was 0.1 ng/L and for fenbendazole and mebendazole was 1 ng/L. The results of optimization of various parameters of the SLM method are reported.     

Drop-to-drop microextraction across a supported liquid membrane by an electrical field under stagnant conditions

Electromembrane extraction (EME) of basic drugs from 10 μL sample volumes was performed through an organic solvent (2-nitrophenyl octyl ether) immobilized as a supported liquid membrane (SLM) in the pores of a flat polypropylene membrane (25 μm thickness), and into 10 μL 10 mM HCl as the acceptor solution. The driving force for the extractions was 3–20 V d.c. potential sustained over the SLM. The influence of the membrane thickness, extraction time, and voltage was investigated, and a theory for the extraction kinetics is proposed. Pethidine, nortriptyline, methadone, haloperidol, and loperamide were extracted from pure water samples with recoveries ranging between 33% and 47% after only 5 min of operation under totally stagnant conditions. The extraction system was compatible with human urine and plasma samples and provided very efficient sample pretreatment, as acidic, neutral, and polar substances with no distribution into the organic SLM were not extracted across the membrane. Evaluation was performed for human urine, providing linearity in the range 1–20 μg/mL, and repeatability (RSD) in average within 12%.     

Nano-electromembrane extraction

The present work has for the first time described nano-electromembrane extraction (nano-EME). In nano-EME, five basic drugs substances were extracted as model analytes from 200 μL acidified sample solution, through a supported liquid membrane (SLM) of 2-nitrophenyl octyl ether (NPOE), and into approximately 8 nL phosphate buffer (pH 2.7) as acceptor phase. The driving force for the extraction was an electrical potential sustained over the SLM. The acceptor phase was located inside a fused silica capillary, and this capillary was also used for the final analysis of the acceptor phase by capillary electrophoresis (CE). In that way the sample preparation performed by nano-EME was coupled directly with a CE separation. Separation performance of 42,000–193,000 theoretical plates could easily be obtained by this direct sample preparation and injection technique that both provided enrichment as well as extraction selectivity. Compared with conventional EME, the acceptor phase volume in nano-EME was down-scaled by a factor of more than 1000. This resulted in a very high enrichment capacity. With loperamide as an example, an enrichment factor exceeding 500 was obtained in only 5 min of extraction. This corresponded to 100-times enrichment per minute of nano-EME. Nano-EME was found to be a very soft extraction technique, and about 99.2–99.9% of the analytes remained in the sample volume of 200 μL. The SLM could be reused for more than 200 nano-EME extractions, and memory effects in the membrane were avoided by effective electro-assisted cleaning, where the electrical potential was actively used to clean the membrane.     

The use of a polymer inclusion membrane in flow injection analysis for the on-line separation and determination of zinc

This paper reports the first use of a polymer inclusion membrane (PIM) for on-line separation in flow injection analysis (FIA) involving simultaneous extraction and back-extraction. The FIA system containing the PIM separation module was used for the determination of Zn(II) in aqueous samples in the presence of Mg(II), Ca(II), Cd(II), Co(II), Ni(II), Cu(II), and Fe(III). The Fe(III) and Cu(II) interferences were eliminated by off-line precipitation with phosphate and on-line complexation with chloride, respectively. The concentration of Zn(II) was determined spectrophotometrically using 4-(2-pyridylazo) resorcinol (PAR). The optimal composition of the PIM consisted of 40% (m/m) di(2-ethlyhexyl) phosphoric acid (D2EHPA) as carrier, 10% (m/m) dioctyl phthalate (DOP) as plasticizer and 50% (m/m) poly(vinyl chloride) (PVC) as the base polymer. The optimized FIA system was characterized by a linear calibration curve in the range from 1.0 to 30.0 mg L⁻¹ Zn(II), a detection limit of 0.05 mg L⁻¹ and a relative standard deviation of 3.4% with a sampling rate of 4 h⁻¹. Reproducible results were obtained for 20 replicate injections over a 5 h period which demonstrated a good membrane stability. The FIA system was applied to the determination of Zn(II) in pharmaceuticals and samples from the galvanizing industry and very good agreement with atomic absorption spectrometry was obtained.     

Comparison of carrier-facilitated copper(II) ion transport mechanisms in a supported liquid membrane and in a plasticized cellulose triacetate membrane

Transport of copper ions through a plasticized cellulose triacetate membrane containing lauric acid as carrier and tris(2-ethylhexyl)phosphate (TEHP) as plasticizer has been investigated. A comparative study of transport mechanism across such a membrane and a supported liquid membrane (SLM) containing the same carrier in THEP has been made. In both cases, transport mechanisms were controlled by the diffusion of 1:2 metal/carrier complex in the membrane and of copper ions through the aqueous diffusion layer at the source/membrane interface. Diffusion coefficient in the cellulose triacetate membrane, after normalization, was found to be 22 times lower than in the corresponding SLM.     

Carrier-mediated extraction of bipyridilium herbicides across the hydrophobic liquid membrane

Supported liquid membrane (SLM) method for preconcentration and enrichment of the two bipyridilium herbicides, namely diquat and paraquat, from environmental water samples has been developed. The permanently charged cationic herbicides were extracted from a flowing aqueous solution to a stagnant acidic acceptor solution across a liquid membrane containing 40% (v/v) di-(2-ethylhexyl) phosphoric acid dissolved in di-n-hexyl ether. The mass transfer of analytes is driven by the counter-coupled transport of hydrogen ions from the acceptor to the donor phase. The efficiency of the extraction process depends on the donor solution pH, the amount of the mobile carrier added to the liquid membrane and the concentration of the counter ion in the acceptor solution. The applicability of the method for extraction of these quaternary ammonium herbicides from environmental waters was also investigated by spiking analyte sample solutions in river water. With 24 h sample enrichment concentrations of diquat and paraquat down to ca. 10 ng/L could be detected in environmental waters.     

Carrier-mediated transport of rare earth elements through liquid membranes. Transport of Sc,Y, Ce,Eu, Gd,Tm, Yb through supported liquid membrane containing TOPO in n-dodecane

Transport of trivalent rare earth elements-REE (Sc, Y, Ce, Eu, Gd, Tm, Yb) from nitrate medium through SLM containing TOPO in n-dodecane, supported on a nucleoporous filter, into a strip solution with EDTA, has been studied. Permeability coefficients of metal transport decreased with increasing of their atomic number except for Ce and Tm. At higher concentration of TOPO in the membrane, metal transport was faster, but the differences among the transport rates of the investigated elements decreased. A good separation of Ce from its binary mixtures with other investigated REE was achieved using DTPA as masking agent, added the feed solution.