Pd embedded N,S co‐doped graphene wrapped core‐shell magnetic nanospheres: Engineered stable nanocatalyst for Suzuki couplings

Designed nitrogen and sulfur co‐doped graphene wrapped magnetic core‐shell supported Pd nanoparticles were synthesized through the following steps. Firstly, Fe₃O₄ was prepared, coated with silica and then functionalized with amine groups to create a positive charge on the structure for enhancing the interaction of the Fe₃O₄@SiO₂ with graphene oxide. Secondary, the pre‐catalyst wrapped with graphene to enhance adsorption of aromatic substrates through π–π stacking. Thirdly, graphene was doped with nitrogen and sulfur to increase the grafting of Pd in hybrid. Finally, Pd NPs were attached on the surface of pre‐engineered structure to produce Fe₃O₄@SiO₂@N,S‐wG@Pd which exhibited high performance in Suzuki reactions. This superior activity can be indexed to the incorporation of N and S atoms into graphene led to high anchoring and well‐dispersion of Pd NPs on the nanocomposite surface offering large amounts of active centers, that strongly increased the interaction between Pd and substrates to decreases Pd leaching.     

Three‐Dimensional Nitrogen‐Doped Reduced Graphene Oxide–Carbon Nanotubes Architecture Supporting Ultrafine Palladium Nanoparticles for Highly Efficient Methanol Electrooxidation

A three‐dimensional (3D) nitrogen‐doped reduced graphene oxide (rGO)–carbon nanotubes (CNTs) architecture supporting ultrafine Pd nanoparticles is prepared and used as a highly efficient electrocatalyst. Graphene oxide (GO) is first used as a surfactant to disperse pristine CNTs for electrochemical preparation of 3D rGO@CNTs, and subsequently one‐step electrodeposition of the stable colloidal GO–CNTs solution containing Na₂PdCl₄ affords rGO@CNTs‐supported Pd nanoparticles. Further thermal treatment of the Pd/rGO@CNTs hybrid with ammonia achieves not only in situ nitrogen‐doping of the rGO@CNTs support but also extraordinary size decrease of the Pd nanoparticles to below 2.0 nm. The resulting catalyst is characterized by scanning and transmission electron microscopy, X‐ray diffraction, Raman spectroscopy, and X‐ray photoelectron spectroscopy. Catalyst performance for the methanol oxidation reaction is tested through cyclic voltammetry and chronoamperometry techniques, which shows exceedingly high mass activity and superior durability.     

Selective Hydrogenation of Citral over a Carbon‐titania Composite Supported Palladium Catalyst

A novel carbon‐titania composite material, C/TiO₂, has been prepared by growing carbon nanofibers (CNFs) on TiO₂ surface via methane decomposition using Ni‐Cu as a catalyst. The C/TiO₂ was used for preparing supported palladium catalyst, Pd/C/TiO₂. The support and Pd/C/TiO₂ catalyst were characterized by BET, SEM, XRD and TG‐DTG. Its catalytic performance was evaluated in selective hydrogenation of citral to citronellal, and compared with that of activated carbon supported Pd catalyst. It was found that the Pd/C/TiO₂ catalyst contains 97% of mesopores. And it exhibited 88% of selectivity to citronellal at citral conversion of 90% in citral hydrogenation, which was much higher than that of activated carbon supported Pd catalyst. This result may be attributed to elimination of internal diffusion limitations, which were significant in activated carbon supported Pd catalyst, due to its microporous structure.     

Metal–organic framework derived Pd/ZrO2@CN as a stable catalyst for the catalytic hydrogenation of 2,3,5‐trimethylbenzoquinone

Metal–organic frameworks (MOFs) have recently been identified as versatile sacrificing templates to construct functional nanomaterials for heterogeneous catalysis. Herein, we report a thermal transformation strategy to directly fabricate metal Pd nanoclusters inlaid within a ZrO₂@nitrogen‐doped porous carbon (Pd/ZrO₂@CN) composite using Pd@NH₂‐UiO‐66(Zr) as a precursor that was pre‐synthesized by a one‐pot hydrothermal method. The developed Pd/ZrO₂@CN as a robust catalyst delivered remarkable stability and activity to the catalytic hydrogenation of 2,3,5‐trimethylbenzoquinone (TMBQ) to 2,3,5‐trimethylhydroquinone (TMHQ), a key reaction involved in vitamin E production. The hydrogenation was carried out at 110 °C with 1.0 MPa H₂, and it resulted in 98% TMHQ yield as the sole product over five consecutive cycles, outperforming the analogue Pd/ZrO₂@C without nitrogen doping templated from Pd@UiO‐66(Zr). The excellent catalytic properties of Pd/ZrO₂@CN likely originated from the highly stable ultrafine Pd nanoclusters inlaid within ZrO₂@CN matrix on account of the strong interaction between N and Pd, as well as on the Lewis acidity of ZrO₂, which was beneficial to the hydrogenation.     

Facilitating a high‐performance photocatalyst for Suzuki reaction: Palladium nanoparticles immobilized on reduced graphene oxide‐doped graphitic carbon nitride

We prepared a non‐covalently coupled hybrid of reduced graphene oxide (rGO)‐doped graphitic carbon nitride (g‐C₃N₄) by freezing‐assisted assembly and calcination. Fourier transform infrared, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy confirmed that rGO was incorporated into the bulk g‐C₃N₄, which was an ideal support for loading Pd nanoparticles. The Pd nanoparticles with an average size of 4.57 nm were uniformly dispersed on the rGO‐doped g‐C₃N₄ surface. The layered structure provided large contact area of g‐C₃N₄ with rGO, further accelerating the electron transfer rate and inhibiting electron–hole recombination. Consequently, compared with Pd/rGO/g‐C₃N₄ and Pd/g‐C₃N₄, the Pd/rGO‐doped g‐C₃N₄ showed a prominent catalytic activity for visible‐light‐driven photocatalytic Suzuki–Miyaura coupling at ambient temperature. The Pd/rGO‐doped g‐C₃N₄ exhibited very high stability after six consecutive cycles with minimal loss of catalytic activity.     

Preparation of magnetic Fe3O4/P (GMA‐DVB)‐PEI/Pd highly efficient catalyst with core‐shell structure

In this paper, a simple route for palladium (Pd) nanoparticles attached to the surface of hollow magnetic Fe₃O₄/P (GMA‐DVB)‐polyethyleneimine (PEI) microspheres was established. Due to the large amount of imidogen groups and tertiary amine groups presenting in the PEI, Pd²⁺ ions could be anchored to the support by complexation with a polyfunctional organic ligand. Thereafter, a magnetic Pd catalyst having a high loading amount and good dispersibility was obtained by reducing Pd²⁺ ions. Afterwards, the prepared catalyst was characterized by TEM, SEM, FTIR, XRD, TGA, VSM, and UV–vis in detail. Ultimately, their catalytic activity was evaluated using the reduction of 4‐nitrophenol (4‐NP). Research showed that the Fe₃O₄/P (GMA‐DVB)‐PEI/Pd catalyst possessed high catalytic performances for the reduction of 4‐NP with a conversion rate of 98.43% within 540 s. Furthermore, the catalyst could be easily recovered and reused at least for nine successive cycles.     

Au‐ and Ag‐loaded MnO2 nanostructures supported on nitrogen‐ and nitrogen–sulfur‐doped pyroproteins: Synthesis and catalytic activity in organic transformations

Four novel Au‐ and Ag‐loaded MnO₂ nanostructures supported on nitrogen‐doped pyroprotein of natural silk (Au–MnO₂@PPNS and Ag–MnO₂@PPNS) and nitrogen–sulfur‐doped pyroprotein of natural wool (Au–MnO₂@PPNW and Ag–MnO₂@PPNW) have been synthesized. Nitrogen‐ and nitrogen–sulfur‐doped pyroproteins were prepared by carbonization of natural silk and wool proteins, respectively. The catalysts were investigated for the aerobic oxidation of aromatic hydrocarbons of petroleum naphtha and the aerobic oxidative synthesis of 2‐phenylbenzo[d ]thiazoles, 2‐phenyl‐1H ‐benzo[d ]imidazoles and 2‐phenyl‐4‐quinazolinones in the absence of any co‐promoter and additional oxidizing reagent. The prepared catalytic systems showed higher catalytic activity in comparison to aggregated catalysts.     

One‐Pot Synthesis of Carbon‐Supported Dendritic Pd‐Au Nanoalloys for Electrocatalytic Ethanol Oxidation

One‐pot synthesis of carbon‐supported Pd‐Au alloy nanoparticles with well‐defined dendritic shape (Pd‐Au_den/C) was achieved by co‐reduction of K₂PdCl₄/HAuCl₄ mixtures in a molar ratio of 1:1 with hydrazine in the presence of Vulcan XC‐72R. The prepared Pd‐Au_den/C exhibited significantly enhanced performance in the electrocatalytic oxidation of ethanol compared with dendritic Pd nanoparticles and a commercial Pd/C catalyst. Pd‐Au_den/C even showed higher durability in electro‐oxidation of ethanol than the supported catalyst prepared by the deposition of presynthesized dendritic Pd‐Au nanoparticles on the carbon support. The experimental results clearly indicate that enhanced interaction between nanoparticle catalysts and carbon support through the one‐pot synthesis protocol can improve the durability of the electrocatalysts.     

Synthesis,characterization and catalytic performance of core‐shell structure magnetic Fe3O4/P(GMA‐EGDMA)‐NH2/HPG‐COOH‐Pd catalyst

A strategy has been developed for the synthesis, characterization and catalysis of magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd core‐shell structure supported catalyst. The P(GMA‐EGDMA) polymer layer was coated on the surface of hollow magnetic Fe₃O₄ microspheres through the effect of KH570. The core‐shell magnetic Fe₃O₄/P(GMA‐EGDMA) modified by ‐NH₂ could be grafted with HPG. Then, the hyperbranched glycidyl (HPG) with terminal ‐OH were modified by ‐COOH and adsorbed Pd nanoparticles. The hyperbranched polymer layer not only protected the Fe₃O₄ magnetic core from acid–base substrate corrosion, but also provided a number of functional groups as binding sites for Pd nanoparticles. The prepared catalyst was characterized by UV–vis, TEM, SEM, FTIR, TGA, ICP‐OES, BET, XRD, DLS and VSM. The catalytic tests showed that the magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd catalyst had excellent catalytic performance and retained 86% catalytic efficiency after 8 consecutive cycles.     

A Non‐Phosgene Route Synthesis of Carbamate in Continuous Fixed Bed Reactor

A non‐phosgene route synthesis of carbamate was carried out in a continuous fixed‐bed reactor through oxidative carbonylation of aniline using palladium catalysts and sodium iodide as promoter. The activity, selectivity and stability of both carbon and alumina‐supported palladium catalysts were evaluated. It was found that the alumina‐supported catalyst system exhibited a higher activity and selectivity than that of the carbon‐supported system, and an average aniline conversion of 95.6% and carbamate selectivity of 74.6% were achieved for the Se‐Pd/Al₂O₃ catalyst after 91 h on stream. Reclamation analysis of the spent Pd/C catalyst suggested that the deactivation was mainly due to the leaching and sintering of palladium metal and the accumulation of insoluble chemicals on catalyst support also aggravated the decline of catalyst activity. When small amounts of selenium were added to the Pd/Al₂O₃ catalyst, its activity, selectivity and stability were significantly improved which indicated that a promotional effect existed for carbamate formation on a Pd‐Se catalyst system.     

Synthesis of N‐Doped Mesoporous Carbon Nanorods through Nano‐Confined Reaction: High‐Performance Catalyst Support for Hydrogenation of Phenol Derivatives

Traditional hard‐template methods for the preparation of mesoporous carbon structures have been well developed, but there are difficulties associated with complete filling of the organic precursors in ordered mesochannels and exact replication of the templates. Herein, mesoporous carbon nanorods (meso‐CNRs) were synthesized through thermal condensation of furfuryl alcohol followed by the nano‐confined decomposition of polyfurfuryl alcohol in silica nanotubes (SiO₂ NTs) with porous shells. Limited and slow release of gaseous water through the porous shells and finite polyfurfuryl precursor inside silica nanotubes are responsible for the formation of the mesoporous structures. Nitrogen can be doped into the meso‐CNRs by adding guanidine hydrochloride to the precursors. The nitrogen dopant not only stabilizes the ultrasmall and active Pd nanocatalyst in the meso‐CNRs but also increases the electron density of Pd and accelerates the dissociation of H₂, both of which increase the catalytic activity of the Pd catalyst in hydrogenation reactions.     

Enhanced catalytic performance of Pd‐Ga bimetallic catalysts for 2‐ethylanthraquinone hydrogenation

A series of Pd and Pd‐Ga bimetallic catalysts were prepared by a co‐impregnation method for 2‐ethylanthraquinone (EAQ) hydrogenation to produce hydrogen peroxide. Compared with 0.6Pd catalyst, the hydrogenation efficiency of 0.6Pd1.2Ga catalyst (11.9 g L^?1) increases by 32.2%, and the stability of 0.6Pd1.2Ga catalyst is also higher than that of 0.6Pd catalyst. The structures of the samples were determined by N₂ adsorption–desorption, ICP, XRD, CO chemisorption, TEM, H₂‐TPR, in situ CO‐DRIFTS and XPS. The results suggest that incorporation of Ga species improves Pd dispersion and generates a strong interaction between Ga₂O₃ and Pd interface or between Pd and support. DFT calculation results indicate that the strong adsorption of carbonyl group on Ga₂O₃/Pd interface facilitates the activation of EAQ and promotes the hydrogenation efficiency.     

Fe3O4‐SAHPG‐Pd0 nanoparticles: A ligand‐free and low Pd loading quasiheterogeneous catalyst active for mild Suzuki–Miyaura coupling and C?H activation of pyrimidine cores

This paper reports a green magnetic quasiheterogeneous efficient palladium catalyst in which Pd⁰ nanoparticles have been immobilized in self‐assembled hyperbranched polyglycidole (SAHPG)‐coated magnetic Fe₃O₄ nanoparticles (Fe₃O₄‐SAHPG‐Pd⁰). This catalyst has been used for effective ligandless Pd catalyzed Suzuki–Miyaura coupling reactions of different aryl halides with substituted boronic acids at room temperature and in aqueous media. Herein, SAHPG is used as support; it also acts as a reducing agent and stabilizer to promote the transformation of Pd^II to Pd⁰ nanoparticles. Also, this environmental friendly quasiheterogeneous catalyst is employed for the first time in the synthesis of new pyrimido[4,5‐b]indoles via oxidative addition/C? H activation reactions on the pyrimidine rings, which were obtained with higher yield and faster than when Pd(OAc)₂ was used as the catalyst. Interestingly, the above‐mentioned catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled several times with no significant decrease in the catalytic activity.     

Metal‐Free Electrocatalyst for Oxygen Reduction: Synthesis‐Controlled Density of Catalytic Centers and Impact on ORR

This work demonstrates a rapid and scalable route for the preparation of N‐doped carbon spheres of 80–120 nm via pyrolysis of polypyrrole as the only carbon and nitrogen source. The resulting porous catalyst has a nitrogen doping level of 6–8 at%. Electrochemical studies show that N‐doped C is very active toward oxygen reduction in alkaline electrolyte and the mechanism of ORR process is controlled by the surface concentration of catalytic active sites that promote either a direct four‐electron or two‐electron process. An interesting observation is that we can generate precursors for the N‐doped carbon with desirable particle size, shape and with the preferential structure (linear polypyrrole from the α? α coupling during slow polymerization or cross‐linked polypyrrole from α? β coupling during fast polymerization) that promotes the formation of favorable catalytic sites for O₂ reduction. The XPS analysis in conjunction with RDE voltammetry highlights the effect of polymer precursor synthesis on the chemical structure and a resulting electrochemical activity of the N‐doped carbon materials.     

Uniform silver nanoparticles on tunable porous N‐doped carbon nanospheres for aerobic oxidative synthesis of aryl nitriles from benzylic alcohols

Tunable N‐doped carbon nanospheres from sucrose as carbon source and Tris(2‐aminoethyl)amine (TAEA) as nitrogen source by a simple and easily reproducible method were prepared. It was demonstrated that the tunable N‐doping of carbon spheres could be realized by altering the ratio of TAEA in the raw materials. The content of doped nitrogen, surface area, pore volume and pore size of carbon nanospheres were increased with the increasing of TAEA amount in the hydrothermal process. Prepared N‐doped carbon nanospheres act as solid ligand for anchoring of Ag NPs which generated via chemical reduction of Ag ions. Benzylic alcohols and aldehydes were converted into the aryl nitriles by using Ag/N‐CS‐1 nanospheres as the catalyst and O₂ as the oxidant, efficiently. This catalyst was stable and could use for 6 successful runs.     

Triazine-based polymers as nanostructured supports for the liquid-phase oxidation of alcohols

A covalent triazine framework (CTF) was used as support for palladium nanoparticles (NPs) and Pd/CTF was applied as the catalyst in the selective oxidation of benzyl alcohol. N groups in the CTF appeared more efficient than those created on carbon nanotubes (CNTs) by NH₃/high‐temperature treatment in stabilizing Pd NPs against growth during the immobilization step. This assured a high metal dispersion, which led to a highly active and stable catalyst in the alcohol oxidation reaction. Indeed, Pd on the CTF was more stable in recycling than Pd on activated carbon (AC) and on nitrogen‐doped CNTs, particularly avoiding leaching of Pd NPs. Moreover, Pd on the CTF was less sensitive than Pd on AC to the decrease of reactant concentration. This in turn led to a higher selectivity to benzaldehyde (98 %) with a considerable activity (turnover frequency 1453 h^?1).     

Boosting the electrochemical performance of Li4Ti5O12 through nitrogen‐doped carbon coating

The poor electronic conductivity restricts the wide applications of Li₄Ti₅O₁₂ as anode materials in Li‐ion batteries. We report a facile approach to fabricate nitrogen‐doped carbon‐coated Li₄Ti₅O₁₂ through carbonizing pyrrole and pyridine at different temperatures. Comparative experiments demonstrated that the carbon content plays a key role in governing the cycling performance and rate capability of Li₄Ti₅O₁₂. The composites with higher carbon content exhibited superior cycling performance, and the composite prepared at 600 °C using pyridine as the carbon source gave the best cycling and rate performance.     

Dehydrogenation of Formic Acid at Room Temperature: Boosting Palladium Nanoparticle Efficiency by Coupling with Pyridinic‐Nitrogen‐Doped Carbon

The use of formic acid (FA) to produce molecular H₂ is a promising means of efficient energy storage in a fuel‐cell‐based hydrogen economy. To date, there has been a lack of heterogeneous catalyst systems that are sufficiently active, selective, and stable for clean H₂ production by FA decomposition at room temperature. For the first time, we report that flexible pyridinic‐N‐doped carbon hybrids as support materials can significantly boost the efficiency of palladium nanoparticle for H₂ generation; this is due to prominent surface electronic modulation. Under mild conditions, the optimized engineered Pd/CN_0.25 catalyst exhibited high performance in both FA dehydrogenation (achieving almost full conversion, and a turnover frequency of 5530 h^?1 at 25 °C) and the reversible process of CO₂ hydrogenation into FA. This system can lead to a full carbon‐neutral energy cycle.     

Active and recyclable ordered mesoporous magnetic organometallic catalyst as high‐performance visible light photocatalyst for degradation of organic pollutants

A novel light‐active magnetic Pd complex as a photocatalyst was prepared through bonding organometallics to mesoporous silica channels formed on the surface of silica‐coated iron oxide nanoparticles. The nanocomposite (denoted as Fe₃O₄@SiO₂@m‐SiO₂@PDA‐Pd(0); PDA = 1,10‐phenanthroline‐2,9‐dicarbaldehyde) is more efficient and has higher photocatalytic capability in the degradation of 2,4‐dichlorophenol under visible light irradiation compared with virgin Pd complex (PDA‐Pd). This noteworthy photodegradation activity can be due to the high dispersion of Pd nanoparticles. High yield, low reaction time and non‐toxicity of the catalyst are the main merits of this protocol. Also magnetic separation is an environmentally friendly alternative method for the separation and recovery of the catalyst, since it minimizes the use of solvents and auxiliary materials, reduces operation time and minimizes catalyst loss by preventing mass loss and oxidation. The produced Pd catalyst was characterised using various techniques. Furthermore, transmission electron microscopy characterization was used for determining the structural properties of the Pd nanocatalyst.     

Pt Nanoparticles Supported on Nitrogen‐Doped‐Carbon‐Decorated CeO2 for Base‐Free Aerobic Oxidation of 5‐Hydroxymethylfurfural

Currently, the base‐free aerobic oxidation of biomass‐derived 5‐hydroxymethylfurfural (HMF) to produce 2,5‐furandicarboxylic acid (FDCA) is attracting intense interest due to its prospects for the green, sustainable, and promising production of biomass‐based aromatic polymers. Herein, we have developed a new Pt catalyst supported on nitrogen‐doped‐carbon‐decorated CeO₂ (NC‐CeO₂) for the aerobic oxidation of HMF in water without the addition of any homogeneous base. It was demonstrated that the small‐sized Pt particles could be well dispersed on the surface of the hybrid NC‐CeO₂ support, and the activity of the supported Pt catalyst depended strongly on the surface structure and properties of the catalysts. The as‐fabricated Pt/NC‐CeO₂ catalyst, with abundant surface defects, enhanced basicity, and favorable electron‐deficient metallic Pt species, enabled an almost 100 % yield of FDCA in water with molecular oxygen (0.4 MPa) at 110 °C for 8 h without the addition of any homogeneous base, which is indicative of exceptional catalytic performance. Furthermore, this Pt/NC‐CeO₂ catalyst also showed good stability and reusability owing to strong metal–support interactions. An understanding of the role of surface structural defects and basicity of the hybrid NC‐CeO₂ support provides a basis for the rational design of high‐performance and stable supported metal catalysts with practical applications in various transformations of biomass‐derived compounds.