全二维气相色谱/飞行时间质谱用于柴油组成的研究

将全二维气相色谱法(GC×GC)用于柴油馏分的组成分布研究,建立了两种GC×GC方法,一种用于柴油组成的详细表征,另一种用于柴油族组成的快速分离和定量,两种方法均不需要样品预处理。用前一种方法对柴油馏分中的烃类化合物、主要的含硫化合物与含氮化合物组成进行了研究;对催化裂解柴油中的27种含氮化合物和42种含硫化合物进行了定性;用后一种方法在70 min内即可完成柴油馏分族组成的定量分析,应用所建立的方法测定了4个不同来源的柴油馏分中非芳烃、一环芳烃、二环芳烃、三环芳烃的含量,定量结果与ASTM D2425法     

全二维气相色谱法用于不同石油馏分的族组成分布研究

一直以来采用化学法、色谱法或质谱法等多种方法联用分析不同石油馏分中一 些目标化合物和芳烃含量，但这些方法操作繁琐，迫切需要改进。作者采用全二维 气相色谱方法（GC×GC）研究不同沸程范围的蒸馏汽油、煤油柴油和裂化柴油的烷 烃（P）、烯烃＋环烷烃（O＋N）和1－4环芳烃（A）的族分离新方法。经过对柱系 统进行选择和对色谱条件进行优化，一个GC×GC方法即可实现对不同石油馏分的族 组成分离和目标化合物分离。用标准物对油品中一些特征组分进行定性，并对特征 组分和不同沸程的石油馏分的P，（O＋N），A族组成进行定量和比较，定量结果的 相对标准偏差（RSD）≤2.3。一个GC×GC方法便可完成原来要几个美国测试和材料 协会（ASTM）方法才能完成的任务。     

石油样品全二维气相色谱分析的分离特性

汽油、柴油等石油产品是典型的复杂混合物体系。一维气相色谱 (1DGC)分离能力不够 ,重叠十分普遍 ,定性不准确 ,族之间也不能分离干净。研究了全二维气相色谱 (GC×GC)用于石油样品分析的分离特性。对一特定的石脑油进行研究 ,一次进样实现了烷、环烷和芳烃 (PNA)的族分离。与 1DGC比较 ,GC×GC的正交分离、族分离、瓦片效应等特性使其峰容量大、灵敏度高、定性更简单准确 ,适合复杂混合物体系的分析 ,也是一种检测痕量杂质的有效手段。     

全二维气相色谱-氢火焰离子化检测器定性定量分析柴油中的多环芳烃

提出了全二维气相色谱-氢火焰离子化检测器(GC×GC-FID)定性定量分析柴油中多环芳烃的方法。利用全二维气相色谱-飞行时间质谱法(GC×GC-TOF MS)确定柴油芳烃的4个族组成,分别为非芳烃、一环芳烃、二环芳烃和三环⁺芳烃,获得37种定性化合物;采用峰面积归一化法对多环芳烃进行定量。结果表明：柴油质控样中多环芳烃测定值的相对误差绝对值不大于5.0%;对柴油样品进行回收试验,回收率为95.7%～104%,测定值的相对标准偏差(n=6)为1.7%～4.3%。方法用于7种实际柴油样品分析,并与NB/SH/T 0806-2022进行比对,结果显示两种方法测定值的相对误差绝对值均不大于5.0%。     

喷气燃料裂解产物中芳烃的全二维气相色谱-质谱分析

采用全二维气相色谱-质谱联用仪(GC×GC-MS),通过优化程序升温和调制周期,建立了喷气燃料裂解产物中芳烃的定性定量分析方法。该方法对多环芳烃(PAH)同分异构体具有良好的分离能力。利用MS检测器谱库检索结果、芳烃标准品及相关的文献报道,对喷气燃料裂解产物中常见的单环芳烃、二环芳烃、三环芳烃及四环芳烃等共27种芳烃进行了准确定性,并利用外标GC×GC-FID法对其进行定量。定量结果表明,芳烃含量均随着裂解产气率的增加而增大,当裂解产气率达到22%时,二环芳烃开始产生,且其含量随着裂解产气率的增加呈指数形式增加。该方法与传统的气相色谱-质谱相比,具有更好的分离及定性能力,可应用于复杂样品的分离及其定性定量分析。     

气质联用仪法测定奶粉中多环芳烃

研究了奶粉中多环芳烃的气相色谱/质谱(GC/MS)测定方法. 样品经甲醇-KOH皂化后用甲苯提取, 提取液经微孔滤膜过滤后用气相色谱质谱仪测定其含量, 外标法定量. 结果16种PAHs的回收率范围为92.0%～106%;RSD为2.2%～4.7%. 方法能同时分离16种PAHs, 适合于奶粉中多环芳烃的分析测定.     

基于全二维气相色谱-四极杆飞行时间质谱高通量检测独活挥发油化学成分

利用全二维气相色谱-四极杆飞行时间质谱(GC×GC-QTOF MS)建立了一种适用于独活挥发油化学成分的高通量检测方法,样品经水蒸气蒸馏提取后,直接采用全二维气相色谱进行分离,并根据谱库匹配、保留指数及精确质量数进行定性确认.结果表明,共分离鉴定了独活挥发油中207种化学成分,其中正向、反向匹配因子大于800的化合物占...     

全二维气相色谱在石油地质样品分析中的应用进展

对石油地质样品的化学组成进行全面准确的剖析,可以获得丰富的地球化学信息,为油气勘探工作提供科学依据。然而,该类样品除了组成复杂之外,还易受到各种物理（如蒸发、乳化、扩散、溶解和吸附）、化学（如光降解）和生物（如微生物降解）过程的影响。这些特点给样品的分析研究工作带来了极大的困难,传统的一维气相色谱/质谱技术很难对其进行理想的分离。全二维气相色谱（GC×GC）作为新发展起来的一种分离技术,在复杂样品分析方面具有独特的优势,虽然在石油地质样品分析中的应用相对较晚,但也日益受到关注。本文主要综述了近5年来GC×GC在石油地质方面国内外的研究进展以及存在的主要问题,并对今后的研究进行了展望。     

气相色谱/质谱法测定熏肉中的多环芳烃

建立了熏肉中多环芳烃的气相色谱/质谱(GC/MS)测定方法。样品经正己烷-丙酮(体积比为1∶1)超声波提取、氧化铝柱净化后,用GC/MS分离测定。优化了25种多环芳烃(PAHs)化合物的分离测定条件。结果 25种PAHs回收率范围为48.5%-106.5%;日内(n=7)相对标准偏差为3.75%-7.95%。方法具有灵敏度高、准确度好、能同时分离测定20余种多环芳烃化合物的优点,适合于熏肉中多环芳烃化合物的分析测定。     

生物制药研究中的多维色谱

对全二维气相色谱(GC×GC)、全二维液相色谱(HPLC×HPLC)、多维毛细管电泳等多维分离技术在生物制药研究中的应用进行了综述,其中对作者所在研究组在全二维气相色谱应用于中药及固相萃取-液相色谱联用分析系统等方面的工作做了重点介绍。由所综述的生物制药研究得出结论：多维分离方法以其高分辨、快速、自动化等特点已经在生物制药领域显示出它的巨大优势,并将发挥更大的作用。     

Analysis of aromatic compounds in gasoline with flow-switching comprehensive two-dimensional gas chromatography

A comprehensive two-dimensional gas chromatography (GC x GC) instrument has been created by coupling a flow-switching modulator and a standard gas chromatograph. The instrument was used to characterize the aromatic composition of gasoline. The high-resolution separation produced by flow-switching GC x GC allowed gasoline aromatics to be fully resolved from saturated components. The aromatic compounds were further separated into groups having the same carbon number. A standard gasoline sample was analyzed to evaluate the quantitative accuracy and precision of this technique. The data show that flow-switching GC x GC produces results that are comparable to gas chromatography-mass spectrometry (GC-MS) and thermal modulation GC x GC. The simple, low-cost, and robust nature of flow-switching GC x GC makes it an ideal technique for the routine analysis of aromatic compounds in gasoline.     

Characterization of complex hydrocarbons in cigarette smoke condensate by gas chromatography-mass spectrometry and comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry

Gas chromatography-mass spectrometry with electron ionization and positive-ion chemical ionization and comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry (GC x GC-TOF-MS) were applied for the characterization of the chemical composition of complex hydrocarbons in the non-polar neutral fraction of cigarette smoke condensates. Automated data processing by TOF-MS software combined with structured chromatograms and manual review of library hits were used to assign the components from GC x GC-TOF-MS analysis. The distributions of aliphatic hydrocarbons and aromatics were also investigated. Over 100 isoprenoid hydrocarbons were detected, including carotene degradation products, phytadiene isomers and carbocyclic diterpenoids. A total of 1800 hydrocarbons were tentatively identified, including aliphatic hydrocarbons, aromatics, and isoprenoid hydrocarbons. The identified hydrocarbons by GC x GC-TOF-MS were far more than those by GC-MS.     

Quantitative Determination of BTEX and Total Aromatic Compounds in Gasoline by Comprehensive Two-Dimensional Gas Chromatography (GC×GC)

Comprehensive two-dimensional gas chromatography (GC×GC) has been applied to the quantitative analysis of benzene, toluene, ethylbenzene, xylenes (BTEX), and all heavier aromatic compounds in gasoline. The two-dimensional chromatographic separation used volatility selection on the first-dimension column and polarity selection on the second-dimension column. In the resulting GC×GC chromatogram, aromatic species were resolved from other compound classes. Moreover, structurally related aromatics were grouped in a manner that facilitated identification and integration. The response of a flame ionization detector to each major aromatic group in gasoline was calibrated using internal standards. Quantitation produced results directly comparable with ASTM standard methods. The present GC×GC method can be expanded to analyze other gasoline components.     

Characterisation of middle-distillates by comprehensive two-dimensional gas chromatography (GC x GC): A powerful alternative for performing various standard analysis of middle-distillates

The detailed characterisation of middle distillates is essential for a better understanding of reactions involved in refining process. Owing to higher resolution power and enhanced sensitivity, comprehensive two-dimensional gas chromatography (GC x GC) is a powerful tool for improving characterisation of petroleum samples. The aim of this paper is to compare GC x GC and various ASTM methods -- gas chromatography (GC), liquid chromatography (LC) and mass spectrometry (MS) -- for group type separation and detailed hydrocarbon analysis. Best features of GC x GC are demonstrated and compared to these techniques in terms of cost, time consumption and accuracy. In particular, a new approach of simulated distillation (SimDis-GC x GC) is proposed: compared to the standard method ASTM D2887 it gives unequal information for better understanding of conversion process.     

One-dimensional and comprehensive two-dimensional gas chromatography coupled to soft photo ionization time-of-flight mass spectrometry: a two- and three-dimensional separation approach

Soft laser photo-ionization mass spectrometry is presented as a separation dimension hyphenated with gas chromatographic techniques. Single photon ionization (SPI) is a universal soft ionization method which ionizes organic molecules with an ionization potential below 10.5 eV if 118 nm laser radiation is used. The inherently soft ionization of photo ionization techniques can further be utilized together with gas chromatography as a comprehensive two-dimensional separation method (GC x MS), using the GC retention time as first separation dimension and the molecular mass as second separation dimension. Some GC x MS chromatograms of diesel petroleum samples using SPI are presented and discussed. Finally, it is demonstrated that the coupling of soft SPI mass spectrometry with comprehensive two-dimensional gas chromatography (GC x GC) provides a three-dimensional separation technique (GC x GC x SPI-MS).     

薄荷卷烟中香味成分的全二维气相色谱/飞行时间质谱分析

采用全二维气相色谱/飞行时间质谱法(GC×GC/TOFMS),以较长的非极性柱DB-5MS(30m×0.25mm×0.25μm)作为第一维柱,较短的中等极性柱DB-17MS(2m×0.1mm×0.1μm)作为第二维柱,利用固相微萃取法作为香味成分的萃取方法,对薄荷型ESSE卷烟的核心香味成分进行了定性分析,TOFMS谱图库检索结合全二维特有的包含结构信息的二维谱图,通过族分离和结构谱图鉴定,共鉴定了187种挥发性成分,其中对香气有贡献的成分118种.     

Evaluation of a retention model in comprehensive two-dimensional gas chromatography

Modeling the retention in comprehensive two-dimensional gas chromatography (GC x GC) was achieved using retention indices obtained in conventional GC. Predicted results were compared with experimental data obtained in the two-dimensional separation of a synthetic hydrocarbon mixture. This proved to be helpful in optimizing the operating conditions of GC x GC separation of a complex petroleum sample and in identifying chemical families.     

全二维气相色谱-飞行时间质谱联用技术分析重馏分油中芳烃组成

通过对升温速度、二维补偿温度、调制周期等关键实验参数的优化,建立了全二维气相色谱-飞行时间质谱(GC×GC-TOF MS)分析重馏分油中芳烃组分的方法,得到了重馏分油芳烃组分按环数分布的二维点阵图。根据谱库检索、标准化合物对照及文献报道,对重馏分油芳烃组分中菲、甲基菲及芘、苯并蒽等常见多环芳烃(PAH)进行了准确定性,并将该方法应用到重馏分油加氢处理工艺研究中,对菲、芘的加氢处理产物进行了定性分析。该研究为重馏分油芳烃组分的准确定性提供了新的技术手段,为加深对油品加氢规律的认识提供了技术支持。全二维气相色谱与普通一维色谱对比,在重馏分油的芳烃组分分析上体现了极大优势。     

大气有机物热脱附-全二维气相色谱-火焰离子化分析方法

全二维气相色谱（GC×GC）是20世纪90年代发展起来的具有高分辨率、高灵敏度、高峰容量等优势的分离技术,在我国将其用于大气挥发性有机物（VOCs）研究方面才刚刚起步.本文将GC-GC与氢火焰离子化检测器（FID）联用,构建了用于测量大气有机物的热脱附-全二维气相色谱-氢火焰离子化分析系统（TD-GC×GC-FID）.采用HP-5MS和HP-INNOWAX色谱柱,建立了C5-C15大气有机物分析方法,实现了一次分析过程同时分离非甲烷烃（NMHCs）、含氧挥发性有机物（OVOCs）和卤代烃等多种组分.利用标准物质和四级杆质谱（qMS）进行定性,外标法结合FID质量校正因子定量.目标物在GC-GC谱图中第一和第二维保留时间变化分别小于0.6s和0.02s,峰体积平均相对标准偏差为14.3%,其中烷烃和芳香烃为4.5%.标准曲线r2均值大于0.99,平均检出限为6.04ng,平均回收率为111%.利用该方法检测到2010年1月北京市区大气中400多种有机物（信噪比大于50）,鉴定了其中的103种物质,包括烷烃、烯烃、芳香烃、卤代烃、醛、酮、酯、醇和醚等.所测定有机物平均总浓度为51.3×10-9V/V,其中OVOCs约占51%,芳香烃约占30%,烷烃约占15%,卤代烃和烯烃分别占3%和1%.平均浓度最高的前3个组分是乙醇（9.84×10-9V/V）、丙酮（6.72×10-9V/V）和甲苯（3.48×10-9V/V）.