INVESTIGATION OF THE ATRP OF n-BUTYL METHACRYLATE USING THE Cu(I)/N,N,N′,N″,N″-PENTAMETHYLDIETHYLENETRIAMINE CATALYST SYSTEM

The polymerization of n-butyl methacrylate was investigated using the Atom Transfer Radical Polymerization technique with CuBr and CuCl/N,N,N′,N″,N″-pentamethyldiethylenetriamine catalytic systems. Various combinations of catalyst systems and initiators were utilized in order to optimize the polymerization conditions and to obtain well-defined polymers (i.e. controlled molecular weights and low polydispersities). It has been found that the optimal initiator for this system is a chlorine-based initiator, when the catalyst used is a Cu(I) salt in conjunction with the N,N,N′,N″,N″-pentamethyldiethylenetriamine ligand. Bromine-based initiators tend to result in large amounts of initial termination, leading to polymers with less than ideal chain end functionality, even if CuCl is used as the Cu(I) species to invoke the halogen exchange. Additionally, the effects of the polymerization temperature, copper(1) species and the initiator structure were determined.     

GROUP TRANSFER POLYMERIZATION OF ETHYL ACRYLATE WITH LEWIS ACID CATALYST

This paper reports the kinetics of group transfer polymerization (GTP)of ethyl acrylate (EA)with zinc iodide catalyst in 1,2-dichloroethane using dimethyl ketene methyl trimethylsilyl acetal (MTS) as initiator at 0℃and above 0℃. The amount of catalyst used was studied. When zinc iodide catalyst used is more than 10mol% relative to monomer, the rate of polymerization is proportional to the concentration of monomer, whereas zinc iodide catalyst used is less than 10 mol% of the monomer, the rate of polymerization is independent of the monomer concentration.In the GTP of EA an induction period was observed when the zinc iodide contents are less than l0mol%. If the reaction temperature is over 0℃, living species become unstable and diminish, leading to incomplete monomer conversion. The reaction curves equations are obtained. The polymers have narrow molecular weight distributions which are not changed as decreasing zinc iodide contents. The polydispersity is about 1.2.     

SYNTHESIS, CHARACTERIZATION AND NANOPARTICLE FORMATION OF STAR-SHAPED POLY(L-LACTIDE) WITH SIX ARMS

Well-defined star-shaped poly(L-lactide)with six arms(sPLLA)was synthesized via the ring-opening polymerization of L-lactide using dipentaerythritol as initiator and stannous octoate as catalyst in bulk at 125~C.The effects of molar ratios of both monomer to initiator and monomer to catalyst on the molecular weights of as-synthesized sPLLA polymers were in detail investigated.The molecular weights of sPLLA polymers linearly increased with the molar ratio of monomer to initiator,and the molecular weight d...     

Anionic Polymerization of Butadiene Using Lithium/Potassium Multi-metallic Systems: Influence on Polymerization Control and Polybutadiene Microstructure

Thermal,mechanical,and viscoelastic properties of polybutadiene-based rubber materials are highly dependent on polybutadiene microstructure.The use of polar modifier in association with alkyllithium is a well-known method to obtain polybutadiene with a high vinyl con tent.Another approach is to use bimetallic initiating species such as alkyllithium combined to heavier alkali metal alkoxide(RONa,ROK...).The polymerization control is n evertheless not achieved and several parameters were found to influe nee it.Using bimetallic in itiating systems based on alkyllithium and a potassium alkoxide,alkyllithium structure,initiator preformation time,and initiator composition were identified as parameters influencing the anionic polymerization process of butadiene and/or polybutadiene microstructure.In addition,the use of trimetallic systems based on alkyllithium,potassium alkoxide,and alkylaluminum was investigated in order to prevent side reactions regardless of the[K]/[Li]ratio and of the initiator preformation time.     

Novel acid initiators for the rapid cationic polymerization of styrene in room temperature ionic liquids

Cationic polymerization of styrene has been achieved using several novel acidic initiators in room temperature ionic liquids (ILs) under mild reaction conditions to obtain polymers of low molecular weight with narrow polydispersity. Both strong protic acids such as bis(trifluoromethanesulfonyl) amide acid (HTFSA) and a moderately weak acid such as bisoxalato phosphorous acid (HBOP) have been studied as initiators. It has been observed that HTFSA initiates the polymerization rapidly even at room temperature and below, as compared to HBOP which produces a slower polymerization requiring elevated temperatures to complete. The relative difference in reactivity of the initiators as compared to the previously described HBOB initiator is discussed in terms of the difference in their proton acidity and the consequential basicity of the anions. The efficiency of different ILs as the reaction solvent is also presented.     

NEW INITIATION SYSTEMS FOR ATOM TRANSFER RADICAL POLYMERIZATION

This review summarizes our achievements in designing new initiation systems for atom transfer radical polymerization (ATRP). First-order kinetics and extension experiments revealed the living nature of these reactions. Tailormade vinyl polymers with functional end groups were characterized by ^1H-NMR and UV-vis spectroscopic analyses. Replacing traditional radical initiators AIBN and BPO, carbon-carbon bond compounds, 1,1,2,2-tetraphenyl-l,2-ethanediol, diethyl 2,3-dicyano-2,3-diphenylsuccinate and diethyl 2,3-dicyano-2,3-di(p-tolyl)succinate, were utilized in reverse ATRP to produce the initiating radical. Sulfur-sulfur bond iniferter, tetraethylthiuram disulfide (TD), in conjunction with CuBr/bpy or NiCI2/PPh3 complex could control the styrene polymerization via redox reaction. Pseudo-halogen transfer reaction was demonstrated to maintain the dormant-active species equilibrium in normal and reverse ATRP with Cu(S2CNEt2), Cu(S2CNEt2)CI and Fe(S2CNEt2)3 as catalysts. The organic halide initiator and reduced transition metal compound that started the living polymerization were produced in situ from the components of TD/FeCI3/PPh3, TD/CuBr2/bpy and Fe(S2CNEt2)3/FeCI3/PPh3 systems. Accurate control of UV irradiation time favored the radical generation process in photo ATRP with the 2,2-dimethoxy-2-phenylacetophenone/Fe(S2CNEt2)3 initiation system.     

KINETIC STUDY OF GAS-PHASE POLYMERIZATION OF PROPENE BY THE INHIBITION METHOD USING CARBON MONOXIDE

The inhibition method using CO to determine the active center concentration C~* in olefin poly-merization and the kinetics of gas-phase polymerization of propene were studied. The reliabilityof the method when used in gas-phase polymerization of propene is proved and the influencing fac-tor of the method is found to be the "repeating inhibition" of CO to the active centers. The C~*, the rate constant k_P and the activation energy were determined from the experimentalresults. We concluded that the C~* decreases with polymerization time and coincides with the decayrate of the polymerization.     

STUDIES OF THE INITIATION MECHANISM OF VINYL POLYMERIZATION WITH THE SYSTEM PERSULFATE/N-ALKYL SUBSTITUTED ETHYLENEDIAMINE DERIVATIVES

Effects of N-alkyi substituted ethylenediamine derivatives on vinyl polymerization using persulfate as initiator were studied. The apparent kinetic equations and overall activation energies of acrylamide polymerization were determined using the above mentioned system as initiator. The promoting activities of different diamine derivatives on vinyl polymerization are in the order of tertiary diamine>secondary diamine>primary diamine. Diamines having methyl groups as the substituent on their nitrogen atom possess higher promoting activity than that of having larger alkyl groups. The initial free radicals produced through the redox reaction of persuifate and diamines were studied by spin strapping technique and ESR spectroscopy. The results obtained confirm the fact that the initial free radicals of the diamine species can initiate vinyl polymerization and become the amino end group of the resulting polymers.     

CONTROLLED/"LIVING" RADICAL POLYMERIZATION OF STYRENE IN AN AQUEOUS DISPERSION SYSTEM

Atom transfer radical polymerization (ATRP) of styrene catalyzed by cuprous (CuX)/1, 10-phenanthroline (Phen)and CuX/CuX_2/Phen was conducted in an aqueous dispersed system. A stable latex was obtained by using ionic surfactantsodium lauryl sulfonate (SLS) or composite surfactants, such as SLS/polyoxyethylene nonyl phenyl ether (OP-10),SLS/hexadecanol and SLS/OP-10/hexadecanol. Among which SLS and SLS/OP-10/hexadecanol systems established betterdispersed effect during the polymerization. It was found that Phen was a more suitable ligand than N,N,N',N",N"-pentamethyldiethylenetriamine (PMDETA) to maintain an appropriate equilibrium of the activator Cu(I) and the deactivatorCu(II) between the organic phase and the water phase. The effect of several initiators (such as EBiB, CCl_4 and 1-PEBr) andthe temperature on such a kind of ATRP system was also observed. The number-average molar mass (M_n) of polystyrene (PS)increased with the conversion and the molar mass distribution (M_w/M_n) remained narrow. These experimental data show thatthe polymerization could be controlled except for the quick increase of monomer conversion and the number-average molarmass of PS in the initial stage of polymerization. Furthermore, the initiator efficiency was found to be low (～57%) inCuX/Phen catalyzed system. To overcome this problem, Cu(II)X_2 (20 mol%-50 mol% based on CuX) was introduced intothe polymerization system. In this case, higher initiator efficiency (60%-90%), low M_w/M_n of PS (as low as 1.08) wereachieved and the molar masses of the PS fit with the theoretical ones.     

Atom transfer radical polymerization of methyl acrylate,methyl methacrylate and styrene in the presence of trolamine as a highly effective promoter

Transition metal-mediated atom transfer radical polymerization(ATRP) is a ‘‘living'/controlled radical polymerization. Recently, there has been widely increasing interest in reducing the high costs of catalyst separation and post-polymerization purification in ATRP. In this work, trolamine was found to significantly enhance the catalytical performance of Cu Br/N,N,N0,N0-tetrakis(2-pyridylmethyl) ethylenediamine(Cu Br/TPEN) and Cu Br/tris[2-(dimethylamino) ethylamine](Cu Br/Me6TREN). With the addition of 25-fold molar amount of trolamine relative to Cu Br, the catalyst loadings of Cu Br/TPEN and Cu Br/Me6 TREN were dramatically reduced from a catalyst-to-initiator ratio of 1 to 0.01 and 0.05,respectively. The polymerizations of methyl acrylate, methyl methacrylate and styrene still showed first-order kinetics in the presence of trolamine and produced poly(methyl acrylate), poly(methyl methacrylate) and polystyrene with molecular weights close to theoretical values and low polydispersities. These results indicate that trolamine is a highly effective and versatile promoter for ATRP and is promising for potential industrial application.     

INVESTIGATION OF THE ATRP OF n-BUTYL METHACRYLATE USING THE Cu(I)/N,N,N'''',N",N"-PENTAMETHYLDIETHYLENETRIAMINE CATALYST SYSTEM

INTRODUCTIONThe atom transfer radical polymerization (ATRP) has become an important method for preparing well-definedmacromolecules. This technique offers control over the molecular weights, the chain end functionalities, and thechain architectures[1-12]. It has been used extensively for the preparation of homopolymers, block, and randomcopolymers[13-39], for the preparation of organic/inorganic hybrid materials[40-54], as well as for combining variousother living polymerization methods …     

Ultrafast organocatalytic ring-opening polymerization of N-sulfonyl aziridine in the melt

An ultrafast approach for controlled synthesis of well-defined polysulfonamides is established through organocatalytic anionic ring-opening polymerization (ROP) of N-sulfonyl aziridine in the melt. Several different organobases are investigated, and it is found that N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) catalyzed ROP of 2-methyl-N-tosylaziridine (TsMAz) gives the desired polymer, while 1,4-diazabicyclo[2.2.2]octane (DABCO) and 1,8-diazabicyclo[5.4.0]-undec-7-ene (DBU) initiate the polymerization along with initiator to produce uncontrolled polymers. Using PMDETA as the catalyst, poly(2-methyl-N-tosylaziridine) with molecular weight over 100 kg/mol can be synthesized in less than 90 s. Various initiators, including carboxylic acid, N-sulfonyl amide, unactivated amine, phenol, and thiol, are applicable for this protocol to give the molecular weight and end-group controlled polymers under the open-flask condition. Combining this ultrafast ROP with ring-opening metathesis polymerization (ROMP), a brush copolymer is facile synthesized. This approach allows the ultrafast metal-free synthesis of polysulfonamide and expands the scope of initiators for the ROP of N-sulfonyl aziridines.     

A new tetradentate ligand for atom transfer radical polymerization

The properties of a ligand, including molecular structure and substituents, strongly affect the catalyst activity and control of the polymerization in atom transfer radical polymerization (ATRP). A new tetradentate ligand, N,N′‐bis(pyridin‐2‐ylmethyl‐3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED) was synthesized and examined as the ligand of copper halide for ATRP of styrene (St), methyl acrylate (MA), and methyl methacrylate (MMA), and compared with other analogous linear tetrdendate ligands. The BPED ligand was found to significantly promote the activation reaction: the CuBr/BPED complex reacted with the initiators so fast that a large amount of Cu(II)Br₂/BPED was produced and thus the polymerizations were slow for all the monomers. The reaction of CuCl/BPED with the initiator was also fast, but by reducing the catalyst concentration or adding CuCl₂, the activation reaction could be slowed to establish the equilibrium of ATRP for a well‐controlled living polymerization of MA. CuCl/BPED was found very active for the polymerization of MA. For example, 10 mol% of the catalyst relatively to the initiator was sufficient to mediate a living polymerization of MA. The CuCl/BPED, however, could not catalyze a living polymerization of MMA because the resulting CuCl₂/BPED could not deactivate the growing radicals. The effects of the ligand structures on the catalysis of ATRP are also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3553–3562, 2004     

Atom Transfer Radical Polymerization of N,N‐Dimethylacrylamide

Summary: The living polymerization of N,N‐dimethylacrylamide was achieved by atom transfer radical polymerization catalyzed by copper chloride complexed with a new ligand, N,N′‐bis(pyridin‐2‐ylmethyl 3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED). With methyl 2‐chloropropionate as the initiator, the polymerization reached high conversions (> 90%) at 80 °C and 100 °C, producing polymers with very close to theoretical values and low polydispersity. The ligand, temperature, and copper halide strongly affected the activity and control of the polymerization.

PDMA molecular weight and polydispersity dependence on the DMA conversion in the DMA bulk polymerizations at different temperatures: DMA/CuCl/MCP/BPED = 100/1/1/1, 100 °C (♦, ⋄); 80 °C (▴, ▵); 60 °C (▪, □); and DMA/CuCl/MCP/BPED = 100/1/1/2, 80 °C (•, ○).     

Homogeneous Solution Reverse Atom Transfer Radical Polymerization of Methyl Methacrylate

A homogeneous reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) was successfully carried out in N, N-dimethylformamide(DMF) (25%, v/v) at 69°C, using an initiating system azobisisobutyronitrile (AIBN)/CuBr₂/N, N, N′, N″, N″-pentamethyldiethylenetriamine (PMDETA). The kinetics of homogeneous solution polymerizations showed linear first-order rate plots, indicating a constant number of growing species throughout the polymerization as well as a negligible contribution of termination or transfer reactions; a linear increase of the number-average molecular weight with conversion, and relatively low polydispersities, but low initiator efficiency. The dependence of the rate of polymerization on the concentrations of initiator, catalyst, ligand and temperature were presented.     

ATRP of methyl methacrylate using a novel binol ester‐based bifunctional initiator

Novel bifunctional initiators [1,1′‐Bi‐2‐naphthol bis(2‐bromo‐2‐methylpropionate); (R)‐, (S)‐, and racemic‐] were synthesized from the esterification of 1,1′‐bi‐2‐naphthol and used as initiators in atom transfer radical polymerization (ATRP) in conjunction with N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA), and copper (I) bromide or copper (I) chloride. The initiators synthesized were completely characterized by UV, FTIR, NMR, and Mass spectroscopies. A detailed investigation of the ATRP of methyl methacrylate (MMA) with the bifunctional initiators (BBiBN) along with CuBr or CuCl/PMDETA catalyst system in anisole was carried out at 30 °C. Thus, MMA polymerization is shown to proceed with first‐order kinetics, with predicted molecular weight, and narrow polydispersity indices. The ATRP of glycidyl methacrylate (GMA) and tert‐butyl acrylate (tBA) were also performed with BBiBN initiator in conjunction with CuBr/PMDETA catalyst system. The polymerization of GMA was carried out at 30 °C, but tBA was polymerized at 60 °C. Gel permeation chromatography (GPC), FTIR, NMR, UV spectroscopies, and TGA were used for the characterization of the polymers synthesized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 902–915, 2004     

Homo and block copolymers of tert-butyl methacrylate by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of tert-butyl methacrylate (tBMA) was investigated using cuprous bromide with different ligands, solvents, deactivators, etc. The polymerization in bulk and diphenyl ether solvent system performed using Cu(I)Br complexed with N, N, N′, N″, N″-pentamethyldiethylenetriamine (PMDETA) catalyst in conjunction with 2-bromopropionitrile as an initiator at room temperature showed a curvature in the first-order kinetic plot. The controlled polymerization in methanol solution resulted in slower rate of polymerization and lower molecular weights. Well-defined diblock copolymers of PSt-b-PtBMA synthesized by polystyrene bromo macroinitiator (PSt-Br) with Cu(I)Cl/PMDETA catalyst system yielded predetermined molecular weights and lower polydispersities. Otherwise, the Cu(I)Br/PMDETA catalytic system showed an inefficient polymerization of tert-butyl methacrylate with lower molecular weights and higher polydispersities. Subsequent hydrolysis of the homopolymer refluxed in dioxane with addition of HCl afforded well-defined poly(methacrylic acid).     

Gel formation in atom transfer radical polymerization of 2‐(N,N‐dimethylamino)ethyl methacrylate and ethylene glycol dimethacrylate

Copolymers of 2‐(N,N‐dimethylamino)ethyl methacrylate (DMAEMA) and ethylene glycol dimethacrylate (EGDMA) were synthesized via atom transfer radical polymerization using ethyl 2‐bromoisobutyrate as the initiator, Cu(I)Br as the catalyst, and 1,1,4,7,10,10‐hexamethyltriethylene tetramine as the ligand. At low crosslinker levels, the polymerizations followed the first‐order kinetics. However, when the crosslinker level was above 10 mol %, the ln([M]₀/[M]) versus time curves showed deceleration at medium conversions because of the higher reactivity of EGDMA than that of DMAEMA. An acceleration at high conversions was also observed and probably caused by the diffusion limitations of catalyst/ligand complex in the polymer network. The hydrogels were characterized by swelling experiments, and the sol polymers were characterized by the size exclusion chromatographic technique to determine the number‐average molecular weight and polydispersity. The gel data were analyzed and, via a comparison to Flory's gelation theory, found to be more homogeneous than similar hydrogels prepared by conventional free‐radical polymerization methods. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3780–3788, 2001     

Atom Transfer Radical Polymerization of Styrene Using Multifunctional Iniferter Reagents as Initiators

Summary: Two multifunctional iniferters, 1,4-bis-(α-N,N-diethyldithiocarbamyl-isobutyryloxy)-benzene (BDCIB) and 1,3,5-tris-(α-N,N-diethyldithiocarbamyl-isobutyryloxy)-benzene (TDCIB), were successfully synthesized and used as initiators to initiate the polymerization of styrene in the presence of a CuBr/PMDETA complex. The polymerization results demonstrated that the kinetic plots in all cases were first-order to the monomer, the molecular weight of the polymers increased linearly with the monomer conversion; meanwhile, the molecular weight distribution of the polymer was kept to a very low value (M_w/M_n ≤ 1.35). Furthermore, the measured molecular weights were very close to the calculated values, which indicated the high efficiency of the initiator for the polymerization of styrene. The effect of catalyst concentration and initiator concentration was not obvious and the influence of polymerization temperature was apparent, and the polymerization rate increased with the polymerization temperature. The results of chain-extension and ¹H NMR analysis proved that the polymer obtained was capped with diethylthiocarbamoylthiy (DC) group.