Ion mobility spectrometry detection for gas chromatography

The hyphenated analytical method in which ion mobility spectrometry (IMS) is coupled to gas chromatography (GC) provides a versatile alternative for the sensitive and selective detection of compounds after chromatographic separation. Providing compound selectivity by measuring unique gas phase mobilities of characteristic analyte ions, the separation and detection process of gas chromatography-ion mobility spectrometry (GC-IMS) can be divided into five individual steps: sample introduction, compound separation, ion generation, ion separation and ion detection. The significant advantage of a GC-IMS detection is that the resulting interface can be tuned to monitor drift times/ion mobilities (as a mass spectrometer (MS) can be tuned to monitor ion masses) of interest, thereby tailoring response characteristics to fit the need of a given separation problem. Because IMS separates ions based on mobilities rather than mass, selective detection among compounds of the same mass but different structures are possible. The most successful application of GC-IMS to date has been in the international space station. With the introduction of two-dimensional gas chromatography (2D-GC), and a second type of mobility detector, namely differential mobility spectrometry (DMS), GC prior to mobility measurements can now produce four-dimensional analytical information. Complex mixtures in difficult matrices can now be analyzed. This review article is intended to provide an overview of the GC-IMS/DMS technique, recent developments, significant applications, and future directions of the technique.     

A Fluorescent coumarinylalkyne probe for the selective detection of mercury(II) ion in water

A coumarin-based alkyne was developed as a fluorescent chemodosimeter for the selective detection of mercuric ion. It showed a high selectivity and sensitivity to mercury(II) ion over other metal ions in water.     

重力驱动多相层流分离离子选择性电极检测集成化微流控芯片系统

将微流控芯片多相层流分离技术与离子选择性电极检测技术联用,利用重力驱动的芯片多相层流分离系统,在线净化生物(血液)试样.同时,在芯片上加工微离子选择性电极进行待测物的在线检测,实现整体分析系统的芯片集成化,并将其用于血样中K⁺的测定.对5.5×10^-3mol/L钾溶液5次平行测定的相对标准偏差(RSD)为5.6%,检出限为6.8×10^-5mol/L,线性范围10^-4～10^-1mol/L.     

Ion mobility detection after supercritical fluid chromatography

Using a unidirectional flow ion mobility detector, non-selective detection, tunable selective detection, and complete Fourier transformed ion mobility spectra were successfully obtained after supercritical fluid chromatography on compounds with higher molecular weights than have been previously investigated. In the most selective mode, single oligomers from polymeric material could be independently detected. Using the Fourier transform capabilities of this instrument, complete ion mobility spectra for each oligomer could be obtained in a single chromatographic separation. The collection of individual ion mobility spectra of the components of polymeric material has not been possible prior to the technique described in this paper. Only complex ion mobility spectra of polymeric mixtures are available in the literature. The spectra obtained in this study are all simple, uncomplicated spectra consisting of only one or two product ion peaks. K_o values reported in this work range from 0.633 to 1.61, which are some of the lowest values ever reported in ion mobility spectrometry. With the unidirectional flow design of the detector, the supercritical fluid mobile phase, carbon dioxide, was efficiently eliminated from the detector so that the ion mobility spectrometer could be operated in its normal manner. The fact that CO₂ did not interfere with normal ion mobility operation indicates that other supercritical fluids may also be compatible with this sensitive and versatile detection method.     

HPLC-MS of anthraquinoids, flavonoids, and their degradation products in analysis of natural dyes in archeological objects

LC with MS detection was optimized for sensitive and selective analysis of main classes of natural dyes used in ancient times for dyeing textiles -- red anthraquinoids, yellow flavonoids, and known degradation products of flavonols -- hydroxybenzoic acids. Fragmentation patterns of both negative and positive molecular ions for the above mentioned compounds were investigated. Three acquisition modes of MS analysis: scanning, SIM, and multiple reaction monitoring (MRM) in both positive and negative ion modes were optimized and compared with each other and with the UV-Vis diode-array detection. Even though in the applied chromatographic system formic acid was used in the mobile phase, SIM in the negative ion mode was the most selective and sensitive detection for all the investigated compounds when both mixtures of standards and analysis of extracts from archeological samples were concerned, with one exception -- alizarin, for which MS detection in positive ion mode was more sensitive. Detection limits obtained with MS detection for all investigated compounds except quinizarin were lower than the ones obtained with the diode-array UV-Vis detection, making MS detection the most suitable tool for the analysis of natural dyes and their degradation products in extracts from archeological samples.     

Electron capture ion mobility spectrometry for the selective detection of chlorinated and brominated species after capillary gas chromatography

This paper reports the first investigation of electron capture ion mobility spectrometry as a detection method for capillary gas chromatography. In previous work with negative ion mobility detection after gas chromatography, the principal reactant ion species were O₂^? or hydrated O₂^? due to the presence of oxygen in the drift gas. These molecular reactant ions have a mobility similar to chloride and bromide ions, which are the principal product ions formed by most halogenated organics via dissociative ion-molecule reactions. Oxygenated reactant ions thus interfere with the selective detection of chloride and bromide product ions. A recently described ion mobility detector design efficiently eliminated ambient impurities, including oxygen, from infiltrating the ionization region of the detector; consequently, in the negative mode of operation, the ionization species with N₂ drift gas were thermalized electrons. Thermalized electrons have a high mobility and their drift time occupies a region of the ion mobility spectrum not occupied by chloride, bromide, or other product ions. The result was improved selectivity for halogenated organics which ionize by dissociative electron capture. This was demonstrated by the selective detection of 4,4′-dibromobiphenyl from the components of a polychlorinated biphenyl mixture (Aroclor 1248).     

Highly Selective “Turn‐On” Fluorescent and Colorimetric Sensing of Fluoride Ion Using 2‐(2‐Hydroxyphenyl)‐2,3‐dihydroquinolin‐4(1 H)‐one based on Excited‐State Proton Transfer

A simple, highly selective and sensitive colorimetric system for the detection of fluoride ion in an aqueous medium has been developed using 2‐(2‐hydroxyphenyl)‐2,3‐dihydroquinolin‐4(1 H)‐one. This system allows selective “turn‐on” fluorescence detection of fluoride ion, which is found to be dependent upon guest basicity. An excited‐state proton transfer is proposed to be the signaling mechanism, which is rationalized by DFT and TD‐DFT calculations. The present sensor can also be applied to detect fluoride levels in real water samples.     

Nafion‐modified Carbon Based Sensor for Soil Potassium Detection

In the present investigation, we report a voltammetric sensor based on Nafion modified screen printed carbon ink functionalized with 4‐aminobenzo‐18‐crown‐6 ether for the detection of soil potassium. The potassium is one of the major nutrient elements required by the plants and is critical for the crop productivity. The selective and sensitive assay is based on recording change in current signal of a positively charged redox probe, hexammineruthenium(III)chloride in the absence and presence of K⁺ ion in solution. The sensing interface is highly stable and reproducible for detection of K⁺ ion a under a wide range of concentration 1 to 500 ppm. The detection sensitivity over a wide concentration range was achieved by altering the concentration of redox species. Mechanistically, the recognition properties of 4‐aminobenzo‐18‐Crown‐6 covalently bound to the Nafion on carbon surface was found to be selective for potassium ion over sodium, ammonium and calcium ion. Potassium recognition through host‐guest binding of crown ether derivative and proposed simplicity of fabrication protocol makes the systems highly promising for real‐time applications in soil analysis.     

Selective determination of ammonium ions by high-speed ion-exclusion chromatography on a weakly basic anion-exchange resin column

This paper describes an ion-exclusion chromatographic system for the rapid and selective determination of ammonium ion. The optimized ion-exclusion chromatographic system was established with a polymethacrylate-based weakly basic anion-exchange resin column (TSKgel DEAE-5PW) as the separation column, an aqueous solution containing 0.05 mM tetramethylammonium hydroxide (pH 9.10) as eluent with conductimetric detection for the analyte determination. Under the optimum chromatographic conditions, ammonium ion was determined within 2.3 min with a detection limit (S/N=3) better than 0.125 microM. Ammonium ion in rain and river waters was precisely determined using this ion-exclusion chromatographic system.     

组织胺敏感离子选择性微电极及其应用

合成了四对三氟甲基苯硼酸钠和三氟甲基苯硼－组织胺离子缔合牧，以该离子缔合物为对组织胺敏感的电活性物，进行了组织胺离子选择性的研究，同时制备了对 敏感的双通道离子选择性 电极，并对电极进行了考核。     

Fluorescence "Turn-On" chemosensor for the selective detection of beryllium

A new fluorogenic method for selective and sensitive determination of beryllium using 2,6-diphenyl-4-benzo-9-crown-3-pyrane (DBCP) was developed. The proposed fluorescent probe undergoes fluorescent emission intensity enhancement upon binding to beryllium ions in MeOH/H(2)O (70:30, v/v) solution. The fluorescence enhancement of DBCP is attributed to a 1:1 complex formation between DBCP and Be(2+) ion, which has been utilized as the basis for selective detection of Be(2+) ion. With the optimum condition described, the fluorescence enhancement at 531 nm was linear to the concentration of beryllium in the range of 1.6×10(-8)-1.6×10(-7) M and a detection limit of 1.5×10(-9) M. The fluorescent probe exhibits high selectivity for Be(2+) ion over the other common mono, di- and trivalent cations.     

Direct determination of uranyl ion by nanosecond dye-laser spectroscopy

A sensitive and selective technique for the detection and assay of the uranyl ion is described. The technique is based upon the measurement of the lumi.     

Highly sensitive fluorescent probe for selective detection of Hg2+ in DMF aqueous media

A highly sensitive fluorescent probe 1 for selective detection of Hg ion in mixed N,N-dimethylformamide aqueous media was designed and prepared by incorporating the well-known Rhodamine 6G fluorophore and a carbohydrazone binding unit into one molecule. The fluorescent probe 1 can detect the parts per billion level of HgII in a mixed aqueous environment and displays a highly selective response of fluorescence enhancement toward HgII.     

Remarkable ESIPT induced NIR emission by a selective colorimetric dibenzimidazolo diimine sensor for acetate

A new dibenzimidazolo diimine sensor (DDS) has been designed and synthesized for selective detection of acetate ion. Significant naked eye recognized color change of DDS solution from light yellow to pink upon addition of only acetate ion is accompanied with near infra red (NIR) emission exploiting excited state intramolecular proton transfer (ESIPT).     

氟离子仪器分析方法研究进展

近几年社会公众对氟离子的关注度显著提高,氟离子含量的检测技术也在不断更新和发展。该文介绍了氟离子含量测定的各类仪器分析技术及其优缺点,主要包括氟离子选择电极法、离子色谱法、反相-高效液相色谱法以及气相色谱法。     

Determination of size, concentration and elemental composition of colloids with laser-induced breakdown detection/spectroscopy (LIBD/S)

The application of laser-induced breakdown detection (LIBD) as a new and powerful particle-analyzing technique for the determination of solubility data by monitoring initial colloid generation, when the metal ion concentration just exceeds the solubility at a given pH value, is investigated. Laser-induced breakdown spectroscopy (LIBS) is used for selective analysis of an aqueous suspension of lanthanide oxide particles in the presence of the respective lanthanide aquo ion. The detection limit for aquo ion and oxide particle is determined. On the basis of the different detection limits, the LIBS technique is used to study the formation of hydroxide colloids in aqueous solution by varying the pH value until the solubility limit is exceeded. LIBS enables both qualitative and quantitative monitoring of particle formation without artifacts arising from other contaminants. LIBD and LIBS are described and compared. The advantages and disadvantages of the methods for the determination of solubility data are discussed.     

An All‐solid‐state Polymeric Membrane Ca2+‐selective Electrode Based on Hydrophobic Alkyl‐chain‐functionalized Graphene Oxide

An all‐solid‐state polymeric membrane Ca²⁺‐selective electrode based on hydrophobic octadecylamine‐functionalized graphene oxide has been developed. The hydrophobic composite in the ion‐selective membrane not only acts as a transduction element to improve the potential stability for the all‐solid‐state Ca²⁺‐selective electrode, but also is used to immobilize Ca²⁺ ionophore with lipophilic side chains through hydrophobic interactions. The developed all‐solid‐state Ca²⁺‐selective electrode shows a stable potential response in the linear range of 3.0×10⁻⁷–1.0×10⁻³ M with a slope of 24.7±0.3 mV/dec, and the detection limit is (1.6±0.2 )×10⁻⁷ M (n =3). Additionally, due to the hydrophobicity and electrical conductivity of the composite, the proposed all‐solid‐state ion‐selective electrode exhibits an improved stability with the absence of water layer between the ion‐selective membrane and the underlying glassy carbon electrode. This work provides a simple, efficient and low‐cost methodology for developing stable and robust all‐solid‐state ion‐selective electrode with ionophore immobilization.     

一个高度灵敏和高选择性铝离子比率探针的合成及应用

本文构建了一种基于3-苯丙噻唑基-2-羟基-5-甲基苯甲醛的荧光探针用于检测铝离子。该荧光探针能够灵敏、高选择性地检测铝离子,并显示出颜色和强烈的荧光变化双重响应。研究结果表明,该探针对铝离子表现出非常好的荧光增强效果,检测过程中其它金属离子不会对检测结果产生明显的干扰。其比率荧光强度(I490/I567)与铝离子的浓度(0~20μmol/L)之间具有良好的线性关系,检测限低至0.5μmol/L。由于具有高效的选择性,该探针可以用于检测污染河水中的铝离子含量。     

Selective detection of specific protein-ligand complexes by electrosonic spray-precursor ion scan tandem mass spectrometry

A novel mass spectrometric method for the selective detection of specific protein-ligand complexes is presented. The new method is based on electrosonic spray ionization of samples containing protein and ligand molecules, and mass spectrometric detection using the precursor ion scanning function on a triple quadrupole instrument. Mass-selected intact protein-ligand complex ions are subjected to fragmentation by means of collision-induced dissociation in the collision cell of the instrument, while the second mass analyzer is set to the m/z of protonated ligand ions or their alkali metal adducts. The method allows for the detection of only those ions which yield ions characteristic of the ligand molecules upon fragmentation. Since the scan range of first analyzer is set well above the m/z of the ligand ion, and the CID conditions are established to permit fragmentation of only loosely bound, noncovalent complexes, the method is specific to the detection of protein-ligand complexes under described conditions. Behavior of biologically specific and nonspecific complexes was compared under various instrumental settings. Parameters were optimized to obtain maximal selectivity for specific complexes. Specific and nonspecific complexes were found to show markedly different fragmentation characteristics, which can be a basis for selective detection of complexes with biological relevance. Preparation of specific and nonspecific complexes containing identical building blocks was attempted. Complex ions with identical stoichiometry but different origin showed the expected difference in fragmentation characteristics, which gives direct evidence for the different mechanism of specific versus nonspecific complex ion formation.     

Zinc(II) mediated imine-enamine tautomerization

Reduction of imine-anthracenone compounds selectively produces secondary alcohols leaving the external imine group unreacted. Addition of the Zn(II) ion induces a metal-mediated imine-enamine tautomerization reaction that is selective for Zn(II), a new fluorescence detection method not previously observed for this important cation.